Deploying a program to a user with UAC enabled causes LaunchWith32BitLauncher error and system crash
We are deploying a program to run as the logged on user on a Win 7 Sp1 client which runs as an EXE silently. It fails to execute and we believe that it's due to it being blocked by UAC.
When we examine the logs we see the following error in the Ccm32BitLauncher.log "the LaunchWith32BitLauncher failed with error code 0x800702e4" (The requested operation requires elevation) and in the execmgr.log we see "CreateProcess
or CreateProcessAsUser failed to execute command line with non-recoverable error 0x800702e4" along with "EnterRsRuningState failed to run script scriptname.exe 0x87d01101" (A fatal error has been encountered while attempting to run the program.
The program execution will not be retried.) Afterwards the system will either recycle hard or blue screen - sometimes its immediate and sometimes its 1-3 minutes later.
This program runs against the machine with the user's rights, which may or may not have admin rights, because its modifying something user specific. For the users that have admin rights it works fine, on other non admin users is when it crashes.
Anyone else come across this out there? We are running SCCM 2012 R2 (no CUs).
Thanks
- Dave
Hi,
If this problem is related to UAC, you could try to set GPO settings(User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode) to
Elevate without prompting.
For more information:
ConfigMgr 2012: Application Deployment and User Account Control (UAC)
http://mwesterink.wordpress.com/2013/10/04/configmgr-2012-application-deployment-and-user-account-control-uac/
Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Printing in Vista with UAC enabled
I am running Acrobat 8.1.2 on Vista Ultimate SP1 with UAC enabled. My account is a member of the Administrators group.
When I open IE and try to print to "Adobe PDF", Adobe properly shows me the "Save PDF File As" dialog where I enter a valid filename. The save path shown is the "User -> Documents" folder (where I have proper file rights). When I click Save to save the PDF, a dialog shows up which says "For your computer's security, this file was saved to the Temporary Internet Files Folder. Do you want to open this folder?"
If you reply yes, it opens Explorer to a path where the PDF does not exist. I cannot find the PDF anywhere on my system.
My research on Google has resulted in comments which claim that this issue was resolved in Acrobat 8.1. Yet, I still have the problem.
If I set IE to "Run as Administator", the problem does not happen. But then I lose all the security benefits of UAC in IE.
Is there a way to fix this problem without disabling UAC or without disabling Protected Mode is IE which again helps protect my computer?
TIA,
PierreI'd like to report the exact same problem (I'm using Vista Business, SP1, UAC enabled) and add:
-- the problem persists after a complete reinstall of Vista (up to SP1 and all updates) then a clean install of CS3 Design Premium
-- Clicking on the Adobe convert button in IE7 seemingly works since something pops up in Acrobat but the file is actually distorted.
-- If I open IE7 using "Run as Adminstrator" the problem goes away. I also have no problem using print to pdf in other programs (Firefox, MS Office, etc.)
-- the above problem plus the event error below are hardware dependent: I have them on my Dell Optiplex 755 desktop (hard drives in ACHI/SATA mode) but not on my Vista SP1 Thinkpad laptop.
-- With Flexnet Licensing running, I also get 1 to 3 Event ID error#'s 1108 EVERY TIME I shutdown the computer (see your Event Viewer/Custom Views/Administrative Events):
"The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing."
Example:
1108
0
2
101
0
0x4020000000000000
7382
Security
xxxxxx-xxxx-PC
4647
Microsoft-Windows-Security-Auditing -
i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?
Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432 -
My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
BSOD with both Kernal Security Check Error and Bad Pool Header.
All -
I have a HP DV7 laptop with Windows 8.1. It has BSOD with both Kernal Security Check Error and Bad Pool Header.
Despite doing all the built in HP tests, there is nothing. Using an Anker HardDrive Dock results in the identical errors on another machine.
Bottom line, even if I could see the DMP files (which I cannot); because the machine fails to boot, there are no files to be copied.
I have tried various AIO and UEFI disks and USB, and the laptop NEVER accepts the PREINSTALL environment. Being unable to use the Anker has never happened. I seem completely locked out of the drive. Any suggestions? Thx.
Bruce A AdesHi Texas_Bruiser
Some required details are needed for us to help you.
Ensure that the BIOS/UEFI has been configured to allow boot from DVD/CD or USB.
When you attempted to boot into PREINSTALL environment (PE) by using disks or USB, we need more details about error message or what happened?
If your computer cannot even boot into Windows PE by using installation media, we suggest you check if memory and other hardware are works properly on this computer. Also try to plug this hard disk on other computer as data volume, see if the hard disk works.
