Deletion of network activities

Hi Gurus,
I am facing this problem here, where the client has created a project and released the same.
Now they want to delete certain activity elements, activities, networks & WBSE.
We are able to delete the activity elements, activities and Network, but not WBSE as there are POs created for that WBSE.
To delete the networks, the bottom up approach was followed, ie. first we deleted the activity elements, then the activity and then set the status for networks as TECO, and set the deletion flag.
Now the networks and activities are gone, but the costs still exist in the project. How to
update the costs and remove the costs for the activities that have been deleted.
Pls guide.
Regards,
VikasD

Hi
First reverse the GR document if you posted aganist the PO, then you delete the PO item and then PR.Then you try to delete the 3 level WBSE. For deleting 2 level WBSE first you need to remove the budget from CJ30 and the reset the status using OPSX t .code. Then remove the IM assignment from the 2 level WBSE and delete the WBSE and Project definition.
Thanks
S.Murali

Similar Messages

CAT2 duplicate PS network activities showing in personal template

Hello,
We are using SAP_APPL 4.7, support pack 22 and SAP_HR 4.7, support pack 10.
I don't know much about CATS & PS, but I provide our end user support.
We are using transaction CAT2 to report hours worked against PS network activities. We have run into a glitch when using the 'Save as Template' feature which creates a personal template. In our situation a person will add a network activity in the data entry area of CAT2. After they input their time they press the 'save as template' icon. Then when they enter CAT2 the following week to report their time, the network activity is still listed in the data entry area for them to enter their time. This part is working fine.
Now let's assume someone goes into project systems (CJ20N) and changes the network activity description (which shows in CAT2 as a informational output field). The person entering time then goes into CAT2. Their template is showing the network activity in the data entry area with the old description. When they input their hours and press enter, the new network activity description is pulled in on the time sheet, overlaying the old original description. At this point they still see one entry in their time sheet. Now here is the glitch - if the person goes in the following week to enter their time, they see two entries in the data entry area - one with the old description and one with the new description. Both records show the same network activity number, but now 2 records are appearing in their template because the description changed.
Our 'work around' has been to have people delete their personal template and recreate it from scratch if they see these 'double entries' due to a description change. Does anyone know a better way to handle this or if there is 'fix' that we can apply to correct this issue so we don't see two records? I did some looking in OSS, the only duplicate entry reference I could find was OSS note 1058293, however it was related to WBSs and was not for our release. Can anyone help? Thanks!

Hi Debbie.
When writing into CAT2 screen data is pulled when pressing enter. If a person has a wrong cost center, e.g., this cannot be changed by changing the persons cost center only. All the hours have to be deleted and rewritten for CAT2 then pulling the correct cost center.
Considering this behaviour of the system it would be a consequence that CAT2 pulls the new text but lets the existing entries unchanged.
You have not said anything about the written hours. Are these duplicated as well? If you open an OSS because of this I'd be curious to hear about the answer.
Best regards.
Jens

Automatic release of network activities

We are currently completing the configuration/implementation of the
Project System module.
We want SAP to automatically release the following network activities
upon final confirmation of an activity.
As an example, letu2019s say we have a simple network of 3 activities:
Activity 10 (Predecessor of activity 30, type of relationship
is FS with activity 30)
Activity 20 (Also predecessor of activity 30, type of
relationship is FS with activity 30)
Activity 30 (Successor of activities 10 and 20u2026therefore,
activities 10 and 20 are predecessors of activity 30)
Based on these relationships, before activity 30 may begin (or may be
released), both activities 10 and 20 must have been completed.
If a u201Cfinal confirmationu201D is set on activity 10, we want SAP to
automatically set the u201Creleaseu201D status on activity 30 if, and only if
activity 20 is also final confirmed.
We are trying to accomplish this using the milestone function
If we put a milestone on activity 10u2026
In the milestone, we:
Set the u201Cfunctionsu201D indicator
Select the function u201C Release following activitiesu201D
Enter the status CNF for confirmed in the u201CSyst.STS u201Cfield.
Set the u201CChange statusu201D indicator to +
Letu2019s say we now have the following statuses on the network activities:
Activity 10 = REL
Activity 20 = REL
Activity 30 = CRTD
Then, if we final confirm (status CNF) on activity 10, SAP triggers the
milestone function and release activity 30, even if activity 20 is not
confirmed yet!!!
After final confirmation of activity 10, the statuses on the network
activities are:
Activity 10 = CNF
Activity 20 = REL
Activity 30 = REL
Why is it releasing activity 30, even if activity 20 is not confirmed?
Activity 20 must be completed also before activity 30 may be
released!!??
Therefore, in this situation described, when the milestone on activity
10 was triggered by the final confirmation of activity 10, activity 30
should not have been released.
Activity 30 should be released only when activity 10 and 20 would have
the status CNF.
What am I missing?
How can I setup the milestone so it reacts properly, taking into
account the relationships between the activities?
I look forward to your inputs.
Thanks
Frederick

Hello Frederick,
unfortunately scenario described will not work. I. e. milestone function does not consider status of the other activity and will release the directly linked activity.
One may check whether required logic can be implmenented in customer exit CNEX0028 (not CNEX0029).
As an alternative one may try to implement the logic in a substitution exit to trigger status change via ABAP internal function calls. However this requires a deep understanding of ABAP and of PS code.
Kind regards
Peter
Edited by: Peter Kratz on Apr 22, 2009 2:46 PM

How do I delete a network and start over with no wired computers??

