Develop presets stopped working

Having just aquired LR4.1, I was going through the various develop presets to see the various effects available. It took several clicks to open one of the folders, when open I was able to preview the colour effects and preview. I shut down that folder, and was not able to open any other folders, let alone the folder I just used. I managed to import the presets into a folder, view them, close the folder, and again unable to open the folder I just previewed. I am using Win 7 64-bit.

Since these are 3rd party presets you had better contact the manufacturer of these presets.
Since the Lr presets are working fine, this is most probably not a Lr issue.
But before going the - probably frustrating - way of contacting the 3rd party manufactureres, I'd try to un-install and re-install these presets - not Lr!

Similar Messages

My Iris Preset stopped working and I don't know how to fix it. Help?

My Iris Preset stopped working and I don't know how to fix it.It worked on one picture and now it isn't working anymore. I cannot figure out why. Google failed me.

This may occur if you are connected to the Internet and iTunes is trying to connect to the iTunes Store and fails for some unknown reason.
Try this:
Quit iTunes and disconnect completely from the Internet.
IF you have an iPhone (iPod etc), open iTunes. Sync the device.
Re-enable your Internet connection.
Quit iTunes.
Open iTunes again.
If this does not work, try completely uninstalling iTunes, then reinstall it according to these instructions:
http://www.apple.com/support/iphone/assistant/itunes/#section_6

Brush Presets stopped working.

While I was working on an image, my brush presets stopped functioning. Attempts to re-load/replace/etc have not worked. I receive an error message stating, "Could not load the brushes “M Brushes.abr” because the file is not compatible with this version of Photoshop." This is not possible, as I've been using these brushes in some cases for many years, and certainly on the image I was just working on.
Can someone help me get them working again? I have rebooted/started/stopped Photoshop several times to no avail.
Mac OS 10.7.5, PS CS6

Good day!
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)
Regards,
Pfaffenbichler

Select "Develop" and "Lightroom has stopped working"

First off I'm new to Lightroom. I moved up from Elements.
I upgraded to 3.4 and now when I select "develop" Lightroom stops working.
Any ideas?
I'm running windows 7 home 64 bit all updates are current.
I have a small ssd for a hard drive and therefore removed the old 3.2 directory after the upgrade.
I have 6gig of memory and an AMD quad core phenom II 3.4GHz.
I have an Nvidia Gforce GT 430 graphics card driver version 270.61

From the application event log.
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe Photoshop Lightroom 64-bit because of this error.
Program: Adobe Photoshop Lightroom 64-bit
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0

Sliders stop working after 20 minutes

Lightroom sliders in the Develop module stop working all of a sudden after 30 minutes I'm using Lightroom. The other fuctions work but sliders don't. Every time I have to restart Lightroom. Don't know why this happen (I noticed it especially happens when I'm using the HSL sliders)

Hi,
I'm not sure why there isnt a "sticky" on this subject but I read far enough back in the threads to come up with this solution.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1040
If you are configured with a dynamic IP as I am, then following those instructions to clone your MAC address should solve the problem. In any case please let us know what your solution, if any was.
Hope this helps,
jhw

Merge to HDR Pro from LR5. After applying preset and during conversion of file, Iget an error message "Adobe Photoshop CC 2014 has stopped working" and closing PS

In LR5 i do: Merge to HDR Pro. After I apply my preset and PS attempts to convert HDR file, I get an error message from PS: "Adobe Photoshop CC 2014 has stopped working". Then PS Closes.
My source files are 5 NEF files of 28 MB. I select 16-bit, I also tried 8-bit. No difference. Same error message.
I have a Toshiba Quosmio X870 with Intel i7 3610QM @ 2,30 GHz, 16 GB RAM, Windows 7x64 HP SP 1, 7,3 Performance Index
Any suggestions?

As the crash report says - your outdated video card driver is crashing. You need to update your video card driver from the GPU maker's website (AMD/ATI in this case).

My wife just bought her first Iphone a 4s a fwe months ago, its secondhand a few months ago but it came with ios7. Now the phone has stopped working and is asking to be registered with a Developer Program portal any ideas how I can fix this for her?

my wife just boughtnher first apple an iphone4s she got it secondhand about last july , it came with ios7 which had not been released but today its stopped working and asking to be registered with a developers program, how can I restore her phone and hopefullykeep her current data. Please keep your answer simple we are not it people thanks.

