Delta Wont Boot No Matter What

Ok heres the problem i set my ram timmings to aggresive when i rebooted it wouldnt post (blank Screen)
I tried Everything under the sun i tried the safe mode jumper the 100mhz jumper the clear cmos jumper
ive even took the battery out for an hour and cleared the cmos to see if that would help still nothing
ive tried different ram
ive tried different cpu
ive took the ram out clear cmos then put it back still nothing
same with graphix card and the cpu
all my  is almost brand new everything was working fine till i with the ram timings
this happened to my abit nfs-7 and all i had to do was clear cmos
i now theres some of u having the same problem
http://www.msi.com.tw/program/service/forum/index.php?threadid=28491&boardid=14&styleid=1&sid=c26823b30c0d5e71557f118792cad911
is the problem
Delta  7.4 bios
amd 2500
cosair 3200 ddr 2 3 2 6 @ 400mhz

Quote
Originally posted by SW-Smokeweed
if u read above i cant get into bios to change them drrr
any way i took to a tech friend of mine and he said he didnt even know what the prob was, so i had to rma it any way i believe it was caused from powering on when the clear cmos jumper was on would that have cause it u think?
so i payed the guy to send it off for me and do all the paper work.
so if any one else has this problem just straight rma the sucker i wasted like 50 bucks paying the tech to diagnose which ive already done, trying to get it to work with out sending it im to impatient, but when your computer makes u money i guess i need to be
but thx to all that helped
You have to love it when someone comes here looking for help and then gives a MOD some attitude when he's trying to help him, when in reality if you had mentioned previously that you powered on your machine while your jumper was in clear mode we could have told you that you might have damaged your board. (As it states in your manual!) X(

Similar Messages

  • My ipod has a blank white screen and wont change no matter what i press or try.. what should i do?

    my ipod has a blank white screen and wont change no matter what i press or try.. what do i need to do?

    Try here:
    iOS: Not responding or does not turn on
    If you can't turn it off, let the battery fully drain. After charging for at least an hour try again.
    If still problem  that indicates a hardware problem an an appointment at the Genius Bar of an Apple store.

  • My ipod wont start no matter what do

    my ipod is stuck on the apple logo no matter what i do, i trien connecting it to itunes and it did but its still stuck to the apple logo and everytime i turn off it goes back to the apple logo after 2 sec

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • K7n2 delta wont boot

    i need some help please guy s, ive just built a system with these specs
    k7n2 delta
    barton 2500
    kingston ram 2700 2x 256
    80g 7200 2m cache hdd
    gforce 4 mx4000 msi
    350w psu
    after building and trying to boot it getts to the "initialize floppy drive controller" signal on the d bracket (the floppy also does the green light and scanning noise thing) and the system and d bracket lights hang there, it wont go any further. any ideas guy s? is the mobo D.O.A ?
    really need the help so any is very appreciated thx

    thx alot, i really hope you fix it i know how it is :s.
    ok update guys im running a cd rom on 1 ide (in master) and then the hdd on anouther ide (also master) so i unplugged the cdrom and ran just the hdd in master, that got me to the boot screen (i.e the hit del to get into bios screen). i get this msg
    primary master = none
    primary slave = none
    secondary master = h
    secondary slave = none
    secondary master hard disk fail
    i think its a hitatchi hdd so is it not seeing it properly and therefore only writing the first letter hense the H ?
    ? does this mean my hdd is incompatibly or broken or what ?
    once agian any help is good thx guys
    in reply to above they seem ok to me cant see a prob there as theres only one way the ide cables will go in on the new rounded ones. :s

