Desktop not starting up

Once I switch on my CPU I can see my CPU green light flashes for a second and goes off and there is no signal to monitor. I can still see that my computer fans are still working and my mouse lights are on. Can it be the problem with CMOS battery?

Here are a few suggestions:
Mini-Tutorial: Ejecting media in Mac OS X: Removing 'stuck' CDs/DVDs
PowerPC-based Macintosh: How to eject a disc when other options don't work
Ejecting a CD or DVD when all else fails
Ejecting a disc from the PowerBook G4 disc drive
And a free utility to do it, too:
Force Eject 1.0: Free Download
cornelius

Similar Messages

CTI toolkit Agent desktop not starting

Hi
I have recently installed a CTI toolkit agent desktop in my PC but it is not starting and is giving error
"Cisco Desktop client has stpped working"
This is the first time i installed this application in my computer running windows7 64 bit.
the version of cti toolkit is 8.0.1
what should i look for ??

Two things come to mind. First make sure you have the latest version, 8.0.1 doesn't sound like the latest one. Next, make sure you install it as administrator.
david

Multi-label desktops not starting (Solaris 10u9)

I'm attempting to create a multi-label trusted JDS desktop setup, where each workspace is tied to a specific label, which is in turn associated with a specific zone. I'm starting out simple and just creating one label and one non-global zone. I'm able to have the zone autoboot, use "smc" to associate the zone with the label, and set a workspace to that particular label. However, the desktop does not show up in that workspace. All I get is a background with the color that I've assigned to that particular label.
I can start nautilus manually from within the zone after setting DISPLAY to ":0.0", and the desktop will show up in the workspace. However the desktop running in the global zone seems to use the same configuration files as the non-global zone (i.e. if I change the background in one workspace, the other changes as well). I'm also unable to use "gnome-panel" to run any apps in the non-global zone from the Launch menu.
I'm using Solaris 10u9. Seems like there is something rudimentary and simple that I'm missing. I've been at this for way too long and it's driving me nuts. Thanks for the help!

Answers to your questions:
What zonename and label did you use for your non-global zone?test
Can you cat'n'paste your /etc/security/tsol/tnzonecfg ?global:ADMIN_LOW:1:111/tcp;111/udp;515/tcp;631/tcp;2049/tcp;6000-6003/tcp:6000-6003/tcp
test:0x000a-08-:1::
Do you get the question about which level to use when you login? Yes. I'm logging in as root, which is at the ADMIN_HIGH level.
What rights does the user you are logging in with have in /etc/user_attr ?root::::auths=solaris.*,solaris.grant;profiles=Web Console Management,All;lock_after_retries=no;min_label=admin_low;clearance=admin_high
Lastly, did you edit /etc/security/tsol/label_encodings and verified that the zones are up and running properly?Yes, I've modified the label_encodings file as follows:
VERSION= MLS Configuration
ClASSIFICATIONS:
name= TEST; sname= T; value= 10;
INFORMATION LABELS:
WORDS:
REQUIRED COMBINATIONS:
COMBINATION CONSTRAINTS:
SENSITIVITY LABELS:
WORDS:
REQUIRED COMBINATIONS:
COMBINATION CONSTRAINTS:
CLEARANCES:
WORDS:
REQUIRED COMBINATIONS:
COMBINATION CONSTRAINTS:
CHANNELS:
WORDS:
PRINTER BANNERS:
WORDS:
ACCREDITATION RANGE:
classification= t; all compartment combinations valid;
minimum clearance= t;
minimum sensitivity label= t;
minimum protect as classification= t;
LOCAL DEFINITIONS:
Classification Name= Class;
Compartments Name= Comp;
Default User Sensitivity Label= t;
Default User Clearance= t;
COLOR NAMES:
label= Admin_Low; color= #bdbdbd;
label= t; color= red;
label= Admin_High; color= #636363;
Thanks for the response!

How to fix -In Windows 8.1, Firefox seems to revert to desktop not Start page, when it is closed.

Windows 8 seems to be running on two systems - the desktop (which is just like windows 7), and the start page. Is there a way to integrate Firefox into the start page system? It does open it, but closes out the the desktop. (We are longtime Firefox users, and don't want to use IE, so will just work around it, but it just seems a little disjointed.)

I don't know whether this is a Firefox-specific problem or a problem with "traditional" Windows apps in general. Do other programs you start from the desktop close and display the Start page the way you prefer?

Hp p6000 desktop not starting power supply...?

