Delivered and confirmed quantity in COOISPI

Hi all
Iu2019m facing a Problem with confirm process ORDER, the process ORDER has been confirmed with quantity 800 PCS but when display process ORDER on T-Code: COOISPI the cnf qty is shown 0 PCS. Why does this happen?
Thanks
Edited by: obie villamosa on Feb 8, 2012 3:11 PM

Dear obie villamosa,
Do one thing Recreate another order & release it properly.After that go to co11n t-code confirm there step by step if progressive confirmation is active or do final confirmation if milestone is active.then once go to display order & click on blue eye button & check status.
After that go to cooispi on there select list as OBJECT OVER VIEW according to your order.
Check & confirm?
Thanks
Alok Mohapatra

Similar Messages

Committed and confirmed quantity in shedule line

Hi,
I have an order in which material was not confirmed on a day when that material was present.
I noticed that the commited quantity was 1 but confirmed qtty was 0 on the shedule line of that day. Later the order confirmed on a later date with both confimed qtty & committed qtty as 1.
Questions
1)Why did the material did not confirm on that day?
2)What is the difference between confirmed and committed qtty?
Regards,

This is Standard SAP.
1)Why did the material did not confirm on that day?
Material was not confirmed for possible reason being:
a. Material not in Stock
b. Material in Stock, but based on number of Lead Days, it is confirming future date.
2)What is the difference between confirmed and committed qtty?
Confirmed Quantity is confirmed on to be available for delivery on a particular Date and particular Quantity.
Commited Quantity is the Commited Quantity in sales Order.
Regards,
Rajesh Banka

How to link Invoice Quantity and Confirmed quantity in schedule line

Hello,
I'm working for a report in BW. The user want to compare the invoice quantity to the confirmed quantity in schedule line for a sales order.
I can't find any table linking these two fields.
Could you help?
Thanks a lot
Jeannie

Ashish,
When we link these two tables by Sales Order Number / Item, we would take following result:
Sales Order    /     Itme     /     Schedule line     /    confirmed quantity   /     actual billed quantity
1                  /      10        /      1                     /    3                            /              5
1                /         10      /       2                    /     2                            /             5
But in fact, for Sales order/itm 1/10, we have only 5 PC billed, not 10.
When billed 5 PC, I want to despatch it to the Schedule line as 3, 2.
Regards,
Jeannie

The confirmed quantity not posting in COOISPI

Hi Gurus,
Currently, there is an issue in COOISPI wherein the process order has been confirmed and delivered however, confirmed quantity in the report is 0 but the delivered quantity is correct. The finished goods are auto-GR. The transaction code used is COR6.
Need help on this!
Thanks,
Mae

Hi Tao,
The control keys are:
The control keys used in the recipe are PI01, PI03 and NATP
Thanks,
Mae

Service Confirmation Confirmed Quantity

Hi,
I am using CRM 5.0 and have configured my own Service Order and Service Confirmation. I am able to create a Service Order for my product and create a follow-on Service Confirmation which I have completed.
My question is how to I change the "Confirmed Qty", in the schedule line of the item it shows quantity 1 and confirmed quantity 0. I am not distributing this Service Confirmation to ECC since this is standalone process, but I cant find how to confirm the quantity within CRM.
Thanks,
Sam

Hi Imthiyaz,
I have checked and it does not work that way too . I am looking for some literature where SAP says it is not possible.
Thanks and regards
Iftekhar Alam

Diff of delivered qty and confirmed yield in production order

hai gurus
Plz explain me the difference between the Delivered qty and confirmed yield qty in production order.
iam getting for some order delivery qty less than the confirmed yield and also greater than the cnf yield
pl reply me
thanks
regards
vinoth

Hi Vinoth,
Confirmed quantity means the qty which you confirm in Tcode : CO11 / CO11N against a production Order.
Delivered Quantity is the Goods Received qty agains the order. Goods Receipts can be done using of the two methods :
1. Using Tcode : MB31 against a production order
2. Auto goods receipts by using the Relevant Control Key in the Routing Last operation. i.e While the last operation is confirmed the system does the GR in teh background.
- If you are using the first option mentioned above then they is no relation between Confirmation qty and GR qty unless you use a exit to check the confirmed qty while making GR in Tcode : MB31 OR MIGO.
- If you are using the second option i.e Auto GR control Key then the confirmed qty must be equal to GR (delivered qty) provided there are no goods movemement errors while confirmation saving. If there are any movement failures during confirmation, you can check the same in Tcode : COGI.
In your case you can check the COGI and clear the error , then both the Confirmation and Delivered qtys will match.
reagrds
radhak mk

