Derivation type missing after transport

Hi
I have a problem with transporting FMDERIVE documentation.
Edit:
in tc: fmderive under derivation strategy "SAP" I have entered some documentation (long text)in an Enhancement derivation type. And added it to a transport.
On the target system the derivation type documentation remain empty after import.
regards
Teddy
Edited by: Teddy Larsen on Nov 26, 2008 3:16 PM

Hi,
You can transport through os lavel and check it.
Regards,
Anil

Similar Messages

ALERTS CLASSIFICATION is missing after transport the ALERTS from dev to QA

Hi Experts!
I have an doubt in Transporting the Alerts Category.
In Development Server we have created a ALERT CLASSIFICATION as PI_ALERTS and under this i am having two ALERT CATEGORY. i have transported the ALERT CATEGORY and Rules. Now in Quality the two ALERT Categories are grouped under ALL CLASSIFICATION and the CLASSIFICATIOON which i created is not there in QA and also my alerts are not working in QA.
Can anyone help to solve this issue.
Thanks in Advance,
Preethi.

Hi!
I have created the alert classification mannually in QA. I have transported the alert rules from DEV to QA.
Now i am getting the mails in the alert inbox but i have used some alert containers but in the mail the value fro the alert container is not displaying.
Can any one give me an idea.
Regard's
Preethi.

DTP error: Type conflict when calling FM - after transport to Prd

Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
ramesh

Hi
Take a look at note 1130907.
Regards,
Chandu.

URGENT help needed:Address data missing after QA Refresh from PRD

All,
Address data for almost all user-ids are missing after QA Refresh from PRD.
In QA, after importing the User-Master although its shows successful. The detailed log shows:
   Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
   Exit program AFTER_IMP_ADDRESS3 successfully executed
   SAP user has no address SAP*
   Error while deleting ADRVP for SAP*
   SAP user has no address SAPCPIC...
   ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
We also do a Table export - import wherein the tables
USR03
USR07
USR09
USR20
USR21
USR30
are included.
The no. of entries exported and imported are same.
Also FYI in the User-master Transport i can see the following Tables included in the object list
USR01
USR02
USR04
USR05
USR06
USR08
USR14
USR21S
USR22
USRACL
USREXTID
USREXTIDH
Has anyone seen this before?
Any body has any ideas?

Hello Bidwan,
I think it is an issue with company address. Just check if company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
Regards.
Ruchit.

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

After transporting the TTF is not been used

Hi all,
I have installed a true type font (se73). After the installation I use it on a smart form style and it is shown ok.
The problem is that after transporting it to integration, the forms are not using the one I installed but a standard instead.
Hints: - all was on the same transport order and it has been transported ok.
- everything is active
- I have allready read the note 421518 and i have executed the report RSTXDELL

Are you checking by print preview only, or by printing?
Which device type is defined for your printer? (SPAD transaction, display the output device)
If the device type is a custom one (Y* or Z*), could you tell us what sapscript (OTF) driver it uses? (SPAD, double-click the device type).
The font conversion algorithm is based on the fonts allowed for each device type (they are called "printer fonts", and are maintained via SE73 transaction). You may verify which font conversion is done via SE73 transaction, choose "printer fonts", double-click the device type, and click the "font conversion" button.
To make sure, you may also see the converted font after the spool has been generated (the font conversion is applied before the spool is generated): display the spool in raw or hexadecimal view in SP01 transaction, the font lines are starting with FT characters followed by the converted printer font name.
Could you tell us what are the results of the font conversion in SE73 for your device type?

Changes in WAD are not reflecting after transport

Moving thread to Business explorer
Thank you
Edited by: YJV on Dec 22, 2009 2:09 PM

I just remembered a similar problem we had with reports. Changes weren't visible after transport, however, when we opened the report and saved it in the report designer, the changes were visible. It had something to do with authorisations, most users missed the authorisation to 'generate' the report which was needed after transport. Maybe you can try opening the template with a SAP_ALL user or something on production to see if it's related (or test again on QAS with a new template and a user with limited authorisations.
Kind regards,
Alex

Pricing Routine is not getting called after transport to quality

Hello,
We have created a new routine under Condition base value formulas. We have done all the required settings so that it is called while creating / changing sales order. Our routine is working fine in Development server but after transporting it to quality it is not getting called. We can see the routine in VOFM but in debugging mode the system is not able to find the routine.
Can anybody please tell me what setting is missing in quality?
Thanks in Advance.
Priyanka.

HI,
Pls ececute this report RV80HGEN in SE38 tcode then only the routine will works for first time.
Regards,
kishore.

