Developer Server Configuration Wizard

Why is it there is no developer server configuration wizard on
my application while I already install all the products in
Developer server CD by custom installation.
Kindly give me an assistance on this...
null

billy (guest) wrote:
: Why is it there is no developer server configuration wizard on
: my application while I already install all the products in
: Developer server CD by custom installation.
: Kindly give me an assistance on this...
There is an answer in this newsgroup, but i don't know the exact
title (Perhaps "Where can i launch the Server Wizard?" or so).
It was anything with unzipping the file in WZC\Bin and running
the batch files). Unfortunately, I failed trying to follow that
answer, and the Oracle support told me that they did not
implement the Wizard, which is a little curious.
Steve
null

Similar Messages

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

Hi,
I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
Steps done:
1) DB instance prepared
2) Created Siebel installation image
3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
Here are the errors I got in the log files sw_cfg_util*.log
<EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
Does anybody know what is the reason?
Searching in Metalink and Google were fruitless..
Thank you in advance.

Just in case anybody bumps in this thread:
The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
Applies to:
+Siebel CRM - Version: 8.1.1 SIA [21111] and later [Release: V8 and later ]+
Linux x86
Symptoms
Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
The error on sw_cfg_util_xx.log is as follows,
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
Reproduce steps:
- confirm that siebel server was created before, and is stopping.
- create sh env and enter the following command to remove the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "3 - Remove Existing Configuration".
- complete the configuration wizard.
- enter the following command to create the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "1 - Create New Configuration".
- continue inputs to finish and execute the configration.
+==> you'll find "Execution Failed".+
Cause
AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
Solution
You can do either of follows,
+(1) Uninstall and Install the Siebel Server again.+
+(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
+[Step]+
Name = AddSrvrRegistryEntry
Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
Edited by: mmango on Jan 31, 2012 12:21 AM

Server configuration Wizard?????

Hi I am getting the following error
OASCatridgeConfig.Class not found after running
runwzc
Please help!!!!
Regards
Rajs
null

Rajs (guest) wrote:
: Hi I am getting the following error
: OASCatridgeConfig.Class not found after running
: runwzc
: Please help!!!!
: Regards
: Rajs
1) install WindowsNT 4.0 , SP3
2) install IE5.0
3) install Oracle Developer 6.0 (select all options)
4) install Oracle Application Server 4.0.7
5) install Oracle8 Enterprise Edition 8.0.5.0.0
6) install Oracle JInitiator 1.1.7
7) unzip 'SUN' directory from C:\ORANT\JDK\LIB\Classes.zip
and copy it to C:\ORANT\FORMS60\JAVA
8) unzip C:\ORANT\WZC\BIN\Wzcwin32.exe to C:\ORANT\WZC
9) modify the WZCENV.BAT like this
REM jdk class path
set JDKCLASS=c:\orant\jdk\lib\classes.zip
REM jdk bin path
set JDKPATH=c:\orant\jdk\bin
REM ewt class path
set EWTCLASS=c:\orant\forms60\java
REM bali shared class path
set BALICLASS=c:\orant\forms60\java
REM wzc top path
set WZCHOME=c:\orant\wzc
REM netscape path
set NETSCAPEHOME=C:\Program
Files\Netscape\Communicator\Program
10) in MSDOS mode of WindowsNT , run WZCENV.BAT
11) in the same MSDOS mode , run RUNWZC.BAT to launch the
Oracle Developer Server Wizard
12) modify C:\ORANT\WEBHTML\static.html to run your application
BestRegards.
null

Developer Server and Oracle 7.3

Need to know if an Oracle 7.3, Developer 2.1 and Developer
Server configuration is reasonable for putting forms/reports on
the web, or if we should go to Oracle 8i. Are there any unusual
problems that we should be watching out for? Thanks in advance
for your assistance.
null