Material Confirmed quantity and Open quantity

Hi All,
I am working on a report where the user wants the material confirmed quantity and open quantity at the batch level. I know for open quantity VBBE-OMENG can work. Just need confirmation that this is the correct field. However for confirmed quantity I am not able to narrow it down to one field. I have the following fields as possibilities but not sure which is the right one.
1) VBBE-VMENG
2) VBEP-BMENG (This is the at the sales order level though. We need it at the batch level)
Can you please let me know if i have the right approach here? The report has Material, plant, sloc and batch along with a bunch of other fields.
Regards.
Sid

Hello,
you should extract the quantities from all the deliveries selected for material and batch, and selecting only open deliveries.
Use a selection like this:
    SELECT lips~MATNR lips~WERKS
           lips~CHARG lips~LFIMG
      INTO TABLE lt_lips
      from lips as lips
      INNER JOIN vbup as vbup
        on lips~VBELN = vbup~VBELN AND
           lips~POSNR = vbup~POSNR
     WHERE lips~MATNR = p_matnr
       AND lips~WERKS = P_WERKS
       AND lips~CHARG = P_CHARG
       AND ( vbup~WBSTA eq 'A' or
             vbup~WBSTA eq 'B' ).
Best regards,
Andrea

Confirmed quantity in sales order and credit check

Due to the fact that we are using automatic credit check , for the sales orders that are not blocked due to credit control the confirmed quantity is made to 0 until some person responsible unblocks the sales order.
My issue is how to prevent the confirmed quantity from becaming 0 even if credit block exists

Dear Friend
If the automatic credit management is active the confirmed quantities of sales order becomes 0 because in t code OVB8 the requirement no used will be 101 and system routine will be 1 that is system reservation
Here you need to change the 101 to something else or you have to write a new routine thro ABAPer so that even if the document goes for credit block the confirmed quantities doesnot change or become 0
I dont have the practical experience of changing this to something else and having worked on that
But you may try that
The area to explore or get your requirement is this only
Regards
Raja

HT3728 my broadband speed has all of a sudden been reduced dramatically over the weekend. the isp asked me to eliminate my apple airport express base station to make sure that my 20mb band is being delivered which i did and confirmed so.

MY BROADBAND HAS BEEN REDUCED DRAMATICALLY IN MY HOME NETWORK USING MY AIRPORT EXTREME BASE STATION.
THIS HAPPENED SO UNEXPECTEDLY OVER THE WEEKEND. I CALL MY ISP AND THEY SIMPLY TOLD ME TO ELIMINATE THE AIRPORT
EXTREME BASE STATION TO CONFIRM THAT WHAT I HAVE PURCHASED IS BEING DELIVERED WHICH I DID AND CONFIRMED.
MEANWHILE USING MY NETWORK UNTIL LAST FRIDAY EVERYTHING LOOKED JUST GREAT.
I WONDER WHETHER I WOULD HAVE TO RESET MY AIRPORT EXTREME TO FACTORY SETTINGS TO RECONFIGURE IT.

Hmm. Your ISP is incorrect in telling you that removing any of your routers on the local area network will have anything to do with the bandwidth performance that they provide you at the Internet modem. On the other hand, changing/removing networking equipment on your local network DOES affect bandwidth performance on that local network.
Most likely what the ISP is asking you to do is verify that you are getting their promised download/upload bandwidth at the modem. It appears that you did that and verified that you are getting the stated bandwidth.
So, we should take a look at why, when adding the AirPort Extreme, you are getting less.
First off, which AirPort Extreme model do you have? What is the make & model of the broadband modem that your ISP is providing you?
It is always a good idea to perform a complete power recycle of your networking equipment when introducing new hardware. Please check out the following AirPort User Tip for details.
(p.s. Please don't use all capital letters when you post. It appears to readers that you are shouting. Thx!)

