Deployment : Exporting and importing a ABAP code to other SAP Server

Hello Expert,
I am very new to SAP ABAP. My query is , If we write a code in user exit on one SAP server and if we need to deploy the same on other SAP server who are not tightly coupled with each other , How should we do??
Is there any way to export and import the code?? How do we deliver the code if anyone wants that code? Is there any way to deliver the code other than manual copy and paste??
Any idea??
Thanks,
Prashant

Hi,
Check this.May be this can help you.
http://www.sap-basis-abap.com/sapac008.htm
http://www.sap-press.de/forum/gp/themaID-5/zeige-12302/thread
Message was edited by: Jayanthi Jayaraman

Similar Messages

How to export and import the source code

Hi,
I want to ensure the dev databse and prod databse same
I dont mind about the data.
I want all the objects ( packages,procedures,functions ) to be exported and imported.
Please help me out in this
Regards,
Ravi

I wrote a long message but lost everything while trying to post :(
You haven't mentioned about tables. If there are some changes in the tables structure, you need to take care of that also as in the new database if you don't change the tables all the dependent procedures...functions...packages would go invalid.
Amardeep Sidhu
http://www.amardeepsidhu.com

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Exporting and importing word doc

Hai i want to export and import the ms-word document to Sql server.
it is like sending attachment and downloading attachment with e-mail.
please help me how can i do this.if u have example please give me.
what data type i have to take for that coloumn.
thank u in advance.

Just as a guess I would look at a BLOB.

Use of export and import in oo abap

Hello experts,
We are new to oo abap and using process controlled workflow for BRF.
There are 3 methods which we are using. /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP, /SAPSRM/IF_WF_AREAGET_RESPONSIBLE_APPROVERS and /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID.
In a situation we want to use document_id which is created in item_map into get_responsible_approvers method.
Therefore, we used export and import in these two methods like the following.
zgc_mock_pdo_guid = is_document-document_guid. "uncomment later
    export zgc_mock_pdo_guid from zgc_mock_pdo_guid to memory id 'Z_MOCK_PDO_GUID' . "uncomment later
and
import zgc_mock_pdo_guid = zgc_mock_pdo_guid from memory id 'Z_MOCK_PDO_GUID' . "uncomment this later
               CALL METHOD /SAPSRM/CL_WF_APV_FACADE=>RETRIEVE_PROCESS_HISTORY
                 EXPORTING
                   IV_DOCUMENT_GUID = zgc_mock_pdo_guid "ins_guid
                   IV_AGENT_ID      = lv_agent
                   IV_LANGUAGE      = sy-langu
                 IMPORTING
                   ES_PROCESS       = ls_process
Now we are getting the results as per our requirements. But I want to know whether or not it is supposed to be used in oo abap context or not otherwise I will find another method to do so. Please advise/suggest about the same.
Thank you.

Hello Keshav, Suhas.
Thank you vary much for your reply. I was definitely a great help to understand the concept.
This ZGC_MOCK_PDO_GUID attribute was already made private. Instead of defining under public section I defined it under attributes tab.
Thank you for your help though.
Right now I am trying to explore another way to do so.
I am trying to get factory instance for tack container using /SAPSRM/IF_CLL_TASKCON_FACTORY interface with method GET_INSTANCE from class /SAPSRM/CL_CH_WD_TASKCONT_FACT.
Later I am trying to get task container from this interface. Then after I am interested to get SC GUID using GET_BO_GUID method.
I have been trying to achieve this in following way. But somehow i am getting this GUID empty.
data :
temp_task_container_factory type REF TO /SAPSRM/IF_CLL_TASKCON_FACTORY,
temp_instance type REF TO /SAPSRM/IF_PDO_BO_SC_ADV,
ins_guid type BBP_GUID, "/SAPSRM/WF_DOCUMENT_GUID,
ls_process_info TYPE /SAPSRM/S_PDO_WF_PROCESS_INFO,
temp_handler TYPE REF TO /SAPSRM/IF_PDO_STATIC_META,
temp_task_container type REF TO /SAPSRM/IF_CLL_TASK_CONTAINER,
lo_task TYPE REF TO /SAPSRM/IF_CLL_TASKCON_FACTORY.
CALL METHOD /SAPSRM/CL_CH_WD_TASKCONT_FACT=>GET_INSTANCE
RECEIVING
RO_TASK_CONTAINER_FACTORY = temp_task_container_factory "
CALL METHOD TEMP_TASK_CONTAINER_FACTORY->GET_TASK_CONTAINER
* EXPORTING
* IV_TRANS_MODE =
* IO_MESSAGE_HANDLER =
* IV_BO_TYPE =
RECEIVING
RO_TASK_CONTAINER = temp_task_container
CALL METHOD TEMP_TASK_CONTAINER->GET_BO_GUID
RECEIVING
RV_BO_GUID = ins_guid .
TRY.
CALL METHOD /SAPSRM/CL_PDO_FACTORY_SC_ADV=>GET_BUFFERED_INSTANCE
EXPORTING
IV_HEADER_GUID = ins_guid
RECEIVING
RO_INSTANCE = temp_instance
ENDTRY.
CALL METHOD ZCL_WF_APV_FACADE=>RETRIEVE_PROCESS_HISTORY
EXPORTING
IV_DOCUMENT_GUID = ins_guid " we are passing ins_guid instead of zGC_MOCK_PDO_GUID this should have area_guid now.
IV_AGENT_ID = lv_agent
IV_LANGUAGE = sy-langu
IMPORTING
ES_PROCESS = ls_process.
But the ins_guid ( returned by RV_BO_GUID ) is empty ( The Bold fonted line of code)
I want to know whether I am doing this instantiation correctly or not or do I have to create class and object here only ?
Right now I am calling the class, getting get_instance and using its instance temp_task_container_factory i am calling interface /SAPSRM/IF_CLL_TASKCON_FACTORY. Is it correct way? PLease advise. Thank you once again.
Edited by: abhijitkamatkar on Feb 7, 2012 1:38 PM

