Deluge-console can't connect when running daemon

To date, I have always run deluged as my user. I started the deluged daemon (rc.d start deluged) but find myself unable to connect via deluge-console.
[ERROR ] 10:05:50 client:393 RPCError Message Received!
RPCRequest: daemon.login(, )
File "/usr/lib/python2.7/site-packages/deluge/core/rpcserver.py", line 259, in dispatch
ret = component.get("AuthManager").authorize(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/deluge/core/authmanager.py", line 87, in authorize
raise BadLoginError("Username does not exist")
BadLoginError: Username does not exist
The wiki offers no guidance on deluge-console. Is this expected behavior? The gtk client works fine btw.

While searching for the problem, I crossed your thread and thereafter, found a solution :
Launch deluge-console as usual.
It will throw the error, but you can still use the deluge shell, so connect to the daemon using this command :
connect localhost user password
Replace localhost by the host if it's a remote machine, user and password by the ones you use in the authentification config of Deluge.

Similar Messages

Legal Consol: Received CSD Errors when running SPRUNCONSO

Hi All,
I configured Legal Consol application under BPC 7.0 MS and I've below error message when running SPRUNCONSO:
Warning : Nothing Extract From Ownership for OPENING Period
ERROR CSD-130 Problem Extracting data from the Fact
ERROR CSD-135 Problem Extracting data : C_FINANCE
ERROR CSD-140 Problem extracting Data : C_DATA
ERROR CSD-150 Problem extracting Data : C_REPART
ERROR CSD-160 Problem extracting Data : C_CONSO
20091200 - 0 Rows Calculated
20091200 - 0 Rows Updated
Below are my configuration steps:
1. Account Dimension:
    - Populate TYPELIM Property for account related to interco elimination.
2. Datasrc Dimension:
    - Populate IS_CONSOL Property (value = Y) for source DataSrc (INPUT)
    - Populate DATASRC_TYPE Property (value = A) for destination DataSrc (AJ_ELIM)
3. Entity Dimension:
    Property ELIM = Y for entity related to elimination
4. Groups Dimension:
    Currency_Type = G for Elimination Group
4. Business Rule:
    - Automatic Adjustment:
       Adjustment ID = ELIM01
       Source Data Source = INPUT
       Destination Data Source = AJ_ELIM
       Adjustment Type = Generic
      Adjustment Level = 0
    - Automatic Adjustment Detail:
       Adjustment ID = ELIM01
       Source Account = IC_APAR
       Destination "ALL" Account = IC_APAR (same value under TYPELIM Property for account dimension member)
       Destination Group Account = IC_APAR_CL (same value under TYPELIM Property for account dimension member)
       RuleID = RULE040
4: Business Rule Library:
    - Consolidation Rules:
       RuleID = Rule040
       Rule Type = ALL
    - Consolidation Method: 100
    - Consolidation Rules Formula:
      RuleID: RULE040
      EntityMethod: 100
      IntcoMethod: 100
      "All" Formula: 1
      Group Formula: 1
5. Set Ownership data for 2008.Dec until 2009.Dec (data existed in tblfactownership)
6. Set Foreign Exchange Rate from 2008.Dec until 2009.Dec
7. Stored Procedure:
    *RUN_STORED_PROCEDURE = SPRUNCONVERSION([%APP%], [%CATEGORY_SET%], [], [%GLOBAL], [%SCOPETABLE%], [%LOGTABLE%])
    *RUN_STORED_PROCEDURE = SPRUNCONSO([%APP%], [%CATEGORY_SET%], [%SCOPETABLE%], [%LOGTABLE%])
    *COMMIT
I've been trying to crack it but i still received same error message. Can anyone share what i might have missed?
Thanks a lot for the advice,
Liam

Hi,
I think there is a syntax problem in your SPRUNCONSO call. GROUPS_SET variable is missing. The syntax should be like this:
*RUN_STORED_PROCEDURE = SPRUNCONSO([%APP%],[%CATEGORY_SET%],[%GROUPS_SET%],[%SCOPETABLE%],[%LOGTABLE%])
In addition, not sure if it's a typo problem or not, but it seems that your call for the SPRUNCONVERSION is also wrong. Some variables are also missing:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION([%APP%],[%CATEGORY_SET%],[%CURRENCY_SET%],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%])
Then, for all the error codes, you can get rid of those one using the ON_ERROR_CONTINUE, at the end of the line.
Normally, those kind of error message are generic, and informed the user that there is actually no records that should be the source of the SPRUNCONSO stored procedure.
Hope this will help you.
Kind Regards,
Patrick

Bridge can't connect when roaming?