I have a solid green light on the power supply but the fan does not come on. (nothing but the green light comes on) The start up button flickers briefly when pressed but only after being unplugged and only once until it is unplugged again. I have gone though the hp trouble shooting page. Any help would be greatly appreciated.

As you did not define the model number (just a reference to the HP p6000 series) I had to guess it was the stock 300W used in several of the models.
It the green light is 'on' with applied voltage, but goes out when the computers power switch is depressed, that usually means the power supply has failed. Open the case, and repeat the sequence, noting the PSU light, motherboard LED, and watch the CPU fan. Now, press the computer power switch. Did the CPU fan turn briefly? If the CPU fan quit, and the motherboard LED is now off, I again would suspect the PSU.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

One note starts on its own when I use Remote Desktop connection

Whenever I use RDC to connect to my home server, One note start and pops up totally on its own on my local computer.
Can anyone explain why, and more importantly how I can stop this behaviour?

After hours of reading through forums and posts similar to this one, and knowing the proposed work-arounds were not going to be accepted by my client that was having the issue, I came to the conclusion that it had to be a print driver or the software that
gets installed along with the print driver on the server that was causing my issue.
I started searching and came across some Epson software that was installed on the remote desktop server when I was trying to get a scale house ticket printer to work as a network printer. The printer was not installed on the server but the software remained
in the add and remove programs list.
I removed the three Epson entries in the add and remove programs list and the problem stopped.
I don't know if this was mentioned above but the behavior I observed was that the print job was going to multiple printers, not just OneNote. I my case if I removed the OneNote pritner I would then get prompted by the Microsoft XPS Document Writer for a
file location to save to.
I could open the print queue for each of the printers that were getting redirected on my local machine, I would then log in to the remote desktop server that I was having the issue on. I could see the "remote desktop redirected printer doc" get
sent to each printer. If the printer was online it would flash for only a moment and the printer would ignore the job as if nothing had been sent to it. If the printer was offline the job would stay in the queue.
I think this was mentioned above so I will reiterate, don't approach the issue like it is a problem just with OneNote or with a particular driver from a particular manufacturer. We know at the very least that the problem can be caused by Samsung driver/printer
software and by Epson driver/printer software so it stands to reason that there can be other drivers/printer software packages that can cause the same problems.
I hope this helps!

VDI - RemoteApp does not start in "Virtual machine-based desktop deployment" environment

Hello dear community,
I would like to familiarize myself to the subject of desktop virtualization and have built up a test environment for this purpose. Most went smoothly, but now I'm trying for days to figure out, why the deployed RemoteApp programs in my test environment not
start. Unfortunately posts here and in other blogs were not helpful. I hope you can point me to the right direction. :)
My environment
Server 1
Windows Server 2012 R2 Std with the roles
   AD DS,
   DNS,
   DHCP
Server 2
Windows Server 2012 R2 Std with the roles
   Hyper-V,
   Remote Desktop Services (Connection Broker, Virtualization Host, Web Access),
   IIS
VMs
Windows 8.1
RD Client 1
Laptop with Windows 7 and Internet Explorer 9, Firefox 28, RemoteApp and Desktop Connections
RD client 2
iPad with Microsoft Remote Desktop App
Setting up the environment
The installation of the environment I made as mentioned in the following blog post. http://blog.itvce.com/?p=1569 But with only two physical servers.
What does work?
Prepared with SysPrep and "cloned" Windows 8.1 VMs created in the collections of virtual desktops are accessible via WebAccess (RDWeb) using IE, FF, Windows Start menu and also from the iPad as a complete desktop for authorized users/groups. The VMs
wake up in Hyper- V from the saved state and roll back to it after the user logs off. So far so good.
What does not work?
Now to what does not work. One collection of virtual desktops I have reserved for the publication of RemoteApp programs. So this new collection - like the above - was created. The VMs were built and successfully registered in AD. Then I used "publish RemoteApp
Programs" wizard in the collection. The available programs were successfully read from the VM. WordPad, Calc and Paint I used for the test. The programs/apps will then appear in RDWeb.
In RDWeb I now click on the Calculator, the warning described in many blogs appears that resources are passed through and then that the certificate could not be verified. Although I have already added the certificate to the trusted root CA in the user and the
computer area, I acknowledge that I would like to connect despite the certificate error with "Yes".
After about 20 seconds the "Connect to ..." window disappears and that it was. In Hyper-V Manager the corresponding VM does not move even if it's running. If the VM was not running and in saved state, it is at least started. But the Calculator will
still not start.
Can anyone give me a proper hint what to do, which Bing, Google and Technet did not have?
Thank you in advance!
Kay
PS: Since I am from Germany, I have asked the question first in the German forum. Unfortunately, without success.