I've been trying forever to delete my parents network...it has a WEP I can't remember, and I just want to start from scratch. I've tried reseting the router...I've even called a Linksys tech, and even she was baffled. I have no wired computers...Can anyone help???

The only thing you can't do is upgrade the firmware.
That being said ... I have to assume you are using Windows XP and windows is managing the wireless network connections.
If any of these assumptions are false, my advice may not be as helpful.
Step 1. Delete all networks from the Preferred Networks list.
- open the wireless network connections window (double-click on icon in task bar)
- click on Advanced tab (bottom left)
- select each network that is shown and delete/remove it (can't remember what the button is called)
Step 2. Reset the router.
- unplugging the router does not accomplish anything here
- locate the reset button ... press AND hold for at least 5 seconds
- once you release the button, various lights on the front panel will flash as the router boots
- when you have a steady green for power, look to see if you have a green light for WLAN
- if the wireless is turned OFF by default (no green light for WLAN) you will have to find a way connect wired for at least a few minutes to turn it on (take it to a friends, bring the friend to it ... whatever works)
Step 3. Setup the router for secure wireless.
- if the WLAN is lit after resetting, you should see a notification on the computer saying "one or more wireless networks are in range"
- click on that notification and find an unsecured network called linksys (if there is more then one, pick the one with the highest signal strength)
- once you connect to that, open Internet Explorer and in the address bar type 192.168.1.1
- the user name is left blank and the password is admin
- change the password (under the Administration tab)
- under the Wireless tab change the SSID name
- under the Wireless Security tab choose WPA-shared key (better the WEP) and a phrase
- once you apply the changes you will lose your connection
- go back into the wireless network connections window and you should now see a secured network with the name you picked
- try to connect to it, a dialog will appear asking for encryption type (WPA-shared key) and phrase
- once you have successfully connected windows will automatically set up that network as default and connect to it whenever it is in range.
Let me know if any of this is ?!?
Dan

Can't delete a network I've created

Hi,
How do I delete a network that I've created using tool bar > airport > create new network. I've created three not knowing what I'm doing, surprise surprise, I want to keep the name of the third but want to delete the first two which are constantly visible in the airport menu list. They have been deleted from within system preferences > airport > prefered networks.
When I try sharing my internet connection i get a dialog box that states non of my networks are accessible and do I want to join the '(the name of second one)' I created. Where is it storing this information for me to delete.
Short of not getting a solution on this forum then I'll wipe the hard drive as a last resort rid my system of them.
Can anyone advise?
Thanks for any help you can offer.
slf

Do you have a backed up configuration file that doesn't have this change? If so you can try to revert to factory settings and then reload the file. If you don't have such a file back up your current Base Station settings to a file, revert to backup settings and then reacquire the Airport load up your configuration file, make the changes you want and then update the Base Station.
Let me modify this answer a bit? are you using your Mac as a base station or do you have a saucer? A more exact description of your setup would be helpful.

HT4262 I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate.

Remove authorization to delete Opportunities and Activities

Hi ,
The requirements are that the user can create and change Opportunities and Activities , but not Delete Opportunities and Activities .
I did generate a PFCG role from the Business role , but cannot find the correct object to deactivate/remove from the PFCG role
Thank you.

Hi ,
Thank you , but the "Trash Can" in the WebUI is still accessible , the user gets an error log , but is asking from the "Trash Can" to be grayed out . Can we do that ? I was looking at Authorization Object UIU_COMP , but could not find a related activity .
Regard's
Edited by: Christophe Schutz on Oct 5, 2010 10:05 PM

Hi I am having trouble with wifi my OSX version is 10.8.4 and I can't connect iv put the password in and it' keeps coming up with a exclamation mark in wifi symbol I can't get my computer to delete the network or forget it??

Hi I have a mac book pro OSX 10.8.4 iv connected to a wifi point where I am staying and iv selected network and put in password and over the wifi symbol a exclamation mark appears the wifi works perfectly on my iPhone but won't with my MacBook iv turned it off and on iv tried to forget/delete the network but it won't let me? Is there anything I can do I really need it cause I'm travelling and need to book things. Thanks

Information.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
Please help me!

