Demand on sundays

Hi gurus,
I am releasing Forecast from DP to SNP for one product-location.
My SNP planning book is in days.
The forecast is 700, we want to have the total forecast in 6 days (aprox 117 per day) from Monday to Saturday.
In order to get this behavior I'm using a TimeStream with only six days assigned to the Shipping Calendar in the Calendar Tab of the Location Master. I got the 117 per day, but I still have demand on Sundays. How can I avoid this?
Thanks in advanced
-Italo

Hi Italo,
In our project, we have exactly the same problem with yours.
First of all, we are using APO 4.1.
We have monthly time buckets in DP and I am trying to come up with demands on 6 days a week in SNP. There is no problem about the calculation of the daily forecast quantity. But when I try to release the forecasts to SNP, I still observe demands on Sundays which should not be the case.
Do you still remember the solution to your problem? I would appreciate any kind of help on this issue.
Thanks in advance.
~isil

Similar Messages

  • How do you determine what shows are in free video on demand?

    How do you determine what to include in the free on-demand shows?  The Mentalist was always there before but is no longer.  This is especially important for shows like the Mentalist and The Good Wife which come on Sunday nights after sports events.  Even if I set my DVR to record 60 minutes over it doesn't always catch the entire episode.  Would also like to see Person of Interest  there.   And last but not least, you should have a way for people to access netflix or other services from your service.  

    If you go to BROWSE then the FREE folder you will find that everything in there is free viewing. If you go elsewhere and try to watch a paid show, you will get a prompt asking you to purchase. It also shows the amount of the movie before purchase.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Daily demand forecast report

    Hello, can you please help with the report design on Bex, I am a fresher on SAP BI.
    I have a requirement to design Daily demand tracker, report is published weekly, i have to show the fields in report as sunday, monday... soon, overall week total demand? Can you please tell me how we can achieve this?

    Hi Poori,     Once you are in RSPC transac, choose you Chain and double click. Then press F8 and you'll schedule the job each day of the week and hours, normally C priority. Regards.

  • Youview picture too dark - On Demand buffering pro...

    Hi - I'm new to Youview but not to BT Broadband.  So when my Humax box arrived Thursday I had everthing installed and working with 20 minutes.  I have a 3 year old Sony 32 inch Freeview TV (not latest tech but with HDMI) - so was looking forward to HD, on demand and programme recording - all in one package.   So really disappointed with some of the basic problems.   
    i)The standard Freeview output from the Humax box is nowhere near as sharp as the Sony internal Freeview - and the picture is much much darker (from all sources, HD , on Demand).  I have to increase brightness from 60% to 100% to get a similar picture -  
    ii)Despite resetting my home hub checking my broadband speed (6Mb) and all connections (and tunring off my PC and all other devices) every time I try and watch On Demand or Catch up I get significant buffering problems and picture freezing completely.  This is across all th eplayers BBC ITV C5 ect.  
    iii)The Humax box has locked up twice while in buffering mode - and can only be sorted by turning power off.  This has been of an eveing mostly - so the Broadband may be busier - but its either the Humax or the BT BB service.  The same thing has happened in testing this morning. 
    Any ideas- is the picture issue fixable in the Humax box? And can anything be done to sort out the buffering on the various players - as this doesn't seem to be a Broadband service issue?
    Solved!
    Go to Solution.

    Hi Chris - I was using powerline adaptors but tonight moved the BT hub downstairs and directly connected. Still the same buffering problems - even though the BT speed tests are consistently showing download speed of over 6Mb. - I have managed to get this up from 5Mbps by installing an iPlate and some minor wiring changes. The lock-up hasn't happened again though - but the 4oD service keeps telling me I haven't enough bandwidth. I've been testing the same show from Sunday night to keep parameter changes to a minimum. I have actually now connected my PC in the attic office back up using the powerline adapters in reverse - and am still getting download speeds to the PC at over 6Mbps! We don't have other PCs in use and I have turned off this PC when trying to use Youview on demand. So its is either the BT Home hub or broadband service that won't keep streaming at the download speed - or the Humax box and player apps that haven't got enough processing power to accept the data. I have just completed some more tests and at 10pm my speed had dropped to 5 mbps - but surely that should still be Ok to use on demand? Frustrating - and can't see an easy solution as I've deployed all the helpful hints and tips on the various forums.

