Detailed documentation of statistic-events?

Hi experts,
I'm looking for a detailed documentation and explaination of the statistic-events that can be found in the BEx-statistic-workbook.
Especially I'm interested in the event "Bytes transfered" which can be subdivided refering to the objects "RSR_NET_BUFFER", "RSR_NET_INTERFACE", "RSR_NET_RESULTSET_GET_S".
Futheron I'd like to know what the events "Before/After Renderer", "Loading local WB", "serialize data" and "Not assigned" stand for. What happens in this steps?
Thanks in advance,
kind regards,
Marco Simon

Hi Thomas,
The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
Regards,
Patrick

Similar Messages

CS5 has stopped working pop up everytime when selecting fonts. details: Problem signature:   Problem Event Name:APPCRASH   Application Name:Illustrator.exe   Application Version:15.1.0.39   Application Timestamp:4d76c9e3   Fault Module Name:CoolType.dll

Stops responding, etc
details
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Illustrator.exe
Application Version:    15.1.0.39
Application Timestamp:    4d76c9e3
Fault Module Name:    CoolType.dll
Fault Module Version:    5.7.83.9418
Fault Module Timestamp:    4c296b69
Exception Code:    c0000005
Exception Offset:    00021ae1
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    8e1b
Additional Information 2:    8e1b636bd3438ac15d03ef1549553b25
Additional Information 3:    1b31
Additional Information 4:    1b316dab8b65bf468124c367b4a50e14

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

Power Shell script to send a email with event details when an specified event occur

I want a power shell scrip to send a email to a specific email id with the event details when an specified event triggered. The default option to trigger the email on event occur is failed.

Why is everybody now saying "I want, I want, I want"
Can you say what is happening? Can you post a script with a line that is failing? No! All you want is a free script.
Start by learning how to script. Try at least to write a simple "hello World" script. Until then you cannot post here.
¯\_(ツ)_/¯

Detailed Documentation on APIs in Oracle HRMS

Hi,
I'm interfacing data into Oracle HRMS. Once the data from the flat files is put into the Intermedeate tables, the API and Data pump need to be run.
Could anybody tell me where I could find detailed documentation about
1)the HRMS API's,
2)the Data pump and
3)which API handles which table's data?
please put the link in this post or mail it into this account:
[email protected]
Thanks in Advance
KP

You can refer metalink site and use eTRM site for best information on APIs
giridharan d
[email protected]

IN IMG, I couldt see details documentations about particular area.

hI
when I m IN IMG, I couldt see details documentations about particular area.
ex. when under Asset accounting goes for valuation and want to see document for valuation? I do click left side document Icon and nothing happen?
could any one guide me how to activate this to view documentation?
thanx in advance
Bobby

Hi Attila,
there are demos available on the SAP Service Marketplace (http://service.sap.com/healthcare-tutorials) that will give you a good impression of the key capabilities of SAP for Healthcare.
If you are particularly interested in the industry-specific solutions SAP Patient Management and SAP Ambulatory Care Management, the documentation is available in the SAP Help Portal (direct link: http://help.sap.com/saphelp_erp2005vp/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm)
Best regards,
Katharina

More detailed documentation of the data upload page set ?

Hallo,
Is there more detailed documentation available of the Upload Wizard and Data Set definitions?
In particular:
Is there a way to skip the Data Mapping part by providing a locally pre-recorded definition of the selected columns and their format, so this step can be skipped for the end user.
The predefined regions: "Data / Table Mapping - Data Upload Column Mapping" is not very transparent.
The bottom line is that I would like to skip this step completely, still leveraging the built in APEX capabilities.
Regards,
- Thomas
Edited by: t-o-b on 17.04.2012 08:29

Hi Thomas,
The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
Regards,
Patrick

Detailed Documentation for Interactive Forms

Hi,
I need a detailed documentation about Interactive Forms and how to use the transaction sfp
Thanks.
Regards,
Muhammad

Hi,
Did you check the Home page for Adobe products :
https://www.sdn.sap.com/irj/sdn/adobe
In particular, I would go to the SAP Help :
http://help.sap.com/saphelp_nw04s/helpdata/en/cc/05c27f53ad430688f8a95f1c0c79db/frameset.htm
Best regards,
Guillaume

Detailed documentation on architecure.

