DElivery through Project

hi all
at the time creating delivery through project tcode : CNS0, i am getting following error please help to resove this 
Document is incomplete: You cannot save the delivery
Message no. VU013
Diagnosis
When the system checked whether saving delivery was permitted, it determined that the requirements stored in Define Incompletion Procedures for this document do not allow this subsequent function.
System Response
The system does not permit this subsequent function.
Procedure
If this message appears during online processing, you can edit the document by choosing Edit -> Log of incomplete items.
If the message appeared during background processing, you can analyze the problem by regenerating the delivery

closing thread

Similar Messages

  • High Sea Sales mapping in delivery from projects

    Hi,
    I have got a typical scenario where in delivery is supposed to be thru PS.
    Quotation consists of only the predefined Costing heads (non-deliverable & in line items) against which unit cost estimate is made using BPOs. After receipt of order the quotation is copied to create Sales Order  and WBS elements are assigned at line item.
    Deliverable materials are assigned at each WBS level in the designated Project and wrt the Sales Order, deliveries are created and billed. Pricing of the delivered materials is carried out in the billing doc.
    There is a scenario in which imported materials originally planned to be sold from stock and whose delivery was to be created from projects is now converted to HSS.
    Request to advise how to map this business process.
    Regards,
    Rajesh Mohapatra

    Hi Rakesh,
    1. When we do delivery thru CNS0 it Dr- FG Consumption /ac and Cr-FG Stock a/c. Suppose if i have to take this Dr-COGS-Fg and Cr-Fg Stock a/c. will you please suggest the necessary customization steps and user transactions.
    2. In our scenario we have done delivery through CNS0. When we do billing, we are getting an error that Profitability segment is not derived for GL (revenue). I have checked the relevant derivation rules which looks correct. Do u have any idea how to maintain derivation rule to derive WBS element?
    3. In other scenario, intstead of opting PS. We have followed: 1. Cretaed SO (with WBS). 2. MD04- Cretaed Planned Order 3. Converted Planned order to Process Order 4.Goods Issue and confirmation of process order  5.VL01N-Delivery (601 E).
    While doing delivery we r getting an error that create GL (FG-COGS) as Cost element. This is GL is mapped to GBB-VAX.we have for GBB-VAY with cost elemnt. Do we have to create this GL also as cost element? why system is not picking from GBB-VAY? any idea
    Regards,
    Babu

  • Delivery from Projects

    PS Gurus,
    One question regarding delivery from projects.
    I add Header component T-20000 in activity and explode the BOM in project.
    As a result of this, all the components pertaining to T-20000 comes up in project.This BOM explosion changes the item category of T-20000 to T.
    The question is how do I produce this T-20000 through Production order? I cannot run MRP for this material as it is not relevant to MRP in MRP settings (set to ND). I will change it to PD. But why the its item category changes to T?
    After its production, how do I deliver from PS since its just a text item.
    Please reply urgently.
    regards
    Sunny

    Sunny,
    I´m afraid this is a standard behavior. Once you explode the BOM in CN22, the header material will remain in the project just as Text item.
    As a workarround, you can consider adding material T-20000 again as an individual material (not exploding the BOM) or including material T-20000 in its own BOM as if it were a component.
    Another option is to try CN33, Bill of Material transfer. As far as I know, the header material will not be added as text item if you transfer the BOM.
    Hope this helps
    Regards

  • Delivery from project appearing in billing due list

    Hi,
    We have a scenario in which delivery is done through project (Tcode CNS0) and the billing is done through sales order (order related billing)
    The delivery type LP used for the delivery is not assigned to billing type since we are not supposed to do billing with respect to delivery document.
    But these delivery documents are appearing in billing due list (VF04) and remain there in the due list
    We want delivery documents (from project) NOT to appear in the billing due list.
    Please help.