Infospoke inactive after transport

Experts,
In version 3.5, I have created an infospoke with transformation and unit tested in Dev box. After transport I have got an error 8 while importing in QA. I checked all objects if anything missing or inactive in dev box related with this transport. But could not find anything.
Looking into QA, I noticed infospoke was in revised version. Do you have any suggestions about what could be missing in transport? Or what should be the next possible steps to resolve the issue, please. Thanks.
Regards,
Nimesh
Message was edited by:
Nimesh Patel

Hi Anil, I am having the same problem. My ABAP routine puts the correct selection variables, but the infospoke is getting into 'Revised' version. Can you please let me know, if you have a fix for this?
Thanks,
Naveen

*REC Error - missing ) after argument list

Hi all,
Please note the following code
*XDIM_MEMBERSET P_ACCOUNT = 50100010.FOB.FC
*XDIM_MEMBERSET P_PCA = <ALL>
*XDIM_MEMBERSET P_CUSTOMER = P_DUMMY
*XDIM_MEMBERSET P_MONTH AS %DUMMY_MONTH%= 2011_DUMMY_MONTH
*XDIM_MEMBERSET P_MONTH AS %MONTHS% = BAS(2011.TOTAL)
*XDIM_MEMBERSET P_BUDGET_MODEL AS %BUDGET_MODELS% = BAS(2011.TOTAL)
*XDIM_MEMBERSET P_VERSION AS %VERSION% = 10
*LOOKUP COLMOBIL01
*DIM P_CURR_FROM="%P_BUDGET_MODEL%.CURR_FOB"
*DIM P_EXCH_RATE_TYPE="%P_BUDGET_MODEL%.EXCH_RATE_FOB"
*DIM P_CURR_TO="ILS"
*DIM P_ACCOUNT="P_DUMMY"
*DIM P_PCA="9999999999"
*DIM MEASURES="PERIODIC"
*FOR %S_MONTH% = %MONTHS%
*DIM LK_%S_MONTH%:P_MONTH="%S_MONTH%"
*NEXT
*ENDLOOKUP
*WHEN P_ACCOUNT
*IS 50100010.FOB.FC
*FOR %S_MODEL% = %BUDGET_MODELS%
*FOR %S_MONTH% = %MONTHS%
*REC(EXPRESSION=%VALUE%*LOOKUP(LK_%S_MONTH%), P_ACCOUNT=50100010.FOB.ILS)
*NEXT
*NEXT
*ENDWHEN
When I validate it, I receive a message:
LINE 0 syntax error: " missing ) after argument list"
When I delete the *REC line, the validation is OK.
Any idea why do I get this message?

Hi Gersh,
I am sorry if I have not been lear. The script passed validation. The "." is not in the name of the variable but in the values of the dimension. My Budget models IDs were YYYY.MODEL1. I have an attribute called MODEL_NOYEAR, which includes the characters to the right of the ".". When I used it and only inside the LOOKUP added the year it worked fine.
My Time dimension has the same issue, It is defined as YYYY.MM. Again, in your last proposed script, you have cycled over a property, which only includes the period number. This gave me the idea.
I know that the REC needs the ( without spaces. Took me one night to find this out....:(
Now, after I have passed validation a new challenge arrived.
Basically each Budget Model has 2 properties. One is the Exchange Rate Type and the other is the currency of purchase. The LOOKUP should be accessing another application based on the Month and the two properties of the model.
It suddenly struck me that the script is not good since the lookup is not bringing the values.
I have tried the following versions:
1. Straight forward version - use the name of the propery of the calling dimension. Did not work.
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = P_BUDGET_MODEL.CURR_FOB
2. Use the value of the calling dimension "." the propery name. Did not work
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = 2011_%SMDL%.CURR_FOB
3. I have created a variable that should hold the value and then used it. Did not work.
*LOOKUP COLMOBIL01
*DIM P_CURR_TO="ILS"
*DIM P_ACCOUNT="P_DUMMY"
*DIM P_PCA="9999999999"
*DIM MEASURES="PERIODIC"
*FOR %SMDL% = %BUDGET_MODELS%
*FOR %SMNTH% = %MONTHS%
*DIM L_%SMDL%_%SMNTH%:P_CURR_FROM = %CF%
*DIM L_%SMDL%_%SMNTH%:P_EXCH_RATE_TYPE = %ERF%
*DIM L_%SMDL%_%SMNTH%:P_MONTH="%BY%.%SMNTH%"
*NEXT
*NEXT
*ENDLOOKUP
*WHEN P_ACCOUNT
*IS 50100010.FOB.FC
*FOR %SMDL% = %BUDGET_MODELS%
*FOR %SMNTH% = %MONTHS%
*SELECT(%CF%, CURR_FOB, P_BUDGET_MODEL, "ID = 2011_%SMDL%")
*SELECT(%ERF%, EXCH_RATE_FOB, P_BUDGET_MODEL, "ID = 2011_%SMDL%")
*BEGIN
*REC(EXPRESSION=%VALUE%*LOOKUP(L_%SMDL%_%SMNTH%), P_ACCOUNT=50100010.FOB.ILS)
*END
*NEXT
*NEXT
*ENDWHEN
I can not escape the feeling that somehow I do not understand the way the BPC is handling the data and how and when it calculates variables and defines them.
Any idea how do I perform the lookup based on the property values?
Thanks,
Avihay