  • MSI KT6 Delta wont boot

    My MSI KT6 Delta system no longer boots any further than the memory test? why? any ideas? any solutions other than replacing the motherboard etc.
    some background:
    motherboard: MSI KT6 Delta
    CPU: AMD Athlon XP 2800
    Memory: 1Gb branded
    Graphics: Geforce FX 5200 AGP
    PSU: Antec TrueBlue 480
    Screen displays the memory test then a message relating to BIOS setup i.e. "Del: BIOS Setup" plus a new option i dont remember seeing previously namely "F10: Flash recovery" btw pressing 'del' doesn't help you cant get into the BIOS setup.  Having cleared the CMOS via JBAT1 i now just get the MSI Welcome screen.  If it helps the D-Bracket displays a red led top left.
    its all a bit odd really, everything was fine on Friday night, but come Saturday morning its all gone pear shaped.
    any help appreciate

    OK. Well, the procesor is where I'd start troubleshooting.
    Step one would be to unplug power cable and other cables on the back of the computer, wait a while ( you'll hear a faint zzipp  ), and then move JBAT jumper in order to clear CMOS. That will force you into BIOS.
    Eh, thought of something. BIOS will stop sometimes if it can't find a keyboard. And you say entering BIOS is impossible. Perhaps you have more than one problem? a) processor's BIOS settings are impossible, b) the keyboard hinders you from entering BIOS. However, the CMOS clearing should in either case be a good start.
    Your problem very much reminds of what happened to me and others while playing with CoreCenter. I know you didn't but can't help saying so.

  • My itunes 7 wont load. no matter what i do.HELP i need music.

    When i click to open itunes 7, it does not load.
    Well, what it does do is load yet it doesn't show up in anywhere but the [task manager(TM)]. Since, i open the TM
    and i see all my processes itunes is one of them and then i try to end the process and it wont work. the only thing i can to to close the process of itunes in the TM is turn off or reset my comp.
    It is irritating as i have had this issue a few times before with version 6, but i just attributed to it to me closing a process or having too much open at once...since, that was usually the case.
    Now its happening for no reason, as itunes will be the only thing i try to run. so if anyone has a similar issue and fixed it or has input. it is appreciated.

    Well, what it does do is load yet it doesn't show up in anywhere but the [task manager(TM)]. Since, i open the TM
    and i see all my processes itunes is one of them and then i try to end the process and it wont work. the only thing i can to to close the process of itunes in the TM is turn off or reset my comp.
    i've seen that symptom before.
    a preliminary question aimed at narrowing in on possible culprits: by any chance, do you have Norton Internet Security 2005 installed on that PC?

  • Remote app on 3GS - wont connect no matter what i do

    Hi i have two computers - a mac book pro and a tangent (supplied to me by my university). I cannot connect my remote app to either computer. I feel that it has something to do with the firewall (symantec on both computers). I have no idea how to go about changing the ports or whatever is needed, if this is even the problem. I have no idea what to do and this is seriously starting to frustrate me. I have already unistalled and reinstalled the app with no luck. If anyone knows how to fix this your input would be really helpful. Thanks.

    I don't think I have the norton personal firewall - i have the symantec anti-virus tho. I also have to access our network via cisco NAC clean access agent. I feel that this has something to do with the problem because we didn't have this system last year. But my firewall is completely off under system preferences -> sharing -> firewall. I'm pretty clueless as to what else could possibly causing the problem.

  • Help!!! hkey_local_machine...?????? Quicktime wont install no matter what!

    okay so every time i try to install itunes and quicktime, this little thing pops up that says
    "could not open key: hkeylocalmachine\...\QuickTimeUpdater.exe. Verify that you have sufficient access to that key, or contact your support personell."
    what the heck does that mean?!?!?!
    i am a conmputer admin. so i know its not that... i cant for the life of me figure it out and my ipod is useless until i do! please help!!
    intel   Windows XP  

    good gracious ... from your other post, i'm assuming that you had one of those strange ones where there were permissions for some accounts missing on the QuickTime keys? (i've seen that also associated with HKey errors on the installs.)
    at any rate, i'm glad you're up and running again.

