DFS in Windows Server 2012 R2

Hi,
I am trying to configure DFS Replication through powershell. And I am able to upto a certain limit. The group is getting created. But error is while adding members. Doing manually also results in the error in the same stage.
In powershell the error is "add-dfsrmember could not add the computer to the replication group" and while doing manually the error is "The information cannot be retrieved for the computer. the network path was not found".
By the way, I don't have a Windows AD machine, which means all the computers are still in a domain of AWS directory service (yes, it's an AD in a way). I have installed RSAT-AD and LDS tool in the source server.
Can anyone help me on this issue, how can I solve this?
Vysakh

Hi,
I cannot confirm if AWS will affect DFS function. From the error message, it just cannot get connect to the server you are trying to add. Please first check if you can access that server with \\server\folder. Also disable firewall on both server to see the
result.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Intermittent loss of UNC path access on Windows Server 2012

Hi All,
I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the only way we have
found to resolve this is to reboot. When the issue happens, we can't even log into the server as it sits at 'applying user settings' - presumably as it is failing to access the netlogon share on our DCs. If we have an active RDP session when the issue occurs,
we can connect. In this instance we see that if you enter a UNC path in Windows explorer and hit enter, nothing happens - no error messages or anything. The only way I can get any response is when trying to access the IPC$ share on another server, which gives
the following response:
\\server\ipc$ is not accessible. You might not have permission to use this resource, Contact the administrator of this server to find out if you have access permissions.
The parameter is incorrect.
Everything looks right from a physical network perspective, as we can ping from the affected servers and DNS queries are working fine. I can even run net view from powershell and see the local servers and shares on these, however any attempt to access shares
just hangs the powershell session.
If I look in the SMBClient event logs, I can see entries like the following:
Event ID 30805
The client lost its session to the server.
Error: The transport connection is now disconnected.
This is made worse by the fact that when this issue happens, we can't even cleanly reboot the server (it just hangs) and have to perform a cold boot.
The firewall has been turned off and we have taken off our antivirus software to eliminate it as a possible cause. We have even rebuilt one of these servers on a clean install of 2012 R2, but the issue re-appeared. We have also tried using different NIC
drivers (Broadcom NICs installed) to no avail. We have also tried disabling IPv6.
We have logged a ticket with Microsoft support, who have come back telling us that this could be related to a known bug with DFS in 2012 for which a fix is being tested prior to release in a few weeks. However, I can't sit around on my hands until then on
the off chance that this fix will resolve our problem. These servers are hosting our production Lync 2013 front end service and when this issue occurs it breaks the address book search and response group services, so this issue is of critical importance for
us to get resolved asap.
Any help on this would be greatly appreciated.

Hi,
That's right, if you hit enter absolutely nothing happens, no error messages. It makes no difference if I try name or IP address - even trying \\localhost doesn't work. A few minutes later after trying, an entry appears in the SMBClient event logs as mentioned
in my original post. To me it looks like something deep within the networking operations of the OS is randomly breaking. Also, if I try to browse the network from Windows explorer, it just hangs. When I try to restart the workstation service, it just gets
permanently stuck in a stopping state and the server has to be cold booted. Once it boots up, everything is working fine again....until the next time. There is absolutely nothing appearing in the application or system event logs indicating the root cause.
I've checked and DNS resolution is working OK and I can telnet to other hosts on all the required ports.
I had originally thought it might be related to the Broadcom NICs as we've had issues with them in the past, but we switched over to use the 2012 inbox driver for them and the same issue happens. I should also mention that one server is a blade and the other
a rackmount box. Dell support have run full diagnostics on both and have come up clean, so it doesn't appear to be a hardware issue. The even more baffling thing is that we have a third server with identical spec and config that does not have the problem.
The only difference with this third server is that it is not part of a Lync pool pairing using DFS and sits in a remote location on a different LAN.
I had thought of trying to drop back to use SMB1 by disabling SMB2 and 3, but I'm not sure if this would adversely affect any other services.
This one really has me stumped.

Not working properly Computer Browser service in Windows Server 2012

Good afternoon.
Migrated from 2003 to 2012 Active Directory, all is good, but the service Computer Browser in Windows Server 2012 is not working properly.
Online, there are several hundred computers, one network, no segments. PDC is the Master Browser, it is in my list of all the computers, but gives customers or Backup Browser computers only part, and in alphabetical order, giving the first 70 computers and
all.
Looked packet sniffer:
Microsoft Windows Lanman Remote API Protocol
Entry Count: 70
Available Entries: 251
So on Master Browser shows 251 computer, and the client 70.
If disabled on Windows Server 2012 Service Computer Browser, Master Browser is a computer running Windows Server 2003. He gives all computers.
What is the problem, how to get Windows Server 2012 to work correctly as a Master Browser?

More info. I have high lighted in bold where the issue is. This is a massive headache for me at the moment
Frame: Number = 377, Captured Frame Length = 182, MediaType = ETHERNET
- Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-13-72-52-6E-A1],SourceAddress:[00-1E-0B-2B-68-DD]
- DestinationAddress: Dell Inc. 526EA1 [00-13-72-52-6E-A1]
     Rsv: (000000..)