  • On Demand Players not working

    Hi Forum Readers,
    My Youveiw box is connected directly with ethernet cable and my download speed is 37 so should be ok.
    However Channel Five On Demand just keeps loading and freezing on spining circle and there is no picture and sound. BBC iplayer takes about two minutes to load and there is just picture and no sound. I have tried restarting my hub and powering the box on off etc. But this does not help.
    Does anybody know why this happens or how to fix? Thanks in advance.

    Hi, no help for you I know but I have had the same problem since Sunday and nothing I have done fixes it either, I'm on Infinity 1 and get about 33-35 speed so that's not the problem, I did get to start watching Chicago p.d on FIVE OD once but the spinning circle popped up again and I finally gave up.

  • ABAP code for caliculating the demand variability

    Hi gurus,
    I need to calculate the the demand variability for the requested raw material,
    Demand Variability for raw materials is calculated by taking the standard deviation of 52 data points, each point representing the total consumption in a week.
    The raw consumption data contains negative figures on many days, resulting from inventory adjustment transactions.  Aggregate consumption to a weekly bucket to keep variability from being artificially inflated by any negative figures from adjustments due to physicals, poor practices, or cycle counts.
    Calculation
    Calculate the consumption for every week based on MSEG-MENGE where MKPF-BUDAT falls within the week bucket from Sunday till Saturday. This is the value Xn.
    SUM all 52 Xn values for every week. This is Y.
    Divide the Y/52 = Z
    Calculate for that year the standard deviation
    SQRT (((Xn-Z)2)/n)
    Can you any one give the code for this condition.
    Thanks in advance.

    any help please...

  • On demand not updating

    there are no new episodes for ANY tv show on any network in the On Demand section since SUNDAY oct 11.  
    anyone have any idea what to do to fix? who to call?

    Unfortunately the network shows that are available on demand are controlled by the networks, not fios.  There is nothing any Verizon agent could do to expedite the process, it is all up to the networks.  Sorry for the inconvenience
    Frank
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • No Internet, Phone, or On-Demand during the day since Thursday (Oswego, IL)

    On Thursday, there was a complete outage in the area (I live in Oswego).  Cable came back up in the afternoon but my Internet, Phone, and On-Demand didn't come back up until around 9:30pm. On Friday, Internet, Phone, and On-Demand went out around 7am. They didn't come back up until 6:30pm.On Saturday, the same servies went out at 7:30am and didn't come back up until 6:45pm.Yesterday, the same services went out at 7:15am and didn't come back up until almost 10pm. I called right away Thursday afternoon and they told me that the first available appointment was on Monday.  Since that was so far away, they would "escalate" my ticket and someone (dispatch I believe) would call me on Friday to get someone out earlier.  Of course, when I left for work on Friday, all my services were working and they cancelled my appointment when I told them that. Friday, when I got home from work, all 3 services were out again and I called again.  The first available appointment was now on Tuesday so they scheduled that and then "escalated" my ticket again and told me that someone would call me Friday evening or Saturday morning. By Saturday afternoon nobody had called so I called back.  This time I was told that dispatch can take up to 24-48 hours to call back and that basically, I'd have to wait for their call.  By Sunday afternoon, I still hadn't received a call so I called again.  My ticket was now "escalated" again and I was promised a call back after 3pm.  I asked the girl on the phone what I should do when nobody calls and she absolutely, positively, told me that someone would call me back on Sunday after 3pm. Of course, nobody called. What on Earth is going on in Oswego?  I can't be the only person having these issues?  I find it very hard to believe that my equipment (or anything in my house) may be causing this as I have seperate modems for phone and Internet and On-Demand is going out on all 3 boxes at exactly the same time (cable seems to be fine) and then everything comes back at exactly the same time.  It's not even an intermittent issue.  It goes out in the morning, and comes back on at night.  All of this started happening after the complete outage on Thursday.

    Just a quick update.  All three services went out again this morning between 7am - 7:30am.

  • On Demand has the hiccups !!!!

    Everything was working fine until Saturday. Now if I try to watch anything on Demand/Replay, the picture and sound sticks, its like it has bad hiccups. On Sunday I phoned the BT vision technical support, they said my broadband speed was fine, to swap the black power boxes over, unplug and replug the vision box and reboot the home hub. I did all this and its still got the hiccups. I was also told to leave it on standby so that it can update. It has been on standby since Sunday. I don't like leaving things on standby. Any suggestions to how I can get rid of the hiccups please ?