We have developed several form apps using the products in
question. We have experianced minor GUI problems but many of
these had patches. You can check by going to: ftp://oracle-
ftp.oracle.com/dev_tools/patchsets/dev2k/Win95NT/2.1/
I never experianced the scroll-bar problem the first response
talks about, not saying it isn't possible. Possibly a different
database platform.
All in all we have had good luck with the applications, little
bit of a setup learning curve, but once we were up and running
we produced some very effective web applications.
Susan (guest) wrote:
: Need to know if an Oracle 7.3, Developer 2.1 and Developer
: Server configuration is reasonable for putting forms/reports
on
: the web, or if we should go to Oracle 8i. Are there any
unusual
: problems that we should be watching out for? Thanks in
advance
: for your assistance.
null

Connect BizTalk Server Configuration with Sql Azure - version 2013 R2

Hi,
My data resides on Sql Azure. I need to create BizTalkRuleEngineDb on Sql Azure using Microsoft BizTalk Server Configuration wizard. Subsequently manage rules from Business Rule Composer.
I am unable to connect to Sql Azure from BizTalk Server Configuration application. Without this i could not create BizTalkRuleEngineDb on Sql Azure. I gave the following details:
Database server name: <servername>.database.windows.net,1433
User name: <username>
Password: <pwd>
When i click configure button, a message pops "The database server you specified cannot be reached...."
All i need from BizTalk is to create Business Rules Engine DB on Sql Azure. Then I would like to manage rules using Business
Rule Composer connecting to Sql Azure BizTalkRuleEngineDb.<o:p></o:p>
My business logic will programmatically access BizTalkRuleEngineDb db and execute rules using Microsoft.RuleEngine.dll<o:p></o:p>
Is this a feasible solution? I would like to see your inputs.
Any help is appreciated.
Thanks,
Tushar

First I would suggest you to perform sanity check to confirm if SQL server connectivity is perfect.
1) Verify the MSDTC Settings on both the servers:- It should resemble as below.
2) UDL Test:- Create a new "Text Document"(new notepad file) rename it to ABC.udl, double click and give the SQL server details and Test connection. If this fails it means BizTalk is not at all able to connect with SQL and in this
case BizTalk Application is just a victim of Network connectivity issue.
You can also refer the below article-
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Configure NWDI for local development Server only.

Hello Gurus,
I have a Netweaver 7.0 AS JAVA + ABAP installed in my local machine.
I wanted to create a Development Track for NWDI based development, but when i go to Change Management Service for to create a track I see that CMS domain is not setup!
Can anyone help me in configuring my AS JAVA's NWDI to use only one DEV server(for practice purposes)
regards,
Ganesh

Hi,
you have 2 options.
Either you run the DI-All-in one configuration wizard from the NWA which helps you amongs others to configure the NWDI domain,
http://help.sap.com/saphelp_nw73/helpdata/en/49/11f10fcf292810e10000000a42189c/frameset.htm
Or you do it manually.
http://help.sap.com/saphelp_nwpi711/helpdata/en/45/c571de75105709e10000000a114a6b/frameset.htm
see --> Configuring a Domain
Best Regards,
Ervin

Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?

Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR                    Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
   at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
   at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
   at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
   at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph

Weblogic Server 10.3.6 (64bit)- Configuration Wizard - JVM Error

Hi Friends,
I am new to forum threads. Please don't mind if I have posted incorrectly.
When I try to run configuration wizard of Weblogic server 10.3.6, I am getting the following error in JVM Launcher pop-up window.
Error : Could not Create the Java Virtual Machine
Error : A fatal Exception has occurred. Program will exit.
Note:
1) I have followed Start => Apps => Oracle WebLogic => Configuration Wizard to load the configuration wizard.
2) Facing the same problem while loading Fusion Middle Configuration Wizard ( Start => Apps => Oracl SOA 11g -Home1 => Configure Application Server )
Kindly suggest me with the best option to resolve the same.
Thanks in advance.
Rajesh