Not sure if this is a real problem with BB Bridge.
I'm overseas right now and the BB is on roaming mode with a foreign carrier. When I tried to connect the PB with it, I get the following message,
BlackBerry Bridge is Locked
Your BlackBerry smartphone could not be found
Please check that:
- Your BlackBerry smartphone is in range
- Your BlackBerry smartphone is turned on
- Your BlackBerry smartphone's Bluetooth connection is turned on
I've checked and everything is turned on. Could it be that when it's BB is roaming, the PB can't connect?
Anyone with similar experience?
Solved!
Go to Solution.

roaming should not affect bridge as it is a blue Tooth connection.
Then perform a Battery pull please, with the BlackBerry smartphone powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
on Playbook press power button and both Vol + - buttons for 10 seconds to reboot it.
if above dont work
delete the BlueTooth Bridge profiles on both devices
Then perform a Battery pull please, with the BlackBerry smartphone powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
on Playbook press power button and both Vol + - buttons for 10 seconds to reboot it.
setup bridge again and see if it persists.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Airport Extreme - can't connect PC running Vista to internet

My brother is visiting with his laptop running Vista and can't connect. We have tried to remove all security controls but can't find where to disable. I have been to AE Utility but am unsure what to do once I get there...
Any help is appreciated

Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure. Enter the base station password, if necessary.
Click Change Wireless Security.

DB Console can't connect to Database

To all,
Trying to get a test instance of 11.1.0.7 up in VM Ware on OEL 5. Instance and OEM installed fine--I've dropped and recreated my repository, but OEM still can't see the database. Here is the error stack I see in the emoms.log:
2009-03-04 01:52:06,110 [HTTPThreadGroup-11] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 170
02; Cleaning up cache and retrying
2009-03-04 01:52:13,059 [HTTPThreadGroup-7] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = https://rac1.sys.com:3938/emd/ma
in)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Io exception: Socket read timed out)
2009-03-04 01:52:13,205 [HTTPThreadGroup-4] ERROR conn.ConnectionService verifyRepositoryEx.887 - Invalid Connection Pool. ERROR = Io exception: Socket read
timed out
2009-03-04 01:52:20,935 [HTTPThreadGroup-5] ERROR conn.ConnectionService verifyRepositoryEx.887 - Invalid Connection Pool. ERROR = Io exception: Socket read
timed out
2009-03-04 01:52:21,112 [HTTPThreadGroup-11] ERROR conn.ConnectionService verifyRepositoryEx.887 - Invalid Connection Pool. ERROR = Io exception: Socket read
timed out
2009-03-04 01:52:21,134 [EMUI_01_52_21_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has al
ready been committed
java.lang.IllegalStateException: Response has already been committed
Any thoughts? emctl status output below:
test1 /U00/app/oracle/product/11107/db_1/rac1.sy.com_test1/sysman/log> emctl status agent
Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
Copyright (c) 1996, 2008 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.4.0
Agent Home : /U00/app/oracle/product/11107/db_1/rac1.sy.com_test1
Agent binaries : /U00/app/oracle/product/11107/db_1
Agent Process ID : 32520
Parent Process ID : 32490
Agent URL : https://rac1.sy.com:3938/emd/main
Repository URL : https://rac1.sy.com:1158/em/upload/
Started at : 2009-03-04 01:35:36
Started by user : oracle
Last Reload : 2009-03-04 01:38:08
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 80
Size of XML files pending upload(MB) : 15.03
Available disk space on upload filesystem : 41.57%
Data channel upload directory : /U00/app/oracle/product/11107/db_1/rac1.sy.com_test1/sysman/recv
Last attempted heartbeat to OMS : 2009-03-04 02:06:44
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
Edited by: jdanton on Mar 4, 2009 11:08 AM
Edited by: jdanton on Mar 4, 2009 11:09 AM

Oracle 11g.
I have the same error
[HTTPThreadGroup-11] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = https://server:3938/emd/main)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: Io exception: Socket read timed out)
Any one have found a solution to the problem.
_Pete