     UL: (......0.) Universally Administered Address
     IG: (.......0) Individual address (unicast)
- SourceAddress: 001E0B 2B68DD [00-1E-0B-2B-68-DD]
     Rsv: (000000..)
     UL: (......0.) Universally Administered Address
     IG: (.......0) Individual address (unicast)
    EthernetType: Internet IP (IPv4), 2048(0x800)
- Ipv4: Src = 10.44.46.101, Dest = 10.44.44.14, Next Protocol = TCP, Packet ID = 14025, Total IP Length = 168
- Versions: IPv4, Internet Protocol; Header Length = 20
     Version:      (0100....) IPv4, Internet Protocol
     HeaderLength: (....0101) 20 bytes (0x5)
- DifferentiatedServicesField: DSCP: 0, ECN: 0
     DSCP: (000000..) Differentiated services codepoint 0
     ECT: (......0.) ECN-Capable Transport not set
     CE:   (.......0) ECN-CE not set
    TotalLength: 168 (0xA8)
    Identification: 14025 (0x36C9)
- FragmentFlags: 16384 (0x4000)
     Reserved: (0...............)
     DF:       (.1..............) Do not fragment
     MF:       (..0.............) This is the last fragment
     Offset:   (...0000000000000) 0
    TimeToLive: 128 (0x80)
    NextProtocol: TCP, 6(0x6)
    Checksum: 0 (0x0)
    SourceAddress: 10.44.46.101
    DestinationAddress: 10.44.44.14
- Tcp: Flags=...AP..., SrcPort=65372, DstPort=NETBIOS Session Service(139), PayloadLen=128, Seq=1910965363 - 1910965491, Ack=580319796, Win=252 (scale factor 0x8) = 64512
    SrcPort: 65372
    DstPort: NETBIOS Session Service(139)
    SequenceNumber: 1910965363 (0x71E70473)
    AcknowledgementNumber: 580319796 (0x2296FA34)
- DataOffset: 80 (0x50)
     DataOffset: (0101....) 20 bytes
     Reserved:   (....000.)
     NS:         (.......0) Nonce Sum not significant
- Flags: ...AP...
     CWR:    (0.......) CWR not significant
     ECE:    (.0......) ECN-Echo not significant
     Urgent: (..0.....) Not Urgent Data
     Ack:    (...1....) Acknowledgement field significant
     Push:   (....1...) Push Function
     Reset: (.....0..) No Reset
     Syn:    (......0.) Not Synchronize sequence numbers
     Fin:    (.......0) Not End of data
    Window: 252 (scale factor 0x8) = 64512
    Checksum: 0x6F65, Disregarded
    UrgentPointer: 0 (0x0)
    TCPPayload: SourcePort = 65372, DestinationPort = 139
- Nbtss: SESSION MESSAGE, Length =124
    PacketType: SESSION MESSAGE, 0(0x00)
- Flags: Add 0 to Length
     Reserved: (0000000.)
     Extension: (.......0)Add 0 to Length
    Length: 124(0x7C)
- SMB: C; Transaction, Remote Administration Protocol, FileName = \PIPE\LANMAN
    Protocol: SMB
    Command: Transaction 37(0x25)
- NTStatus: 0x0, Facility = FACILITY_SYSTEM, Severity = STATUS_SEVERITY_SUCCESS, Code = (0) STATUS_SUCCESS
     Code:     (................0000000000000000) (0) STATUS_SUCCESS
     Facility: (...0000000000000................) FACILITY_SYSTEM
     Customer: (..0.............................) NOT Customer Defined
     Severity: (00..............................) STATUS_SEVERITY_SUCCESS
- SMBHeader: Command, TID: 0x2001, PID: 0x276C, UID: 0x3801, MID: 0x0140
   - Flags: 24 (0x18)
      LockAndRead:     (.......0) LOCK_AND_READ and WRITE_AND_UNLOCK NOT supported (Obsolete) (SMB_FLAGS_LOCK_AND_READ_OK)
      NoAck:           (......0.) An ACK response is needed (SMB_FLAGS_SEND_NO_ACK[only applicable when SMB transport is NetBIOS over IPX])
      Reserved_bit2:   (.....0..) Reserved (Must Be Zero)
      CaseInsensitive: (....1...) SMB paths are case-insensitive (SMB_FLAGS_CASE_INSENSITIVE)
      Canonicalized:   (...1....) Canonicalized File and pathnames (Obsolete) (SMB_FLAGS_CANONICALIZED_PATHS)
      Oplock:          (..0.....) Oplocks NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK)
      OplockNotify:    (.0......) Notifications NOT supported for OPEN, CREATE & CREATE_NEW (Obsolete) (SMB_FLAGS_OPLOCK_NOTIFY_ANY)
      FromServer:      (0.......) Command - SMB is being sent from the client (SMB_FLAGS_SERVER_TO_REDIR)
   - Flags2: 51207 (0xC807)
      KnowsLongFiles:            (...............1) Understands Long File Names (SMB_FLAGS2_KNOWS_LONG_NAMES)
      KnowsEas:                  (..............1.) Understands extended attributes (SMB_FLAGS2_KNOWS_EAS)
      SmbSecuritySignature:      (.............1..) Security signatures enabled (SMB_FLAGS2_SMB_SECURITY_SIGNATURE)
      Compressed:                (............0...) Compression Disabled for REQ_NT_WRITE_ANDX and RESP_READ_ANDX (SMB_FLAGS2_COMPRESSED)
      SecuritySignatureRequired: (...........0....) Security Signatures are NOT required (SMB_FLAGS2_SMB_SECURITY_SIGNATURE_REQUIRED)
      Reserved_bit5:             (..........0.....) Reserved (Must Be Zero)
      IsLongName:                (.........0......) DO NOT use Long File Names (SMB_FLAGS2_IS_LONG_NAME)
      Reserved_bits7_9:          (......000.......) Reserved (Must Be Zero)
