Deployed in 9iAS , But giving WebService Error

Hi,
Encountered following error while deploying .ear in Oracle 9i Enterprise Manager on WINDOWS 2000 Server. The application got deployed but after deployment it is giving error message stating that error occurred while publishing the web services. Any reason why it is coming?.
The message it is displaying is :
The application was deployed successfully, but an error occurred while publishing the web services. You can attempt to re-publish the services from the deployed application. The J2EE application(.ear) file needs to be specified and read before the deployed process can proceed. Go back to the Deploy Application Introduction page.
Thanks & Regards
Madhu V

ok below is the code
CURSOR RESALE_BROKERAGE IS SELECT am_brokerCd resalebrcd,'' resalesbrcd,NVL(SUM(AM_AMT),0) RESALE_AMT,COUNT(AM_RESALENO) TOTCNT,NVL(SUM(AM_UNITSAPPLD),0) RESALE_UNITS
FROMRNT_RESALE_MASTER
WHERE am_brokercd is not null AND AM_PROCTAG='Y' AND
(to_date(to_char(AM_PROCDT,'DD/MON/YYYY')) BETWEEN
to_date(to_char(:rnt_broker_date.fromdt,'DD/MON/YYYY')) AND
to_date(to_char(:rnt_broker_date.todate,'DD/MON/YYYY')))
GROUP BY am_brokerCd
UNION
SELECT AM_BROKERCD resalebrcd,     
am_subbrokercd resalesbrcd,
NVL(SUM(AM_AMT),0) RESALE_AMT,COUNT(AM_RESALENO) TOTCNT,
NVL(SUM(AM_UNITSAPPLD),0) RESALE_UNITS
FROM RNT_RESALE_MASTER
WHERE     am_brokercd is not null AND AM_PROCTAG='Y' AND AM_BROKERCD = 'ARN-9760' AND (to_date(to_charAM_PROCDT,'DD/MON/YYYY')) BETWEEN
to_date(to_char(:rnt_broker_date.fromdt,'DD/MON/YYYY')) AND
to_date(to_char(:rnt_broker_date.todate,'DD/MON/YYYY')))
GROUP BY AM_BROKERCD,am_subbrokercd;
Asha

Similar Messages

  • Looks like deployment completed successfully, but there are errors in BDD/smsts Log

    I am new to MDT and getting ready start using the tool for deployments, but I am concerned about some errors in the log files.  The systems we have deployed appear fine, but I want to ask if I should be concerned about these errors.  We do not
    migrate and user data and are using MDT to upgrade older equipment to windows 8.  When the deployment has been completed, it reports 0 errors and 0 warnings.
    Thank you for any help!
    Here is the error that is in the smsts.log that appears multiple times Error - (__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002)
    Parsing task sequence to get schema version
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)
    Task sequence version 3.00 TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Task sequence schema version is 3.00 TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Current supported schema version is 3.10 and 3.00
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)
    Processing get action table request TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Got root node now getting list of all child elements
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)
    There are 7 first level steps or groups TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Processing group TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Parsing group node: Initialization TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Description: Initialize the TS environment TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    ContinueOnError: false TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Disable: false TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    (__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\nts_sms_fre\SMS\common\inc\ccmxml.h,566)
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)
    another error
    DefaultVarlist found TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Variable name: ImageSize TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Variable name: ImageProcessorSpeed TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Variable name: ImageMemory TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Variable name: VerifyOS TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Action command line: cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)
    Adding instruction at 4 TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Parsing step node: Check BIOS TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    Description: TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    ContinueOnError: false TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    SuccessCodeList: 0 3010 TSManager
    1/9/2015 12:49:10 PM 540 (0x021C)
    (__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\nts_sms_fre\SMS\common\inc\ccmxml.h,566)
    TSManager 1/9/2015 12:49:10 PM
    540 (0x021C)

    Error 80070002 is Windows can not find the file specified. Look at your BDD.log at the time stamp SMSTS.log shows this error.  I highly doubt there is anything wrong though. Some of the stuff you see in SMSTS.log can be along the lines of hey does
    blah exist? If blah doesn't exist then do some stuff else do some other stuff.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • MDG Material BS_MAT_OVP_03 application is fine in development but giving runtime errors when moved to quality

    Dear Experts,
    We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
    "ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
    we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
    Regards
    Sukumar

    Hi Sukumar,
    It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
    Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
    Thanks
    Praveen