Regards
D. Wu -
Revision: 4870
Author: [email protected]
Date: 2009-02-05 15:33:52 -0800 (Thu, 05 Feb 2009)
Log Message:
TextView with textAlign="justify" causes infinite loop and eventual RTE. Vellum sometimes returns width and/or height larger than the request width/height due to rounding error. This triggers a contentWidth/Height change event which triggers the scroller which comes back in to TextView updateDisplayList, etc.
QE Notes:
Doc Notes:
Bugs: SDK-19144
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19144
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/components/TextView.as -
Deploying with UAC enabled on Win7 client
Hi,
We want to enable the UAC on Windows 7 client. But I have problem deploying applications. We are in a AD domain.
How can I deploy applications in "Administrator UAC disabled mode" to not have problems ?
Thank you for your helpcarrela,
Yep, I copy all of my source files first.
We've tried most every option we can think of, and it's the most reliable and the simplest (as far as being able to apply the same deployment methodology across the board).
Unfortunately, not every installer is a straight-up MSI. Also, you don't always want to re-package every application, because then it's your responsibility to support it, not the vendor's.
We have 600+ bundles and have made multiple passes through them all as we have changed methodologies several times.
You do have the option of uploading your large bundles to the repository, and then letting ZENworks handle deploying the files to your users in the background, but I prefer not to throw such huge items into the repository as it can take a very long time for it to compress and encrypt the files, plus, once you throw an item into the black box, the only way to modify it is to hang on to the source files and re-upload the entire thing if you want to make any changes.
You are correct about dynamic administrator working only if you copy the files locally, and I can tell you that we are an Active Directory environment and have had no problems with dynamic administrator accounts. All they are is a local account on the box that gets created/deleted on the fly by the ZENworks service (incidentally, this is why you see the "Interactive Services Detection" dialog when any installer with a UI is launched in the dynamic administrator space, because the ZENworks service is running as the SYSTEM account (session 0)).
Jacob -
Application crashes with UAC enabled (Need help bad)
I have an application that installs a service configured to run with the Local System account.
The application never prompts me for UAC but it crashes if the following is true
1. UAC is enabled
2. Service is configured to run using local system account
Workarounds:
Disabled UAC (not an option for me) or change the service to run using a service account (possible)
Beside setting up a service account does anybody know how I can get around my issue with UAC?
Thanks!!Please be courteous enough to provide the exact name and version of the application causing this. It is absolutely impossible to suggest possible actions without the name and version of the application.
Have you contacted the publisher/vendor of the application about this? The publisher/vendor has sole responsibility for support of their products and to ensure they run properly in the Windows 7 environment.
Some applications require that the installation setup program be run As Administrator, but this is information you would have to acquire from the publisher/vendor of the application.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Create Users with Mail enabled in dscl or command line
I have figured out how to use the dscl to add a user.
example:
$ sudo dscl . create /users/rothman uid 701
$ sudo dscl . create /users/rothman gid 20
$ sudo dscl . create /users/rothman realname "Ernest Rothman"
$ sudo dscl . create /users/rothman passwd \*
I went as far as to launch WorkGroup manager to enable Mail.
The following gave me the key values:
dscl . read /Users/test MailAttribute > mailsettings.txt
When I try to replace from the txt file. WorkGroup Manager than believes the Mail is not enabled.
How do I use dscl or a terminal command to enable the user with mail server and to use IMAP Only?
I do not want to always have to remotely connect to launch Workgroup Manager to enable mail for new users.
I hope you can help for I am new dscl or even NetInfo command line tools.
I have tried these, but I guess it does't like how it is being restored into that property.
dscl . create /Users/test MailAttribute `< mailsettings.txt`
<?xml version="1.0" encoding="UTF-8"?>
<dict>
<key>kAPOPRequired</key>
<string>APOPNotRequired</string>
<key>kAltMailStoreLoc</key>
<string></string>
<key>kAttributeVersion</key>
<string>Apple Mail 1.0</string>
<key>kAutoForwardValue</key>
<string></string>
<key>kIMAPLoginState</key>
<string>IMAPAllowed</string>
<key>kMailAccountLocation</key>
<string>192.168.181.132</string>
<key>kMailAccountState</key>
<string>Enabled</string>
<key>kPOP3LoginState</key>
<string>POP3Deny</string>
<key>kUserDiskQuota</key>
<string>0</string>
</dict>
I have also tried appending by doing something like this.