Transport type when copying transports to other system

Hello,
probably a simple question. I have to transport couple transports from one system to another, there is no link between the systems.
I have created one (mass) transport which include objects of these transports, but I am not sure what type of the transport should I choose (transport of copies, relocations (it is not clear to me)), also I do not want to release the one big transport to Q systems transport queue. I just want it to create the cofiles to move to other system.
So question will be how to copy this one transport (via cofile, data file), or if it is possible to release transport without target system?
Thanks in advance
Martin

Hi,
Please ensure that STMS is configured in your system, since it is a stand alone system you can make it as a Domain Controller also. After that goto transaction se10 and check for the transaction which are in modifiable state. Then relese the transport starting from the inner request corresponding the transport request created by you.
Note that once you release this trasaction data files and cofiles are created in trans directory, and you have to manullay copy these files to the system in which you want to transport these files.
After that goto transaction stms_impot in the target system and add this transport request and import it. the data in the transport reuest will qutomatically gets imported the.
Thanks
Rattandeep

BPM error after transport

hi all,
i get the following error after transport on Q system:
"No object type found for this message; check the activation of the corresponding process"
the trace gives me this explanation:
"could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
So what else can i do to fix that bug?
Thanks
Stefan

HI,
Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
Also check the status of check table in quality. Is it active?
All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
If nothing works then include all the objects in another TR and transport. make sure all are active.
Thanks,
Vinod.

ADOBE FM not exist after transport

Hi dears,
I'm facing to a problem with an adobe form transport.
In dev, adobe works fine. I've transported the adobe in acceptance, after the transport, I test the adobe.
Transaction sfp, test button.
So I reach the initial screen of FM module. The FM is called /1BCDWB/SM00000007 and when I execute it, I've a dump. It's say:
Short text
    The function module is not active or contains no code.
What happened?
    The function module "/1BCDWB/SM00000007" is called, but
    cannot be found in its function group.
    Error in the ABAP Application Program
    The current ABAP program "/1BCDWB/SM00000007============FT" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
I know that with smartforms sometimes we need to regenerate the SF after transport with the option in the menu generate.
I go in form object menu Form Object (first one) and choose generate.
I've the information message (in green):
Unable to find include '/1BCDWB/LSM00000007U01
and the FM is not yet avaible
In dev this manipulation generate works fine but not needed.
Su53 in acceptance is ok last authorization wheck was successful and adobe in acceptance (the form and interface with sfp) are ok.
Any help is welcome
Thx in advance
Vincent

Hi Vincent,
Similar to SMARTFORMS in adobe forms also the FM have a different name in different systems.
So wherever you are writing the code to call your adobe form call FM: FP_FUNCTION_MODULE_NAME and get the fm name from there, replace your FM /1BCDWB/SM00000007 with the variable in which you are getting your Forms FM name.
For example:
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = <Your form name>
    IMPORTING
      e_funcname = lv_funcname.
CALL FUNCTION lv_funcname
    EXPORTING
      git_item       = git_item
      gs_header      = gs_header
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Vaibhav

Mail missing after Rebuild

Hi All,
Having problem with the Mail.app
All my mails were missing after I ran the rebuild function.
I think the old mails were somehow hidden from the inbox as i noticed the the size of inbox.mbox is 1.22GB, whereas the latest INBOX is only 240mb.
How do I bring back all my old mails?
Mail.app v 1.3.11
OS 10.3.9
Many thanks.
Cheers

Hi mercuryfin.
I'm sorry you've been left out in the cold. For some reason your post has gone by unnoticed, maybe because there are many threads discussing problems similar to the one you're having. Read the following article (and the articles it links to) to better understand the problem and how to fix it:
http://discussions.apple.com/thread.jspa?threadID=121837
Unfortunately, one of the side effects of trying to fix your problem as suggested in the article is that a lot of previously "deleted" messages may reappear and you'll have to delete them again. If you wish, we can try a slight variation of the procedure described there to see whether that side effect could be avoided -- I haven't tried it before, but it won't cause any data loss, at worst it'll just not work and we'll have to do what the article suggests.
Let me know if you need any clarifications or want to try the alternative approach I'm suggesting. If the latter, start by quitting Mail and, in the Finder, go to HOME/Library/Mail/. Locate the folder of the account that contains the largest Inbox -- its name starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. Open the account folder, locate the file INBOX.mbox, right-click or ctrl-click on it and choose Show Package Contents. Now, choose Edit > Select All (⌘A), then Edit > Copy (⌘C) and paste it in your reply to this post so that I can see which items are within that mailbox. Tell me also the size of the mbox file that appears there.

Change of technical name after transport

I found some of the technical names of dtp's are changed after transport from development system to quality and not all dtps names are changed..
Is there any specific reason that some dtps technical names are changed after transport and some not changed?
And there are any more proceess type that change when they are transported ?
Thanks
vamsi

Hai thats correct techincal name of DTP's change after successful transport from dev - quality or any instance for that matter .Its quiet normal in BI 7 infact a bug which we too found intially .
Goodday.
Edited by: SapBuddy on Oct 7, 2008 7:19 PM

Derivation type missing after transport

Similar Messages

Maybe you are looking for