  • Query running ok in SQL but giving error in form trigger

    Hi guys
    here is the query
    SELECT NVL(BGM_PERAMT,0) INTO PERAMT FROM BROKERAGE_MASTER
    WHERE     BGM_BROKERAGETYPE = 'BR01' AND BGM_PERAMT <> 0
    The above query working fine in SQL but giving following error in when_button_pressed trigger
    [In a host language program, all records have been fetched. The return code from the fetch was +4 indicating that all records have been returned from the SQL query. ]
    please give me the solution for this problem.
    It is very urgent
    regards
    asha

    ok below is the code
    CURSOR RESALE_BROKERAGE IS SELECT am_brokerCd resalebrcd,'' resalesbrcd,NVL(SUM(AM_AMT),0) RESALE_AMT,COUNT(AM_RESALENO) TOTCNT,NVL(SUM(AM_UNITSAPPLD),0) RESALE_UNITS
    FROMRNT_RESALE_MASTER
    WHERE am_brokercd is not null AND AM_PROCTAG='Y' AND
    (to_date(to_char(AM_PROCDT,'DD/MON/YYYY')) BETWEEN
    to_date(to_char(:rnt_broker_date.fromdt,'DD/MON/YYYY')) AND
    to_date(to_char(:rnt_broker_date.todate,'DD/MON/YYYY')))
    GROUP BY am_brokerCd
    UNION
    SELECT AM_BROKERCD resalebrcd,     
    am_subbrokercd resalesbrcd,
    NVL(SUM(AM_AMT),0) RESALE_AMT,COUNT(AM_RESALENO) TOTCNT,
    NVL(SUM(AM_UNITSAPPLD),0) RESALE_UNITS
    FROM RNT_RESALE_MASTER
    WHERE     am_brokercd is not null AND AM_PROCTAG='Y' AND AM_BROKERCD = 'ARN-9760' AND (to_date(to_charAM_PROCDT,'DD/MON/YYYY')) BETWEEN
    to_date(to_char(:rnt_broker_date.fromdt,'DD/MON/YYYY')) AND
    to_date(to_char(:rnt_broker_date.todate,'DD/MON/YYYY')))
    GROUP BY AM_BROKERCD,am_subbrokercd;
    Asha

  • Getting Custom code error while deploying the report but in local(BI studio) when i preview its working,

    Hi,
    I Haven't used Vb.net, as I work on C#, But in SSRS it supports only VB.net code as custom coding, so i coded in c# and converted to VB.net from online converter. The code i got from online converter is working fine in local i.e when i preview in BI studio,
    but when i try to deploy the same i'm getting error 
    Error 3
    There is an error on line 12 of custom code: [BC30201] Expression expected.
    0 0
    Below is the code:
    ' -- Author        : Jai Anand
    ' -- Date            : 06-05-2014
    ' -- Discription : To split the given string of numbers and Assign the days for it,
    ' --                        example: if integer 1 - (Su) --> Sunday, 2 - (Mo) --> Monday
    public Function FindPlanDays(plandate As String) As String
    Dim planarray As String() = New String() {}
    Dim days As String = ""
    planarray = plandate.Split(","C)
    Dim i As Integer = 0
    While i < planarray.Length 
    Dim day As String = If(planarray(i) = "1", "Su,", If(planarray(i) = "2", "Mo,", 
     If(planarray(i) = "3", "Tu,", If(planarray(i) = "4", "We,", If(planarray(i) = "5", "Th,", If(planarray(i)="6","Fr,", If(planarray(i) = "7", "Sa,", String.Empty)))))))
    days = days & day
    i += 1
    End While
    days = If(days <> String.Empty, " (" + days.TrimEnd(","C) + ")", days)
    Return days
    End Function
    Kindly check the code, if any issue is there,give me the solution..Thank you

    Hi,
    I found the solution and the report is deployed . The issue was with If and we should suffix with space and underscore( _) at the end of the line break and continues in next line (i.e if the statement continues in next line).
    iif has always been available in VB, even in VB6.
    Dim day As String = Iif(planarray(i) = "1", "Su,","Mon")
    It is not a true operator, as such, but a function in the Microsoft.VisualBasic namespace.
    so the modified code which worked fine to deploy
    ' -- Author        : Jai Anand
    ' -- Date            : 06-05-2014
    ' -- Discription : To split the given string of numbers and Assign the days for it,
    ' --                        example: if integer 1 - (Su) --> Sunday, 2 - (Mo) --> Monday
    public Function FindPlanDays(plandate As String) As String
    Dim planarray As String() = New String() {}
    Dim days As String = ""
    planarray = plandate.Split(","C)
    Dim i As Integer = 0
    While i < planarray.Length 
    Dim day As String = Iif(planarray(i) = "1", "Su," ,Iif(planarray(i) = "2", "Mo,", _  
     Iif(planarray(i) = "3", "Tu,", Iif(planarray(i) = "4", "We,", Iif(planarray(i) = "5", "Th,", _
     Iif(planarray(i) ="6","Fr,", Iif(planarray(i) = "7", "Sa,", String.Empty)))))))
    days = days & day
    i += 1
    End While
    days = Iif(days <> String.Empty, " (" + days.TrimEnd(","C) + ")", days)
    Return days
    End Function

  • I installed itunes 10.5 in my PC to sync with my ipod touch 4G but it's giving me error that itunes could not connect to itnues store.Make sure network connection is active and try again...I'm connected to internet though, please help!

    I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194, i cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194

    i cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194, i cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194

    Did you try the actions specified here:
    - iTunes: Specific update-and-restore error messages and advanced troubleshooting
    - 3194-How do I reset the hosts file back to the default?
    - http://support.apple.com/kb/ts1275
    Saying "i tried everything " provides us with no information as to what you arelady tried?

