Delivery not before date and Delivery not after date

Hi Everyone,
Can anyone help me in this issue, we need to map "delivery not before date" and "delivery not after date" from an EDI 850 into a sales order.
Are there any fields to which we can map the data? if not would anyone suggest how to go about it?
Thanks,
Michelle.

Michelle,
We have a similar requirement, albeit we call it a Delivery Window. We have implemented this by mapping two E1EDK03 qualifiers (we use 033 & 034) to two Z fields extended to VBAK, which we then include in our Sales Order Delivery Date logic.
Not very elegant, but then my understanding is that SAP has no concept of the Delivery Window.
Cheers, Paul.

Similar Messages

  • Impact of Fixed date and Delivery

    Dear All,
    I can see a check box "Fixed date and Delivery" in Scheduline category" tab in the Item level of the Sales Order.
    I am not sure about the impact of this check box.
    I thought, if this check box is checked, system will allow to create delivery on this particular date only. But system allowed me to create deliveries after this date also.
    Then what is the exact use of this check box.
    Could anyone explain.
    Regards,
    Mullairaja

    Hi Raja,
    this check box is used,
    suppose you have created the sales order and then schedule line has appeared in SL tab page that means it has proposed the date of delivery date and to fix the MRP from schedule line date.
    that means if you are indirectly stating to the system that, these lines go on that date only and dont change the date of SL if RE-ATP check happens.
    balajia

  • How to List Sales Orders based on Creation Date and Delivery Priority

    Dear all,
    How can we list Sales Orders based on creation date and delivery priority.
    I tried using vl10a transaction code, but there we can see sales order based on delivery date.
    we need to list all sales order based on delivery priority and sales order creation date.
    can any one of you tell me which standard report gives such kind of report. Your suggestions will be highly appreciated.
    Thank you
    Raghu Ram

    Hi Raghu,
    There is no st report available as per your req.
    Using SQVI, you develope one report that is list of sales orders based on your req.
    SQVI is used to convert a Quick View into a query.
    Quick Viewer:
    The Quick Viewer allows you to define reports without having to program yourself. The Quick
    Viewer is especially useful for new users and occasional use.
    Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
    Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
    The following is a comparison of Quick Views and queries:
    Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
    In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
    Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
    The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
    To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
    Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
    Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
    Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
    Choose Create.
    Enter a title for the Quick View and remarks, if you think they are relevant.
    If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
    Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
    SQVI Table Quick viewer – Used to created quick client dependent reports
    Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
    Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
    You can play around with it and see if it meets your needs...
    The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
    You can get the report by joining the tables VBAK and VBAP.
    If you have any queries, i will forward screen shots to your id.
    Reward points pls.
    Regards,
    Govind.

  • Req. delivery date and Delivery date should be same in a sales order

    Hi experts,
    We need a customization for getting Requested delivery date, Material Availability date and Delivery date should be same.
    Example if I keep request delivery date as 12/12/2012, system should consider same dates for MAD and Delivery and confirm the requested quantity.
    How to achieve this customization..
    Thanks,
    Bala.

    system should consider same dates for MAD and Delivery and confirm the requested quantity
    What you are going to achieve by this?  Hope you know the concept of MAD and confirmed quantity fields.  Let us assume, if stock is not there for a material for which sale order is created, can you let me know, you want the system still to confirm the quantity? You can post the goods issue only if system confirms the quantity in schedule line which is possible, only if stock is made available.  If client asks something which is not possible in SAP, think in a logical way how SAP works and convince them accordingly. 
    G. Lakshmipathi

  • Req. delivery date and plan order finish date relationship

    Dear Experts,
    I have a question on setting the req. delivery date and plan order finish date relationship. Now, I want the plan order finish date is one day before the req. delivery date, is it possible to set it in configuration? Please advised! Many thanks!
    Regards,
    Matt Yim

    Matt,
    Please use a schedule margin key(SMK) in the material master MPR2 view which has float after production defined as 1day.
    If there are no SMK with that defination then you can define you own in customisation and assign the same in the material master. (SPRO--->Production ->MRP->Planning ->Scheduling and Capacity Parameters->Define Floats).
    Regards,
    Prasobh

  • When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings?

    When trying to download apps to my ipad, I get a message saying a secure connection could not be established and to check my date and time settings.  Can someone tell me what this means and how to fix the problem?

    It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.

  • Vendor Evaluation Delivery Subcriteria Shipping Instr and Adher to Conf Date

    Hi experts,
    I have Vendor Evaluation configured for Delivery subcriteria Shipping Instr and Adher to Conf Date.  These are set to scoring method 6 and B respectively.  In the Purchasing Org Data, for subcriteria Delivery, I have equal weighting set for all 4 subcriteria (on-time del, quantity reliability, shipping instr, and adher to conf date).  When I run the vendor evaluation in ME61, and look at the evaluation of subcriteria, I see a score and weight for on-time delivery, and quantity reliablity.  But for shipping instructions and adher to Conf Date, there is no score and the weight is 0.0.  Does anyone know why there is no weight shown?  I know I have to maintain the scores for shipping instr and adher to conf date but I should see weight as 25% since I set these 4 subcriteria to equal weighting.  Can anyone help?  Thanks!
    Regards,
    Julie

    Hi,
    As an example its not available, nor tried self. As a common rule - if a main criteria created and sub criteria exists, when you run evaluation for main - excluding a stage of sub is not possible.
    Secondly try transaction code: ME6C
    Help says: Set this indicator if you only want to display those vendors that do not have
    an evaluation for certain main criteria. When you click on Execute, a screen allowing you to choose one or more main criteria appears. The missing evaluations for these criteria are then listed.
    here you can selection option to include/exclude evaluation.

