Demo unit ipad 2 cannot reset to factory setting?

i have a few problem with my ipad 2. i bought a demo unit and i can't restore it to the factory setting since there was no restore button. i also cannot delete unwanted application on it. please help me.

See Restoring your iOS Device Here > http://support.apple.com/kb/HT1414

Similar Messages

I baught second hand iMac and having trouble to reset to factory setting Help pls

I baught second hand iMac and having trouble to reset to factory setting Help pls

The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT1937 Can I get my secondhand iPhone 4 reset to factory setting?

Can I get my secondhand iPhone 4 reset to factory setting? It is on uk carrier 3 and I would like to use it on the Tmobile or Virgin carriers and give it to my daughter for her birthday on 16-02-

Resetting an iPhone to factory settigns isn't an issue, you can easily do that by connecting it to iTunes and hitting the "Restore" button. If the iPhone is currently locked to the UK carrier Three, you won't be able to use it with a SIM card from any other carrier without getting the UK carrier to authorize an unlock. I believe that the UK carriers all offer this to their customers but it might cost you a fee. If you are not a customer of Three, you might have more problems getting an unlock form them though.

How do you download the reset/reload factory setting on the apple website?

My ipod nano has had a flashing apple icon every time i try to turn it on. i have read another post that explains how to fix this problem but i do not understand one of the steps that says to download the reset/reload factory setting.

i do not understand one of the steps that says to download the reset/reload factory setting
Here's a step-by-step for Restoring the iPod back to factory settings:
http://docs.info.apple.com/article.html?artnum=60983

TS4006 I need to erase my ipad and reset to factory settings in order to sell it but it won't do it

I need to erase my ipad and reset to factory settings in order to sell it but it won't allow me to do it and it keeps coming up with a passcode that it won't take either how do I get around this ?

What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT1414 i have iphone 4s with ios 6 installed, if i want to reset to factory setting which ios 6 is not signed by apple anymore , am is still able to do it?

i have iphone 4s with ios 6 installed, if i want to reset to factory setting which ios 6 is not signed by apple anymore , am is still able to do it?
i have problem with the software , my sound sometimes just turn mute and back again after few minutes. when i recieve phone call phone ring like no problem at all, but when i open musics i can play song, no tool bar volume below the play button. message and all notification went mute just vibrate.
i want to restore to factory setting , i currently using 6.0.1 and i still want to use this ios since 7.1.1 have a lot of bugs.
do i still can restore to factory setiing i currently use. ?
please show me how to do it if still posible.
thx so much

No, restoring the phone will install the latest iOS version.
If you go to Settings > General > Reset > Erase All Content and Settings, the phone will revert to its fresh out of the box state, but iOS will not be reloaded - you'll still have iOS 6. See if the problem is fixed, and if it is, load your data back manually.

HT1339 my daughter put a restriction passcode in now i cannot reset to factory settings

my daughter put a restriction passcode in now i cannot reset to factory settings

Why can't you restore it to factory settings? What happens when you try? Any error messages?
B-rock

PAP2T - NA cannot reset to factory default

i bought PAP2T-NA adapter from amazon and I want to upgrade the firmware. I am trying to access the admin page but it keeps asking me for the password. I do not know. I tried entering **** and 73738# also but it keeps saying enter the password and hit # sign.
i cannot reset this device to factory default. can some one help or i am doing something wrong?
I bought from amazon unlocked version.
thank you

Re: PAP2T - NA cannot reset to factory default
(Mod note: Removed non-public information. Thank you.)
Message Edited by Vince_02 on 01-29-2010 10:57 AM

I get errors trying to set my IPAD back to the factory setting. error: backup session failed. If I try to sync I get 3 more errors - 1) the IPAD cannot be synced, an internal error occurred. 2) required file not found. 3) folder specified instead of fi

Any help with errors setting IPAD back to factory setting? I received this error when trying to back up - backup session failed. Has any one had the following errors when trying to sync to computer?
1) the IPAD cannot be synced, an internal error occurred. 2) required file not found. 3) a folder specified instead of file.
Any help appreciated

Type "13019" into the search bar at the top of this page by "Support" and read the resulting help articles.

Cannot get iPad to reset to factory settings Wrong password tried holding down home and sleep wake button Anyone help

Cannot get ipad2 to reset Tried holding down wake sleep and home buttons Still will not reset

Holding the sleep and wake buttons just does a 'soft reset' i.e. a reboot, not a reset to factory defaults. If you've forgotten the passcode for the iPad then you will need to do the reset via your computer's iTunes (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

Problem since reset to factory setting

last day I was reset my mac to factory setting, bur after restart instruction I lost information coz display just viewed "?".
what must can i do to continiu the action ?
after internet connected, display viewed "apple.com/support-2002F",
what it mean ?

This article gives you instructions on reinstalling Lion. Note that all user data will be erased. Have a backup on hand.
http://support.apple.com/kb/PH4439
Ciao.

Satellite L650 - cannot restart to factory setting pressing '0'

I press down the 'zero key', then, while pressing, turn on my L650. I want to restore it to factory setting. It starts to make a noise (3 to 5min). When I release the '0' key, windows starts and Desktp appears as always!
Ive tried several times and it does nothing! I also have tried with F8, but it is the same...
Why I cannot acces to the restore menu???!!!
Thanks!

Hi
If you have an Toshiba European notebook model, you have to follow this steps:
Press F8 -> choose Repair my Computer > HDD recovery
Then follow the steps on the screen
The 0 button works for Toshiba Australian models and i guess for US notebook models

Problem.with reinstall of Mac OS X Lion after resetting to factory setting says temp unavailable

Reset to factory. Setting now I can reinstall OS X lion

Yes, if you download Mavericks on another computer you can then use your ID with this one. Better yet, Mavericks is free so it won't cost you anything.

I have a Mac Mini late 2012 version and i am trying to reset to factory setting.

Hello, I had a bought a Mac Mini late 2012 version a couple months ago, and after i tried to install "pro tool" on my Mac, and FAILED. my Garage band wouldn't open anymore. it only tells me "garage band quit unexpectedly" when i open it. I tried uninstalled it and reinstall it again, but it still won't work.
So now, I want to jus5 restore the whole Mac mini to factory setting and erase everything in it.
I had read some of the threads in the community, and the Mac mini late 2012 doesn't come with an OS disk.
Therefore, is there anyone can tell me how i would be able to rest the Mac Mini later 2012 version back to factory setting and erase everything in it?
Thank you very much!
PS: i am not using Apple keyboard.

See:
http://support.apple.com/kb/HT4718

Reinstall Window 8.1 / reset to factory setting

Greetings,
i'm trying to reinstalled back my laptop to factory setting. i'm using window 8.1. i've just bought the laptop recently at Thunder Match at Mines. All the setup has been done by their sales person.
the problem start when i want to make recovery refresh to the laptop... the recovery partition seems empty and not working. How can i settle this problem, can i get back the preinstalled window 8.1 in this machine?
please advise.
thank you

Hi,
If Recovery Partition of the Notebook is not working then please contact HP Technical Support to get the Windows 8.1 Recovery Disc, and they should be able to assist you with that.
Anyways, also check the below link:
Performing an HP system recovery (Windows 8)
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I am an HP Employee but I speak for myself and not for HP or Others.****
I work for HP.

Demo unit ipad 2 cannot reset to factory setting?

Similar Messages

Maybe you are looking for