Confirmed Quantity and Goods Receipt

Hi,
Currently SAP does not restrict for Goods Receipt in MIGO even if I have not confirmed single quantity of Production Order. But I want to restrict the user to MIGO only Less than or equal to confirmed quantity on last operation. Is there any way to do this? Kindly reply.
Regards,
Hammad

Hi,
You don't want underdeliveryof the production order qty when You do the goods receipt.
For that no need to give tolerance. System will not allow to do GR for less quantity.
Put % under delivery tolerance in work shceduling view as per ypur requirement . the under delivery tolerance ticked in Workscheduling view of Material Master & also in Production order CO02, GR Tab page.
Go to the TC : OPK4 select the value for the field as
Under Delivery: " Delivery tolerance is checked"
Pls try and come back.
Regards,
R.brahmankar

Logic for fetching Quantity Delivered and Invoiced

I am creating a Sales Order report in which I need to Fetch the delivered Quantity and Invoiced Quantity fields.
I am currently going to VBFA table and pass SO and line item number and fetch all data. Then I perform addition/ subtraction to remove cancelled quantities. this is making the logic complicated.
Is there any standard Function module/ or table or BAPI which can fetch the Delivered and Invoiced quantities directly?
Regards,
Onkar Borkar

Hi Experts,
There is a requirement where in it is required to track changes in the field 'Batch' in the deliveries. This change log report should have the option of checking the log for multiple deliveires at a time. It can be similar to the delivery change log report that we have but shoul run for multiple deliveries at a time.
Please let me know if such a reporet is available in standard SAP or in LIS repporting.
Thanks/ Regards,
Onkar

Sales order quantity decrease after delivered and PGIed.

Hi All,
I need all of your's help for the below mentioned requirement ---
--- Customer care can decrease a sales order line after it has already been delivered and PGIed. Customer care receives a warning massage, but can ingore this warning and proceed with the change. The requirement is to make this warning massage as a hard error massage so that it cant be changed.
Please guide me whether there is any settings by which I can make this as error massage so that it cant be changed by the customer care after Delivery and PGI is done.
Kindly guide me with the complete details ASAP.
Thanks,
Som.

Hi Seshu,
Thanks for your kind help, and please help whether there are any other way to do this warning massage as hard core error massage.
And as you said i was trying with that - after entering into SHD0 and putting VA02 its asking for the Variant, so can you please guide me with the required variant name.
Please let me know.
Thanks again,
Som.
Edited by: som1983 on Jul 28, 2011 2:04 PM
Edited by: som1983 on Jul 28, 2011 2:05 PM
Edited by: som1983 on Jul 28, 2011 2:05 PM

How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

Dear SD Experts,
Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
Thanks!

hi
in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
regards,
Sudhir

Schedule lines - Confirmed quantity issue

Hi
I have a make to order material which is purchased from a vendor. A purchase requistion is automatically created every time it is quoted in a sales order.
In a particular case, I had 1 such material which was not in inventory and which could be used while delivering a particular sales order. I posted goods reciept using movement type 501 - E and received it as a part of sales order stock.
Now when I go to the schedule lines screen in the sales order, it shows confirmed quantity as '0' (See screen shot below) and therefore I am not able to deliver this sales order.
[http://i41.tinypic.com/wwgjt4.jpg]
Availability check is configured as in the following screen shot
[http://i44.tinypic.com/290swwg.jpg]
How can I get a confirmed quantity of 1 in the schedule line. Why is not SAP recognizing 1 in sales order stock?
Please help me with this issue.
Regards,
Ketan

Ketan,
The config is acceptable.
SAP generally does not let you enter confirmation quantities manually.
This issue is that you have said you have RELEVANT (sales order relevant) stock on hand, and you cannot get a confirmation.
Now you are saying when you do the ATP check, it does 'nothing'. I am going to assume that you have already checked that the item of the sales order is not rejected.
Normally, during an ATP check, you should have gotten a proposal screen, which will show that 0 or more pieces are available for confirmation. If only zero is available, the system only will give you an icon on this proposal screen which says 'Continue'. You still should get this screen! Since you haven't gotten this screen, There is probably one of three things wrong. Either you have something missing in ATP config, or you have an authorization issue, or you have a userexit that is interfering with the ATP check.
SD ATP settings and config is not simple, and neither is debugging a userexit. This is not an MM issue, this is SD. Consult with your SD team to determine your next step. Or, if you have no SD resource, you should probably repost this message on an SD forum.
Regards,
DB49

Delivery quantity greater than confirmed quantity in sales order

Hi experts,
Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
Anyway in system to check only "confirmed quantity" can be delivered?.
Regards,
Liang

Thanks Ankur for your reply.
The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
Best Regards,
Liang

Delivered and confirmed quantity in COOISPI

Similar Messages

Maybe you are looking for