Destination Storage Unit in FM L_TO_CREATE_MOVE_SU

Hi everyboday,
I'm using the FM L_TO_CREATE_MOVE_SU in order to create transfer order for moving storage units. I need to set the "Destination Storage Unit" but I cant find these field in he FM. I just have the i_lenum field which is the "Origin Storage Unit". Please your help! Thnks
Luis G.

Hi
Try adding below exception in exception part :
Error_message = 99 "it can be any number"
Hope it helps.

Similar Messages

Destination storage unit number on LT03

Hi friends,
When we create a transfer order, we need to fill "Destination storage unit number" (LTAP-NLENR), with a value from delivery (we manage the "Destination storage unit number" with external number range).
Have you any information how to do this?
Please help me
Thanks & Regards
Alessandro

I had the following response from SAP Service:
Unfortunately, the documentation of Enhancement MWMTO01 in SMOD clearly
says:
The user exit in the program is function module EXIT_SAPLL03T_001. In
order to be able to use the user exit, you must create Include ZXLTOU01
and activate the enhancement with transaction CMOD. As parameters, you
can use the TO header (import parameter I_LTAK_VB) and the items (table
parameter T_LTAP_VB). All database changes due to the transfer order
have already been performed. The transfer order is created.
With this user exit, you can update your own tables or trigger follow-upactions. Although changes made to table T_LTAP_VB do not have any
effect, they should still not be made.
Customer enhancement MWMTO003 is available for customer-specific stock
placement strategies though you should check carefully whether it meets
your exact needs. The enhancement is documented in transaction SMOD.
This could be used to determine specific SUs into which addition to
stock should take place but if you want to assign NEW SU numbers during
putaway then this is not possible in the standard.
Sorry I cannot provide you with a better answer. However I hope the
above information is useful to you. If you have no further queries,
kindly confirm the message at your earliest convenience.

Destination storage unit should come automatically

Hi All,
I have created process order and released the same, staging also completed successfully.
when Iam trying to create a TO for TR, destination storage unit is not coming automatically.
we have a requirement it should come automatically.
can u please help me out.
Kuber

Hi,
Yes....It is SU managed only, still i am unable to get Dest SU automatically.
Please advice on this.
Regards,
Kuber

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

R/3 request storage unit during TO confirmation

Dear all,
I bump into an obstacle while perform TO confirmation.
During TO confirnmation, there is one screen requesting me to key in the storage unit.
I tried to put in some of the storage unit from the the search screen (i.e. the little round shape next to the field), but system don't allow.
May I know how to handle this?
Do I need to create a new storage unit and put in to this field during TO confirmation?
thanks
tuff

Dear Sinéad, and other,
Ok this is how I bump into the error (in between, my WM knowledge has not reach the Storage Unit yet).
I have created a TO for picking from a delivery order via VL02N's menu screen (i.e. movement type 601). Next, I perform a TO confirmation in LT12, and when I click the "Confirm Internally" button, R/3 jumps to this screen requesting the following two data:
1- Storage unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Storage unit 00157032650003548391 does not exist Message no. L3209">>
2- Destination Storage Unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Target handling unit 157032650000046104 is not assigned to TO 0000353991 Message no. L3822">>
I just don't know how to proceed now as without the confirmation there is no picking (i.e. as the actual quantity field in the LT12 screen still empty) and there is a problem on PGI later on my delivery.
Please teach me how to proceed when encounter above obstacles.
thanks
tuff

WM-storage unit number issue

Hi
Storage unit number is not generate in the transfer order .i made configuration for storage unit. But storage unit number is not
trigger in transfer order.
pls send me steps for configuratioin. ihave to check where i missed the configuration steps
with regards
dinesh
Edited by: code acess on Aug 18, 2011 5:25 AM

Hi ,
follow the below Process to Activate SU
First make your warehouse SUM active. Set your individual st types as SUM active and SUT check active
Active SUM for the storage types where material is to be putaway as well as removal, Storage unit configuration in LE -WM-Storage units- for master data. Maintain these storage types in storage type search to find the bins for putway & picking.
When you post GR in IM and the System will create the Transfer requirement .
Using The TR to converting into TO creating to the destination Storage unit bin.

Same Storage Unit number for both source & destination storage bin

Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciated

Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin:

Problems when creating a transfer order for moving storage units

Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John Nijburg

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Storage Unit Date

Dear Experts
Please advice which exit / badi / enhancement can be used to derive the same / orginal storage unit date in case when we transfer stocks from one storage location to other.
when the stocks are transfered from one Sloc - WM location to other Sloc WM location, the system consumes the orginal storage unit in the source location and creates new storage unit in the destination location. due to this the ageing of the item in the destination storage bin becomes new and the system does not consider the orginal storage unit number
Can you please help me find a solution for this since the ageing report is being developed and derived from BI
Thanks

closed

How the storage unit get populated automatically in TO during GR?