    Was happening to me Saturday night also BUT only on one episode of Undercovers, everything else was ok. Tried to watch the same programme on Sunday evening and had no problems with it. Try it again, it may just have been a glitch in the system. Hope you get it sorted. 

  • Vision on demand stops working from 7.45 - 11.00 e...

    Hi , Can the powerline adapters cause on demand issues at the same time every night?
     Since Sunday all on demand and BBCI player (through BT Vision) content stutters and stops from about 19.45 - 23.00ish
    It works fine at any other time and bbci player through the ps3 works fine. I have not had this issue before and we would be watching on demand, streaming on the pc and surfing on the tablet all at the same time in the evening with no problems.
    I have had vision since feb 2010 same set up no new electrical devices etc .
    My vision box is the black box  - not updated to version 2
    Platform/OS Version WinCE/5.0.1400
    My Hub is version 2 (The black one with a phone on the front)
    I have restarted the hub, power cycled the hub, done a hard reset on the vision box.
    I spoke to BT last night and they are sending me new adapters (I had the old white ones) they said that the problem was caused by the adapters and that I should of had mine replaced anyway because they had been recalled.
    It was only tonight that it clicked that it was happening at peak times, my speedtests are fine the agent I spoke to last night said my speed was fine at their end.
    I took a speedtest before I called again this evening 
    1. Best Effort Test: • -provides background information.
    Download Sp..d
    8.99 Mbps
    I
    0 Mbps 21 Mbps
    Max Achievable Speed
    Download spe.dachi.ved during the test was - 8.99 Mbps
    For your connection, the acceptable range of speeds is 4 Mbps-21 Mbps.
    IP Profile for your line is- 11.42 Mbps
    2. Upstream Test: • -provides background information.
    Upload Speed
    0.72 Mbps
    0.83 Mbps
    0Mbps
    Max Achievable Speed
    Upload speed •ch.v•d during th. test was - 0.72Mbps
    Additional Information:
    Upstream Rate IP profile on your line is - 0.83 Mbps
    We ware unable to identify any performance problem vath your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you ware accessing responding slowly.
    If you continue to encounter a problem th a specific server, please contact the administrator of that server in the first instance.
    We have identified that you have additional services enabled on you broadband line, please click continue to run advanced service tests.
    Test Results
    I. video Service Quality Test: ö-provides background information.
    Video Service Quality Test Passed
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Please visit the fQ if you are unable to understand the test results.
    As you can see I am getting nearly 9 at peak times  more often 10/11ish ( vision also worked fine when my line was a max of 8 until the recent "upgrade").
    The video Service quality test also passed.
    I asked if the QOS (?)was OK on my line this evening and I was told yes -as in October I had experienced V04 errors due to the upgrade and a damaged wire causing issues with my BB which had caused the portion of line saved for vision to be stuck too low (BTs words) this was apparently fixed. I asked if this was ok and could it be connected this evening and was told no everything is fine.
    I'm a bit confused because he started going on about my box  could be deterating and how the new update would fix it but then said the hub and box should last for years. also he said it was the adapters but then mentioned busy times?
    Sorry for the long post I am just worrying that I am going to have weeks of different agents saying different things and everytime I ring starting from the begining - I have had similar issues with other problems before and have always found the community here ( and the mods) the most helpful.
    So could it be the adapters or is it something else?
    (also I'm really worried that this will be used as an excuse to move me on to youview [ I'm not in a infinity enabled area] and if i put my postcode into the checker it says I can't have vision -I don't want to lose ESPN before i have to)

    It gets worse at about 20.00 it was still alright so I ran the speed tester and got this:
    The test has successfully completed
    Test Results
    1. Best Effort Test: -provides background information.
    Download Speed
    10.25 Mbps
    0Mbps 21Mbps
    Max Achievable Speed
    Download sp.eedachieved during the test was - 10.25 Mbps
    For your connection, the acceptabl, range of spe.ds is 4 Mbps-21 Mbps.
    LP Profile, for your line s 9.4 Mbp.
    2. Upstream Test: -provides background information.
    Upload Speed
    0.74 Mbps
    0 Mbps 0.83 Mbps
    Max Achievable Speed
    Upload speedi achieved during the test was - 0.74Mbps
    Addthonal Information:
    Upstream Rate IP profile on your line is - 0.83 Mbps
    We ware unable to identify any performance problem rmth your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    We have identified that you have additional services enabled on you broadband line, please click continue to run advanced service tests.
    My IP Profile has dropped from 11.5. when I pressed continue I got this

  • Demand management split the requirements

    Hi
    I wonder if anybody knows how to make a daily split for the requirements in demand management.
    I have made it but the split is made only for the 5 workdays (monday to friday) but i need to be done in weekdays (monday to sunday).
    I've got the restriction of not changing the calendar of the plant because it will affect the others modules of SAP.
    Wait for your answer
    Please
    The points will be waiting
    Taka care
    Francisco O.