    Hi Shambhu,
    Lets assume ZLP is not relevant for billing and if delivery is done then how can excise invoice ibe generated.
    Issue is delivery doc type LP is assigned to billing type which is meant for excise invoice and not assigned to billing type of final invoice.
    Now in India, why LP is assigned to excise invoice billing type, because for every delivery excise invoice is created.
    But for the same delivery type LP in europe, excise is not created and hence these documents remain there in billing due list.
    The issue can only be resolved if europe starts using another delivery type like ZLP which is not assigned to any billing type, but again that seems to be very difficult to implement at this moment of time.
    Thanks Shambhu.

  • Delivery through CNS0 is not happen for differ -2 plant

    Hi,
    i m doing Project FG delivery through CNS0 for 2 diff -2 plant (Plant = Shipping Point, i.e. A & B) to same customer (i.e. xyz)
    while i m using ship point A for customer xyz and doing del. through CNS0, system is picking all inormation which i had maintained in cj20n > extra menu > Del. information on activity level.
    but while i m using ship point B for same customer xyz and doing del. through CNS0, system showing an error that , " NO DATA WAS SELECTED WITH THE SELECTION CRITERIA ENTERED."
    Pls suggest me that wt i have to do now for Shipping point B.
    Regards.....

    Check your I Cat config, use VOV7,
    - Special Stock: Q - Project stock
    - Business Item.
    - Sched.Line Allowed.
    And accordingly maintain sch line cat determination for the I Cat.
    Try doing this,
    1. Create a project with WBS,network and activity
    2. Assign Header Item of BOM to activity manually - Use Reservation for WBS parameter when adding material & with 'L' Type item. Quantity should be Positive
    3. Release project and Run MD51 for project - Planned order is created
    4. PP person converts planned order to production order. When production order is confirmed & completed, it comes to project stock through PP with account assignment 'Q'
    5. The material is seen in MBBS, then you can do CNS0 and VL02N as described earlier for delivery.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Delivery from projects not included in dynamic availability check

    Problem:
    In our client, we use deliveries for project (delivery type LP, delivery item type DLP) triggered from network reservations.
    During delivery creation, we are finding that the existing deliveries are not being considered/cumulated into the ATP calculation. For example, for a given a material with an on hand balance of 22 units, individual deliveries for 4 units are created every day. The individual delivery passes the availability check test as it is always backed by the 22 units of stock.  However, as a whole now the individual deliveries are totaling 80 units, exceeding the quantity on hand.
    Is there any way to fine tune the availability check through customizing such that these  deliveries for project created are included in CO09 and the delivery for project creation?
    Or this should be an enhancement?. Client is in SAP R/3 version 4.7
    Thanks,
    Marco

    Query posted in the PP Forum and hence this is closed.

  • Account Determination Error when doing GI for Delivery from Projects

    Hi,
    When we try and Goods Issue a delivery from Projects, we get the following error:
    Account determination for entry 0 GBB 0001 ___ 7900 not possible
    We are not sure why the Account grouping code comes through with no value. Please could someone assist with this issue.
    Regards,
    De Wet

    Hi,
    Check in T code OBYC,whether the account determination is maintained against the valuation class for BPX.
    Regards

  • Delivery through ps

    hi friends,
                       my friend is repairing machines. first from enquiry, he will create the rough cut estimation. then based on that quotation will be created.then sales order will be created. then their team open the machine.and will create the required materials.then procurement will happen. once procurement is completed, then assembly will be done.then partial delivery will takes place.so my question is how the partial delivery can be possible and please convey., how the flow in ps.? full points will be awarded...

    Hello,
             You can make delivery of material through project of PS module. Very important is that
    you need to procure the material assigned in project and create a stock of that material and create the reservation for that material ( Reservation qty will be equal to your total qty to be delivered ) Once project stock is built you can go for delivery.
             Prior to that you need to create Sales Order and acct assignment as WBS element. You will bill the customer with reference to Sales Order only. Later you can go  T Code is CNS0 ( Delivery) Once you enter SO no or WBS element no. system will fetch all the mtrls pertaining to wbs element and show the list with qty equal to reseration qty. Here you can pick the qty which you want to deliver. So this is how you can get the delivery of that material. With ref to delivery you can have PGI ( Post Goods Issue )
    Hope it clears your problem.
    Regards,
    Ashish Kulkarni

  • PS: WBS is not flowing for a Material, while creating delivery from Project

    Hi,
    While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
    Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
    YMRG in COPA.
    Pls let me know, what can be the reason ?
    Thanks.
    Amit.

