Determine if CF 7 Updater Installed?

We are running CF7 Standard on a Windows 2003 environment.
I thought I had installed the CF 7 Updater, but now I am not
sure. I looked at the online references and I can get a specific
indication.
What should I look for to make this determination? My current
version is: 7,0,1,116466
Thanks.

That means that you are updated to 7.01

Similar Messages

  • An update installed using DISM in install.wim seen as "Not Applicable" by WSUS report instead of "Installed"

    Hi all,
    To make server's installation faster, I intend to make an updated "install.wim" every 6 months using DISM.
    Then, after installation, the Win2012R2 server connect to a WSUS server to get the latests update not included in the install.wim.
    As a test, I used DISM to install an update in the install.wim file of Windows 2012R2 sources.
    In a new installed Windows server 2012R2, I can see that the KB is installed.
    But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
    Is it because WSUS did not installed it itself ?
    Is there a way to display it as "installed" in the report, even if the patch had not been installed by the WSUS server ?
    Thanks
    ML

    But on the WSUS report of this server, the status of the KB included in the install.wim by DISM displayed as "Not applicable".
    Very possible, and likely.
    It depends on how the detection logic of the update has been written. In some cases, detection logic is based on what an installer does during installation, e.g. create and/or set a registry key or value. This may not happen when injecting an update into
    an image using DISM. As a result, the detection logic will not see the necessary flags it's looking for to determine that an update is "Installed" vs "Not Applicable".
    You also have to think of this in terms of the baseline image installed on the system. To be true, a baseline image that already has the necessary content is, in fact, "Not Applicable", and has, in fact, not actually been installed to that machine.
    Most often you see this in the realm of installing images with slipstreamed service packs.
    Consider a scenario with a slipstreamed Win7SP1 baseline. Functionally speaking, all previous updates are contained within that SP1 baseline, but if you inspect the state of the actual updates in WSUS, they will all be listed as Not Applicable. They're not
    actually "installed", and they cannot be installed, thus the only viable remaining state is "Not Applicable", which is true -- because they cannot be installed on an SP1-based machine. (Functionally they are superseded, which is also a
    contributing factor to the state of "Not Applicable".)
    There is no way to display it as "Installed". It's not. This is something that should be documented in the declaration of the baseline image you're using (by patching up the image with DISM once every six months).
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Update installed but not recognized

    I have a numeric  alert (1)  for an update in App store. For Aperture.
    Yet the information stated I have Installed it. It is greyed out.
    I can't get rid of this annoying notification. I sign out/in.
    restart Mac.
    open close Aperture.
    but it persists.
    Why?

    This is an annoying and regularly arising nuisance.   It really is time Apple did something about it.
    I've mislaid the thread link but Dah*veed wrote recently to offer the following solution.    Hope he won't mind me repeating it.
    'You could try reindexing your HDD.   The MAS uses the Spotlight indexing in determining what apps need updating.   Go to Systems Preferences / Spotlight/ Privacy; add your Hdd to the list then remove it from the list.   Spotlight will then reindex your HDD.'

  • Software Updates Installed - SCCM reports and WMI show as missing

    I have a few clients (Windows 2003 Server SP2)  that have installed patches via SCCM Deployment.  Reports show the patches are missing.  Registry shows the updates installed.  Add/Remove Programs shows it installed as well.  KB log file also shows it installed.  After digging further I find that in WMI the patches still show as missing.  I am looking in root\ccm\softwareupdates\updatesstore and I see that the patches show as missing.  I tried deleting the entry and rescanning, it comes back but still shows as missing.  We have installed the patches both manually and via SCCM. No difference.  Any ideas?

    Yes, I know this is an old post, I’m just trying to clean them up.
    If the SU are show as missing you need to look at the SU scan data to determine why it thinks that the SU are missing. Just because the data is listed with ARP does NOT mean that the SU has been applied properly. The SU super
    Superflow can help with track this issue down.
    http://www.microsoft.com/en-us/download/details.aspx?id=4443
    BTW here are the rest of the CM Superflows.
    http://search.microsoft.com/en-us/DownloadResults.aspx?q=Superflow
    http://www.enhansoft.com/

  • Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days.

    Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days". This is also the case with HP Printer Software update 3.0 and Digital Camera RAW Compatibility Update 6.03. Clicking the "update" button for these doesn't appear to install the software, but lists it in the "Updates Installed in Last 30 Days" without removing it from the Software Update queue.

    Thank you. I tried that and even gave it a few days to do its thing, but I still get the same results. Remote Desktop, HP Printer, Digital Camera all still appear in "Available Updates", but the same versions appear under "Updates Installed in the Last 30 Days". BTW, I had to manually install the Safari 8.0.4 update because it also wasn't updating.