      ReparsePath:               (.....0..........) NOT a Reparse path (SMB_FLAGS2_REPARSE_PATH)
      ExtendedSecurity:          (....1...........) Aware of extended security (SMB_FLAGS2_EXTENDED_SECURITY)
      Dfs:                       (...0............) NO DFS namespace (SMB_FLAGS2_DFS)
      Paging:                    (..0.............) Read operation will NOT be permitted unless user has permission (NO Paging IO) (SMB_FLAGS2_PAGING_IO)
      NTStatus:                  (.1..............) Using 32-bit NT status error codes (SMB_FLAGS2_NT_STATUS)
      Unicode:                   (1...............) Using UNICODE strings (SMB_FLAGS2_UNICODE)
     PIDHigh: 0 (0x0)
     SecuritySignature: 0x0
     Unused: 0 (0x0)
     TreeID: 8193 (0x2001)
     ProcessID: 10092 (0x276C)
     UserID: 14337 (0x3801)
     MultiplexID: 320 (0x140)
- CTransaction:
     WordCount: 14 (0xE)
     TotalParameterCount: 32 (0x20)
     TotalDataCount: 0 (0x0)
     MaxParameterCount: 8 (0x8)
     MaxDataCount: 4200 (0x1068)
     MaxSetupCount: 0 (0x0)
     Reserved: 0 (0x0)
   - Flags: Do NOT disconnect TID
      Disconnect: (...............0) Do NOT disconnect TID
      NoResponse: (..............0.) Server response to the client
      Reserved:   (00000000000000..) Reserved
     Timeout: 5000 milli sec(s)
     Reserved2: 0 (0x0)
     ParameterCount: 32 (0x20)
     ParameterOffset: 92 (0x5C)
     DataCount: 0 (0x0)
     DataOffset: 0 (0x0)
     SetupCount: 0 (0x0)
     Reserved3: 0 (0x0)
     ByteCount: 61 (0x3D)
   - RemoteAPIBuffer:
    - FileName: \PIPE\LANMAN
     - Align: 1 Bytes
        AlignBytes: Binary Large Object (1 Bytes)
       Name: \PIPE\LANMAN
      Pad1: Binary Large Object (2 Bytes)
- RAPRequest: NetServerEnum2 Request, InfoLevel = 1, SV_TYPE_ALL: All in NSNET
    RAPOpcode: NetServerEnum2
- ParameterDescriptor: WrLehDz; 4 send, 1 receive parameter
     Param: (W) WORD (send parameter, 16 bit integer)
     Param: (r) Receive buffer (format in data descriptor) (receive data, 0 bit integer)
     Param: (L) Receive buffer length (send/receive parameter, 16/16 bit integer)
     Param: (e) Entries read (receive data, 0 bit integer)
     Param: (h) WORD (receive parameter, 16 bit integer)
     Param: (D) DWORD (send parameter, 32 bit integer)
     Param: (z) ASCIIZ (send parameter, 8 bit integer)
     Param: ASCII NUL (string terminator)
- DataDescriptor: B16BBDz; data bytes send: 0, receive: 34
   - Datum: (B) BYTE[16] (receive data, 8 bit integer)
      Datum: (B) BYTE (receive data, 8 bit integer)
      Digit: 1
      Digit: 6
     Datum: (B) BYTE (receive data, 8 bit integer)
     Datum: (B) BYTE (receive data, 8 bit integer)
     Datum: (D) DWORD (receive data, 32 bit integer)
     Datum: (z) ASCIIZ* (receive data offset, 32 bit integer)
     Datum: ASCII NUL (string terminator)
- NetServerEnum2: SV_TYPE_ALL: All in NSNET
     InfoLevel: (1) SERVER_INFO_1
     ReceiveBufferSize: 4200 (0x1068)
   - ServerType: SV_TYPE_ALL: All
      Workstation:      (...............................1) All workstations
      Server:           (..............................1.) All computers with the server service running
      Sqlserver:        (.............................1..) All running Microsoft SQL Server
      DomainCtrl:       (............................1...) All primary domain controllers
      DomainBakctrl:    (...........................1....) All backup domain controllers
      TimeSource:       (..........................1.....) All Time servers
      AFP:              (.........................1......) All Apple File Protocol servers
      Novell:           (........................1.......) All Novell servers
      DomainMember:     (.......................1........) All LAN Manager 2.x domain members
      PrintqServer:     (......................1.........) All print servers
      DialinServer:     (.....................1..........) All dial-in servers
      ServerUnix:       (....................1...........) All Unix/Xenix servers
      NT:               (...................1............) All Windows NT workstations or servers
      WFW:              (..................1.............) All Windows for Workgroups servers
      ServerMFPN:       (.................1..............) All Microsoft File and Print for NetWare servers
      ServerNT:         (................1...............) All non-domain controller servers
      PotentialBrowser: (...............1................) All servers that can run the browser service
      BackupBrowser:    (..............1.................) All backup browsers
      MasterBrowser:    (.............1..................) All master browsers
      DomainMaster:     (............1...................) All domain master browsers
      Reserved1:        (..........11....................)