dscl . create /Users/test MailAttribute '<?xml version="1.0" encoding="UTF-8"?>’
dscl . append /Users/test MailAttribute ‘<dict>’
dscl . append /Users/test MailAttribute ‘<key>kAPOPRequired</key>’
dscl . append /Users/test MailAttribute ‘<string>APOPNotRequired</string>’
dscl . append /Users/test MailAttribute ‘<key>kAltMailStoreLoc</key>’
dscl . append /Users/test MailAttribute ‘<string></string>’
dscl . append /Users/test MailAttribute ‘<key>kAttributeVersion</key>’
dscl . append /Users/test MailAttribute ‘<string>Apple Mail 1.0</string>’
dscl . append /Users/test MailAttribute ‘<key>kAutoForwardValue</key>’
dscl . append /Users/test MailAttribute ‘<string></string>’
dscl . append /Users/test MailAttribute ‘<key>kIMAPLoginState</key>’
dscl . append /Users/test MailAttribute ‘<string>IMAPAllowed</string>’
dscl . append /Users/test MailAttribute ‘<key>kMailAccountLocation</key>’
dscl . append /Users/test MailAttribute ‘<string>192.168.181.132</string>’
dscl . append /Users/test MailAttribute ‘<key>kMailAccountState</key>’
dscl . append /Users/test MailAttribute ‘<string>Enabled</string>’
dscl . append /Users/test MailAttribute ‘<key>kPOP3LoginState</key>’
dscl . append /Users/test MailAttribute ‘<string>POP3Deny</string>’
dscl . append /Users/test MailAttribute ‘<key>kUserDiskQuota</key>’
dscl . append /Users/test MailAttribute ‘<string>0</string>’
dscl . append /Users/test MailAttribute ‘</dict>’Got it to take as a single statement.
dscl . create /users/test applemail "<?xml version='1.0' encoding='UTF-8'?> <dict> <key>kAPOPRequired</key> <string>APOPNotRequired</string> <key>kAltMailStoreLoc</key> <string></string> <key>kAttributeVersion</key> <string>Apple Mail 1.0</string> <key>kAutoForwardValue</key> <string></string> <key>kIMAPLoginState</key> <string>IMAPAllowed</string> <key>kMailAccountLocation</key> <string>192.168.181.132</string> <key>kMailAccountState</key> <string>Enabled</string> <key>kPOP3LoginState</key> <string>POP3Deny</string> <key>kUserDiskQuota</key> <string>0</string> </dict>"
Doing the above showed in WorkGroup manager and I tested and the user received a email, so now I can automate adding users without needing the GUI. *Just to note you still have to setup mail services and your virtual, aliases files for postfix. This is just so the user is opened up to be allowed to receive email in the first place.
I still could not seem to pipe a file into dscl command even though the file was a single line of text. I had planned to embed this in a single command so no big deal. -
Some errors in creating AD user with mailbox enabled
Dear adler Steven / all,
I followed all your posts and able to create AD user with mail box enabled, Now i am able to send and receive mails for this user.
But the user in AD is disabled , that is it is not with the icon of an enabled user but it has an icon of user with a cross marked in Red.
i have given the successful coding below:
attrs.put("cn","chngcode");
attrs.put("instanceType","4");
attrs.put("objectCategory","CN=Person,CN=Schema,CN=Configuration,DC=csindia,DC=com");
attrs.put("objectClass","top");
attrs.put("objectClass","person");
attrs.put("objectClass","organizationalPerson");
attrs.put("objectClass","user");
attrs.put("mailNickname","chngcode");
attrs.put("mail","[email protected]");
attrs.put("sAMAccountName","chngcode");
attrs.put("msExchHomeServerName","/o=CYGNUS_O/ou=CSINDIA/cn=Configuration/cn=Servers/cn=CSISERVER2");
attrs.put("objectCategory","CN=Person,CN=Schema,CN=Configuration,DC=csindia,DC=com");
attrs.put("userPrincipalName","[email protected]");
attrs.put("distinguishedName","CN=chngcode,CN=Users,DC=csindia,DC=com");
attrs.put("instanceType","4");
attrs.put("mDBUseDefaults","TRUE");
attrs.put("name","chngcode");
attrs.put("replicatedObjectVersion","0");
attrs.put("legacyExchangeDN","/o=CYGNUS_O/ou=CSINDIA/cn=Recipients/cn=chngcode");
attrs.put("givenName","chngcode");
attrs.put("displayName","chngcode");
// Create the context
Context result = ctx.createSubcontext(userName, attrs); Help me on further process :
-How to solve the above bottle neck , Is any thing missed for above?