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Unable to create single delivery through scheduling agreement - MM37

    Dear All,
    In our scenario, we are creating scheduling agreement with tcode - ME37 for multiple material and for each material we create multiple delivery creation date schedule with past date (ME38).
    Then we create delivery with VL10D, we put scheduling agreement number in purchase order tab - purchase order field & Execute.
    It creates multiple deliveries but we want to have single delivery.
    We implemented SAP note - 377501 , but is is still not working.
    Kindly advice,
    Regards,
    Bhushan.

    Dear Lakshmipathi,
    Thanks for your reply.
    Yes, I searched the forum & got list of reasons for delivery split but wasn't able to identify exact reason.
    But first I want to confirm,
    1. Whether is it correct process to create delivery through VL10D for scheduling agreement (ME37) ?
    2. Also to overcome delivery split, we implemented SAP note - 377501 but did not worked.
    Therefore I am thinking to implement SAP Note -  386340, Kindly advice.
    Regards,
    Bhushan.

  • Delivery from Project with reference to sales order

    Dear All,
    I am facing problem in delivery. In my case scenario is-
    1. There are 10 materials with 20 quantities.
    2. I create a sales order only for two material with 5 quantities and enter wbs element number.
    Now when i use CNS0, enter sales order number and wbs elelment number system shows all 10 materials that I dont want means I want the materials that are included in sales order. Please help me how to control this.

    Please read SAP Help for a better under standing...
    I mentioned below a line from SAP help for your info.
    ...... it selects material components, the system takes components into account that have been assigned to either a network or ...... ...
    Please follow the below path to access the help..
    SAP Help Portal >>> Logistics >>>> Project System >>> Material >>>> Delivery from Projects......

  • Automatic Asset creation through Project settlement

    Dear All,
    We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
    Can any body help me about the Process of Auto Asset creation through Project settlement.
    I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
    Thanks
    Abhijeet
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM

    Hi,
    There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
    Regards
    Sreekanth

  • Creation of maintenance order directly through project.

    Hi,
    Is it possible to create maintenance order directly through project while creating network activity?
    Please let me know if it is possible and how.
    Thanks,
    Nilesh

    Hi Abdul,
    Thanks for your reply.
    Can you please elaborate few details on DIPM.
    Thanks,
    Nilesh.

  • Vendor Return Delivery through Quality Notification.

    Hi Experts,
    I m doing vendor return delivery through quality notification with action box , after giving PO NO. & Material document no we are getting the  following error
    1) Could not create return delivery
    2) Deficit of PU IR quantity 2.000 EA
    For the GR based IV reversal after IR tick is not active.
    Kindly suggest possible reason for the same
    Thanks & Regards
    Rajesh

    Hi
    There is deficit of Quantity i.e the quantity lying in stock is less than 2. and secondly for GR based invoice verification the IR tick should be there in PO in Invoice tab.

  • Stock transfer purchase requisition through project builder

    Hi Friend's,
    For transfering material from one plant to another plant we have to create stock transfer purchase requisition through project builder.
    Can is it possible to create stock transfer purchase requisition through project builder which will have account assignment category as Q & item category U.
    Thanks & Regards,
    Sandeep

    Hi Sam,
    Thanx for your input.
    We are dealing with project specific stocks & customer project scenario.
    My requirement is that we having 2 plants. Projects are created in 1001 plant, same plant does the mfg. of FG items required for projects & 1002 plant manufactures MTS items which are required to mfg. project FG items as well as same items will bring into 1001 plant and then delivered to customer.
    Here my clients want to create stock transfer pr through project builder to bring MTS items from 1002 plant to 1001 plant & then delivered to customer.
    I think as you said this is not possible in std. sap to create stock transfer pr through project builder.
    Thanx & Regards,
    Sandeep
    Edited by: Sandeep Theurkar on Mar 23, 2011 7:11 PM

Maybe you are looking for