      Windows:          (.........1......................) All Windows 95 or later
      DFS:              (........1.......................) All DFS root servers
      ClusterNT:        (.......1........................) All NT Clusters
      Terminalserver:   (......1.........................) All Terminal Servers
      ClusterVSNT:      (.....1..........................) All NT Cluster Virtual Server Names
      DCE:              (....1...........................) AllIBM DSS (Directory & Security Services)
      Reserved2:        (...1............................)
      AlternateXport:   (..1.............................) Return list for alternate transport
      LocalListOnly:    (.1..............................) Return local list only
      DomainEnum:       (1...............................) Enumerate primary domain
     Domain: NSNET
Then the reply;
   Frame: Number = 378, Captured Frame Length = 1514, MediaType = ETHERNET
+ Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[00-1E-0B-2B-68-DD],SourceAddress:[00-13-72-52-6E-A1]
+ Ipv4: Src = 10.44.44.14, Dest = 10.44.46.101, Next Protocol = TCP, Packet ID = 27036, Total IP Length = 1500
+ Tcp: Flags=...A...., SrcPort=NETBIOS Session Service(139), DstPort=65372, PayloadLen=1460, Seq=580319796 - 580321256, Ack=1910965491, Win=253 (scale factor 0x8) = 64768
+ Nbtss: SESSION MESSAGE, Length =2013
+ SMB: R; Transaction, Remote Administration Protocol
- RAPResponse: NetServerEnum2 Response, Count = 31
    Win32ErrorCode: 0x00000000 - ERROR_SUCCESS - The operation completed successfully.
    Converter: 2251 (0x8CB)
- NetServerEnum2: Count = 31
     EntriesReturned: 31 (0x1F)
     EntriesAvailable: 31 (0x1F)
   + NetServerInfo1: APOLLO
   + NetServerInfo1: ARTEMIS
   + NetServerInfo1: ASKLEPIOS
   + NetServerInfo1: CASTOR
   + NetServerInfo1: DCC4503-131L
   + NetServerInfo1: DCC4503-155L
   + NetServerInfo1: DCC4503-157L
   + NetServerInfo1: DCC4503-161L
   + NetServerInfo1: DCC4503-171L
   + NetServerInfo1: DCC4503-172L
   + NetServerInfo1: DCC4503-175L
   + NetServerInfo1: DCC4503-177L
   + NetServerInfo1: DCC4503-183L
   + NetServerInfo1: DCC4503-184L
   + NetServerInfo1: DCC4503-185L
   + NetServerInfo1: DCC4503-188L
   + NetServerInfo1: DCC4503-196L
   + NetServerInfo1: DCC4503-197L
   + NetServerInfo1: DCC4503-199L
   + NetServerInfo1: DCC4503-202L
   + NetServerInfo1: DCC4503-203L
   + NetServerInfo1: DCC4503-205L
   + NetServerInfo1: DCC4503-210L
   + NetServerInfo1: DCC4503-213L
   + NetServerInfo1: DCC4503-219L
   + NetServerInfo1: DCC4503-220L
   + NetServerInfo1: DCC4503-228L
   + NetServerInfo1: DCC4503-233L
   + NetServerInfo1: DCC4503-234L
   + NetServerInfo1: DCC4503-236L
   + NetServerInfo1: DCC4503-241L
    StringData: Binary Large Object (586 Bytes)

Learning Windows server 2012 R2 & 2012 core

Hi,
How do i configure a fast and standard solution with 1domain (Windows
Server 2012 R2) and 1subdomain(Windows Server 2012 Core) implemented with a webserver and security for dns?
Thx

Hi
Maybe this can help,
Nslookup test:
cmd => nslookup => set type=mx => host.net.
Organizational unit:.be
Active directory users and computers openen => rmb op domeinnaam => new => organtizational unit aanmaken => Protection uitvinken
Computer Manueel toevoegen aan domein:
1)DNS veranderen naar 192.168.1.1 van het domein zelf
2)Add-Computer -domainname host -cred administrator@host -passthru -verbose
GPO voor chrome installeren:
1)Group policy management => in OU PC's => new policy aanmaken
2)rmb policy en klik edit
3)onder computer => software => new package => pad ingeven waar je msi bestand hebt gezet van chrome => \\S1\netlogon\msi\chrome.msi
4)client heropstarten en aanmelden met domeingebruiker => powershell => Restart-Computer
5)mapje waar MSI in zit => security => domain controller (user) toevoegen met volledig beheer
GPO voor browser block chrome:
3)block listed urls..