If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

ECP with network activities and sales pricing

Hi experts,
Currently I have configured the system so that I can plan costs by assigning Easy Cost Planning templates to network activities and WBS elements. However, when I try to create quotation (sales pricing) from Project Builder (CJ20N), the planned costs of ECP templates assigned to network activities does not appear, only the planned costs of ECP directly assigned WBS element appears.
Thanks in advance.
Hieu Nguyen

After extensive testing, I believe doing sales pricing from Project Builder would not work correctly when using ECP with network activity. Sales pricing from Project Builder will only work properly if ECP only assigned to WBS element.
If you need to use ECP with network activities, you would need to use DP82 to do the sales pricing.
Regards,

Cost Planning on Network Activities

Hi,
Can any one help me to enter planned cost on network activities with out using capacity planning.
Thanks
Murtaza

Dear Murtaza,
Refer below sap help link for Cost planning in Network Activities.
http://help.sap.com/saphelp_46C/helpdata/EN/86/98853478616434e10000009b38f83b/frameset.htm
Click on above link follow the menu path
Cost Planning > Cost Planning in Networks > Network Planned Costs > Basis Values for Network Costings
Cost Planning > Cost Planning in Networks > Network Planned Costs > Unit Costing in Networks
Hope its useful.
Sandeep

How to use BAPI_PROJECT_MAINTAIN to create network activities under WBS elements ?

Hello ABAPers,
I have been using BAPI_PROJECT_MAINTAIN to create Project and WBS elements and I have done them without any errors.
Now I need help on how to create network activities.
Can anyone share on how to pass data to I_NETWORK table and I_ACTIVITY table and a brief description on what they are ?
Thanks in advance,
Kiran

Hi Kiran,
Do the following steps
1.pass the following to i_method_project
method_project-refnumber = lv_refnum.
method_project-objecttype = 'NETWORK-ACTIVITY'.
method_project-method = 'UPDATE'.
concatenate aufnr(network nr) vornr(activity) into method_project-objectkey.
2.Into i_activity
activity-network = aufnr.
activity-activity = vornr.
3.i_activity_update
activity_update-network = 'X'.
activity_update-activity = 'X'.
It should work.If not let me know.
Rgds,
K.S.

Files deleted over network

Hi, some of users over the network accidentally deleted a folder from XServe, and he asked if it can be recovered, when someone deletes a file/folder over network OSX reports that "the item will be deleted immediately", is this true? it wont going to be stored in some "Network Trash Folder"? or ".Trashes"? or "Temporary Items"??
And if it really wont be recovered, is there a way to prevent this in the future? like to tell OSX Server to put all the files/folders deleted over network to be stored in a special folder for a certain time to prevent loosing important files accidentally or by other users??
Thanks

Bertrand> This seems a nice idea, but its not exactly what i need, people still need to delete files from the server, but sometimes they delete important things and im looking for a way that the OSX Server keeps the remotely deleted file for a certain amount of time so it can be restored if needed. many times users accidentally delete files from the server and hit the "OK" button without noticing they just delete an important file from the server and not from there HD, for example, in Apple Share IP on OS9 if you delete a file over the network it would keep it in the user Trash and he empties it, and if he for example restarted his computer, the file on the ASIP would be stored in "Network Trash Folder".. why the mighty OSX Server doest have this great ability?!
Steve> Tapes is great for backup and archiving, but its not what i am really looking for, it has the same problem i have with Time Machine, time machine wont backup a file copied to the server and accidentally deleted within an hour, so Tapes, wont backup a file copied and deleted within a day..
WelshDog2> just a question: if i dont have any partition on my XRAID, how can i make it backup its self on its own HD's?! is this possible?! it wont solve my problem but its good to know if this can be done..
Thank you all guys for your replies, i really appreciate it..

Planning network activities

Hi all,
I have a question related to project planning.
I would like to plan the network activities per cost element and per period (year/month) as this is a customer requirement . However, in the end i would have a lot of cost elements per wbs elements which i think it would not be user friendly. How could i manage this in a easier way? Moreover, some of these activities have several delivery dates which i think it complicates the project planning (even in several years)
Moreover, as far as i know, it is not possible to copy the activities real values to a plan version. How can i manage this using the sap standard functions?
Any ideas?
Many thanks.

Hi,
Different WBS can have different Responsible Cost centres and Required cost centre. However we can define the network cost centre depending upon the type of activity we are doing. The settlement of the root WBS will clubbed all the cost from different activity -- > Different Network --> Different Levels WBS to the root WBS.
Hope this will help.
Regards,
Uddhab

Photoshop file gets deleted in network while using on IMAC

photoshop file gets deleted in network while using on IMAC. I have tried on different server also. How to reslove the issue. Please help me ?

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Deletion of network activities

Similar Messages

Maybe you are looking for