Delte row in analysis item from planning function

Hello,
how can i implement a command function to delete a whole row in the planning function in WAD?
I want that i user can mark a whole row and push after it a button to delete it.
Thank you for your help

Hi.
I think in [this thread |Add and Delete rows in manual planning;you can find an answer.
Regards.

Similar Messages

Execute planning function in Web template for selected row in analysis item

Hello all.
I have been trying several different solution for this issue I have, but could not ,make it work. Hopefully, any of you can give me some ideas.
Initially the scenario seems to be easy.
I have a Web template were I show a query analysis item with costcenter, plan/act type, user and entry date. I allow single record selection in this item.
I have a button that should execute a planning function from the plannig modeler.
The planning function should be executed only for the costcenter and plan/act type which are selected in the analysis item.
How do I have to link the two objects :analysis item and planning function, so that the planning function is executed with the correct filter? What should be the filter definition (if any expecific things to consider)?.
Thanks in advance for your help.
Best regards,
Alfonso.

Dear Deepti.
Thanks a lot for your answer, but it did not solve my issue.
The problem is that my query is not created over the same agregation level as the planning function is, and as per the link you have sent me it seems to be a prerequisite.
Is there any other way to do it?
More in detail, I am implementing a Lock/Unlock mechanissim for planning costcenters. I have a n ODS where I store my costcenetr status(lock or unlock) and I also have a cube where the planning values are stored.
My query(to select the costcenter to unlock) is done from the ODS, and my planning function is done in an aggreagation level of my cube (this is to lock the costcenter in cube, to avoid incorredct updates while it is unlocked/locked).
The issue that I have is that I can not find a way to send the selected information from the query to the planning function.
I hope you have more ideas.
Thanks a lot.

Want to count the number of rows of analysis item in WAD Template

HI all,
Detail Description:
In my WAD report, i have a Export to Excel Option. But I want when I click on this button, one pop up will come only if no of rows of the Analysis Item is Greater than 10,000 ask for Do you want to proceed or not.
Means 1st i want to count the no of rows in the Analysis Item, after that it will check, if the no of rows is greater that 10,000. then the pop up will come.
Question:
Does anyone know, "how to count the no of rows of the analysis Item ?" . It will be better if you know you to implement this with the help of java script.
Means there must be some varible, which counts the no of rows. If you know then please help me

Hi,
Please find the below link which helps you to get solution of your question.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0bbb20f-2d7e-2e10-258f-8655daa41fab?QuickLink=index&overridelayout=true
It is mainly used to automate queries, web templates, and reports in different output formats like PDF, Excel,
XML, XHTML, and HTML
How to see WAD reports on browser:
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
Regards
Sudheer

Execute planning function in Web template for selected item in anylisys ite

Hello all.
I have been trying several different solution for this issue I have, but could not ,make it work. Hopefully, any of you can give me some ideas.
Initially the scenario seems to be easy.
I have a Web template were I show a query analysis item with costcenter, plan/act type, user and entry date. I allow single record selection in this item.
I have a button that should execute a planning function from the plannig modeler.
The planning function should be executed only for the costcenter and plan/act type which are selected in the analysis item.
How do I have to link the two objects :analysis item and planning function, so that the planning function is executed with the correct filter? What should be the filter definition (if any expecific things to consider)?.
Thanks in advance for your help.
Best regards,
Alfonso.

Dear Deepti.
Thanks a lot for your answer, but it did not solve my issue.
The problem is that my query is not created over the same agregation level as the planning function is, and as per the link you have sent me it seems to be a prerequisite.
Is there any other way to do it?
More in detail, I am implementing a Lock/Unlock mechanissim for planning costcenters. I have a n ODS where I store my costcenetr status(lock or unlock) and I also have a cube where the planning values are stored.
My query(to select the costcenter to unlock) is done from the ODS, and my planning function is done in an aggreagation level of my cube (this is to lock the costcenter in cube, to avoid incorredct updates while it is unlocked/locked).
The issue that I have is that I can not find a way to send the selected information from the query to the planning function.
I hope you have more ideas.
Thanks a lot.