Hi Kay,
Thank you for contacting Microsoft.
From your description, I learnt that the issue you are experiencing is that you want to eliminate the certificate warning when launching the Remote App applications. Please let me know if I misunderstand your purpose.
Firstly, please let me know what certificate you are using. Then please export and import the certificate on the RDSH server. We need to manage the certificates. Please refer to
the steps below.
1. Open the Collections which you want to manage, click
Edit Deployment Properties.
2. On the Certificates page, select
Select existing certificate.
3. When the
Select Existing Certificate page appear, please select Choose a different certificate, locate to the right exported certificate path, and type the correct password, and
select Allow the certificate to be added to the Trusted Root Certification Authorities certificate store on the destination computers.
4. Repeat steps 2 and 3 to finish the certificate configuration, here we can use the same certificate.
If anything unclear, please feel free to let me know.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My start Volume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. what can i do to come to the Desktop?

My Startvolume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. What can i do to come to the Desktop?

What do you mean by you "cleaned" it?
Try booting into Safe Mode: http://support.apple.com/kb/HT1564
If you can boot into Safe Mode, try clearing off some space while booted there.

Lightroom cc does not start. logout and login in creative cloud does not help. Have a test account, 2 days more to go (and want to decide whether to buy PS & LR CC or to stay with current desktop solutions.)

I installed lightroom cc. But it did not start. Tried the solution, that seemed to help many others (logout, login) but it did not help. Even did logout, restartet pc (win 8.1, 64) and logged in again. tried to log out and log in in the cloud panel and in photoshop cc. nothing helped.
Maybe it has to do with the fact, that i have a test account and only 2 more days to go? but i need to launch lightroom cc first before i can decide to purchase CC.

Thanks for your reply. I was able to find help through a tech support chat session and the person helped me edit my /etc/hosts file and it solved the problem.
For anyone else experiencing this issue (Mac OS X):
Close all other programs and sign out from the Adobe Desktop App
From the Finder, Go > Go to Folder...
Type /etc and hit enter
Find "hosts" file (only "hosts", there were similar files such as hosts.config but only open the one that says "hosts"
Open the file, and replace the entire content with ### Host Database## localhost is used to configure the loopback interface#
Close the file, sign back into the Adobe Desktop App
Problem solved!

MacBook Pro can turn on and off, but does not start up. Stays on white screen with flashing folder icon, does not go to desktop.

MacBook Pro is not starting up. It just stays on a white screen with a flashing folder icon. Have tried restarting while holding the Option key, and the cursor becomes visible and movable, but it does not go to the desktop.

Hello Sonya_Rose,
I found this article when researching the issue you describe here named A flashing question mark appears when you start your Mac found http://support.apple.com/kb/ts1440.
Check the mouse and keyboard
This issue might occur if a mouse or trackpad button is pressed during startup. Make sure the button isn't pressed.
If the issue persists, shut down your Mac with its power button, disconnect any external mouse and keyboard, then turn on your Mac with its power button. If the flashing question mark issue persists, reconnect the keyboard and mouse.
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.
Regards,
Sterling

I keep getting the message "ipod cannot be used because the apple mobile device servies is not started" message when I try to sync my itouch to my itunes library from desktop computer

I keep getting the message "iod cannot be used because the apple mobile device service is not started" when i try to sync my ipod to my desktop itunes library.

See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer

I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer. This usually works fine, so I don't know what I did to keep it form working.

Are you using Windows? This tells you how to restart the AMDS for Windows.
http://support.apple.com/kb/ts1567

Desktop Software does not start - really not at all

Hi everybody,
I hope this is not a common problem...
I installed the latest version of DM (710_b033_multilanguage) successfully on my PC.
Win7 (64bit), 8GB Ram, plenty of Diskspace and sufficient Video HW
As mentioned the installation was successfully.
When I start immediately a windows error message pops up, telling me the the Blackberry Desktop Manager does not work anymore (translated from the original German popup) and that Windows is looking for a solution. Sure enough Windows does not find anything and the window disappears without further notification.
I tried
- reinatalling
- repairing
- installing on SSD as well as on standard HDD
- searching the blog on "not start"
- cussing
- and now posting
Can anybody help - please?
Cheers
T

Thanks :-)
but unfortunately it did not work - still the same error:
Cheers
Thomas

Desktop not starting up

Similar Messages

Maybe you are looking for