Descriptions are not being exported even though option is ticked

This is a new problem for me. Not sure when it cropped up, but possibly in the last iPhoto update?
When I export a photo from my library and tick the 'Titles and Keywords' box, the description field is not copied into the IPTC caption field as it used to be. The title and keywords are, but when I look at the info panel in Finder (or in Preview), the description field remains set to "SONY DSC" which is the camera's default.
I'm running iPhoto 9.4.1 on OSX10.8.2
Is this a bug? Is anyone else having this problem? Any insights appreciated.

I fixed all my exported photos with missing IPTC data using this command:
exiftool -iptc:all= -tagsfromfile @ -all:all -unsafe ./
Download the exiftool here: http://www.sno.phy.queensu.ca/~phil/exiftool/
open a terminal window, cd into the directory with all the exported photos, then run the exiftool command.
voila! the descriptions re-appear.
if iPhoto can create new descriptions, regardless of what camera they were taken on, then iPhoto should also be able to export them. And, this is why i'll never use iPhoto again.

Similar Messages

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

TS3276 incoming messages are not shown automatically even though in 'preferences' i have set to check every minute. I have to click the mail icon to see new messages. phil

incoming mail does not appear automatically even though preferences is set to check for new mail every minute

If by download bar you are referring to the spinning gears, they are gone in Mail 6.5. There is no indication Mail is checking for Mail. If it finds Mail, it will show it downloading in the lower left hand corner.
Under the Window menu there is Activity. Try opening it and you should be able to see if Mail is checking for new mail.

Schedule lines are not getting confirmed even though stock is there

HI,
i want to discuiss one sensitive issues which is a simple one.
my schedule lines is not getting confirmed even stock is there at sales order.
there is no delivery block.
there is no minimum stock level.
there is no credit check for that.
there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
even i checked all the dates.............but its of no use.
what to do ?
after testing all the possible options i am taking help from
please help me in this regard,
regards,
balajit

Hi
you need to check the following.....
First check the Factory calander of your plant whethear some holidays or not
Second most importantly you have to check which stretagy group is assigned in the material . whethear it is make to order or make to stock. change it as make to stock.
"What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
Regards
Shambhu Sarkar

I cannot sign into facetime. It says my id or password are not correct. Even though I can sign into Itunes just fine.

Having problems signing into Facetime on ipod touch. Everytime I try it says I don't have the correct user ID or password. But, they work fine to sign in for Itunes. HELP!

I had this problem too. As it turns out, when you first sign in to FaceTime, it saves that password. If you have changed your Apple ID account password since the first time you used FaceTime on your device, it will reject that password, even though it is right. Basically, FaceTime thinks it needs the original password. This means that you will have to restore. If you haven't changed your password though, I am not sure.

HT3820 once registered, the "pro" features are not turned on even though the "Pro" appears on the Quicktime icon.

After downloading quicktime 7, I entered the registration code. The "pro" appeared on the quicktime logo and the "buy QT Pro" button went away however the pro features are not "on" or usable.

After downloading quicktime 7, I entered the registration code. The "pro" appeared on the quicktime logo and the "buy QT Pro" button went away however the pro features are not "on" or usable.
Did you open/load a file to the app? The "Pro" features are context adaptive and only "turn on" if content is both available and the feature can be applied to the particular type of content loaded.

Rescue email not being sent even though it is valid :/

read title^ says 'Check your inbox for an email with instructions on how to reset your security information' but nothing.... zzz

You've checked the spam folder on the account and tried clicking the reset link again ? If you still don't receive it then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

Sharing photos by email - Emails are not being received

My photos which I have shared by email are not being received, even though I have a confirmation that they have been sent (one photo has been sent).
I am using a @me.com email address and I have tried to send a photo to myself and this has still not been come through.

Do you have iPhoto setup to email the photos itself or use Mail to email the photos?
Happy Holidays

FI documents generated from RE-FX are not being summarized

The Fi documents generated from periodic posting in RE-FX are not being summarize, even thou the have the same customer, the same flow type and account determination.
I checked the corresponding customizing Item related and the seem to be right. The system seems to be skiping this.
I have 2 conditions in the RE contract that goes to the same flow type and account determination but the document is generated with the two separated line item.
Tanks in advance
Noel.

Hi Noel,
I guess you have already checked your customizing.
If you are technically interested you may have a look into the
coding to see which fields are checked and must be equal for
summarization.
class: CL_RERA_DOC_ITEM_CNDS
method: CONDENSE_APAR_ITEMS
If you set a breakpoint there and follow the program you may see why the items are not condensed.
Regards, Franz

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options.

My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

F.05 - why the entries are being reversed even though I did not tick the

Hi,
Please advice why the entries are being reversed even though I did not tick the reversal button in F.05.
Your assitance is very much appreciated.

Hi,
It is a standard SAP procedure by which the revaluation entries are automatically reversed. If you do not want to reverse the revaluation entries, you will have to Activate Delat Logic for the Valuation Area. SPRO Path is Financial Accounting (New)--> General Ledger Accounting (New) > Periodic Processing> Valuate --> Activate Delta Logic.
Once you activate this Delta Logic, at the time of fc valuation, you will get the check box for Annual or Mid Term revalation will come. If you select the annual option, the automatic reversal will not happen.
Regards,
Amit

DHCP Option Tags are not being applied...

Hi,
About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment. The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from. Same
applies to the WDM Server as well. The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.
DHCP Servers:
vlan41
10.40.1.206
10.40.1.207
Test Client:
vlan46 - ip helpers defined on the switch
Set to receive the same ip address from the DHCP server through the reservation route.
Option Tags:
186 - WDM Server - 10.40.1.184
195 - WCM Server - 10.40.1.185
196 - WCM Path - /
I've installed Wire Shark on the test client to monitor the DHCP activity. The above custom options tags are not being pushed on to the client.
The Router, DNS Server and Domain Tags are being pushed. So it's working but also not working????!!!
Anybody with some insight to this problem?

Hi hpaul_p
In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft. To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
a DHCP server. Same results!!! I'm really running out of time, so my work around is this: I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server. I've disabled the auto
discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent. Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent.
I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order: 1. SRV 2.DNS (A record)
3.DHCP (Options), I bet it's the same with WDM. Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem. This is all I have have. Steven Song I've forwarded you the
DHCP database, if you find any problems with it please let me know.

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Cookies are not being cleared when I close the browser although the option is set. Any suggestions?

Under Options; Privacy I have Clear history when Firefox closes ticked and within the Settings for Clearing History I have Cookies ticked. Cookies are not being cleared when I close the browser. Windows 7, SP1 x64

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Descriptions are not being exported even though option is ticked

Similar Messages

Maybe you are looking for