BI-IP - Bex Analyser - select excel single row and aplly planning function

Hi experts,
In BI-IP (BW 7) with Bex Analyser, is it possible to select a single excel row (or a range of rows) and then apply a planning function? I know that in WAD it's possible with the binding option to select a single web item.
The purpose is to apply a revaluation factor to selected (by the user) cost elements rows in the workbook.
Thanks and regards,
MA

Hi
It is possibel in WAD to select one or many rows while executing Functions such as--Reposting; Revaluation etc.
However, you should be in a position to select the rows based on....unique identifier such as Require ID; Request #; Serial #; ....this is more so in case of multiple entries for the same cost element for different combinations.
Regards
Srinivas

Execution of a planning function for a row selection of a hierarchy node

Hi all!
Has anyone accomplished to make a configuration, where a planning function would have been executed for a hierarchy node selection and this selection would have been made by a row selection in an analysis item? I can filter the characteristic in a lowest level by selecting rows in analysis item, but if I would select a hierarchy node, the value for the characteristic is empty. I have set the selection state by binding the item_characteristic of analysis item to filter of the other characteristics.
I tried first to reach this functionality by filtering the characteristic with variables in planning modeller filter and determining the values of the variables during runtime by the selection of the analysis item row selection. But I can not implement it as the display hierachy and the hierarchy node selection in the analysis item are variables and modeller does not allow selection of a hierarchy node and hierarchy by variables - even thoug it let's you do it (I receive error message saying "field hienmflag with value 5 is not correct").
Greatful for any working solutions tips you have made up!
Sari

Thanks for the explanation. I come from BPS background and there are few changes when it comes to planning functions in IP. In BPS, the planning function is a bit loosely tied to Planning Package in a sense that a planning function can use any planning package under the planning level to which it belongs. Same is the case in IP (technically), but in BPS the planning package contains all the characteristics and key figures of the planning level and hence the function can execute correctly. What I see in IP is that planning function is very loosely tied to Filter. It can use any filter under the aggregation level even though they differ in the characteristics and key figures. I have tried a PF with different filters and it executes with everyone of them! This doesnu2019t sound right! Am I missing something here?
Also, you can only execute a IP planning function if it is included in a planning sequence. An extra step! The modeling is so intuitive in BPS that IP is a bit repulsive.

IP - Is it possible to call exit planning function from ABAP Report..

Hi All,
Greetings.
Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
Or if somebody has done in BPS, appreciate if it can be shared too .
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi.
You can achive this as suggested by Mattias in your previous post.
Lets say you have next data structure:
CostCenter | Amount | PercentForDistibution |
Create input ready query in this format. Restrict cost center by variable type range.
Create WAD with analysis item.
When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
I assume you have data only for 101004 in your cube (lets say 1000).
You will see only one record in your webpage.
CostCenter | Amount | PercentForDistibution |
101004       | 1000     | NOTHING
When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
Just add 6 new records:
CostCenter | Amount   | PercentForDistibution |
101005       | NOTHING| 10
101006       | NOTHING| 30
101007       | NOTHING| 20
101008       | NOTHING| 25
101009       | NOTHING| 5
101010       | NOTHING| 10
Then run planning FOX function like this:
FOREACH Z_COST_CENTER.
IF {Amount, Z_COST_CENTER} <> 0
Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
ENDIF.
ENDFOR.
FOREACH Z_COST_CENTER.
IF {PercentForDistibution Z_COST_CENTER} <> 0.
{Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
ENDIF.
ENDFOR.
It is not perfect FOX, but as an idead, it should work.
Regards.

WAD 2004s Analysis Item Row Select RRI_RECEIVER does not pass Filter values

I have created an Analysis item and using a Data Provider that has a Sender-Reciever entry for it. I created a Command on the Row Selection Activation that does an Report to Report (RRI) jump to another web page(template or app whatever sap calls it). When running the page, it performs the jump to the other page, but does not filter the page on the selected hierarchy value on the original page.
Why does this not work?
If I do the same thing by selecting the Goto from the context menu on the cell it works fine.

Answering my own question here....
This was solved by applying the patch mentioned in Note 1115027.

Distribute by Reference Data from Sender to Recipient planning function?

Hi all;
Im trying to use the planning function Distribute by Reference Data from Sender to Recipient to distribute the reference data by material to plan data.
This is:
Reference Data:
Version: 001
0vtype: 010
Material: M1; M2; M3
Sub-brand: SB1;
Price Group: PG1;
Customer: C1;
Area Manager: AM1;
Exercise/Period: 001.2008; 002.2008; 003.2008
Quantity: 100; 200; 300 -> 600
Plan Data 1:
Version: 002
0vtype: 02
Material: #
Sub-brand: SB1;
Price Group: #
Customer: C1;
Area Manager: AM1
Exercise/Period: #
Quantity: 1000
I want to distribute the 1000 according with the material reference data. The plan doesnt consider the Price Group and Exercise/Period.
Goal:
Plan Data 2:
Version: 002
0vtype: 02
Material: M1; M2; M3
Sub-brand: SB1;
Price Group: #
Customer: C1;
Area Manager: AM1
Exercise/Period: #
Quantity: 167; 333; 500
M1 = 100 / 600 * 1000
In the planning function I had use:
Fields for change:
Material: 0 - ZZ
Fields for conditions:
0vtype: 020
Exercise: 2008
Key figure: quantity
Version: 002
Old material: #
Reference characteristics:
0vtype: 010
Exercise: 2008
Material: (I didnt fill because it doesnt allow all the material items)
Key figure: quantity
Version: 001
When I execute the function a message appears:
No reference data
Can anyone help me?
Regards;
Ricardo