  • BAPI for changing delivery date and delivery time fields in LIKP table

    Hi All,
         Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
    Please tell me experts if exists.
    Thank you,
    Raghu.

    try these:
    BAPI/FM to update LIKP and VTTK tables
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800

  • HT4847 How can I change my iCloud email address without losing all my data and what not???? Please help...

    How can I change my iCloud email address without losing all my data and what not???? Please help...

    Welcome to the Apple Community.
    You can't change it but you can create an alias to use.

  • What is the difference between delivery date and actual goods issue date?

    Hi ,
    Can you please tell me the difference between Delivery date and Actual goods issue date ?
    Delivery data can be be greater than goods issue date?
    Thanks,
    Ajay

    Hi Ajay,
                  Delivery date means its the original date on which the delivery should be done.Actual goods Issue date is the date on which goods to be delivered according to the purchase order.There can be delay in the delivery so we maintain 2 objects.
    Yes delivery date can be greater than Goods Issue date.
    Hope this clears
    Regards
    Karthik

  • Fieldes planned delivery date and actual good recipt date for SAP QUERY

    Hi Gurus
    I am changing sap query. I need to find two fieldes  : planned delivery date and actual goods recipt date
    I dont know MM tables, do you know wrhere are?
    in table EKPO i don't find the fieldes.
    Thanks in advance

    Thank a lot!
    Regards

  • The filter expression is on external data and could not be validated.

    The filter expression is on external data and could not be validated. It may not be supported in Web browser forms.
    I am reciveing this error in my infopath 2010 browser form when I am trying to filter a drop down list from sharepoint.
    I thought filters were available on infopath 2010 browser forms or are they only available from values inside the form?
    I did have a look around the forums but only could find this error occuring during beta stage.
    Thanks

    Ok, so you shouldn't be filtering in the form, because that means it downloads the entire list first and then filters out the items.  That's client-side filtering.  What you want to do is server-side filtering by doing a parameterized query.
    Set the data connection NOT to automatically download
    Add Form Load rules that do the following:
    First, "Set a Field's Value" and set the position query node of the data connection to the value of "manager" (whatever the exact syntax is)
    Then query the data connection
    Doind this should make it ONLY download items where position=manager instead of downloading all items and filtering.  This is a much better practice and was not even available in 2007, so you should make full use of it in 2010.  Even so, what you
    were doing should have worked anyway, so I'm not sure what's going on there.
    When you do the filtered dropdown, your Source field should be the repeating group of the data connection, not the property itself.  The property should only be selected in Value and DisplayName.  The group should be in the Source field, and THAT'S
    where you apply the filter.
    SharePoint Architect || Microsoft MVP ||
    My Blog
    Planet Technologies ||
    SharePoint Task Force

  • I just installed Photoshop elements 11. Install fine. When I clicked to open Organizer, I received a messaging indicating that it was out of date and coudl not be upgraded. How can I address/fix this?

    I just installed Photoshop elements 11. Install of the application was fine. When I clicked to open Organizer, I received a messaging indicating that it was out of date and coudl not be upgraded. How can I address/fix this?

    Thank you for the replies. I'm afraid neither one helped.
    kglad, I never get to any error code so your link can't help.
    Jeff, I looked at your link and
    a) again, I never make it to an error code
    b) I'm definitely connected to the internet
    c) I can access secure sites; I tried connecting with the firewall disabled and the same thing happened, so I don't believe it's a firewall issue.
    d) I don't understand the checking host sites - this is far too complicated for a novice user. It should not be this difficult to get a software running. I don't want to mess with these kinds of settings.
    e) I followed the steps for the global sign in root CA and my screen looks the same as the picture here.
    I can't activate the software offline as there is no option to generate a response code when I click on having trouble connecting to the internet. All I get is a prompt to change my password.
    If the problem were simply connectivity from my computer, then why does the box completely freeze? Can't cancel, can't click on the little X to close it, can't right click on the box to close it. I have to reboot every single time. I know others have had the same problem and I haven't found any answers that I could apply.
    I don't understand for the life of me why Adobe does not have TELEPHONE customer support. I have spent 2 days on this, this is crazy.

  • I am trying to download adobe standard but it keeps saying reliable source serving corrupt data and will not download

    i am trying to download adobe standard but it keeps saying reliable source serving corrupt data and will not download

    Hi John,
    Please try downloading from this direct Link (Download Acrobat products | Standard, Pro | XI, X ) and let me know if you still face the same error message:
    Regards,
    Rahul

  • Store Replenishment STO created date and delivery date

    Hi
    The Store replenishment STO generated out of WRP1 ; 
    The  STO document date and delivery date is defaulted to 3 days later.
    ie. WRP1 was run on 31st May.  But the delivery date and the STO doc. date is 3rd June.
    Is there any way to influence this?  We want it to be defaulted to the next date;  Replenishment is to be run for th next date.
    ie. June 1st.
    Regards

    Hi Carlos
    The master data of the article field MARC-PLIFZ- is maintianed as 0 days.
    Basically the replenishment is done in the same day.  (DC in the same city as the store)
    However still the delivery date in the STO is by default 3 days later.
    In the WRP1 screen - the  planning date is today date.
    Regards

Maybe you are looking for