- I have not set the password thru codings. what to do on this ?
-When/where to use the homeMDB attributes ( Is it necessary to use this homeMDB ? )
-How to create the mailbox with in a store ? (Presently i have created the mail box in Recipients container for this AD user)
Expecting your early enlightening on this..
Advanced thanks for your efforts.
By,
Softeek.If you refer to the post titled "JNDI, Active Directory (Creating new users & demystifying userAccountControl)" at http://forum.java.sun.com/thread.jspa?threadID=582103&tstart=15 you wil notice that because of the stricter security in Windows Server 2003 Active Directory, user accounts created with null passwords are automagically disabled.
To enable new user accounts you must assign a password (that meets the security policy !) and then enable the account. -
Hi All,
I've got a client that's running into an intermittent crashing problem with InDesign. Ordinarily "intermittent" points to hardware, but we wanted to rule out bad software first, especially as InDesign is the ONLY application that's crashing on this system. The crashing doesn't seem to correspond to any given task that's executed within InDesign either. This is an iMac 2.5 GHz Intel Core i5 (mid 2011 model), 8 GB of RAM. Original this iMac was running Snow Leopard with InDesign CS5 (7.0.4), and crashing fequently then. For numerous reasons including the crashing we did an erase and install of the OS, this time installing 10.8.2, and a fresh install of CS5 and ran all updates from Adobe (to 7.0.4), and then ran a Disk Permissions repair (we have not updated to 10.8.3 due to reports I've seen of more crashing with InDesign CS5). Fonts and InDesign application support files from ~/Library were migrated over manually, but no other user data. The crashing occurs within two user accounts on this fresh OS (one of which was created to troubleshoot with as a clean environment) so isn't likely user account related but due to fonts that may not be confirmed. Being that it's intermittent it's been quite hard to track down. Linotype Font Explorer is installed on this system and I have just now disabled the font activation plugins in case that is part of the problem here; haven't had a chance yet to let the system run without those to see if the problem is resolved. Two recent crash logs (below) show different activity causing the crash (I've included thread 0 only, but can post more if requested; my experience has been that thread 0 will usually give you what you need, but given that we're seeing different cuases here I'm at a loss). We have tried fresh RAM in the system in case this was related to bad memory, and that made no difference. Font caches for both applications and the OS have been cleared and fonts showing any missing printer font files have been disabled. Any help would be greatly apprecaited.
Many thanks,
Mike
Log 1:
Process: Adobe InDesign CS5 [11565]
Path: /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Identifier: com.adobe.InDesign
Version: 7.0.4.553 (7040)
Code Type: X86 (Native)
Parent Process: launchd [238]
User ID: 501
Date/Time: 2013-05-02 12:45:38.327 -0700
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
VM Regions Near 0x4:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
__TEXT 0000000000001000-0000000000005000 [ 16K] r-x/rwx SM=COW /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.adobe.InDesign.Links 0x11da9cfd 0x11d39000 + 462077
1 com.adobe.InDesign.Links 0x11dad857 0x11d39000 + 477271
2 com.adobe.InDesign.Links 0x11dabcc0 0x11d39000 + 470208
3 com.adobe.InDesign.Links 0x11da96b9 0x11d39000 + 460473
4 DataBaseLib.dylib 0x010fd89f InterfaceSnapshot::ResetObjectToSnapshot(IDataBase*, IPMUnknown*, IDType<SnapshotID_tag>, ISnapshotCache*, scoped_lastrevinfodataref&) + 575
5 ObjectModelLib.dylib 0x01063b80 0x1038000 + 179072
6 ObjectModelLib.dylib 0x01070eb8 ShuksanInit(IStartupScreen* (*)(), IPlugIn*) + 23784
7 DataBaseLib.dylib 0x010ce158 0x10c9000 + 20824
