HT1595 Apple TV loses complete internet connection every 5 minutes. Tried restarting. Tried unplugging the router, unplugging the modem, and unplugging Apple TV and it still does't work. Get error message 22 saying it can't connect when I put in my pas
It only connects for minutes at a time. I have not changed my router, modem, or placement of my apple tv, modem, or router. It just suddenly stopped working. Any suggestions?
Mine is doing the exact same problem!
Ever since I rented a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from charter communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
It has been connected in the same place for a year and never had an issue.
Nothing has changed..... I have not added a wall to cause interference....
My iPad and iPhone show FULL strength.
Please help!
Similar Messages
-
My iPhone 4 screen shattered so I had to buy a new one. I backed up my shattered iPhone to iTunes so that I could restore my new one. When I went to restore it, it said that I had an incorrect password although I know it was right. I tried changing the password and it still told me that I had an incorrect password. So now my new phone has lost all its pictures, its music, its apps.... is there anything I can do to get my phone to restore?? PLEASE HELP!
If you can't get the password correct, you CANNOT restore from that backup.
However, if you've been using your phone as recommended by Apple, there should be minimal data loss.
Your iTunes library is on your computer, so you can synch all your apps, music, movies, ringtones, etc, on to your new phone.
Similarly, contacts should be synched to Address Book, Outlook, or a cloud service for you to easily synch back to your new phone.
Pictures taken from your old phone and not synched to your computer are lost, but you would have been synching those photos to your computer frequently as recommended. Other photos that you synch TO your iPhone are still on your computer.
You won't be able to get text messages back. -
THE PHOTOSHOP ICON 64-BIT DOESN'T OPEN ANYMORE THE PROGRAM. I GET A MESSAGE THAT IT CAN NOT BE FOUND IN THE DYNAMIC LIBRARY. WHAT TO DO TO RESTORE IT AND OPEN THE PROGRAM?
Urazurrutia which operating system are you using? I would recommend removing and reinstalling Photoshop to restore the application. What specific version of Photoshop are you facing difficulties with?
-
Getting error message "Only a type can be imported-" when trying to execute jsp page
I get the error: "Only a type can be imported. com.adobe.cq.TestServiceImpl resolves to a package in adobe day cq5
I have created one bundle and installed in felix console. The status of the bundle is also Active. And also it is available in both service and component console.
Here is my TestServiceImpl class in com.adobe.cq bundle
package com.adobe.cq;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.BundleContext;
import org.osgi.service.component.ComponentContext;
import javax.jcr.RepositoryException;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Properties;
//src.component
//declares the class component. This will provide a wrapped ManagedService component in the OSGI container.
//src.service interface="SampleService"
//declares the service we are offering. Actually, the interface attribute is superflous, as by default, all implemented Interfaces are used.
@scr.component
@scr.service interface="testService"
@Component(immediate = true, metatype = true)
@Service
@Properties( {
@Property(name = "service.description", value = "abcd"),
@Property(name = "label", value = "myLabel") })
public class TestServiceImpl implements TestService {
public String sayHello() {
return "Hello World!";
Here is my jsp code
<%@include file="/libs/foundation/global.jsp"%><%
%><%@include file="/apps/mine/includes/functions.jsp"%><%
%><%@ page import="com.adobe.cq.TestServiceImpl,
org.apache.sling.api.SlingHttpServletRequest,
java.util.List"%><%
%><%
SlingHttpServletRequest r = (SlingHttpServletRequest)request;
TestServiceImpl testService = sling.getService(TestServiceImpl.class);
out.println("testService:::"+testService);
%>
<div id="te-nav" style="display:block !important;">
</div>
Is it because of am using annotation in TestServiceImpl class?
Could you please tell me how to fix it?
Regards,
AndersonHi Pawan,
Thanks for your information. It was problem with my pom.xml It started to work after changing my POM.xml
I am not able to get sling service for TestServiceImpl. But I am only able to create TestService which is my interface. I need to get reference for TestServiceImpl class not for TestService interface. Please help me to make it.
i have created TestServiceImpl and TestService class for testing whether my bubdle is crating all the folder structure or not.
But my requirement is like assume class A has some methods like getMenuLink, setMenuLink.. And In class B i am calling some methods in class A and doing some manipulation in createLink method.
Here class B does not have any interface. Not implementing any interface. But I need to get class B refererence via sling.getService.
I know that if we are using maven SCR plugin..we need to have @component, @service. And All java classes are not services. Will it work if I add activate, deactivate method in class B?
Could you please tell me how to proceed next?
Thanks,
Anderson -
How can I get the scroll to work?
Thanks for replying!
It's something else to try! I am quite savy, just frustrated over what should be a simple update!!!!!
I did however try and install iTunes 10.7 on a different computer, which is clean as I ran anitvirus on it this morning, prior to downloading itunessetup.exe and it did the same thing on there too.
Having spent nearly two days trawling the internet for help I am beginning to wonder if it is not a problem with 10.7 itself? Seems like quite a lot of people have the same issues as me....and it can't be the same thing on everyone's computer!
I will try the antivirus on my laptop and go from there!!!
Thanks again for your answer. -
After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?
Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David -
When I try to open iPhoto, I get an error message that says it can't open the application because it may be damaged or incomplete.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year -
when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile. Check you Outlook settings and try again." How do I set up these settings in Outlook 2007
Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/ -
when I updated Facebook 6.7.0, It didyn't complete the updating and my Facebook doesn't work so I deleted it. What can I do now to downgrade it ?
If recovery mode did not work, try DFU mode, but don't use the latest backup to restore from after you have set it up "as new ipod" again.
DFU mode -
My Safari page won't open and I get a message that says "Safari can't find the server"
My Safari won't open and I get a message that says " Safari can't find the server" HELP
Hello Fred5960
If you are having issues with connecting to the internet then check out the articles below to troubleshoot your issue.
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G. -
I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!
What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT -
Opening iphoto I get an error message that says "you can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I wouldn't have a clue as to how to change to a new version of iphoto even if I wanted to.
If you don't have a backup you can resort to give this a try:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT -
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
[Solved] Screen goes black when I run "xrandr" with displayport connec
I am running Arch on a Dell Latitude E6500 with Xorg, nouveau, and Gnome 3. The graphics chipset is identified by lspci as "01:00.0 VGA compatible controller: NVIDIA Corporation G98M [Quadro NVS 160M] (rev a1)". So far, everything has gone swimmingl
-
Error while creating webservice destination in PI 7.1
Hi, I have a Webdynpro application developed with NWDS 7.1 that is consuming web services from PI 7.1 server. I have exposed RFCu2019s from PI 7.1 as web service using transaction se37 and consumed them in my Webdynpro application. I have to deploy t
-
Hi, Can anyone tell me about all the mapping enhancements in PI 7.1? And why do we need to regenarate proxies after upgradation of system from XI or PI 7.0 to PI 7.1?
-
Hi, I put a graphics display in a report. I always got 'Floating exception r25desm (core dumped)'. I am using Reports 2.5 and Graphics 2.5 on Unix. What is the problem? Lu
-
I'm creating an epub with Pages for upload to various sites. When I error check the epub, I get only one error message: "undeclared prefix: ibooks." The file itself works perfectly and looks fantastic when I open it directly from my computer/ipad wit