Hi Borys,
Thanks for your kind reply,
I have installed java-8 on my Window 8 machine, before installation of Weblogic itself and the location of JDK is "C:\Java\jdk1.8.0_25"
And the 'C:\Middleware\SOASuite11gR1PS6\wlserver_10.3\common\bin\commEnv' (windows command script file) contains the correct JAVA_HOME location by default, i.e JAVA_HOME=C:\Java\jdk1.8.0_25
While installing the weblogic serv (64-bit) , I have Opened the command prompt, navigated to the directory containing the Weblogic jar and entered the below command,
C:\Java\jdk1.7.0_35\bin\java -Xmx1024m -jar wls1036_generic.jar And successfully got installed the same.
Now, Do I still need to set the JAVA_HOME parameter on my windows ?
( FYI: when I got my windows8.1 OS with the machine, it is having default jre7 location as "C:\Program Files\Java\jre7\bin")
Thanks,
Rajesh

Weblogic Server 10.3.5 - Configuration Wizard Error

Hi
I am a newbie to forum threads. Please dont mind if I posted incorrectly.
When I try to run configuration wizard of weblogic server 10.3.5, I am getting the following error.
Java Virtual Machine Launcher
Could not find the main class:
com.oracle.cie.wizard.WizardController. Program will exit.
I have't moved any files from installatio directory.
Please anyone help me out to resolve the issue.
Thanks in advance.

How are you trying to run the installer?
Is it a .exe file OR a .bin file OR a .jar file?
I am assuming that it is a .jar file.
The .jar installers would need JAVA to be pre-installed and then use the pre-installed Java to run the installer
Something like:
<JAVA_HOME>\bin\java -jar wls1035_generic.jar
where JAVA_HOME is the location of the Java Installation
Please review the following documentation for further information:
http://docs.oracle.com/cd/E21764_01/doc.1111/e14142/guimode.htm#BABHJJEG
Arun

P6 EPPM configuration wizard won't connect to database server

I have installed P6 8.3 and Weblogic on one server (application server). On another server SQL is installed. When i run the P6 EPPM Configuration Wizard i get as far as the step 'Database Type & Connection' where i can fill in the details of the server and database to connect to. But then when i press 'next' nothing happens. I don't get any error, but the wizard is not going to the next step. I've tried it with all the options 'Create a new database', 'Upgrade an existing database' or simply 'Connect to an existing database'.
I've read in the documentation that to run the P6 Eppm wizard you need to be on an oracle or sql server, but how can i do that when the necessary files are on another server? As far as i was told it's possible to use two separate servers?
I hope someone can help.

Hi,
JRE 1.8.0_40 is not supported. Please check the tested configurations document for your version, client and browser sheet, uninstall JRE 8 U 40, install a supported version, update the JAVA_HOME, run P6 and try again.
Let me know the results.
Regards,
Pablo
========
Was our answer helpful?
If so, highlight the information for other Community members by rating it or marking the answer as correct.
Just hit the “Correct Answer” link on the answer, or rate it by clicking "Helpful Answer" or "Like".

Vb 2010 data source configuration wizard and sql server 2012

I am having a problem using the Data Source Configuration Wizard in vb 2010 express to connect to a remote SQL server database. The weird thing is that I can connect to it just fine if I manually dimension the sqlcommand, sqlconnection and set up the sql
connectionstring. So I know the connectivity is possible, but I would like to use the functionality of the Data Source Configuration Wizard.
Here's what happens when I attempt to add a connection via the Database Explorer:
I only get two SQL Server options. Neither will let me connect to a remote database.
I know that Microsoft SQL Server Compact 3.5 isn't what I want, but I have tried it anyway. It will only let me connect to a database on my computer. An 'ActiveSync' option is greyed out.
Microsoft SQL Server Database File would appear to be what I want, but when I select this option, it informs me (as you can see) that this will only work for a local database:
The connection string that I build manually (and which works) looks like this:
Dim
myConn
As
NewSqlConnection(sConnect)
sConnect =
""Data Source=xxxxxx.xxxxxx.com;Server=""Xxxx XXX Database"";Initial Catalog=StockAnalysisProd;User
ID=cadietz;Password = "& sPW &
I have attempted all variation of this string in the database file name input box to no avail. I think it really should go in as a Data Source but those are hard wired and cannot be changed. I'm sure I'm doing something stupid, but I need someone
to point out what it is. Thanks in advance for your help...
Alex3764