8 com.adobe.InDesign.Links 0x11d7b093 0x11d39000 + 270483
9 com.adobe.InDesign.Links 0x11d7d991 0x11d39000 + 280977
10 com.adobe.InDesign.Links 0x11d8ee5a 0x11d39000 + 351834
11 com.adobe.InDesign.Links 0x11d9f17f 0x11d39000 + 418175
12 com.adobe.InDesign.Links 0x11da016e 0x11d39000 + 422254
13 com.adobe.InDesign.Links 0x11d78258 0x11d39000 + 258648
14 com.adobe.InDesign.Links 0x11e05bbc GetPlugIn + 191420
15 com.adobe.InDesign.Links 0x11e05836 GetPlugIn + 190518
16 com.adobe.InDesign.Document Framework 0x0d937a85 0xd936000 + 6789
17 com.adobe.InDesign.Document Framework 0x0d937b75 0xd936000 + 7029
18 com.adobe.InDesign.AppFramework 0x0bbb60ed GetPlugIn + 201661
19 com.adobe.InDesign.Links 0x11d71025 0x11d39000 + 229413
20 com.adobe.InDesign.Links 0x11d70d6c 0x11d39000 + 228716
21 ObjectModelLib.dylib 0x01062640 0x1038000 + 173632
22 ObjectModelLib.dylib 0x010651bb 0x1038000 + 184763
23 com.adobe.InDesign.Document Framework 0x0d9d0ed0 0xd936000 + 634576
24 com.adobe.InDesign.Links 0x11dc53f8 0x11d39000 + 574456
25 com.adobe.InDesign.Document Framework 0x0d937a85 0xd936000 + 6789
26 com.adobe.InDesign.Document Framework 0x0d937b75 0xd936000 + 7029
27 com.adobe.InDesign.AppFramework 0x0bbb60ed GetPlugIn + 201661
28 PublicLib.dylib 0x01161d6c UIDList::ReadWrite(IPMStream*, UIDList::EXferType) + 204
29 PublicLib.dylib 0x01161f50 UIDList::ReadWriteXferReference(IPMStream*) + 32
30 com.adobe.InDesign.Links 0x11db2d49 0x11d39000 + 499017
31 ObjectModelLib.dylib 0x01062640 0x1038000 + 173632
32 ObjectModelLib.dylib 0x01065ab5 0x1038000 + 187061
33 com.adobe.InDesign.Document Framework 0x0d9d13ec 0xd936000 + 635884
34 com.adobe.InDesign.Document Framework 0x0d9d0c1e 0xd936000 + 633886
35 com.adobe.InDesign.Generic Page Item 0x117a0a86 GetPlugIn + 149142
36 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
37 com.adobe.InDesign.Utilities 0x0ce10aa3 0xce0f000 + 6819
38 com.adobe.InDesign.Utilities 0x0ce10ccc 0xce0f000 + 7372
39 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
40 PublicLib.dylib 0x0116557b CmdUtils::ProcessCommand(ICommand*) + 59
41 com.adobe.InDesign.Document Framework 0x0d952c6d 0xd936000 + 117869
42 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
43 com.adobe.InDesign.Utilities 0x0ce10aa3 0xce0f000 + 6819
44 com.adobe.InDesign.Utilities 0x0ce10ccc 0xce0f000 + 7372
45 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
46 PublicLib.dylib 0x0116557b CmdUtils::ProcessCommand(ICommand*) + 59
47 PublicLib.dylib 0x01163cd1 CompoundSequenceCmd::Do() + 369
48 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
49 com.adobe.InDesign.Utilities 0x0ce10aa3 0xce0f000 + 6819
50 com.adobe.InDesign.Utilities 0x0ce10ccc 0xce0f000 + 7372
51 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
52 PublicLib.dylib 0x0116557b CmdUtils::ProcessCommand(ICommand*) + 59
53 com.adobe.InDesign.AppFramework 0x0bb83bef 0xbb60000 + 146415
54 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
55 com.adobe.InDesign.Utilities 0x0ce10aa3 0xce0f000 + 6819
56 com.adobe.InDesign.Utilities 0x0ce10ccc 0xce0f000 + 7372
57 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
58 PublicLib.dylib 0x0116557b CmdUtils::ProcessCommand(ICommand*) + 59
59 com.adobe.InDesign.AppFramework 0x0bb83bef 0xbb60000 + 146415
60 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
61 com.adobe.InDesign.Utilities 0x0ce10aa3 0xce0f000 + 6819
62 com.adobe.InDesign.Utilities 0x0ce10ccc 0xce0f000 + 7372
63 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
64 PublicLib.dylib 0x0116557b CmdUtils::ProcessCommand(ICommand*) + 59
65 com.adobe.InDesign.Widgets 0x0e99304b GetPlugIn + 211323
66 com.adobe.InDesign.Widgets 0x0e996386 GetPlugIn + 224438
67 com.adobe.InDesign.Widgets 0x0e995fc0 GetPlugIn + 223472
68 PublicLib.dylib 0x0117982b CScrapSuite_Extensible::Paste(IClipboardController*, IControlView*, short) + 219
69 com.adobe.InDesign.Application UI 0x0d3d1ff4 0xd3af000 + 143348
70 com.adobe.InDesign.Application UI 0x0d3d2f05 0xd3af000 + 147205
