Problem in printing pageno. in spool

hi all.
am pritin a report in spool.. there are 5 spool requests for the print.. am generating the new spool request using get_print_parameters fm ..new page on .. each spool request should start with page no.1 ..but the problem am facing is the page no's are continuing in the next spool request ..
for eg:-
1. first spool -> 1-5 page no's
2. 2nd spool -> 6-8 page no's
3. 3rd spool-> 9-14 page no's ..so on.... the page no' are contuining in the new spool request's
but the page no. should always start with 1 in every new spool request.
1. 1st spool - 1-5 page no's
2. 2nd spool - 1-3
3. 3rd spool - 1-6.... -> this is expected..
pls suggest the possible alternatives
thanks
suresh

Hi Suresh,
Please set PRNEW as 'X' once after calling FM
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING out_parameters = params
valid = valid.
params-PRNEW = 'X'

Similar Messages

Print an existing spool in ABAP program.

Hi Experts,
I have a problem to print an existing spool.
I need print many an existing spools in ABAP program
- I used the SHDB and call transaction with BDC data but work only for 1st.
- I tried use the RSPO_RPRINT_SPOOLREQ function but don't work.

I resolved my own problem.
I use the function RSPO_OUTPUT_SPOOL_REQUEST...
The only parameters to this functions was spool_request_id - ID spool.
Thanks for help!

Problem with Printing from Spool

Dear Experts,
I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
Kindly solve my issue, this happen frequently.
Thanks & Regards,
Srinivas

Dear Siva,
Everything is ok in SPAD. This happen for few process order for COPI transaction.
Regards,
Srini

W-2 Printing from PDF Spool

We are having problems with printing w-2's once they are generated through pu19. The spool generates a pdf file but we are unable to print the spool. I need to know if anyone is having the same issue and is there a solution or workaround. We have opened a SAP Note but the solutions provided thus far has not help us overcome the issue.

Hi,
It looks like printer settings are not working for spool.
Please check with basis team for same.
Thanks,
Ameet

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

Problem while printing through citrix

Dear Gurus ,
We are facing the problem during printing through citrix .
When we print locally without using citrix were able to get the proper print as it displayed in the spool .
But When we try to take the printout of document having say 12 colum , only 10 colums r coming asthe print out .
Please suggest as the views on this issue are valuable
Thanks in advance .
Chirag Kohli .

Hi
I am facing same problem
Please let me know if you get any solution
Thanks
Rakesh Patel
[email protected]

Problem with printing graphics in SAP Script

Hi,
I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
Plese tell me the solution.
Thanks,
Srinivas

You need to check your printer settings.Might be drivers are missing.

Performance problem when printing - table TSPEVJOB big size

Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio Manera

Dear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM

Getting font problem for printing form in Production server.

Hi experts,
We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
Can any one suggest me on this issue.
Regards,
Sagun Desai.

Hi sagun,
Please check the spool request generated on production server using tcode SP01.
Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
The printer connected to the test server might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
Hope this helps.
Regards,
Subodh

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

Problems in printing.

Hi all,
I am trying to print check on paper size ' Legal'.
iam able to see the print on the spool but not on the printout. printing on 'LOCL'. it printed previously.
The section which is not visible is in the lowest side of the paper.
how can i correct this, problem.
Thanks in advance.

If you are using LOCL for the destination, it is probably a Windows issue. LOCL will use the SAPlpd program. It should detect your default Windows printer. Check the printer settings in Windows. It probably defaults to LETTER.
You can verify by NOT sending it to a LOCL printer. Send it to a dedicated printer in SAP and see if the print is visible on the output.

Problem in Print Out of Excise register RG1

Dear all,
We have a business scenario as follows:
1.Production Order Confirmation-101, 261 for receipt
2. Scrap Receipt-262.
For Scrap Sales:
The entry in RG1 should be Scrap receipt (262) and then despatch of scrap i.e issue(601).
During updation we do the following:
We receive scrap in RG1 register through RMA classification. Then we issue the scrap in RG1 register through IDH Classification. The register also get updated and extracted successfully.
Problem: While printing of RG1 register there is no entry for Receipt (262) and issue(601) of scrap.
Regards,

Can anyone pls suggest how to capture Scrap sale in RG1.

Problem with printing in character mode

Hi
I got a genuine problem in printing continous payslips using character mode with a TALLY6050 printer.
I guess there is a problem with the page setup when i try to print via windows. using different sizes of paper (Letter, A4, A3), the printed data is shifting from one page to another but the shift is following a same trend.
i tried to put one payslip per page using page breaks, but in vain. Three payslips are being printed on one page when viewed in the print perview.
Can anyone suggest any help or tips so that i can solve this problem?
Thanks for your help
Bhavish

Thanks for your response. I went ahead and filed a Correction Action Request for your orignal issue, since I was able to reproduce the same behavior when I ran your VI. The solution of printing the front panel of a subVI displaying the same graph is a workaround for this problem. Please look at the following KnowledgeBase for more details on how to do this. Hope this helps!
How Do I Print a Single Control from the Front Panel (for example, a Graph)?

How to Print List to spool but skip the print parameter window?

Dear all,
I am coding a program for print list into spool.
But every times I run the program there must pop up a print parameter window, after I click the 'Continue' button,then the list print to spool.
Is there some way that I can just run the program and print to spool directly?
                           Thank you for your kindness help~~~
Message was edited by: jin yan

Hi,
If it is a report program then, use this code.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION           = 'LP01'
            COPIES                = COUNT
            LIST_NAME             = 'TEST'
            LIST_TEXT             = 'SUBMIT rep... TO SAP-SPOOL'
            IMMEDIATELY           = 'X'
            RELEASE               = 'X'
            NEW_LIST_ID           = 'X'
            EXPIRATION            = DAYS
            LINE_SIZE             = 79
            LINE_COUNT            = 23
            LAYOUT                = 'X_PAPER'
            SAP_COVER_PAGE        = 'X'
            COVER_PAGE            = 'X'
            RECEIVER              = 'SAP*'
            DEPARTMENT            = 'System'
            NO_DIALOG             = 'X'
IMPORTING OUT_PARAMETERS        = PARAMS
            VALID                 = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
    SPOOL PARAMETERS PARAMS
    WITHOUT SPOOL DYNPRO.
ENDIF.
Hope This Info Helps YOU.
<i>Reward Points If It Helps YOU.</i>
Regards,
Raghav

Problem in printing pageno. in spool

Similar Messages

Maybe you are looking for