Well, you have your answer perhaps as to why the phone was being sold in the first place - rather than being a registered developer, the previous owner probably downloaded and installed an illegal copy of iOS 7 beta on the phone and it has now bricked the phone. Some people did this and of course they could not wait to get their hands on iOS 7, but now it has been released officially, everybody moans.
The only thing you can do is try resetting the phone again. Connect it to iTunes and install iOS 7.0.2 and restore it as new and see if that works. This might help the phone but will not preserve data.
If it still won't work, then I suggest that you confront the previous owner of the phone and return it for a full refund and start again, but this time buy the phone from a legitimate source.

64 Bit has stopped working, when adding presets

I have added Lightroom to a new laptop and my presets that I purchased which were sent though an email on a file will now not add to Lightroom, I keep getting the message 64 bit has stopped working.
This is for all the brushes, like smooth skin, whiten teeth ect.
Its a 4.4 Lightroom 64 bit.
Please help!

Can you provide the exact wording of the error message, please?

The Develop Module in Lightroom 5 stopped working.

Hello,
The Develop module in Lightroom 5 stopped working. It is greyed out. The Library module works on the left side but the editing function on the right is also in operative.
Can anyone help me with this?

Mac Cmd/1
Windows Ctrl/1
OR
Right-click on one of the other panel headers (Tone Curve, Detail, etc.) and make sure there is a checkmark in Basic.

Dbx for Forte Developer 6 on SunOS 5.10 suddenly stopped working

I know this is the forum for Sun Studio but it was the closest I could find to answer the question. If there is one for Forte Developer, please point me to that.
The problem I have is that last week dbx suddenly stopped working for me. I would try to lauch it and it would just hang and be unable to be killed with kill -9.
I've asked my sys admins to look into the issue but haven't gotten a response yet so I thought I'd try here.
I have some truss output but I can't post it here because of length issues. If somebody wants it, I can send it to them.
Thanks,
Madison

Forte Developer 6 is part of the Sun Studio family, so you have found the right forum. :-)
FD6 is End Of Service Life, and no support has been available for it since 2006.
In addition, it is not supported for use on Solaris 10. If it was working previously, it was only by accident.
You should get Sun Studio 12, the current release, or wait a few weeks and get Sun Studio 12 udpate 1. It is free for all uses, does not use a runtime license (only a license agreement), supports modern hardware and operating systems, compiles faster, produces code that runs faster, has much better support for C++ (and supports C99), has a greatly improved debugger and has other new development tools.
You can get the current Sun Studio here:
[http://developers.sun.com/sunstudio/]
... and the current patches for it here:
[http://developers.sun.com/sunstudio/downloads/patches/index.jsp]
The Support Matrix shows what OS versions are supported by the various Sun Studio releases, and the lifetime of each.
[http://developers.sun.com/sunstudio/support/matrix/index.jsp]

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Safari stops working. Mail won't work with Safari running. Now iTunes can't find my phone. If I restart and do one thing at a time it helps but still not reliable. All software on my iMac is up to date.

I have a new iMac and iPhone 4.0. All software is up to date and I have installed the free beta version of Mountain Lion which let me use iChat on my computer. Safari intermittently stops working. Mail won't access my mailboxes if Safari is running. Now iTunes won't find my iPhone when it's locked and in a dock charging. If I restart I can do 1 thing at a time, but I can't have Safari running and use Mail. I've emptied my cache, checked my passwords. It's none of that. By process of elimination, there is some kind of conflict between using multiple applications on the Internet at the same time. Sometimes after I've gone to several Internet sites Safari will stop working properly even though all other applications have been "quit".

Oops. You installed the beta Mountain Lion on your main hard disk? Usually most people install it on a secondary or external hard drive. Your situation should actually be posted on the Developer web site for Moutnain Lion and not here. All I can suggest here is to run repair permissions and restart. Sorry.

Windows 7 - browser stops working still connected

As the title says Windows 7, browser stops working after some time passes.
This effects IE and Chrome. I can still ping www.google.com or it's IP address. (all other computers on the network are fine)
I've used both the wired and wireless connection without the same results.
I reboot and it works, I walk away from the work station and then boom no browsing.
I've turned off the firewall, released and renewed the IP, netsh winsock reset none off this worked.
I've gone into internet options and ensure that no "proxy' boxes are checked.
I've uninstalled the network card drives and restarted the machine.
I've ran Malwarebytes (no infections), ccleaner to check for registry problems. Nothing there.
I've disabled the power saving options and uncheck "let windows turn this device off"
I've also ran Norton and Mcgafee uninstallers just be sure there aren't any residue from those installed.
No bittorrent clients
So I'm online but can't browse on this one computer? what's the deal please Help!