71 com.adobe.InDesign.Application UI 0x0d3d0abc 0xd3af000 + 137916
72 com.adobe.InDesign.Application UI 0x0d433632 GetPlugIn + 217730
73 com.adobe.InDesign.Actions 0x13d30de3 GetPlugIn + 11699
74 com.adobe.InDesign.Actions 0x13d1eccc 0x13d1d000 + 7372
75 WidgetBinLib.dylib 0x02880334 MDefaultEH::KeyboardShortcut(IEvent*) + 484
76 WidgetBinLib.dylib 0x0287fb34 CDefaultEH::KeyDown(IEvent*) + 148
77 WidgetBinLib.dylib 0x02880133 MDefaultEH::KeyDown(IEvent*) + 163
78 PublicLib.dylib 0x01184bee CEventDispatcher::DispatchToEventHandlers(IEvent*) + 222
79 PublicLib.dylib 0x011846a8 CEventDispatcher::DispatchEvent(IEvent*, IEvent::SystemHandledState) + 24
80 com.adobe.InDesign.Application UI 0x0d446b99 GetPlugIn + 296937
81 com.adobe.InDesign.Application UI 0x0d4445dc GetPlugIn + 287276
82 com.apple.HIToolbox 0x9995cb6b _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
83 com.apple.HIToolbox 0x997e4594 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1343
84 com.apple.HIToolbox 0x997e3980 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
85 com.apple.HIToolbox 0x997f7855 SendEventToEventTarget + 88
86 com.apple.HIToolbox 0x998178b2 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 2392
87 com.apple.HIToolbox 0x997e4a3f DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2538
88 com.apple.HIToolbox 0x997e3980 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
89 com.apple.HIToolbox 0x997f7855 SendEventToEventTarget + 88
90 com.apple.HIToolbox 0x997d9077 SendTSMEvent + 75
91 com.apple.HIToolbox 0x997d8b0b SendUnicodeTextAEToUnicodeDoc + 745
92 com.apple.HIToolbox 0x997d8704 TSMKeyEvent + 980
93 com.apple.HIToolbox 0x998281e5 TSMProcessRawKeyEvent + 3102
94 com.apple.HIToolbox 0x99868ec5 HandleCompatibilityKeyEvent + 323
95 com.apple.HIToolbox 0x997e0aba HIApplication::EventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 7318
96 com.apple.HIToolbox 0x9995cb6b _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
97 com.apple.HIToolbox 0x997e4594 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1343
98 com.apple.HIToolbox 0x997e3980 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
99 com.apple.HIToolbox 0x997e37ca SendEventToEventTargetWithOptions + 94
100 com.apple.HIToolbox 0x9981738c ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1074
101 com.apple.HIToolbox 0x997e4a3f DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2538
102 com.apple.HIToolbox 0x997e3980 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 430
103 com.apple.HIToolbox 0x997f7855 SendEventToEventTarget + 88
104 com.adobe.InDesign.AppFramework 0x0bb62fd5 0xbb60000 + 12245
105 com.adobe.InDesign.AppFramework 0x0bb884fa GetPlugIn + 14282
106 com.adobe.InDesign 0x0000288b main + 187
107 com.adobe.InDesign 0x000027a6 start + 54
Log 2:
Process: Adobe InDesign CS5 [745]
Path: /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Identifier: com.adobe.InDesign
Version: 7.0.4.553 (7040)
Code Type: X86 (Native)
Parent Process: launchd [142]
User ID: 501
Date/Time: 2013-05-07 15:00:42.593 -0700
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
__TEXT 0000000000001000-0000000000005000 [ 16K] r-x/rwx SM=COW /Applications/Adobe InDesign CS5/Adobe InDesign CS5.app/Contents/MacOS/Adobe InDesign CS5
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.adobe.InDesign.Text 0x0ff26f59 GetPlugIn + 1072585
1 com.adobe.InDesign.Text 0x0ff2c0eb GetPlugIn + 1093467
2 com.adobe.InDesign.Text 0x0ff2c1ef GetPlugIn + 1093727
3 com.adobe.InDesign.Text 0x0ff2c2c7 GetPlugIn + 1093943
4 DataBaseLib.dylib 0x010fd89f InterfaceSnapshot::ResetObjectToSnapshot(IDataBase*, IPMUnknown*, IDType<SnapshotID_tag>, ISnapshotCache*, scoped_lastrevinfodataref&) + 575
5 ObjectModelLib.dylib 0x01063b80 0x1038000 + 179072
6 ObjectModelLib.dylib 0x01070eb8 ShuksanInit(IStartupScreen* (*)(), IPlugIn*) + 23784
7 DataBaseLib.dylib 0x010ce158 0x10c9000 + 20824
8 com.adobe.InDesign.Text 0x0ff2e909 GetPlugIn + 1103737
9 com.adobe.InDesign.Text 0x1004932e GetPlugIn + 2261406