Hi,
price group is missing in your reference data
D

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

Sales Analysis Item Tab Function Not Showing Orders Dollars

Hello Gurus of SAP B1.
This pertains to SAP B1 SP 00 PL 16 Version 8.8.
While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
Does anyone know why this might be happening and/or how to fix this???
Thanks in Advnace - Zal

Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting. My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also. I am certain I have done it before in SAP 2007A...
Has there been a change to the item/sales order table in Version 8.8???
Take care my FFF - Zal

Reposting of Planned Line Items from One Cost Ctr to another

Hello SAP Gurus,
Can you tell me the process hoe We can repost planned line items from one coct center to another ?

Hi,
You can use Transaction code KP06 to update the changes to the plan data for the Cost Centers. There is no separate transaction code to repost plan data for Cost Centers.
Thanks
Murali.

How To... Execute Planning Functions and Sequences from MS Office Ribbon

Dear all,
I am working with a SAP how to paper, which is called:
How To... Execute Planning Functions and Sequences from MS Office Ribbon.
It is working absolutely fine and I am pretty satisfied, but as you probably know "Control the visibility of a button based on the visibility of a related crosstab: the button just disappears once the related crosstab is not located on the active sheet."
This means, when I insert different queries in different crosstabs, only one crosstab will have my own created ribbon. Is it also possible to set another specific ribbon with other buttons for another crosstab? Can I change the macro, included in the appendix of the how to paper, regarding this issue?
Thanks in advance!
Kind regards
Dominik Drebinger

Hey Martin,
thanks for your reply, but I solved the problem on my own. Unfortunately my colleague did not see that the crosstabs had to be defined differently.
Like this:
Label
Screentip
Msolmage name
Crosstab name
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab1
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab3
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab5
The macro, provided by the HowTo, is therefore working perfectly fine.
Thanks though
Dominik

I would love to be able to drag and drop items from one page to another from the plan window. Is that possible?

In desiging my website, I would like to be able to move items from one page to another by dragging and dropping from the plan architecture screen. It might also help if the window could have a zoom in and out feature to facilitate that.

I just tried zooming in the plan window and discovered it works.

Copy item from List A to List B, generate 2 rows in List B

Hi,
I would like to copy and update items from List A to List B. However, I want the item to be duplicated in List B.
I will explain my scenario
- List A contains a People Picker column of multiple selection and a Title column
- When the form is submitted, a workflow should trigger to copy the item to List B. If the People Picker column contains 2 values inside it, for example, user1;user2. The copied item should be duplicated in rows according to the number of users.
Example
Columns Title, Users, ID
List A - TicketNo1, User1; User2, 1
List B - TicketNo1, User1 1
List B - TicketNo1, User2 1
Can this be done OOTB or must we use some event receiver..has anyone ever done such a thing before?

Hi,
Below code help you to accomplish your task using event receiver
public
override void ItemAdded(SPItemEventProperties properties)
//base.ItemAdded(properties);
if (properties.ListTitle ==
"ListA")
SPUser user = null;
//get value of fields
string strTitle = Convert.ToString(properties.ListItem["Title"]);
SPFieldUser userField = (SPFieldUser)properties.ListItem.Fields.GetField("TaskAssignUser");
SPFieldUserValueCollection fieldcollectionValue = (SPFieldUserValueCollection)userField.GetFieldValue(Convert.ToString(properties.ListItem["TaskAssignUser"]));
foreach (SPFieldUserValue fieldValue
in fieldcollectionValue)
                   user = fieldValue.User;
                   //Create items in another list
SPList destinationList = properties.Web.Lists["ListB"];
SPListItem targetItem = destinationList.Items.Add();
                   targetItem["Title"] = strTitle;
                   targetItem["WorkAssigned"] = user;
                   targetItem.Update();
Thank You,
Somnath Matere

Delte row in analysis item from planning function

Similar Messages

Maybe you are looking for