Internal table export and import in ECC 5.0 version

Hi friends,
I am trying to export and import internal table from one program to other program.
The below export and import commands are not working when I run the program in background (using SUBMIT zxxxx via JOB name NUMBER number..)
EXPORT ITAB TO MEMORY id 'ZMATERIAL_CREATE'.
IMPORT ItAB FROM MEMORY ID 'ZMATERIAL_CREATE'.
Normally it should work. Since Its not working I am trying with another alternative..
i.e EXPORT (ptab) INTERNAL TABLE itab.
My sap version is ECC 5.0.
For your information, here I am forwarding sap help. Pls have a look and explain how to declare ptab internal table.
+Extract from SAP help+
In the dynamic case the parameter list is specified in an index table ptab with two columns. These columns can have any name and have to be of the type "character". In the first column of ptab, you have to specify the names of the parameters and in the second column the data objects. If the second column is initial, then the name of the parameter in the first column has to match the name of a data object. The data object is then stored under its name in the cluster. If the first column of ptab is initial, an uncatchable exception will be raised.
Outside of classes you can also use a single-column internal table for parameter_list for the dynamic form. In doing so, all data objects are implicitly stored under their name in the data cluster.
My internal table having around 45 columns.
pls help me.
Thanks in advance
raghunath

The export/import should work the way you are using it. Just make sure you are using same memory id and make sure its unique - meaning u are using it only for this itab purpose and not overwriting it with other values. Check itab is not initial before you export in program 1 - then import it in prog2 with same memory id...also check case, I am not sure if its case sensitive...
Here is how you use the second variant...
Two fields with two different identifications "P1" and "P2" with the dynamic variant of the cluster definition are written to the ABAP Memory. After execution of the statement IMPORT, the contents of the fields text1 and text2 are interchanged.
TYPES:
BEGIN OF tab_type,
    para TYPE string,
    dobj TYPE string,
END OF tab_type.
DATA:
id    TYPE c LENGTH 10 VALUE 'TEXTS',
text1 TYPE string VALUE `IKE`,
text2 TYPE string VALUE `TINA`,
line TYPE tab_type,
itab TYPE STANDARD TABLE OF tab_type.
line-para = 'P1'.
line-dobj = 'TEXT1'.
APPEND line TO itab.
line-para = 'P2'.
line-dobj = 'TEXT2'.
APPEND line TO itab.
EXPORT (itab)     TO MEMORY ID id.
IMPORT p1 = text2
       p2 = text1 FROM MEMORY ID id.

Export and import the windows phone contacts as .vcf file to the application

Hi, I need to export the windows phone contacts as .vcf file and import it to my windows phone application. I'm unable to import the full details of a contact. Is there any sample code to export and import phone contacts programmatically. Please
help if there is any solution. Thanks.
Nikitha

Found this on the internet:
http://www.lumisoft.ee/lswww/download/downloads/Net/
If you download the Lumisoft.Net.Zip and extract it looks like there is a vCard folder with some classes that may help you.
You will need to use something like that or search a bit more and find a vCard C# Helper library.
Bret Bentzinger (MSFT) @awehellyeah

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Export and Import of mappings/process flows etc

Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
Brandon

This should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
     incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
     } else {
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
          puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel

Export and import in alv grid

Hi all,
I am going thru a code in oops alv where when i click in any of the record in the output list then it shuld go to a transaction where it shuld dump all the field values with respect to the clicked field.
frnds i have used EXPORT AND IMPORT memory concept to get my thing done but i m facing problem.
please help what can be done to come up with a solution.
if needed i will provide my codes.
Thanks,
satya

Hi,
Use the get_selected_rows or get_selected_field Methods
Thanks,
Muthu.