Alberto... thanks for your reply.
Unfortunately this does not appear to work. I downloaded Visual Studio Express for the Web (2012) and attempted the 'work around' proposed by Sergey and I could not make it work on the remote server. I have given up on the Data Connection Wizard and
am simply connecting to my remote SQL server using the manual classes (SqlConnection, SqlCommand, SqlDataAdapter, etc.). The moderator has marked this as an answer but I'm going to unmark it.
I am now even more frustrated because I now find that I cannot connect to my LOCAL SQL database using the Data Connection Wizard and the circumstances are even weirder. Here's what happens:
I open the Add Connection window, select 'Microsoft SQL Server Database File (SqlClient)' as the data source.
I then browse to my local database file in the Database file name input box. When I click the 'Test Connection' button I get a message box that informs me: 'Test connection
succeeded'. Voila!
But, alas, when I close the message box and click OK on the Add Connection window I get this message: 'The ability to open this connection is not supported in this edition of Visual Studio'.
I mean this borders on the absurd. Why is the Data Connection Wizard even offered with VB 2010 Express if you can't use it for anything. Once again I can get around the problem manually but I'm getting very frustrated with MS. Any suggestions??
Alex3764

Project Server 2013 Configuration Wizard Error

Hi Everyone,
I have installed SharePoint 2013 over Single Server with built in DB. Server
uses Windows Server 2008 & SQL Server 2008. SharePoint installed correctly and it is running well.
Now,
I need to install Project Server 2013, so I installed its required updated, its prerequisites, then installed it. After installation, Configuration wizard started, but it failed with following error info:-
What
is the reason of that error and how to solve this problem?
Thanks
Wa'el Mohsen

That sounds easy enough. Just two questions though:
1) what is 25774? KB? an update?
2) how do I delete it from IIS?
Thank you,

Configuring my OEM for "Oracle Developer Server Forms Manager"

Hello,
Please help me in configuring my Oracle Developer Server Forms Manager on Oracle Enterprise Manager.
thanks to send me the guidelines
regards
Yogeeraj

Hi,
I have had a look at my installation, and what I did was create two directories called disk1 and disk2, (for the two extracted zip files) and then ran setup in the disk 1 directory. So I don't know if it was aware of the disk 2 directory.
I am re-installing it now. So I will get back to you.
Thank you very much for getting back so quickly.
Regards
Wayne.

Configuration wizards getting failed in SharePoint server.

I installed SharePoint server 2010 on windows 7 sp1, it's working fine. Suddenly i got an issue, where am not able to see look & feel of central admin page, not able to go web application.
I tried running configuration wizards from both products & from 14 hive.
Please find the error screenshot:
Badri