4)op client gpupdate
Failed login events:
1)Group policy instellen op OU Servers: Computer Configuration\Windows Settings\Security Settings\Local Policies\Audit Policy\ ==> Failed logins aanzetten
2)gpupdate /force
1)powershell
2)get-windowsfeature => install-windowsfeature SMTP-Server
3)Internet information services => S1 => Domain RMB => properties => Acces tab => Relay => Add => Group computers => IP: 192.168.1.1 subnet 255.255.255.0 => Ok => ok
3b)Eens afmelden en aanmelden met fout wachtwoord zodat er een log geschreven wordt met audit failure in de security log van event viewer
4)Eventviewer security log => op failed audit log RMB => attach => Geef andere naam => next => next start program => program: powershell.exe =>
open the propery dialog aanvinken
5)Run wheter user is logged in or not aanvinken => tabke conditions: start the task only if AC power afvinken! => ok => paswoord administrator ingeven
6)powershell: get-executionpolicy => resultaat moet remotesigned zijn => view tabke => script pane aanzetten =>
Script geven: $smtpServer = ìsmtp2.school.beî
$msg = New-Object Net.Mail.MailMessage
$smtp = New-Object Net.Mail.SmtpClient($smtpServer)
$msg.From = ì[email protected]î
$msg.ReplyTo = [email protected]î
$msg.To.Add([email protected]î)
$msg.subject = ìhacking attempt?î
$msg.body = ìlogin/pwd failure on S1.î
$smtp.Send($msg)
7)Script opslaan in mapje op C schijf => powershell cd naar mapje met script => ls commandoTo configure the time source for the forest
8)Task scheduler openen => naar event viewer tasks => login => rmb properties => actions => powershell.exe edit => add arguments: -command "C:\Script\login.ps1" => ok => password admin ingeven
9)Testen
*Op welke manier kan je je MX records controleren met NSLOOKUP
cmd => nslookup => set type=mx => host.net.
*Commando powershell om Client toe te voegen aan het domein:
Add-Computer -domainname host -cred administrator@host -passthru -verbose
Best practice analyzer:
1)Server manager => klik op dns en op ADDS => Scroll naar onder tot bij BPA => Task start scan => bekijk resultaten:
Vraagje: Welke suggesties zou je kunnen oplossen:
DNS server should have scavenging enabled
De PDC emulator master moet geconfigureerd worden
1)To configure a domain controller in the parent domain as a reliable time source
*W32tm /config /reliable:yes /update
2)To configure the time source for the forest
*w32tm /config /computer:s1.host.net /manualpeerlist:ntp.belnet.be /syncfromflags:manual /update
Tijd moet gelijk zijn van S1 en S2!!
Corefig opstarten in powershell:
1)cd C:\corefig
2)execution policy aanpassen: Set-ExecutionPolicy bypass
3).\corefig.ps1
4)naam veranderen in corefig
Commando om S2 toe te voegen aan het domein in de OU servers:
1)DNS instellen
Set-DnsClientServerAddress -InterfaceAlias "Ethernet" -ServerAddresses 192.168.1.1
2)Toevoegen aan OU servers
Add-Computer -domainname sdhost -cred administrator@host -OUPath "OU=Servers,OU=OU,DC=Host,DC=net"
Herstarten
OPPASSEN HIERMEE ALS S2 ZELF DC MOET WORDEN!
Voorzie je server van de DNS-rol via windows powershell:
1)Import-Module Servermanager
2)Get-WindowsFeature
2)Add-WindowsFeature "DNS" -restart
Remoteaccess:
S1 remote access geven voor administrators bij active directory
view => advanced features enablen
=> Remote management users => HOST\Administrator toevoegen met full rechten
=> Remote Desktop users => HOST\Administrator toevoegen met full rechten
Bekijk welke firewall regel op dit moment Remote Management nog blokkeert en laat
die communicatie toe:
1)Op S2 in powershell: Configure-SMRemoting.exe -enable
2)op S1 => Server manager => manage => add servers => S2 ingeven => ok
3)Active directory installeren op s2 via add roles (via S1)
4)S2 promoveren to domain controller
5)credentials van s1 gebruiken => naam subdomain 'premium'
6)DSRM passwoord: P0wnerken
7)PREMIUM
DNS instellen van s2 zelf
Set-DnsClientServerAddress -InterfaceAlias "Ethernet" -ServerAddresses 192.168.1.2
C2)DNS server instellen op S2 : 192.168.1.2
Toevoegen aan domein premium.host.net => inloggen met admin account van s2 domein
herstarten van C2
Maak†van†deze†tweede†server†nu†een†domeincontroller†voor†het†nieuwe†domein
ìpremiumî.†Daar†zijn†twee†werkwijzen†voor.†Zoek†deze†methodes†op†en†noteer†deze
summier†hieronder:
- Werken met DCPROMO.exe
- Werken met GUI vanop S1
Je†mag†zelf†kiezen†welke†methode†je†toepast.†Noteer†hier†wel†de†commandoís†die†je
toepast:
Werken met GUI: new existing domain to current forest => naam PREMIUM
Netwerkkaarten toevoegen:
VCLOUD => Niet customizen!!!