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

Can't Connect When Specifying Database Name

Hi all,
I have an issue with an Oracle 9 database where I can connect if I do not specify a database to connect to but when i do specify one i get an error.
For example, my database is called WEB. If i open sqlplus and type connect username/password it will connect fine. If I type connect username/password@web I get an error.
The full error that appears in the log is:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
*32-bit Windows Error: 5: Input/output error*
I have checked the tns entries and listener file and both are fine. Here are the entries:
TNSNAMES:
WEB =
*(DESCRIPTION =*
*(ADDRESS_LIST =*
*(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = web)*
LISTENER:
LISTENER =
*(DESCRIPTION_LIST =*
*(DESCRIPTION =*
*(ADDRESS_LIST =*
*(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))*
*(ADDRESS_LIST =*
*(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))*
SID_LIST_LISTENER =
*(SID_LIST =*
*(SID_DESC =*
*(SID_NAME = PLSExtProc)*
*(ORACLE_HOME = D:\OraHome_1)*
*(PROGRAM = extproc)*
*(ENVS = "EXTPROC_DLLS=ANY")*
*(SID_DESC =*
*(GLOBAL_DBNAME = web)*
*(ORACLE_HOME = D:\OraHome_1)*
*(SID_NAME = web)*
This is on a Windows machine and I have checked and all the services are running. I have also checked the sqlnet.ora file for this entry:
SQLNET.AUTHENTICATION_SERVICES= (NONE) and tried it with NONE and NTS.
WEB is the only database on the Oracle server.
Can anyone suggest a solution to this problem?
Edited by: ThomasK on Jul 19, 2010 2:10 PM

Here are the results from the commands:
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\ava>lsnrctl service
LSNRCTL for 32-bit Windows: Version 9.2.0.4.0 - Production on 19-JUL-2010 15:03:
33
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "web" has 2 instance(s).
Instance "web", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "web", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:5 state:ready
LOCAL SERVER
Service "webXDB" has 1 instance(s).
Instance "web", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: 296508-WEB3, pid: 3812>
(ADDRESS=(PROTOCOL=tcp)(HOST=296508-web3)(PORT=2667))
The command completed successfully
C:\Documents and Settings\ava>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ava\Application Data
CLIENTNAME=SERENITY
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=296508-WEB3
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ava
LOGONSERVER=\\296508-WEB3
NUMBER_OF_PROCESSORS=4
OPENSSL_CONF=C:\OpenSSL-Win32\bin\openssl.cfg
OS=Windows_NT
Path=D:\OraHome_1\bin;D:\OraHome_1\jre\1.3.1\bin;D:\OraHome_1\jre\1.1.8\bin;C:\P
rogram Files (x86)\Windows Resource Kits\Tools\;C:\Program Files\ava Tools\;
C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\D
ell\SysMgt\RAC5;C:\Program Files (x86)\Dell\SysMgt\oma\bin;C:\PHP;C:\PHP\ext;C:\
Program Files\MySQL\MySQL Server 5.1\bin;C:\PHP\libmcrypt.dll;C:\PHP\ext\php_mbs
tring.dll;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Micr
osoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools
\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86
)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86
)\Microsoft SQL Server\100\DTS\Binn\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1;.VBS
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SESSIONNAME=RDP-Tcp#3
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\~1\LOCALS~1\Temp\1
TMP=C:\DOCUME~1\~1\LOCALS~1\Temp\1
USERDOMAIN=296508-WEB3
USERNAME=ava
USERPROFILE=C:\Documents and Settings\ava
windir=C:\WINDOWS
C:\Documents and Settings\ava>tnsping web
TNS Ping Utility for 32-bit Windows: Version 9.2.0.4.0 - Production on 19-JUL-20
10 15:03:33
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
D:\OraHome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_
NAME = web)))
OK (0 msec)
C:\Documents and Settings\ava>ping 296508-web3
Pinging 296508-web3 [192.168.100.42] with 32 bytes of data:
Reply from 192.168.100.42: bytes=32 time<1ms TTL=128
Reply from 192.168.100.42: bytes=32 time<1ms TTL=128
Reply from 192.168.100.42: bytes=32 time<1ms TTL=128
Reply from 192.168.100.42: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.100.42:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\ava>lsnrctl status

Unable to establish loopback connection when running junit tests

Hello,
I just started using jrockit (jrockit-jdk1.6.0_20-R28.1.0-4.0.1) and I encounter a problem running junit tests.
I have 2 tests in the same junit suite, both do binding to 127.0.0.1.
The first test succeeds in the binding. Once it finishes, the second one tries to bind to same address and fails due to IOException, Unable to establish loopback connection (logs below)
If I run them using sun's hotspot jvm they work fine.
If I run them separately, i.e, only one test per suite, each works fine.
It seems that only when switching to jrockit I get the problem.
Any idea?
Thanks,
Edo
Logs:
ERROR [Main Thread_1] Failed to start ConnectionFullVirtualServer[server.traffix.com/127.0.0.1:3868]
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)[ com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:146) ][22/12/2010 11:05:57:511]
ERROR [Main Thread_1] Failed to start Endpoint Stack(server.traffix.com Configured)
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41