Hi,
I have a question to ask you with regards to SU in WM.
I perform a goods receipt against a production order in MIGO.
and I notice the Transfer Requirement get created and the Transfer Order also get created automatically in the background.
My question is the system also automatically assign a storage unit in the transfer order (LTAP-NLENR), may I know what system configuration is requre to setup such automatic SU created for the TO, where in SPRO?
In between this is a "Bulk Storage" Strategy used in this storage type.
thanks
tuff

If your destination storage type is SU managed and you have an internal number range assigned then system will automatically propose the the SU number (trhe next number from the number range)

TO Error: Source HU ******* is not contained in Source storage unit *******

Dear All,
Our warehouse Handling Unit managed. I have created a delivery which is partially picked.
After that when I am trying to create Transfer Order, I am getting an error "*Source HU ******* is not contained in Source storage unit ******"
I am getting a pop up window in the name of "Enter withdrawal of Handling Units", and it is asking me to enter the Quantity to be repacked.
I am getting this error only when I am doing Partial picking.
How to get rid of this error. Kindly suggest.
Regards,
Mullairaja
Edited by: MullaiRaja on May 26, 2011 10:47 AM

Hello
This can be the whole pallet have to be withdrawn from the source (flag LTAP-HOMVE is set on, 'X'), but HU picking control does not propose the source HU as the destination HU (flag LTAP-HUPIK is clear, ' '). Kindly check.
If that is not the case then, for your reference refer following SAP notes:
- 662020:      Processing of TO with different storage types
- 514604:      Storage unit is not deleted when posting goods issue
- 721901:      Errors LF-064, L3-848 while picking w/o pick-HU
- 552073:      Message L3222 when creating transfer order with LT09
- 505542:      Incomplete TO confirmation in Transaction LT0H & LT0I
Thanks & Regards
JP

L_TO_CREATE_SINGLE - new storage unit is not created by SAP

Hello Friends,
I am using a FM L_TO_CREATE_SINGLE to create transfer order.
But, When I am not passing Destination SU as import parameter, it gives me following error.
"Storage unit XXXXXXX is not consistent with other transfer order data"
This is happening in ECC 6.0. Earlier i was using ECC 5.0 and there was no problem.
How can I get rid out of this problem?
Regards,
RH

Hi,
Check the long text of the message.
It clearly says that
"Data in the transfer order item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered."
So check to see if the storage unit number you entered is correct.
This seems to be a data issue.
Regards,
Ankur Parab

Issue with Storage Unit Type (LETYP) in L_TO_CREATE_TR

Hi Experts,
I need help in the function module "L_TO_CREATE_TR". using in Warehouse Management(WM) module.
In theis function module I am passing LETYP(Storage Unit Type) value in IT_TRITE parameter, but this is not considering my value instead of this it is considering the value which is coming based on Source Storage type.
Can any one aware of this issue ?
Please let me know.
Thanks & Regards,
Chandu

Hi,
Pass the Storage type details to NLTYP/ VLTYP. For destination storage details NLTYP and NLPLA. For Souce storage details VLTYP and VLPLA.
No need to pass to LETYP value.
" Pass these values
            ls_trite-tbpos      =     "Transfer Requirement
            ls_trite-nltyp      =      "Destination storage type
            ls_trite-nlpla      =      "Destination storage bin
            ls_trite-anfme      =     "Quantity
            ls_trite-vltyp      =     "Source storage type
            ls_trite-vlpla      =    "Source storage bin
            ls_trite-altme      =    "Unit of measurement
            APPEND ls_trite TO lt_trite.
CALL FUNCTION 'L_TO_CREATE_TR'
            EXPORTING
              i_lgnum                  = "Warehouse
              i_tbnum                  = "Transfer Requirement
              i_update_task            = 'X'
              i_commit_work            = 'X'
              it_trite                = lt_trite
This will create a TO w.r.t TR
Regards,
Karuna

WM Replenishment and 2-step picking with storage units.

Dear Colleagues,
I am attempting to use SAP standard fixed bin replenishment and implement it as a 2-step picking process. Generally, the process goes as follows:
- Generate replenishment pick tasks
- Place the picked products onto storage units in an intermediate storage type
- Put the products away from storage units into the respective fixed bins
I have setup the necessary parameters to get standard replenishment to work. I can run LP21 and generate all TR's, and subsequently TO's. The product moves from respective reserve bins into the fixed bins based on strategies that I have setup.
The issue i am experiencing is when I try to introduce the intermediate storage type to place the product into, before it goes into the fixed bins. Additionally, the intermediate storage type needs to have SUM enabled, so that the product gets placed onto pallets. This way, the warehouse personnel will be able to track the physical product movements before it is put away.
Any help in this matter would be greatly appreciated.
Best Regards,
HK
Edited by: Husein Kadribegic on Aug 4, 2009 6:49 PM

Hi,
I'm not sure your scenario is viable in (standard) SAP.
As I understand (e.g.):
- source storage type: productA 10 pc, productB 20 pcs, productC 30 pc
- intermediate storage type: SU1 (productA 2 pc, productB 17 pcs, productC 10 pc), SU2 (productA 8 pc, productB 3 pcs, productC 20 pc)
- destination storage type: bin1: productA 2 pc, productB 17 pcs, productC 10 pc, bin2: productA 8 pc, productB 3 pcs, productC 20 pc
Please notice that SAP determines the to be removed quantities (~corresponding to SU1 & SU2 but not as SUs) when you remove the goods from the intermediate storage type ("allocation") and not when you place the goods into it.
Please also notice that automatically you cannot create storage units (palletize) with different products on it (I'm not sure this is requirement in your case or not).
Please check this link where it is explained where to carry out customizing for 2-step picking and how it works:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Aug 6, 2009 7:01 AM

Create transfer order for moving storage units

Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Destination Storage Unit in FM L_TO_CREATE_MOVE_SU

Similar Messages

Maybe you are looking for