Firewall disablen S2:
netsh firewall set opmode disable
Op S1 => chrome => ip in url : https://192.168.1.150:446 => proceed => logingegevens:
naam: openfiler
pass: password
Services => CIFS / NFS => Enable => Start
manage volumes => 1GB volume => start cyl = 1, end cyl = 128 => ongeveer 1GB
Add volume group => NFS als naam en 1GB volume toevoegen => Add volume => naar onder scrollen:
Naam: NFS
Bestandssysteem: EXT4 kiezen
*Add new physical volume 10GB: MINSTENS 35 CYLINDERS TUSSENLATEN!!!!
Start cyl = 164, end cyl = 1469, is ongeveer 10GB
Volume groups => Nieuwe aanmaken met SMB als naam => Add volume => volume selecteren en toevoegen => naar uw smb volume group gaan
=> SMB volume kiezen => naam: SMB => MAX Geheugen => EXT4 bestandssysteem
1)Clocksettings zetten via ntp server: ntp.belnet.be (Moet gelijk zijn met domaincontroller waarin je hem toevoegd)
2)DNS zetten van S2
Hostname: of
Primary DNS: 192.168.1.2
Secondary DNS: 192.168.1.1
Gateway: 192.168.1.254
3)Accounts:
Expert view!
*Use windows domain controller and authentication aanvinken
Security Mode: Active directory
Domain / workgroup: PREMIUM
Domain controllers: s2.premium.VAhost.net
ADS realm: PREMIUM.HOST.NET
Join domain: aanvinken
Administrator username: Administrator
Administrator password: Azerty123
*Naar onder scrollen tot kerberos 5: Aanvinken
Realm: premium.host.net
KDC: s2.premium.host.net
Admin server: s2.premium.VAhost.net
Share aanmaken:
1)Shares => klikken op SMB / NFS => Nieuwe subfolder aanmaken: SMBshare / NFSshare
2)subfolder klikken => maak share => bij rechten naar beneden scrollen => Domain admins: PG & RW, Domain users: RO
3)Update
Systeem beveiliging:
1)system => Network access configuration => Nieuw netwerk toevoegen
Name: Sharenetwork
Network/host: 192.168.1.0
Netmask: 255.255.255.0
Type: Share
2)Update
Protocol aanzetten:
Shares => subfolder smbshared => Volledig vanonder scrollen => SMB/CIFS protocol op rw zetten
Connect to share met:
root
Azerty123
Connect Z-schijf met SMB share:
1)RMB op SMB share
2)Map network drive
3)Pad SMB share intypen
4)connecten met share account of finish 1)Private storage en manueel ip adres ingeven
Beveiliging backup:
1)Active directory van S1
2)OP s1 zelf volledig nieuwe OU: "TEMP Accounts" aanmaken => accidentally delete afzetten!!
3)2USers aanmaken die lid zijn van de groep ("member of") Guest
4)Op S1 => C schijf => nieuwe map map aanmaken en delen
5)Op advanced sharing van gedeelde map => Guest 1 Full control => Everyone alleen read rechten
6)Testen op client of je op Guest1 tekstbestand kan aanmaken en via Guest2 op die share map niet.
7)Als het werkt Guest1 verwijderen en bekijk sharing permissions op Guest1 map
*Wat stel je vast bij verwijderen Guest1 via active directory:
De guest account wordt vervangen door een ander account met een lange naam
die full control heeft over de map
8)Guest1 terug opnieuw aanmaken, wat stel je vast?
Guest1 heeft geen rechten meer over de map en de aangemaakte account blijft staan
Recycle BIN:
1)Open Active directory administrative center
2)Klik op uw domein links
3)Rechts => enable Recycle Bin
4)Verwijder Guest1 op AD
5)Guest1 komt te staan bij deleted users/objects op Recycle Bin
6)Mogelijkheid om te restoren
7)Delete OU Temp accounts => Lukt niet onmiddellijk => Omdat er nog objecten in zitten
*Zoek op welke technieken je kan toepassen om een backup te nemen van je Active Directory. Bekijk uiteraard ook welke 2 manieren
er zijn om een backup van je AD terug te plaatsen (Authoritative en non-authoritative):
-13.1.1 Authoritative Restore
Dit proces herstelt de AD na bc een wijziging die ongedaan gemaakt moet worden.
AD wordt hersteld vanaf de backup, de backup overschrijft dan alle andere DC's met eventuele nieuwere informatie.
-13.1.2 Non-Authoritative Restore
Terugzetten van gegevens van de backup. Nadien ontvangt de DC updates van andere DC's die gemaakt zijn sinds de backup.
Backup S1:
Eerst probleem openfiler oplossen:
1)openfiler opstarten vanuit vmcloud
2)cd /etc/samba
3)vim smb.conf (toevoegen: strict allocate = yes) => eerst i voor insert => opt einde escape => :wq voor opslaan
4)/etc/init.d/smb restart
Backup zelf
1)Install windows backup in server manager => add roles => features
2)Open windows backup
3)Action => backup once
4)Different options => Custom kiezen => System State backuppen
5)Remote disk kiezen
6)pad share: \\of\smb.smb.SMBshare
7)Als backup mislukt, de aangemaakte files door de backup manueel verwijderen en backup terug opnieuw proberen
!!!Als openfiler ineens verdwijnd van domein, moet je de tijd nakijken van beiden systemen (moeten gelijk zijn met max 5min verschil)
Restore backup (authoritatief ingesteld)
http://technet.microsoft.com/ru-ru/library/cc816878(v=ws.10).aspx
1)Herstart de domeincontroller in Directory Services Restore Mode Remotely
=> run => Msconfig.msc => stapkes staan in url: http://technet.microsoft.com/ru-ru/library/cc794729(v=ws.10).aspx
2)Restore uw ADDS van je backup a.d.h.v. een non-authoritatieve restore.