Export and Import Computer Groups

Two Monday mornings in a row the Open Directory on our Intel-based Xserve's Mac OS X 10.5.7 Server had failed. This would mean that users who were supposed to have specific access right to folders and share points on other Xserve file servers couldn't get their files or had full access instead of restricted access. The first Monday a restart resolved the issue. The second Monday a restart did not resolve the issue and we opened a case with AppleCare Enterprise Support. We got it up and running again but it failed on Friday during the day. Another call the AppleCare Enterprise Support had me export all my users, user groups, computers and computer groups as a backup.
In the end, I had to do an erase and install of Mac OS X 10.5 server and I updated right to 10.5.8. AppleCare pointed me to the (now Snow Leopard) documentation and told me that now that the server was running and nothing was "broken" and they could not continue to support me. It was up to me to figure out how to restore everything from the documentation. Unfortunately, that document has NOTHING in it about restoring computers or computer groups. It only documents users and user groups. Our user groups were restored with the import of the previously exported list. However, all of the computers in our computer groups appear in the membership list as "Not Found". The preferences/settings for the group were restored but are not being applied to any computers. This means that portable users probably no longer have "mobile" accounts so they can log in off the network and now the Software Update is wide open (although most users are not administrators).
Is there some trick I'm missing to get the computers back into their groups automatically? I can add them manually but I have 400 and can't tell from the list of workstation numbers which are laptops and which are desktops.
-Doug

Hi Tapojyoti,
>>1. Is it correct that "WSUS 3.0 API Samples and Tools" is not supported in WSUS 4.0?
Yes, WSUS 3.0 API Samples and Tools is not supported in Windows Server 2012R2 by default. We may try to rebuild it in Windows Server 2012R2. For detailed information about how the rebuiled, please refer to the readme document of the WSUS 3.0 API Samples
and Tools.
>>2. Is "WSUS 4.0 API Samples and Tools" available?
No, I can't find the WSUS API Samples and Tools for 2012R2.
>>3. Is there any alternative way in WSUS 4.0 to export and import XML file consisting "Computer Groups" and "Patch Approvals" configurations?
As I have mentioned above, due to WSUS 3.0 API Samples and Tools is released with source code, we can try to rebuild it in the Windows Server 2012R2.
If it doesn't work, as a workaround, we can configure the new WSUS server as the replica server of the existing WSUS server. After the synchronization, change the server mode to stand alone.
Best Regards.
Steven Lee
TechNet Community Support

Guide me for exporting and importing data from oracle 10g to oracle 9i

I have been trying export and import options in oracle but m not very clear about the procedure..
Also when i am logging in as Scott/tiger i am facing an error
ORA 1542 - tablespace 'USER' is offline and cannot allocate space in it.how to resolve it

Hello,
I see two questions.
ORA 1542 - tablespace 'USER' is offline and cannot allocate space in it.how to resolve it About the error ORA-01542 you have to bring the Tablespace USERS online:
http://www.error-code.org.uk/view.asp?e=ORACLE-ORA-01542
If you cannot bring it online you may have to Recover it first.
I have been trying export and import options in oracle but m not very clear about the procedure..About the Export in 10g and Import in 9i (9.2 or 9.0.1 ?), you have to export with the Export utility of the Target Database (the lowest Database version here: 9.0.1 or 9.2) then, you have to Import to the Target Database using its Import utility (in 9.0.1 or 9.2).
The following Note of MOS may guide you:
Compatibility Matrix for Export And Import Between Different Oracle Versions [Video] [ID 132904.1]
NB: You cannot use here the DATAPUMP.
Hope this help.
Best regards,
Jean-Valentin

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Howto Export and Import CAF project

Hi,
Is there a way to export and import my CAF projects to more than one installations of NWDS? I've tried different ways but the main problem is that I can't see the "imported" projects in the Composite Application Explorer of the CAF perspective in NWDS.
The only way I've managed to do this is to create a new CAF project with the same name as the one I want to import and copy all files into the newly created structure but surely there must be an easier way to do this, or??
Best regards,
Mikael

Does this solution still apply?
I want to export a CAF project from NWDS 7.10 and import it into NWDS 7.20.
If there are any breaking API-changes, this is no problem as I can fix it later.
However I need to transport all BO and Service-Definitions and the (possibly outdated/deprecated) code.
I cant get it working with your linked document.
Any hint appreciated. Thanks alot!
Kai

Deployment : Exporting and importing a ABAP code to other SAP Server

Similar Messages

Maybe you are looking for