Where Can I get documentation on Rights Management Architecure? I am particularly keen about security keys are handled during RMS workflow.
In AD RMS I can find detailed documentation about various certificates used and flow of various keys during encryption and decryption cycle. Also details
of deployment in clusters.
I want to know where can I get similar kind of documentation on LiveCycle rights management.
Regards,
Sharang

Sharang
I'm not sure if this document ( http://help.adobe.com/en_US/livecycle/9.0/services.pdf ) is detailed enough (see page 42), but it does have some info regarding how documents are secured with Rights Management.
Regards
Steve

Detailed Documentation on Multi-providers

Hi,
Does anyone know where to fnd detailed documentation on Multi-providers ?
If no documentation available, can anyone recommend a book that explains how multi-providers behave in different design situations ?
Cheers

Hi Achin,
here is your document:
www.service.sap.com/bw->SAP BW InfoIndex->MultiProviders->MultiProviders (incl. Slow Moving Item Scenario) 3.0B SP07 (Docu Enhancement) (pdf)
following this link you can find also info about Multi-Cubes and Partitioning
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700008401002000E
If you want some more info give me your e-mail address (cause I'm not finding these docs on line with a path..)
Hope it helps (and please don't forget to assign some points by clickin'on the star to the contributors that helped you !!!)
Bye,
Roberto

IDoc Detailed documentation

Dear Friends,
I need the detailed documentation on IDocs and ALE pertaining to SD module.

Hi
http://www.sapmaterial.com/idoc_sample.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d

Is there any documentation on widget events in iBooks?

I've seen very little detail on how to use edge published widgets in iBooks. The widget creation process is straightforward, but using them in an iBook is problematic. I have been testing the following work-flow:
Export from Edge Animate to Widget
Use iBooks Author to import the Widget
Copy the book to an iPad via iTunes and test
I've been using widgets created from the edge lessons to test this workflow. So far I've discovered:
Widgets work more reliably if copied to the iPad though iTunes rather than by previewing them in iBooks Author.
It's important to supply a poster image of the same size as the widget stage as this appears to determine the size the widget will be displayed.
It's important to add touch events explicitly rather than click events.
Problems remain however which I feel could be solved by creating javascript which responds to whatever events iBooks generates when opening and closing widgets. I can find no Edge documentation on this. Widgets published by the above simple workflow may work briefly, but stop working after a few pages are turned. Once widgets stop working - that's it. The only way to recover is to close the iBooks app and reopen it.
Maybe this is a question for Apple, but I feel some pointers in the Edge documentation might help here.
I have for example found this thread that talks about special widget opening events: https://discussions.apple.com/thread/3696472?start=0&tstart=0
There are some useful Apple docs here with sections on widget events.
http://developer.apple.com/library/mac/#documentation/AppleApplications/Conceptual/Dashboa rd_ProgTopics/Introduction/Introduction.html#//apple_ref/doc/uid/TP40003042-SW1
All good stuff, but it raises other questions like how to use some of the Apple provided widget libraries in an Edge widget? What code should be inserted to prevent the widget freezes that I see? Maybe a better workflow would be to develop in Dashcode, and add Edge Animations to the html of a DashCode maintained widget?
Mike

I don't know of any documentation off hand... but what are you trying to do? I haven't needed to to make a connection using the DriverClass....
If you aren't using dynamicSQL... you can just catalog the database, and make direct sql calls (not recommended)... but if you catalog it, then just an INSERT command works... or UPDATE... etc
logMessage "Starting insert."
INSERT INTO MYTABLE(id, name) VALUES ("2", "kevin");
logMessage "Finished insert."Check out the studio help under SQL Keywords for more info on that...
HTH
-Kevin

How to return a specific date/time range and last event details, when checking the event log via command prompt

I am new to scripting (literally started reading/learning scripting a few hours ago), and I am stuck in trying to get my current script/command to filter a specific date range.
* Note: I am working with Server 2003 and 2008; because of the environment I am in, a lot of scripts (such as Powershell and VBScript) don't work; trying to stick with command line, as it appears to be the only thing that functions correctly in my environment
I am trying to search the System log in event viewer, for the most recent server reboot. Here is the command that I am currently running:
===========================================================
C:\Windows\System32\cscript C:\Windows\System32\eventquery.vbs /L System /FI "id eq 1074"
===========================================================
When run, the output looks like this:
===========================================================
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved
Listing the events in 'system' log of host 'xxxxxxxxxxxxxxx'
Type Event
Date Time Source
Information 1074
12/18/2013 2:48:06 AM USER32
Information 1074
11/20/2013 3:25:04 AM USER32
Information 1074
10/23/2013 2:06:09 AM USER32
===========================================================
What I would like it to do is only show events that have happened in the last seven days, as well as show the event details if it does find an event that matches the criteria.
Any help would be greatly appreciated. Thanks!
Nick

