Depot stock updation problem in J1IDEPOTSTOCK1

Dear Experts,
I have done DEPOT to DEPOT STO process.
I have captured goods receipt in the receiving plant without excise values and then posted Excise Invoice with ref to the material document generated in J1IG.
The register RG23D is updated correctly.
When transaction J1IDEPOTSTOCK1 is executed with material number and excise group in selection screen the entry is appearing, but
when I put the receiving plant in the selection screen then not entry is coming.
Also table J_1IRG23D is not updated.
Please advice.

I have already seen that note.
Whenever you post any query in SCN and expects some assistance from members, ensure that you provide as much information as possible which will help the members who are trying to assist you.
When you say that you have the seen the note referred here, you have not indicated this in your original post.  Also you have not mentioned what is the subsequent action from your side, once you gone through that note.  Being an old member of the forum, you should be knowing how to post in SCN
G. Lakshmipathi

Similar Messages

  • Excise duties not updated in goods receipt in depot to depot stock transfer

    Hi,
    I have a problem, while doing goods receipt at depot in the case of depot to depot stock transfer. In the excise invoice tab, I am providing the sending depot's excise invoice number. Then I am facing an error as "Excise invoice doesn't exist in supplying plant.
    How to solve the above, pls give me inputs.
    Regards,
    CS

    Hi,
    Have you set the vendor number in Customer Master and
    customer number in vendor master at the Company Code/Purchase Org level?
    -GShankar

  • Depot to depot stock transfer- capture of original invoice is not happening

    Dear Experts,
    In Depot to depot stock transfer scenario, in J1IJ the depot excise invoice is created with reference to the earlier excise invoice captured at supplying depot but here assessable ( excise base value ) is not updating.
    and  when I refer the J1IJ depot invoice number again in the receiving depot, I am getting an error excise invoice does not exists in supplying plant even though such invoice exists. kindly mention the causes for the same and also please suggest how to rectify the same
    Balu

    s

  • 3rd Party with stock update

    Hi all,
    I am trying to setup proces to track SO through process of purchase.
    Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away.
    I tried to set up automatic Pur.Request out of Sales Order but was unable to do this without account assignment, and thus always ending up creating PO for consumption and skiping stock.
    Can somebody give me some pointers on how should I setup this.

    Yes, I am aware that in 3rd party scenario there is no stock update cos goods are shipped directly to customer from vendor.
    Mine problem is that I have to make process of tracking SO through Purchasing with stock update and I am stuck with creating Pur.Requisition out of SO with account assignment which then triggering GR on SO consumption.
    Is there a way to create Pur.Requisition automaticaly out of SO without account assignment. So that I can procure to stock and still have update document flow in SO.
    Or maybe this is wrong approach and I should take another one.

  • Trouble with opening a 2nd page of Safari and getting Wx or Stock updates?

    My ipod touch says it is connected to internet through my home wifi router and all the items under Settings>wifi seem correct. My windows laptop works correctly on the same router. But when I open Safari on the Touch, the first page of the web site opens but I can not then get beyond that page. That is, if I click on a topic in Yahoo for example, I get the message "Safari can not open page, not connected to the internet". Similarly, I can not get my weather updated or the Stocks updated. I get the message "Update Failed". My Touch works on other networks. Any suggestions?
    Thanks

    I don't recommend using Safari to check your connection. You have some other tools that will let you know what the problem is.
    Tap Settings > WiFi > and then tap the blue > next to your network name. When your touch is connected to your network and your router has issued an IP address, you will see an IP address for the device, a subnet mask address, a router address, and a DNS address or two.
    Most likely you are going to see a device IP of 169.x.x.x, and incomplete subnet mask address and nothing else.
    The most common things to cause this are:
    1. WEP encryption
    2. Old router firmware
    3. You need to reboot your router
    All are fixable. See this article for general troubleshooting help with WiFi: http://support.apple.com/kb/TS1398

  • Open stock updation not performed with MB1C

    Dear Frieds,
    While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
    Regards,
    Gopi

    Hi,
    Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
    Regards,
    Vivek