Have you tracked down if the phone actually sends the TCP connection to the desktop? I'm feeling that this is a firewall issue that shows itself when the firewall zone changes (public/private/domain).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

HT1595 Apple TV loses complete internet connection every 5 minutes. Tried restarting. Tried unplugging the router, unplugging the modem, and unplugging Apple TV and it still does't work. Get error message 22 saying it can't connect when I put in my pas

It only connects for minutes at a time. I have not changed my router, modem, or placement of my apple tv, modem, or router. It just suddenly stopped working. Any suggestions?

Mine is doing the exact same problem!
Ever since I rented a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from charter communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
It has been connected in the same place for a year and never had an issue.
Nothing has changed..... I have not added a wall to cause interference....
My iPad and iPhone show FULL strength.
Please help!

Can't connect when on campus

I have no problem with my secure wireless network at home. Likewise no issues connecting to a friend's wireless at their home. However, when I take it to school it cannot connect. My macbook pro has no problems at school, nor does my ipod touch. I have to log into their network using my credentials using the notebook or touch, and I get the window asking for my credentials on the ipad, but when I enter them and click OK nothing happens. There's not even a busy icon of any kind. Any ideas would be appreciated.
Cheers,
Jennifer

Hi jmweber,
Welcome to the Apple Discussions.
Ok Lets talk about the home situation and work outwards from there.
You get what is called Public IP from your ISP.
Your modem or a router can then divide this to your computers by creating your Private LAN by issuing IP numbers itself.
NAT (Network Address Translation) is the software that achieves this in the modem or router.
Mostly in domestic devices this really kicks in on the ports above the 1024 threshold.
This tends to mean that Web browsing on port 80 is allowed for everyone (computer) that is connected to the modem.
On-line games plus other apps like Instant Messengers use ports above this threshold and need the ports opened/allowed
On Commercial devices it is possible to do NAT down to the lowest port numbers.
OK Now some ways of opening or allowing the ports above 1024 use NAT more than others due to the way the Addressing info is added to the packets.
Port Forwarding and Port Triggering both rely on NAT (DMZ is an extreme form of Port Forwarding)
Then you have the fact that some manufacturers achieve NAT differently. Sometime you get devices that just don't "Play Nicely", creating the Certain Buddy Problem.
http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
I would use UPnP in devices if they have, where you can.
UPnP (Universal Plug n Play) allows the applications to control the modem ports at not use NAT (Or at least not in a way that effects things in iChat)
7:09 PM Thursday; January 11, 2007

Enterprise Manager console can't connect

Hi,
I have successfully installed an Enterprise Manager and everything works fine except when I installed the Enterprise Manager client on a different machine, it cannot find the enterprise manager server. What did I miss out? Thanks.
Mignonette Viado

Meg,
It's hard to so immediately, since you haven't provided much detail. Are you saying the OMS is on a different machine from the console? What error messages are you receiving?
Roger

FRM-40208 - CAN NOT UPDATE, WHEN RUNNING IN QUERY MODE

Hi all,
I am calling a form in a query mode and when the query is performed in the called form, i am trying to update a field, but i get a error message frm-40208. I have checked my block properties insert_allowed, update_allowed and delete_allowed are set to yes and in the item properties the QUER ONLY is set to NO. can any 1 please help in this matter.
Regards,
Ritesh

how do you do an enter query? is it code somewhere in the pre-form or pre-block automatically using the enter_query?

Can't connect when it says it's connected

Sometimes my computer says it's connected to the internet but it doesn't work. I have to use the repair button constantly and once in a while the same thing happens again. Could someone tell me if there is a solution and how to fix it? Thanks.
Model: WRT54G

Change the Wireless Settings on your router and try to re-connect to your Network...
Open an Internet Explorer browser page on your wired computer(desktop)...In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
Change the channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...Make sure your Wireless Network Connection is set to Obtain IP Address automatically...
If the above fails, you need to upgrade your router's firmware...
Download your router's firmware from here
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...Also do the above Wireless Settings...