ctrl+alt+del to display the tasksmanager...Processes tab,
any google processes running? googletoolbarupdater.exe (x86 or x64)?
any other suspicious/unknown processes running? see why not to use ccleaner on win7 machines http://forums.steampowered.com/forums/archive/index.php/t-971768.html spybot S&D installed? turn off 'Teatimer' Tools>Internet Options>Security tab, click "Reset all
zones to default".... there are security zone settings for meta refresh. running IE in noAddons mode is the first test (close all open IE windows first, if using IE8 reboot your computer to clear any hidden IE crash recovery processes or use the taskmanager
to kill any orphaned IE processes) Start>Control Panel>Sharing and Networking>run the diagnose connection problems tool to diagnose network connection issues. IE9....f12 to display the developer tool>Networking tab, click "Start Capturing"..... to trace network
requests and responses. IE8 and earlier.... download fiddler from http://fiddlertool.com HTH
Rob^_^
also Tools>ActiveX filtering (enable/disable) google.com injects an ActiveX 'object' (googletoolbar.dll) that tracks your search and surfing history, in their search and results pages.

StarWalk compass stopped working with their most recent update.

My favorite application on my iPad used to be Starwalk. Ever since their most recent update on April 30, the internal compass stopped working (which is basically the backbone of the entire app). I contacted Vito technology (the developer) - it took a long time to get a response, but after several efforts they finally replied that there was a flaw in the iPad's internal Magnetometer, that it had nothing to do with their software, and there was nothing they could do about it - I should take it up with Apple. The app worked perfectly until their most recent update. I looked at their reviews/comments and numerous people were making the exact same complaint, and everyone said it stopped working as the result of the April 30 Starwalk update. I have one friend with a 3G iPad and the app still works fine for him. I have another friend with a wiFi version like me, and the app ALSO stopped working for him on April 30. So I understand not all iPads are affected.
So am I supposed to take this up with Apple now and tell them there is a flaw in their magnetometer that caused StarWalk to break as of their last update, and see if they can fix all our devices?
I don't believe Vito's assertion that their software is not at fault (considering so many people are complaining in their negative reviews that the last update triggered this breakage).
I'm frustrated and wonder if anyone else is experiencing this. Starwalk used to be my favorite app, and its even more frustrating to listen to the developer tell me its a device flaw that's been there all along, when me and many other people all had simultaneous magnetometer problems develop on April 30 - the moment we installed their last update.

Just that I have the latest from April 30 and there are no updates that are available to me. I guess you have the wifi only version as I do? I can't quite figure out why this would be affecting some people and not others. If you go to the StarWalk page on iTunes you'll see the list of people complaining about the same thing. In iTunes it also says my iPad software is up to date (I assume that means the OS/firmware).
So do you guys think this is something I take up with StarWalk or Apple? I feel a little ripped off that Vito has sold me a $6 app (granted that is not much) that has stopped working, and they are telling me its a flaw in the device.
I'll paste the response I received from Vito below. Bear in mind that although they say this has nothing to do with their software, all of the people who are complaining had a functioning app before April 30, and it stopped working as soon as we made that update.
Thank you for taking time to send us your feedback, it is highly appreciated.
In specific circumstances iPhone/iPad digital compass (magnetometer) may operate with difficulties, essentially causing errors in all applications that rely on its data.
Unfortunately, we cannot fix this particular problem, because it is caused by the digital compass malfunction and has nothing to do with our software. However, we are happy to offer you directions which may help you avoid experiencing this inconvenience in the future.
For better functioning of the digital compass consider doing the following:
1) Tilt your device from landscape to portrait orientation several times. This will help the digital compass recalibrate itself and calculate current position.
2) Make sure the compass is not obstructed by thick walls of buildings or large amounts of metal nearby. Try going outside.
3) Consider trying again later. Sometimes it is unclear what may be influencing the magnetometer.
If you need more information, please read the magnetometer specifications below.
We hope that these simple instructions were of help. Please don't hesitate to contact us if you have any further questions.
Sincerely,
Vito Technology Support Team
For more information:
Wikidia article http://en.wikipedia.org/wiki/Digital_compass :
"A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field in the vicinity of the instrument. Magnetism varies from place to place and differences in Earth's magnetic field (the magnetosphere) can be caused by the differing nature of rocks and the interaction between charged particles from the Sun and the magnetosphere of aplanet. Magnetometers are a frequent component instrument on spacecraft that explore planets."

Develop presets stopped working

Similar Messages

Maybe you are looking for