    Hi,
    Even if you split the reqirement in demand managmant system will not plan the planned order on holiday,
    To split the PIR qty
    1. goto schedule lines and select the line
    2. goto edit mode choose split per online
    3. popup will appear
    4. enter the period indicator and start and end date of the requirements period
    5. enter the qty to be split and enter the period indicator for split enter
    6. PIR qty will be split daily
    7. daily qty =Total reqmts qty / no of days
    Can you try order splitting (FS) and in the takht time enter the number of in house production days (1). In the rounding value assign the quantity for the daily lot size.
    Reagrds
    R.Brahmankar

  • Re: On Demand error cl-0x000f

    Got an Error message : err-0x000f. Called into the customer service line.... What a joke, tried to tell me to just reset the DVD by unplugging this.<br>What a joke now, can't get time on demand. Gave me a ticket number and have to wait for a service call. Sunday, 5 days away. Comcast is a joke and I truly need to cancel this god awful Always something.

    I feel your pain.  Dealing with Comcast will crush your faith in the longterm viability of the American economy, if not your faith in humanity itself.  You start to believe that it really is possible that at some point in the near future apes will outsmart and enslave us.  I get cl-0x000f every couple months.  As you indicate, the "unplug your box to reset it" instruction is not sufficient to fix the problem.  (But see my suggestion #2 beow. )  Also of little value is having Comcast send a reset signal to your box.  That never works.  The most hopeful thing I ever got from phone support was an acknowledgement that they had detected a problem on the network in my neighborhood which could impact OnDemand.  They said they would send a technician to my neighborhood to fix the problem, then call me back when it was fixed.  I never got a phone call back and two weeks later I was still getting the error code.  The point is, phone support is of little value except for paying your bill.  They are good at taking money but not at providing service.  For service, you must take matters into your own hands.  Here are the two things that I have found will fix error cl-0x000f:  (1)  Get a new box.  Take the cable box to a Comcast office and swap it for a new one.  It's free and no one has ever questioned me about why I am constantly picking up new boxes.  Let's face it, no one knows how bad Comcast technology is better than their own employees.  They happitly give me a new box.  I take it home and activate it.  OnDemand will then work for a couple more months before the dreaded cl-0x000f once again infects my system.  (2) Disconnect your modem before resetting the box.  This has only worked for me twice, but it is worth a shot.  If you have an Xfinity modem/router, as I do, that box is serving as a hotspot for your neighborhood.  Besides providing wifi in your home, a separate (supposedly) wifi signal is broadcast to your neighborhood.  The reliability of OnDemand seemed to decline below its already abysmal level once the hotspot technology was implemented.   So before driving the box back to the Comcast office, I try unplugging the modem/router before unplugging the cable box.  This doesn't always work.  But on two occasions it has.  Maybe it was just coincidence.  But reseting has never worked for me unless I first unplug the modem/router.   If it does work, I can then reconnect the router and the internet comes back online without disturbing OnDemand.  If it doesn't work, I take the box to the Comcast office and switch it out.  The important thing is to not stress out about it.  There are people in this world who don't have enuogh food to eat each day, or who live in fear that their house will be blown to pieces by a bomb as they sleep in the night.  We are fortunate enough to live in a country with adequate food and tremendous security systems.  The fact that our cable TV company can't provide reliable OnDemand may make us question American technology, but it is a miniscule inconvenience compared to what most of the world has to deal with.