10 com.adobe.InDesign.Text 0x0fe3fcba GetPlugIn + 125738
11 com.adobe.InDesign.Text 0x0fe400ff GetPlugIn + 126831
12 com.adobe.InDesign.Text 0x0fec3876 GetPlugIn + 665318
13 PublicLib.dylib 0x01164422 Command::DoImmediate(short) + 34
14 com.adobe.InDesign.Utilities 0x0ce3baa3 0xce3a000 + 6819
15 com.adobe.InDesign.Utilities 0x0ce3bccc 0xce3a000 + 7372
16 com.adobe.InDesign.AppFramework 0x0bb7a688 0xbb60000 + 108168
17 com.adobe.InDesign.AppFramework 0x0bb6cf11 0xbb60000 + 53009
18 com.adobe.InDesign.AppFramework 0x0bb62f0e 0xbb60000 + 12046
19 com.adobe.InDesign.AppFramework 0x0bb884fa GetPlugIn + 14282
20 com.adobe.InDesign 0x0000288b main + 187
21 com.adobe.InDesign 0x000027a6 start + 54Thanks, Peter.
The "link related" and "text related" crashes were what I interpretted here, too, though I'm at a loss on how to proceed given that this is a fresh system and applications. This is happening with multiple InDesign projects in a design office environment where many others work on the same files and none of the other computers are having problems with these files. I've removed the same files listed (thank you for those) before and did so effectively with creating the new user account to test with, but it had no effect. I just tried again though, as these files could easily have becone corrupt again if they were being written to when InDesign crashed. Will let you know if that makes any difference. I've also gone through and completely cleaned out the fonts again and once more cleared the font caches. If need be I'll reboot this system into safe mode and try that way.
Best,
Mike -
How can I copy a file through a logon script with UAC enabled ?
Hello,
I have a batch that is copying a file to "%public%\desktop\" (windows 7) folder through a logon GPO (GPO from user configuration).
Everytime I try, I have an "access denied". I know it is because UAC and I don't want to disable it.
Through explorer.exe, I can copy this file with no problem with this same account.
How can I copy a file to such folder through group policy please ?
I dont want to use GPP as the script is used on WinXP too and I dont have the hotfix to support GPP on this operating systems.
Thank you> I have a batch that is copying a file to "%public%\desktop\" (windows 7)
> folder through a logon GPO (GPO from user configuration).
> Everytime I try, I have an "access denied". I know it is because UAC and
> I don't want to disable it.
Since you are copying to a non-user specific-directory, I'd recommend
using a startup script instead...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Adding users with special characters results in error
Hi all,
I know it is not best practice to implement a Active Directory with user names containing special characters.
Unfortunately, we come across some sites that do have these special characters in their user names.
So, maybe it is a reason to tell the customer to reevaluate their naming policy, but in some cases this is
just not possible / desirable. What we see when you try to add a user in the Sun VDI portal (1801) with
a special character in his or her name, the VDI Portal goes back to the main login screen of the portal and
displays an error:
Internal Error Occurred!
You have been logged out because a consistent response could not be guaranteed.
If the error continues to occur, contact your local technical support and provide .....
Does anyone know a workaround / fix for this.
We are running Sun VDI 3.1 Revenue Release.
Kind regards,
SanderSvanderpost
Open a support call with Sun there is a fix for this issue. -
Want to get the list users with select access to v$ synonyms and v$ views
I've to write a sql (DB 11.1) to get the list of users who has select access to v$ synonym and v$ views. I've written the following sqls to do this but they both return the same result and I don't know how to verify it. It will be a great help if you could validate the sqls and let me know if something is wrong. Thanks for the help.