  • 1.1.3 update installed, but cant customize home screen

    I updated an iPod touch, and I confirmed in Settings > General > About, that it is running Version 1.1.3.
    However, holding my finger down on a home-screen icon for an extended period of time does not put it into customize mode the way it does on my iPhone.
    I also noticed that in Safari, when I hit the + plus sign, it does not give me the option to Add to HomeScreen.
    But I am 100% sure the update installed and is running. I even have an option in settings >
    General > Reset, to "Reset Home Screen Layout"
    Now this update was installed from my Mac. But the iPod touch belongs to a friend and I do not want to register to my itunes, etc. I do have a back-up of their iPod Touch on in my iTunes, so I assume that I can do a restore and she wont loose all her songs and videos. After that I can try to apply the update again. Should this work? Are there any steps I should be aware of. I think the weird thing I am doing is trying to update the software from a computer (my macbook) that is not the same computer the iTouch usually syncs with. But I have done this with other peoples iPhones before and never had a probelm.
    any advice would be much appreciated.

    In addition to installing the firmware version 1.1.3 you must purchase a licence to unlock the software upgrade code.
    See [Installing and verifying the iPod touch January Software Upgrade|http://docs.info.apple.com/article.html?artnum=307243] for more info.

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • HT202159 An error occurred in the App Store. Try again later(13)..I wait for months!!! please help me! Can't download or update, install and buy!  iMac 2008, OS X Lion 10.7.4 (11E53).

    An error occurred in the App Store. Try again later(13)
    Can't download or update, install and buy!
    I wait for months!!! please help me!
    <Email Edited by Host>

    Disable anti virus software.
    Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
    If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    ~/Library/Caches/com.apple.appstore/Cache.db
    Click Go
    Move the Cache.db file to the Trash.
    Now here:
    ~/Library/Preferences
    Click Go
    Move these files from the Preferences folder to the Trash.
    com.apple.appstore.plist
    com.apple.storeagent.pllist
    Now here:
    ~/Library/Cookies
    Click Go
    Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Empty the Trash, try the App Store.

  • Got new update, instaled on my home server 2008, as I had the previous version. Now with the new Itunes my home sharring is ot working when it use to work fine on the older version

    Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

    Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my Laptop  on  windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

  • ITunes 6 won't open - automatic update install problem???

    Hello,
    I have tried to install iTunes for the first time using the latest version and when I try to open it nothing happens. I have XP and I believe the automatic update install shield is blocking the installation of the program?? I do not have norton anti-virus and I have turned off the automatic update install in the control panel.
    Thanks,

    hi Guido!
    I have tried to install iTunes for the first time using the latest version and when I try to open it nothing happens.
    replying to you here rather than off in your other post. (let's stay in this thread.)
    off in that other post, you described seeing a little yellow shield in your task bar. is that a Norton live update notification, or a Windows update notification? (i've seen it in my task bar too, but i can't recall off-hand which one of those it's signifying.)
    love, b

  • Itunes stops working after update install

    Anyone have the issue where itunes stops working post the latest update install? Ive even uninstalled itunes and attempted to reinstall and it doesnt work

    Hey Rockettman23,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. I also understand that you have already attempted to reinstall iTunes. You can use the steps in this resource to further isolate the issue to user-specific or system-wide:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Downloaded update installed, but won't go away!

    Greetings.
    I recently downloaded a batch of software updates, including the SuperDrive Firmware Update 2.1.
    All updates installed perfectly, including the Superdrive update.
    Now, each time I start the Mac, the update seems to be trying to install again. A disc icon appears in the doc, and a message box pops up saying something like 'update cannot be installed'.
    How do I convince it to go away?
    Thank you for any advice you may have.
    Best regards.

    Open the Accounts pane of System Preferences and remove it from the list of login items for your account.
    (22760)

  • IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

    iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

         If they have set up port forwarding for you already then that is different.  In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients.  It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer.  I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
         I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
    The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
    First:
    ssh ipaddress -l adminusername
    (example: ssh 192.168.1.1 -l macadmin)
    Second:
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
    After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

  • My iPhone 5 won't update/install apps !! Any idea why ?

    I own an iPhone 5, an iPhone 4s and an iPad 2.
    They are all not jailbroken and are all running on ios 6.0.1
    While my iPhone 4s and iPad 2 have no problem updating existing apps or installing new apps, my iPhone 5 won't update/install apps all !!
    To be fair, about 2 week ago, all my iPhone 5 update/install won't work but after a day or two, they started downloading.
    But now, my iPhone 5 updates and installations have been stalled for a week.
    What is happening ? Can anybody please help ? Thanks.

    Okay fixed it:
    First of all make a backup and sync your iPhone in iTunes.
    Next reinstall your iPhone using DFU mode:
    (FIND HOW 2 GET IN DFU MODE ON GOOGLE, APPLE DO NOT ALLOW TO PUT IN LINKS HERE :-( )
    Then choose to put your latest backup back on your iPhone.
    And voila you should see you now can recieve updates from App Store.
    (It worked for me)

  • Used windows update, installed 8 updates, FireFox does not display some websites and images correctly.

    Hello,
    Windows update installed 8 updates to my computer and now several websites are not displaying images or text correctly. Some forum looks like they were loaded in an extreme basic mode, another forum main page looks fine but sub forums are loaded in in the same basic looking mode, another forum only displayed 1 user avatar out of hundreds.
    Chat/IRC clients wont load.
    Everything works when I used IE.
    I tried to follow the help thingies but was led to a dead link.
    http://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%24%20can
    Anybody have any ideas?

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Maybe you are looking for