Please find the recent log file.
Timestamp
Process
TID Area
Category
EventID Level
Message Correlation
05/13/2014 12:41:33.83 wsstracing.exe (0x3B2C)
0x401C SharePoint Foundation
Unified Logging Service
b9wt High
Log retention limit reached. Log file 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\OHDO790GY29VQ1-20140429-1141.log' has been deleted.
05/13/2014 12:41:33.83 wsstracing.exe (0x3B2C)
0x401C
SharePoint Foundation Tracing Controller Service
8096 Information
Usage log retention limit reached. Some old usage log files have been deleted.
05/13/2014 12:41:34.43 OWSTIMER.EXE (0x22D0)
0x2D14
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job SchedulingApproval)
c556b7e5-f8ef-41b7-bd18-d9361b2e7a93
05/13/2014 12:41:34.45 OWSTIMER.EXE (0x22D0)
0x2D14
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job SchedulingApproval). Execution Time=25.8087340378262
c556b7e5-f8ef-41b7-bd18-d9361b2e7a93
05/13/2014 12:41:35.31 Microsoft.Office.Server.Convers (0x3BAC)
0x34B0 Document Conversions
Launcher Service
7jg8 Medium
Calling LoadBalancer.RegisterLauncher
05/13/2014 12:41:36.31 Microsoft.Office.Server.Convers (0x395C)
0x2678 Document Conversions
Load Balancer Service
7jhf Medium
RegisterLauncher called with uri http://OHDO790GY29VQ1:8082/HtmlTrLauncher
05/13/2014 12:41:36.31 Microsoft.Office.Server.Convers (0x3BAC)
0x34B0 Document Conversions
Launcher Service
7jg9 Medium
LoadBalancer.RegisterLauncher succesful
05/13/2014 12:41:47.43 OWSTIMER.EXE (0x22D0)
0x1EFC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job Search Health Monitoring - Trace Events)
11ff6945-f196-468f-80ae-bd377ff496c0
05/13/2014 12:41:47.43 OWSTIMER.EXE (0x22D0)
0x1EFC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job Search Health Monitoring - Trace Events). Execution Time=2.75081863493229
11ff6945-f196-468f-80ae-bd377ff496c0
05/13/2014 12:41:48.43 OWSTIMER.EXE (0x22D0)
0x27BC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job job-application-server-admin-service)
314f1684-db64-4520-8217-b95ba78b83ef
05/13/2014 12:41:48.43 OWSTIMER.EXE (0x22D0)
0x27BC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job job-application-server-admin-service). Execution Time=1.01574725189807
314f1684-db64-4520-8217-b95ba78b83ef
05/13/2014 12:41:49.43 OWSTIMER.EXE (0x22D0)
0x04B4
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job SchedulingApproval)
c7fc8f94-0017-4ede-bbf6-7eaf36628cd8
05/13/2014 12:41:49.43 OWSTIMER.EXE (0x22D0)
0x04B4
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job SchedulingApproval). Execution Time=1.57931340919189
c7fc8f94-0017-4ede-bbf6-7eaf36628cd8
05/13/2014 12:41:50.26 w3wp.exe (0x16E4)
0x1834
SharePoint Portal Server
Runtime
8gp7 Medium
Topology cache updated. (AppDomain: /LM/W3SVC/1856782513/ROOT-1-130444334287775456)
05/13/2014 12:41:51.43 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job job-application-server)
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:51.43 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Server Search
Administration
dkd5 High
synchronizing search service instance
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:51.43 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Server Search
Administration
eff0 High
synchronizing search data access service instance
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:51.55 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Server Search
Administration
dl2a Medium
Search application 'SSA': Verify correctness of incremental crawl schedule on content source 'Local SharePoint sites'.
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:51.55 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Server Search
Administration
dl2i Medium
Search application 'SSA': Provision start addresses in default content source.
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:51.56 OWSTIMER.EXE (0x22D0)
0x2B0C