-- v$ views
select 'vview',
substr(SYS_CONNECT_BY_PATH(c, '->'),3,512) path, c
from (select null p, view_name c
from dba_views
where view_name like ('V$%')
union all
select -- users/roles and roles granted
granted_role p,
grantee c
from dba_role_privs
where granted_role != 'DBA'
union all
select -- users/roles with select on DBA views
table_name p, grantee c
from dba_tab_privs
where privilege = 'SELECT'
and table_name like ('V$%'))
where (c = 'PUBLIC' OR c in (select username from dba_users))
AND c NOT IN('MDSYS','DMSYS','CTXSYS','WMSYS','ORDSYS','OLAPSYS','DBSNMP')
start with p is null connect by p = prior c
-- v$ synonyms
select 'vsynonyms',
substr(SYS_CONNECT_BY_PATH(c, '->'),3,512) path, c
from (select null p, SYNONYM_NAME c
from ALL_SYNONYMS
where table_name like ('V$%')
union all
select -- users/roles and roles granted
granted_role p,
grantee c
from dba_role_privs
where granted_role != 'DBA'
union all
select -- users/roles with select on DBA views
table_name p, grantee c
from dba_tab_privs
where privilege = 'SELECT'
and table_name like ('V$%'))
where (c = 'PUBLIC' OR c in (select username from dba_users))
AND c NOT IN('MDSYS','DMSYS','CTXSYS','WMSYS','ORDSYS','OLAPSYS','DBSNMP')
start with p is null connect by p = prior cI've modified the sql to include GV$ and all select [any] privs.
select 'vview',
substr(SYS_CONNECT_BY_PATH(c, '->'),3,512) path, c
from (select null p, view_name c
from dba_views
where view_name like ('V$%') OR view_name like ('GV$%')
union all
select -- users/roles and roles granted
granted_role p,
grantee c
from dba_role_privs
where granted_role != 'DBA'
union all
select -- users/roles with select on DBA views
table_name p, grantee c
from dba_tab_privs
where privilege like 'SELECT%'
and table_name like ('V$%') OR table_name like ('GV$%') )
where (c = 'PUBLIC' OR c in (select username from dba_users))
AND c NOT IN('MDSYS','DMSYS','CTXSYS','WMSYS','ORDSYS','OLAPSYS','DBSNMP')
start with p is null connect by p = prior c
union
select 'vsynonyms',
substr(SYS_CONNECT_BY_PATH(c, '->'),3,512) path, c
from (select null p, SYNONYM_NAME c
from ALL_SYNONYMS
where table_name like ('V$%') OR table_name like ('GV$%')
union all
select -- users/roles and roles granted
granted_role p,
grantee c
from dba_role_privs
where granted_role != 'DBA'
union all
select -- users/roles with select on DBA views
table_name p, grantee c
from dba_tab_privs
where privilege like 'SELECT%'
and table_name like ('V$%') OR table_name like ('GV$%') )
where (c = 'PUBLIC' OR c in (select username from dba_users))
AND c NOT IN('MDSYS','DMSYS','CTXSYS','WMSYS','ORDSYS','OLAPSYS','DBSNMP')
start with p is null connect by p = prior c -
SAP DB13 BRARCHIVE with UNC path causes an Error
Hi,
i try to start brarchive with "backup_dev_type = disk", "archive_function = save_delete" and "archive_copy_dir =
isrmsw109\SAP_Backup\SM1\Archive". From DB13 I get an error that the Directory was not found:
(29.02.2008 10:47:43 BR0282E Directory '
isrmsw109\SAP_Backup\SM1\Archive' not found)
When I execute brarchive from brtools with the same init<???>.sap file it works fine.
Has anybody an idea???
Thx for reply.
JoachimI´ve found the solution.
Alle Servers are Standalone. I´ve create on the Share Server a User calles "SAPService" and granted to this user admin rights.
Now it works.
Maybe you are looking for
-
My 7th generation nano is stuck in recovery mode loop
Any suggestions? Already reset by holding hold button and on/off. Already removed and redownloaded itunes. This is my 2nd nano with the same issue.
-
Hi All, i want know that is there any standard program for sending P.O.'s by e-mail to vendor's email-id? i want to know how to configure this. Sending P.O. By Mail To Vendor please help me regarding out in this. Thanks & Regards, Vijay.
-
Hi Guys, I have a query on the rank function. select "ProdHier"."prod_fam_name",rank() over (order by sum("Sales"."units_sold") desc) from "Sales", "ProdHier" where ("Sales"."prod_num" = "ProdHier"."prod_num") group by "ProdHier"."prod_fam_name" give
-
Before downloading the Adobe Reader 9 software, the web page says 33.5 MB; but, after downloading my computer says 204 MB which is confirmed. What is going on?
-
Edit or copy a lens profile?
Ive got a Canon 55-250mm f/4-5.6IS II canon lens (previously used a borrowed non vII) and come into a problem. Lightroom has a lens profile for the old one, picks it up on auto and applies the correction perfectly so no problems. However it DOESNT ha