I would prefer using Powershell , you can use below code
function Get-EventViewer
param(
[string[]]$ComputerName = $ENV:COMPUTERNAME,[string]$LogName,[int]$eventid
$Object =@()
foreach ($Computer in $ComputerName)
$ApplicationEvents = get-eventlog -logname $LogName -cn $computer -after (Get-Date).AddDays(-7) | ?{$_.eventid -eq "$eventid" }
foreach ($event in $ApplicationEvents) {
$Object += New-Object -Type PSObject -Property @{
ComputerName = $Computer.ToUpper();
TimeGenerated = $event.TimeGenerated;
EntryType = $event.EntryType;
Source = $event.Source;
Message = $event.Message;
$column1 = @{expression="ComputerName"; width=12; label="ComputerName"; alignment="left"}
$column2 = @{expression="TimeGenerated"; width=22; label="TimeGenerated"; alignment="left"}
$column3 = @{expression="EntryType"; width=10; label="EntryType"; alignment="left"}
$column4 = @{expression="Source"; width=15; label="Source"; alignment="left"}
$column5 = @{expression="Message"; width=100; label="Message"; alignment="left"}
$Object|format-table $column1, $column2, $column3 ,$column4 ,$column5
$Object.GetEnumerator() | Out-GridView -Title "Event Viewer"
You can do a function call like
Get-EventViewer -LogName system -ComputerName "computername" -eventid "2017"

Reason and details for Deactivation of Event linkage in Production

Hi Friends,
Recently I have come across Event deactivation For AP invoice, Vendor Creation and Customer Creation workflows in Production, I have checked further and found that those are set as deactivate event linkage as default system behavior.
So that mean when ever an error will occur while event triggering then linkage will be disabled by the system.
Correct me if I am wrong.
So friends, my big doubt her is that What all are can be the reasons for that system error?
*And How I can get details for those errors? *
Regards
Dev

Hi,
While defining the Event linkage in SWETYPV ->
When ever u click on Business object it will open one new window ->
In that window -> There are four options to define in the field
Behaviour upon Error Feedback -> system defaults
                                                  Deactivation of linkage
                                                  Mark linkage as having errors
                                                  Do not change linkage
if the linkage is not activated as per the syatem defaults ( when ever error occurs)
You need to specify the type as -> Do not change linkage
Please check the four options once u will come to know the difference.
And also please check the following link
[http://mailman.mit.edu/pipermail/sap-wug/2004-October/014617.html]
Edited by: vijayareddy on Jun 1, 2009 11:56 AM

Item Details iView and Custom Event

Dear experts,
I need to implement a custom validation using a BAPI call to external R/3 system.
I am planning to use the Item Details custom event as a trigger for my custom web dynpro and have my BAPI call there. My question is, can I do that? The reason I'm asking is because the event says it's a post-save-event. What I need to do is to prevent the actual Saving and display an error message if the
BAPI call returns "false".
Thanks for your help,
Boris

I see that there are too many answers to this thread
OK, here is how we solved the issue. We are subscribing in a custom Web Dynpro to the Post-save-event of the Item Details iView and we are performing the BAPI call.
Based on the result of the call we are setting a flag on the record and this flag is used as a syndication block.
Hope that helps someone ...
Boris

Function or BAPI for Resource Detail Selection on Bussiness Event

Hello,
I want to do a initial data load of Business Events (TEM). I need to load its resources in a detail form (dates and hours when resource is used by this business event). Does anybody knows any BAPI, function or class that load data in this detail form?.
I just want to replicated how works PSV2 (or PV10) transaction when you push the resource selection button, select the resource type and a detailed selection but as funtion or BAPI.
Regards,

HI Zafar,
How did you resolve this issue??
We are working on the same issue, could you please share the possible solution with us.
Thanks,
Adi.

Detailed documentation of statistic-events?

Similar Messages

Maybe you are looking for