Upraded Sql Developer and can't connect to Oracle

I just updated to the Dec 2009 release and now I can't connect
When I click the plus or right click on Connections and select "New Connection" nothing happens.
If I monitor processes in task manager it shows a brief spike in cpus and a small increase in memory usage but nothing happens in the app.
I also noticed that when I close the application it does not leave memory. I have to kill the process via the task manager to get rid of it.
If I go back to version 1.5.1 it works fine. It also leaves memory when terminated
Using winxp r3.

Here is the beginning of the output:
E:\sqldeveloper\sqldeveloper\bin>sqldeveloper
Feb 24, 2010 8:30:27 AM javax.ide.extension.ElementVisitor log
SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.snippet.jar!/META-INF/extension.xml:16: Duplicate declaration of addin
oracle.dbtools.raptor.snippet.SnippetAddin. Previously defined in extension oracle.dbdev.snippet
Feb 24, 2010 8:30:27 AM javax.ide.extension.ElementVisitor log
SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.snippet.jar!/META-INF/extension.xml:17: Duplicate declaration of addin
oracle.dbtools.raptor.snippet.SaveSnippetAddin. Previously defined in extension oracle.dbdev.snippet
Feb 24, 2010 8:30:27 AM javax.ide.extension.ElementVisitor log
SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.jar!/META-INF/extension.xml:16: Duplicate declaration of addi
n oracle.dbtools.migration.workbench.core.MigrationAddin. Previously defined in extension oracle.dbtools.migration
Feb 24, 2010 8:30:27 AM javax.ide.extension.spi.SAXManifestParser$Handler endElement
SEVERE: jar:/file:/E:/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.migration.jar!/META-INF/extension.xml:22: Exception processing manifest
: java.lang.NumberFormatException:For input string: "VIEW_CATEGORY_MENU"
java.lang.NumberFormatException: For input string: "VIEW_CATEGORY_MENU"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.parseInt(Integer.java:497)
at oracle.ide.util.ArrayResourceBundle.handleGetObject(ArrayResourceBundle.java:495)
at java.util.ResourceBundle.getObject(ResourceBundle.java:378)
at java.util.ResourceBundle.getString(ResourceBundle.java:344)
Here is a snip from partway down:
Exception initializing 'oracle.jdevimpl.runner.profile.ProfilerShell' in extension 'Database Developer': oracle.classloader.util.AnnotatedNoClassDefFo
undError:
Missing class: oracle.jdevimpl.runner.profile.ProfArb
Dependent class: oracle.jdevimpl.runner.profile.ProfilerShell
Loader: ide-global:11.1.1.0.0
Code-Source: /E:/sqldeveloper/jdev/extensions/oracle.onlinedb.jar
Configuration: extension jar in E:\sqldeveloper\jdev\extensions
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2180) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.
jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1733) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.ja
r (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at oracle.classloader.PolicyClassLoader.access$000 (PolicyClassLoader.java:143) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.jar (from
system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at oracle.classloader.PolicyClassLoader$LoadClassAction.run (PolicyClassLoader.java:331) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.j
ar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at java.security.AccessController.doPrivileged (Native method) [unknown, by unknown]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1692) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.jar (from
system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1674) [/E:/sqldeveloper/modules/oracle.classloader_11.1.1.jar (from
system property java.class.path), by sun.misc.Launcher$AppClassLoader@24216257]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:320) [jre bootstrap, by jre.bootstrap:1.6.0_10]
at oracle.jdevimpl.runner.profile.ProfilerShell.createRunMenuItem (ProfilerShell.java:193) [/E:/sqldeveloper/jdev/extensions/oracle.onlinedb.j
ar (from extension jar in E:\sqldeveloper\jdev\extensions), by ide-global:11.1.1.0.0]
There are around 500 lines of output none of which tells me what is wrong

Help! Problem when running CF under a non-default service account

I am running ColdFusion 9 with IIS 7 on Windows Server 2008.
The CF application service is running under a domain application account rather than the default local.
The problem is when doing so failed templates keep an active request open indefinately.
Is there a permission setting I might be missing to resolve this issue?
Thanks for any help any one can provide.

Only when running CF under a domain account does the following occur:
If we have a cfm page that connects to a DB via a query tag and for some reason the query has an error,
Then it can be observed that the request to that page remains active as seen in the server monitor under statisitcs / Active Requests, it stays active and never closes although it should close. Over time such open threads add up until the Maximum number of simultaneous template requests limit is reached.
For some reason the request does not close as it should, but if we run the CF under the default system account this does not occur. I can only assume then the domain account has a permission issue. It currently does not have Full Control on the ColdFusion9 directory so I will try that next.

Deluge-console can't connect when running daemon

Similar Messages

Maybe you are looking for