  • HELP! adobe audition cc 2014, wont play no matter what,

    The other day I was working on a project and everything was fine the next day when I re opened the project it wouldn't play. As far as i know i didnt change anything. I can move the tracks around and everything is still there but when i click the play button nothing happens, its not greyed out or anything just nothing happens. I tried re starting the program, then re starting the computer, then updating the program, then re installing the program nothing changed. Anyone know what the issue could be

    The first thing to check when this sort of thing happens is the audio settings on your sound card/interface.  If you're on Windows, go to the Sound Control panel, click on Playback Devices, highlight the device you're using, hit Properties then advanced and make sure the drop down is set to what you're using.  It's probably worth doing the same series of things in the Recording Devices tab.  Note that, with some external interfaces, you may have to do this in the dedicated software for the interface, not the generic Windows Sound Control panel.
    Then go to Edit/Preferences/Audio Hardware and make sure Audition is set to match what you have set on the interface.  Also check the Device Class which is your drivers.  I sometimes find it's best to actively reset the Device class away from what you're using then back.  Make sure you okay/save.
    ....or, if you're on a Mac, you need to do the same things but I have no idea where the controls are.

  • My ipod touch 5g home button wont work no matter what i try!

    Ive tried everything apple said to do and all the concepts, like rubbing alcohol! im not sure what to do. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it at an Apple store by making an appointment:
    Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod
    - There are third-party places like the following that will repair the Home button. Google for more.
      iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • HT201210 my iphone 4 wont update, no matter what i try

    I'vw tried getting the new ios 7 update, but nothing works for my iphone 4. What should I do?

    Just have to give it some time. The download, activation, and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
    = L.I.

  • My ibook battery wont charge no matter what i do.

    i went to unplug my ibook g4 and i got a shock, after that i noticed my adapter plug wasnt lighting up at all. after that i noticed my battery wasnt charging at all. i asked my friend what i should do and he told me to drain the battery and reset it. i did what he said and nothing happened, my ibook only works plugged in, i know its not the adapter because i plugged it into my friends ibook and it lit just fine. im wondering if maybe its the dc board or just the battery. any suggestions or help would be really....really...super cereal great!!!!!!

    I'm a college student with a 3 1/2 year old iBook. Never had any problems until about a week ago. I was on aol and noticed that the battery was getting really hot. I've never replaced the battery because seemingly it recharges fine. However, now upon powering on my ibook, I have to remove the battery to get the power up screen. I've kept it in great shape and have never spilled anything. I wonder what's the problem? The blue screen had lines and appears fuzzy and sometimes goes completely blank.
    Worried Student

  • Updates wont install no matter what i do

    I have Windows 7 ULTIMATE and something happen where I know have (6) updates that wont install. Five (5) are window 7 updates and one(1) is for Internet 11

    Hi azahole,
    Do you receive any error message about this issue?
    Please upload and share the windowsupdate.log as MVP S.Sengupta mentioned.
    Please take the following steps for troubleshooting:
    1. Download and run the Windows Update Troubleshooter.
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
    2. Download and run the Windows Update Readiness Tool.
    http://www.microsoft.com/en-us/download/details.aspx?id=20858
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Ipod wont reset no matter what

    I've had my fifth gen ipod for about a year now, with no problems before this. Basically I was listening to music and then the screen froze for a few seconds, a few minutes later it appeared on screen that I had to restore my ipod to factory settings. So i went to my computer to restore and it just keeps on restoring, it seems to be on a loop. Apart from the time when it said that the ipod was corrupted. I have tried to restore the ipod about 10 times now to no avail. Can anyone help? When the ipod is not connected to the computer a sign comes up to say it needs to be connected and restored although i know that the ipod is empty now as the gb are free. What can I do? I was thinking to let the battery die down, but it keeps charging up as i connect it on my USB.
    Please can anyone help!
    Thanks