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job job-application-server). Execution Time=125.500176284218
bb42fc36-a36e-4da5-81f4-b4075b7df2f6
05/13/2014 12:41:56.44 OWSTIMER.EXE (0x22D0)
0x2A60
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job SchedulingUnpublish)
cdb4aea2-e567-419f-b055-bf6e13b4613c
05/13/2014 12:41:56.44 OWSTIMER.EXE (0x22D0)
0x2A60
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job SchedulingUnpublish). Execution Time=1.70699872495798
cdb4aea2-e567-419f-b055-bf6e13b4613c
05/13/2014 12:41:57.43 OWSTIMER.EXE (0x22D0)
0x0CDC
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job SchedulingUnpublish)
f34368d8-edfc-45e3-9a91-03be33db2496
05/13/2014 12:41:57.43 OWSTIMER.EXE (0x22D0)
0x0CDC
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job SchedulingUnpublish). Execution Time=1.68315205842011
f34368d8-edfc-45e3-9a91-03be33db2496
05/13/2014 12:41:57.54 mssearch.exe (0x3FDC)
0x348C
SharePoint Foundation Search GatherPI
e5aq High
locking gatherer for status change NSC_CRAWL_DONE (988d8188-a8a6-4895-b06b-9dbae288331a, Search, crawl 95952) [gatherobj.cxx:1740] d:\office\source\search\native\gather\server\gatherobj.cxx
05/13/2014 12:41:57.54 mssearch.exe (0x3FDC)
0x348C
SharePoint Foundation Search GatherPI
e5e0 High
advising status change NSC_CRAWL_DONE (988d8188-a8a6-4895-b06b-9dbae288331a Search crawl 95952) [gatherobj.cxx:4514] d:\office\source\search\native\gather\server\gatherobj.cxx
05/13/2014 12:41:57.55 mssearch.exe (0x3FDC)
0x3078
SharePoint Foundation Search GatherPI
dww2 Medium
processing status change (1) NSC_CRAWL_DONE, (988d8188-a8a6-4895-b06b-9dbae288331a, Search) thread id 0x3078 [statthrd.cxx:97] d:\office\source\search\native\gather\server\statthrd.cxx
05/13/2014 12:41:57.55 mssearch.exe (0x3FDC)
0x3078
SharePoint Foundation Search GatherPI
dra4 High
CGthrPrj::AdviseStatusChange : advising status change NSC_CRAWL_DONE (Search 988d8188-a8a6-4895-b06b-9dbae288331a ) [cgatherprj.cxx:1698] d:\office\source\search\native\gather\gthrsvc\cgatherprj.cxx
05/13/2014 12:41:57.55 mssearch.exe (0x3FDC)
0x3078
SharePoint Foundation Search GatherPI
ds7h High
CPluginCollection::AdviseStatusChange : advising status change NSC_CRAWL_DONE (Search 988d8188-a8a6-4895-b06b-9dbae288331a ) [plugin.cxx:929] d:\office\source\search\native\gather\gthrsvc\plugin.cxx
05/13/2014 12:41:57.55 mssearch.exe (0x3FDC)
0x3078
SharePoint Foundation Search GatherPI
ds7h High
CPluginCollection::AdviseStatusChange : advising status change NSC_CRAWL_DONE (Search 988d8188-a8a6-4895-b06b-9dbae288331a ) [plugin.cxx:929] d:\office\source\search\native\gather\gthrsvc\plugin.cxx
05/13/2014 12:41:57.55 mssearch.exe (0x3FDC)
0x3078
SharePoint Foundation Search IDXPIPlugin
dyz9 Medium
988d8188-a8a6-4895-b06b-9dbae288331a: Fresh doc count: 11, master index doc count: 44275 [tripmain.cxx:1718] d:\office\source\search\native\ytrip\search\tripoliplugin\tripmain.cxx
05/13/2014 12:42:00.44 OWSTIMER.EXE (0x22D0)
0x0E54
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job UPA_LanguageSynchronizationJob)
77de5e6c-319b-4b6d-b98b-70ad0b643d37
05/13/2014 12:42:00.44 OWSTIMER.EXE (0x22D0)
0x0E54
SharePoint Server
General
0000 Medium
Constructed a new async cache named Profile Property Cache
77de5e6c-319b-4b6d-b98b-70ad0b643d37
05/13/2014 12:42:00.44 OWSTIMER.EXE (0x22D0)
0x08A0
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job UPA_ProfileSynchronizationJob)
1afa1e2f-c343-45cd-a7de-7ce24470915d
05/13/2014 12:42:00.44 OWSTIMER.EXE (0x22D0)
0x0E54
SharePoint Foundation Topology
e5mc Medium
WcfSendRequest: RemoteAddress: 'http://ohdo790gy29vq1:32843/723b04949d9149c3b7808a2390c3d249/ProfilePropertyService.svc' Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
MessageId: 'urn:uuid:6a76bfaf-90ba-4215-b2fe-49e4705217f9'
77de5e6c-319b-4b6d-b98b-70ad0b643d37
Badri

Developer Server Configuration Wizard

Similar Messages

Maybe you are looking for