  • Pourquoi me demande t on mon mot de passe sans arrêt

    Bonjour,
    depuis quelques temps, ok très longtemps, on nous demandes nos mots de passe sans arrêt. Tantôt c'est trousseau, tantôt c'est syncdefault, d'autre fois c'est mail ou encore Iphoto... C'est assez rébarbatif, surtout quand on a laissé le mac tout seul un moment et qu'on y retourne, il faut parfois s'aquitter de rentrer le même mot de passe dans 4 voir 5 fenêtres qui le réclament.
    Alors oui on a 1 mot de passe d'un compte mail qui diffère du général mais pas possible de le changer auprés du compte mail.
    On a contacté Expresslane mais on été pris de haut genre "c'est normal" mais moi je pense pas car Apple est pas du genre à faire des systemes abrutis qui demandent sans arrêt la même chose sans raison !
    Quelqu'un a t il eu le même souci, et sait comment le résoudre ?
    Merci d'avance !

    Hi
    good evening
    I have a concern
    When I want to connect on "messages" it prompted systematically (m) opens a window AOL Instant Messenger and asks me to enter my password to the account in question. OK so far
    but when j between my password, it tells me the username or the password is not correct, the coup not I connect with any account "hotmail"
    If someone had a solution ...
    Thank you for advance
    Manu
    Messages will connect to any Screen Name valid with AIM listed in the System Preferences > Mail, Contacts and Calendars and enabled for Messages  (Or listed in the Messages > Preferences > Accounts)
    Same for Jabber IDs (Includes Facebook iDs and GoogleMail IDs)
    It will not do MSN/Hotmail/Live IDs without a bit of work
    http://allforces.com/2005/05/06/ichat-to-msn-through-jabber/
    Do you have an Apple ID ending in @mac.com or @me.com as these are Valid AIM names ?
    Or do you have an AIM Screen Name already ?
    Les messages seront connecter à n'importe quel nom d'écran valide avec AIM énumérés dans les Préférences Système> Mail, Contacts et Calendriers et activé pour les messages (ou figurant dans les messages> Préférences> Comptes)
    Idem pour Jabber ID (Comprend Facebook iD et GoogleMail ID)
    Il ne faut pas MSN / Hotmail / Live ID sans un peu de travail
    http://allforces.com/2005/05/06/ichat-to-msn-through-jabber/
    Avez-vous un Apple ID [email protected] se terminant [email protected] que ce sont des noms but valable?
    Ou avez-vous un nom de AIM déjà?
    8:53 PM      Sunday; August 12, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Calendar days to start from Monday to Sunday

    Guys,
    On the Calendar functionality, when viewing the appointments by week then is it possible to have the day to start from Monday to Sunday?
    Currently, it starts at Sunday to Saturday.

    At this time the calendar is set for Sunday to Saturday. I would recommend submitting a enhancement request to On Demand customer care.

  • J'ai tapé le mauvais mot de paasse et mon telephone me dit de me connecter a i tune mais quand j le fais ,i tune me demande de taper mon mot de passe dans mon telephone pour le reconnaitre

    Mon iphone est desactivé et il y a un message que je dois me connecter a i tune.mais quand je me connecte,itude me demande de retaper mon mot de passe dans mon telephone mais j ai oublié mon mot de passe.

    Hi
    good evening
    I have a concern
    When I want to connect on "messages" it prompted systematically (m) opens a window AOL Instant Messenger and asks me to enter my password to the account in question. OK so far
    but when j between my password, it tells me the username or the password is not correct, the coup not I connect with any account "hotmail"
    If someone had a solution ...
    Thank you for advance
    Manu
    Messages will connect to any Screen Name valid with AIM listed in the System Preferences > Mail, Contacts and Calendars and enabled for Messages  (Or listed in the Messages > Preferences > Accounts)
    Same for Jabber IDs (Includes Facebook iDs and GoogleMail IDs)
    It will not do MSN/Hotmail/Live IDs without a bit of work
    http://allforces.com/2005/05/06/ichat-to-msn-through-jabber/
    Do you have an Apple ID ending in @mac.com or @me.com as these are Valid AIM names ?
    Or do you have an AIM Screen Name already ?
    Les messages seront connecter à n'importe quel nom d'écran valide avec AIM énumérés dans les Préférences Système> Mail, Contacts et Calendriers et activé pour les messages (ou figurant dans les messages> Préférences> Comptes)
    Idem pour Jabber ID (Comprend Facebook iD et GoogleMail ID)
    Il ne faut pas MSN / Hotmail / Live ID sans un peu de travail
    http://allforces.com/2005/05/06/ichat-to-msn-through-jabber/
    Avez-vous un Apple ID [email protected] se terminant [email protected] que ce sont des noms but valable?
    Ou avez-vous un nom de AIM déjà?
    8:53 PM      Sunday; August 12, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for