Dit zorgt ervoor dat de domeincontroller terug in de staat komt waarop de objecten die verwijderd zijn
er terug bijstaan.
http://technet.microsoft.com/ru-ru/library/cc794755(v=ws.10).aspx
in cmd:
=>wbadmin get versions -backuptarget:\\of\smb.smb.SMBshare
=>wbadmin start systemstaterecovery -version:12/03/2013-12:37 -backuptarget:\\of\smb.smb.SMBshare -quiet
3)Markeer objecten als authoritatief zodat ze niet worden overschreven bij het restoren door synchronisatiefouten
tussen de verschillende domeinen.
http://technet.microsoft.com/ru-ru/library/cc816813(v=ws.10).aspx <== hieraan beginnen
=> open run => ntdsutil
=> activate instance ntds => enter
=> authoritative restore => enter
=> restore subtree "OU=Stagiairs,DC=Host,DC=net" => enter
=> quit => enter
=> Start terug op met de domaincontroller in normale modus dus dsrm opstartmode uitschakelen: Safe boot uitvinken
Nakijken of beide OU's Stagiairs en Guests er nog staan
(In dit geval is OU guests wel verwijderd doordat we maar 1 DC hebben dus de informatie
wordt niet gesynchroniseerd met een 2de DC)
- Debian Machine toevoegen:
Netwerkgegevens: NIC0 / Private management network / static - manual / IP = 192.168.1.3
Als Machine aangemaakt is, nieuwe netwerkkaart toevoegen:
NIC1 / Private storage network / static - manual / IP = 172.16.0.13
op Debian machine:
1)su - => enter => pass: Azerty123 => enter
2)commando: pico /etc/network/interfaces
Voeg volgende lijntjes toe aan het bestand
iface eth0 inet static
address 192.168.1.3
netmask 255.255.255.0
gateway 192.168.1.254
iface eth1 inet static
address 172.16.0.13
netmask 255.255.255.0
CTRL + O (opslaan) => CTRL + X (afsluiten)
3)pico /etc/resolv.conf
veranderd de bestaande lijntjes naar deze:
domain host.net
search host.net
nameserver 192.168.1.1
4)ifdown / ifup van eth0/eth1
IPV6 instellen:
Zelf gekozen ULA subnet:
fdac:1fff:b0b0 (tot dit gedeelte mag random gegenereerd worden vanaf 'fd')
Subnet 1: fdac:1fff:b0b0:4bd0:: /64
Subnet 2: fdac:1fff:b0b0:4bd1:: /64
/sbin/ip
Remote settings toewijzen voor domain users aan clients (en eventueel toevoegen aan domein als dit nog niet gebeurt is)
IPV6 instellen via Netwerkinstellingen (Default gateway openlaten)
       NIC0                   NIC1
S1: fdac:1fff:b0b0:4bd0::1 /64           fdac:1fff:b0b0:4bd1::11 /64
dns: ::1                   dns: fdac:1fff:b0b0:4bd1::11
S2: fdac:1fff:b0b0:4bd0::2 /64           fdac:1fff:b0b0:4bd1::12 /64
(dns: ::1)               (dns: fdac:1fff:b0b0:4bd1::12)
Openfiler: fdac:1fff:b0b0:4bd0::150 /64       fdac:1fff:b0b0:4bd1::1 /64
S3: fdac:1fff:b0b0:4bd0::3 /64           fdac:1fff:b0b0:4bd1::13 /64
C1: fdac:1fff:b0b0:4bd0::101 /64
dns: S1
C2: fdac:1fff:b0b0:4bd0::102 /64
dns: S2
Voor windows server core:
*powershell
   netsh interface ipv6 add address "Ethernet" fdac:1fff:b0b0:4bd0::2
   netsh interface ipv6 add address "Ethernet 2" fdac:1fff:b0b0:4bd1::12
Voor linux: (zowel openfiler als debian)
VOOR DEBIAN 7 (alleen ifup commando gebruiken niet ifdown):
/sbin/ip -6 addr add fdac:1fff:b0b0:4bd0::3/64 dev eth0 (voor debian)
/sbin/ip -6 addr add fdac:1fff:b0b0:4bd1::13/64 dev eth1 (voor debian)
of statisch in /etc/network/interfaces:
iface eth0 inet6 static
address fdac:1fff:b0b0:4bd0::3
netmask 64
iface eth1 inet6 static
address fdac:1fff:b0b0:4bd1::13
netmask 64
pico /etc/resolv.conf => lijntjes toevoegen
=> domain host.net
=> search host.net
=> nameserver 192.168.1.1
=> nameserver fdac:1fff:b0b0:4bd0::1
VOOR OPENFILER eth0: vim /etc/sysconfig/network-scripts/ifcfg-eth0
=> IPV6_AUTOCONF=no
=> IPV6INIT=yes
=> Toevoegen: fdac:1fff:b0b0:4bd0::150/64
VOOR OPENFILER eth1: vim /etc/sysconfig/network-scripts/ifcfg-eth1
=> IPV6_AUTOCONF=no
=> IPV6INIT=yes
=> Toevoegen: fdac:1fff:b0b0:4bd1::1/64
~~ /sbin/ip -6 addr add fdac:1fff:b0b0:4bd0::150/64 dev eth0 (voor openfiler)
~~ /sbin/ip -6 addr add fdac:1fff:b0b0:4bd1::1/64 dev eth1 (voor openfiler)
Risico's gedeelde application pool:
   -1 proces per application pool (=>zwaar proces dat veel resources nodig heeft)