  • I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Last week i purchased Apple TV but , when i am trying to loging by the apple id is giving me error "your password is not correct" but when i try to login in my Pc is working fine

    last week i purchased Apple TV but , when i am trying to loging by the apple id is giving me error "your password is not correct" but when i try to login in my Pc is working fine

    Thanks for the flag J.K. - they contaced me and solved my problem.  On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

  • GB01 FM  JV_GB01_DIRECT_INPUT...Document Created but giving error message

    Hi All,
          I am trying to POST S/L Documnet using the FM  JV_GB01_DIRECT_INPUT.
          Function module returns the Document Number.But when When I try to view this using Tcode GD23..Its giving an error 'Noline items were selected'.
    I am not sure exactly which went wrong.
    I filled  T_GLU1 with 2 line items.
    Could someone help me on this issue??
    Thanks in Advance....

    ..

  • Indesign cc files not saving but not giving an error message

    Indesign CC files not saving but not giving an error message
    I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
    Can anybody suggest a solution?
    Thanks
    Janine

    Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
    Mylenium

  • TS3694 im trying to reset my iphone 4 att. but it keeps giving me error 3194. i dont know the restriction ow

    im trying to reset my iphone 4 att. but it keeps giving me error 3194. i dont know the restriction pw
    it dose not let me update software

    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Installing Bundle#1 in peoplesoft but it giving me error

    Hi,
    I want to install and ofigure SAIP, i have followed peoplebook for this purpose. It is written there that install Campus Solutions 9.0 Bundle #9 (or the multilingual version) and HCM 9.0 Maintenance Pack #4. For this i have downloaded all the required Bundles into my system. I ran change assistant and given all the files to it, it runs and after a little time giving me error that:
    Invalid command in boot strap mode
    Ended: Sat Feb 18 18:03:30 2012
    Unsuccessful completion
    i am unable to find such error resolutions on forums and over the other useful sites.
    Please help me to out of this, because i have dead line which is very near and i have to implement SAIP.
    Regards
    Zubair Ali

    Zubair wrote:
    HCM 9.0 Maintenance Pack #4.
    Campus Solutions 9.0 Bundles #7 and #8.
    Apply Incident Resolution 768436.
    My question is what will be the sequece of all Bndle and MPs? SHoud i install Mps first and then bundle? or i go with Bundles first and then Mps?The MP5 has been released and if I'm not wrong the MP5 cumulative includes all the bundles up to bundle #7. So, why not go for that MP5 then apply bundle #8 ?
    Of course, you should check the prerequisites if any.
    Nicolas.

  • DC not deploying in QA but working fine in DEV

    Hi All,
    I have created one activity in DEV  for one  view from one DC then I made some changes and checked in (NWDI), activated and released.
    Later trying to deploy it into QA server it is not deploying, giving error like :
    (Activity name)staging deployment partially completed due to some DC deployment is finished with error.
    but we haven't touched this DC.
    earlier we havn't faced this problem, we have upgraded QA SP 9 to SP11.
    If we run the application from QA getting error like NoClassDefFound error.
    Even we are trying to deploy another DC which we are getting error at deploy time it self also not deploying.
    what might be the problem? Any ideas from experts?
    Regards,
    Srikanth

    Hi Parama,
    Thank you.
    I tried so many times to  recheck in DEV server even though it is giving same error?
    Regards,
    srikanth

  • Par file deployment from nwds - sap-plugin.log error

    i'm trying to deploy par file
    all my setting are right, but i get error that i see in sap-plugin.log file
    Server returned HTTP response code: 401 for URL: http://sapepdev:50100
    does anyone knows how to fix that problem?
    is my "nwds-> preference-? workbench-> proxy " settings should be like the settings in the browser?
    thanks
    Roni

    the error in sap-plugin.log is:
    [02.01.07 / 11:05] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > No Information
    java.io.IOException: Server returned HTTP response code: 401 for URL: http://sapepdev:50100/irj/servlet/prt/portal/prteventname/upload/prtroot/com.sap.portal.runtime.system.console.ArchiveUploader?login_submit=on&j_user=amit-y&j_password=123456&j_authscheme=default&uidPasswordLogon=Log%20on
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:800)
         at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.readResponse(DeployEngine.java:363)
         at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.uploadPar(DeployEngine.java:435)
         at com.sap.portal.developmentTools.general.wizards.upload.DeployEngine.deploy(DeployEngine.java:221)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.processUpload(SAPMPWizard.java:416)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1.run(SAPMPWizard.java:350)
         at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
         at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
         at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
         at com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard.performFinish(SAPMPWizard.java:531)
         at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at org.eclipse.ui.actions.ExportResourcesAction.run(ExportResourcesAction.java:112)
         at org.eclipse.jface.action.Action.runWithEvent(Action.java:842)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:456)
         at org.eclipse.jface.action.ActionContributionItem.handleWidgetEvent(ActionContributionItem.java:403)
         at org.eclipse.jface.action.ActionContributionItem.access$0(ActionContributionItem.java:397)
         at org.eclipse.jface.action.ActionContributionItem$ActionListener.handleEvent(ActionContributionItem.java:72)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)

Maybe you are looking for