  • POS DM: Stock updates in SAP Retail

    Hi!
    We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS, and it does not contain any stock information.
    This issue concerns stock updates in SAP Retail using POS DM:
    On the busiest day of year, my client has 347 000 POS transactions in total from all stores, and in one year they have 30 mill POS transactions. My client requires that SAP will provide them with near-realtime information on stock availability, as this is an important way of providing good customer service. The stock information should be available in SAP Enterprise Portal and SAP Retail Store, as well as standard SAP gui transaction. In addition, the webshop (external system) should have as accurate information about stock as possible, at least it should be updated once every 30 minutes.
    My client also has a requirement to be able to create purchase orders during office hours (store opening hours), based on MRP runs. This means they must have as accurate stock levels as possible for running MRP. Stock levels are also used in ATP checks, when deciding whether to pick customer orders from store inventory/stock or to create purchase requisitions.
    All these requirements have led us to believe that the best way to solve this, is alternative A:
    - to update stock continuously during office hours, using WPUBON to create material documents, one for each POS transaction. Sales and tenders will be updated in SAP Retail using WPUUMS and WPUTAB.
    Some challenges this will create:
    a)     It will create 347 000 WPUBONs on the busiest day of year, all within 10-12 open hours.
    b)     If we have same amount of material docs and FI docs, they will use 30% of the available 8 digits within their number ranges per year.
    c)     The idocs will fail if there are article locks simultaneously. (However, this can be handled by updating products only at night time (using batch jobs) and using batch job to handle failed idocs)
    Edited by: Øystein Emhjellen on Jan 4, 2010 2:15 PM

    Alternative B:
    - we have considered to use WPUUMS and WPUTAB, updating stock levels only once a day. The solution we then must use for taking into account actual sales data is described in SAP Note 1088886 - Using the interface for online stock queries. If we choose this, we need to check during the day for each article any sales, to reduce stock in reporting/screens, ATP checks and in MRP runs. We must also create a program to check for articles sold before sending stock data to webshop (external system). (As we do not know which articles have been sold, we must create our own version of RFC - /POSDW/SALES_QUERY_RFC, to enable that the article number does not have to be specified. Rather, the article numbers (and sold quantities) have to be returned to ERP based on what was actually sold.)
    We consider this alternative more risky, due to the need for changing behaviour of standard programs for MRP and ATP check. It will also create a number of RFC calls between SAP ECC and SAP BW.
    My questions on this issue are:
    i)     Will alternative A be preferrable, if hardware requirements are handled?
    ii)     Do you see any additional challenges related to alternative A?
    iii)     Will alternative B be adviceable, concerning the program changes/enhancements involved?
    iv)     Are there standard implementations of SAP ECC, that includes the use of RFC - /POSDW/SALES_QUERY_RFC. I.e. standard programs in SAP ECC that uses the information from this RFC call?
    Thanks for any advice !
    Best regards,
    Oeystein Emhjellen

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • Depot to depot stock transfer process

    Dear Experts,
    We want to do Depot to depot stock transfer, Can any body explain the following 2 processes:
    1. Complete process flow in case of Duty paid depots.
    2. Complete process flow in case of Non-Duty paid depots.
    Please explained this process with tcodes, which are using for this.
    Thanks & Regards,
    Shatrughan

    Please search the forum before you post your questions.This question has been addressed sevaral times earlier.
    Please go through the below link.
    [Re: Process flow of Depots]
    Regards,
    Phani Prasad

  • Last stock update Date Tab not updating in ICH

    Hi Team
    I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
    There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
    Only this Last stock update tab Date are not updating.
    What is the reason behind this?
    Could you please help me to resolve this?
    Regards
    Virendra Kumar
    09769396038

    Hi Virendra
    It is a bug, please report to SAP and get fix
    which version you are using and what is the patch level?
    1341691 should be helpful check out
    Best Regards
    Vinod

  • 10.5.7 update problems

    After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

    jjtopspin wrote:
    Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
    I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
    I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
    I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

  • Cache update problem in Integration Directory

    Hi all,
    We have a cache update problem in our PI development server.
    If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
    We have tried:
    1. Clearing the SLD Data Cache.
    2. Did SXI_CACHE complete refresh.
    3. Did CPA cache refresh.
    4. Did a complete cache refresh of the server.
    5. Restarted the server.
    But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
    Thank you very much.
    regards,
    Jack Nuson

    HI Jack ,
    first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
    Perform a full cache refresh using the URL
    http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
    Regards,
    Saurabh

  • Twitter Update Problem

    Seems I have a Twitter Update problem. 1. I have no pirated software on my computer either from the App Store or anywhere else. 2. I did buy a set off templates for iWork through the App Store with my Bosses Apple ID (it's for work). Is that really the problem. That's ridiculous.  The apple ID is mine, as is much of the software, but it's a computer use for work. If this is true it makes the App Store a lot less useful.

    my apologies I was so annoyed. I didn't bother to state my issue. The issue is: Twitter is constantly asking to be updated. Even after it's updated. Even if it's deleted. I looked at the forums for a solution and found that people were having this problem who installed pirated app store apps.
    I am logged into the app store on my account. All but one of the apps on my machine that come from the app store are on my account. However there is one piece of software on my account that I purchased, by logging out and logging in with her ID, purchasing it, installing and logging out, and again logging in as myself. I don't have an issue with that app. However Twitter, which was installed under my username, constantly says it needs to be updated. Hope that makes it clearer.

Maybe you are looking for