    There are two things that I can think of that may help. Digital equipment has to have the approperiate amount of power in order to work the way it is supposed to work. My ipod is having battery problems, but I do not yet want to send it back for a battery replacement. I have some old items for a 3rd generation ipod that do work with the 5th generation ipods (I have a 30 and a 30 gig ipod). These item are: Apple ipod FireWire Power Adaptor, and a Apple ipod Dock Connector to FireWire and USB 2.0 cable. By using these products, it allows me to connect to an external power source and to the ipod (to keep the battery changed to I can do what I need to do-and to allow it to work the way it is supposed to work). It, at the same time, allows me to connect the USB cable to the computer, so I can connect to the itues library, or to do a restore. Normally once this is done, then you will not have to do a restore, and as long as you have an external power supply the ipod will continue to work normally (example I have an external power supply in my car to play the ipod thru my radio). But if I do not have the external power supply connected, then the USB cable alone will not charge the ipod, power goes down, and the ipod will not allow me to do anything that I normally can do. It is not a issue that the USB cable is not connected to a power USB outlet, the USB will not charge the ipod for some reason, but the external power will. I have tried different computer and different USB connections, and the problem remains the same. The last option is to sign up for the Battery Replacement Program, and send in your ipod to be replaced, as the battery does not work. It costs a little, but it is better than having an ipod that does not work. Hope this helps.

  • Web services wont work no matter what i do

    got a new laserjet MFP M127FW and everything thus far works except eprint.
    IF i can get it to enable, it only does so after i reboot (power cycle) the printer.
    if i try and enable it via the web management it will never say it was enabled, it just clocks (spinning icon that says connecting)
    then SOMETIMES the web interface will say its enabled and SOMETIMES i can see the randomly generated email it gives me, BUT it only lasts for about 5 minutes then Web Services disables itself again.
    i have forwarded everyport listed in this forum and the how to created by someone here.
    I have even put the printer in the DMZ - still doesnt work.
    N-O-T-H-I-N-G is making Web services work... period.
    I have flashed the firmware to the latest (did that right out of the box)
    there is nothing left for me, as the user to do... eprint/web services is broken. period.
    i saw someone state that the code that is supposed to print is the name in the randomly generated email you are given.
    and i tried to use that to register the unit on hpconnect but it just says "unexpected error"
    also when i try to do things from the lcd screen, such as print information sheet, enable/disable web services, view email, it just clocks (never ending spinning icon.. i left it like that overnight and it never stopped.
    IF i am fast enough and see the randomly generated email in the Web GUI, and then try to use the LCD to print the code, or do anything aside from via email, (which it does display if the web gui shows it) it says the services are unavailable
    once again, i have spent the last 2 days, totalling over 10 hours trying to make this work and IF it is enabled, i think it is just a false positive, even though the random email does display it doesnt work and then within 5 minutes, web services disables itself again.
    I am not some average user, i am a 20yr veteran of PC/MAC/Networking, and i have never seen a printer do this that wasnt flat out broken.
    but since this is the only thing not working, thus far, i believe it to simply be a firmware issue.
    lastly.... when trying to enable the web services the NIC lights on the back of the printer are blinking 100% nonstop, forever and ever.. until i power cycle it.
    its as if the web services is locked up or stuck in a loop.
    also restore defaults from the LCD or web GUI doesnt do anything... nothing is changed... and i am never presented with the initial startup like one would expect.
    is there a way to force the printer to an out of the box state where it flushes anything and everything back to a factory state? (where i have to go through the initial setup again ?
    p.s.
    network settings are fine, i can print to the printer from ipads, iphone, pc's and 2 MAC's.. so everything on the network side works... just not Web services
    This question was solved.
    View Solution.

    I was able to talk to a fantastic tech in cloud services who remembered a nun documented fix
    USE THE LEVEL 3 DNS SERVERS!!! No other DNS servers will work
    This literally within 10 seconds made HP Web Services work!!!!
    209.244.0.3
    209.244.0.4
    I Switched my entire network to this
    Huge kudos to cloud services!!!

Maybe you are looking for