       (als dit proces vastloopt alle websites geimpacteerd)
   -gebruikers kunnen in principe aan elkaars bestanden
1)IIS installeren op S2 via server manager op S1
2)Role services in setup, volledig vanonder => management service aanvinken (dit staat remote management toe)
3)Op S1 Web server zoeken en enkel van IIS de management console installeren zodat IIS van S2 beheerbaar is
4)Powershell op S2:
Invoke-command -ScriptBlock{Set-ItemProperty -Path HKLM:\SOFTWARE\Microsoft\WebManagement\Server -Name EnableRemoteManagement -Value 1}
Invoke-command -ScriptBlock {Set-Service -name WMSVC -StartupType Automatic}
Invoke-command -ScriptBlock {Start-service WMSVC}
In IIS manager op S1 => Add connection => S2.premium.sdhost.net => account: administrator van S2
In IIS Manager => Sites => new Website, 2 website aanmaken
   -'klant1.sdhost.net' Physical path => C:\inetpub\wwwroot\Klant1 => hostname = Klant1.host.net
   -'klant2.sdhost.net' Physical path => C:\inetpub\wwwroot\Klant2 => hostname = Klant2.host.net
In DNS A-record toevoegen:
   -hostname: www
   -IP: 192.168.1.2
Voor toegang via IPv6 ook een AAAA-record toevoegen:
   -hostname: www
   -IP: fdac:1fff:b0b0:4bd0::2
Voor elke site ook een een CNAME-record aanmaken:
   -Alias name: klant1, FQDN: www.host.net
   -Alias name: klant2, FQDN: www.host.net
In deze standaardopstelling schuilen enkele risicoís. Geef twee risicoís die de huidige
configuratie (gedeelde application pool) met zich mee kan brengen:
- Als je een website hebt die zwaar CPU belastend is (zoals foto's herschalen) heeft dit ook effect op je andere websites
- Omdat je websites binnen dezelfde apppool zitten hebben ze eenzelfde identiteit en kun je geen aparte permissies opzetten.
GROUP MANAGEMENT SERVICE ACCOUNT:
New-ADServiceAccount IISPool1 -DNSHostName s1.amhost.net -PrincipalsAllowedToRetrieveManagedPassword Administrator -KerberosEncryptionType RC4, AES128, AES256
Install-ADServiceAccount IISPool1
Maybe you can do this tutorial to, it is a tuto for learning DFS & DNSSEC..
Wat betekent de optie “dnssecok”
   -> Deze optie stelt de dnssecOK bit in voor deze query
   -> Dit verteld de server that de client dnssec verstaat en dat deze server hiervan gebruik kan maken met deze client
Krijg je een bevestiging dat dit een secure antwoord is? (RRSIG)
   -> Neen want de zone is nog niet gesigneerd
Controleer of de client C1 ingesteld is om secure responses af te dwingen bij zijn DNS
caching server: get-dnsclientnrptpolicy. Resultaat?
   -> Het resultaat is niks, vermoedelijk omdat er geen instellingen zijn hiervoor
Probeer opnieuw een request op C1 voor S1 met ResolveDNSName. Is het signeren
van de zone voldoende om secure antwoorden te krijgen op de client?
   -> Er komt opnieuw geen RSIG record dus dit is niet voldoende
Om secure DNS responses op de client voor het domein securezone.lab af te dwingen
wordt in het domein Host.net een GPO ingesteld. (nieuwe GPO voor hele domein).
zoek op en stel deze GPO in voor responses van securezone.lab.
   -> default domain policy -> Edit =>   -> Computer Configuration > Policies > Windows Settings > Name Resolution Policy.
   "In the details pane, under Create Rules and To which part of the namespace does this rule apply, choose Suffix from the drop-down list and type sec.contoso.com next to Suffix."
   "On the DNSSEC tab, select the Enable DNSSEC in this rule checkbox and then under Validation select the Require DNS clients to check that name and address data has been validated by the DNS server checkbox."
   "In the bottom right corner, click Create and then verify that a rule for sec.contoso.com was added under Name Resolution Policy Table."
   => GPupdate /force uitvoeren
   => Dan kan de policy bekeken worden
Je zorgt er uiteraard ook voor dat deze policy toegepast werd op de client (C1) en controleer dit opnieuw met get-dnsclientnrptpolicy.
   => GPupdate /force
   => get-dnsclientnrptpolicy => levert hetzelfde resultaat als op de server
Opnieuw: ResolveDnsName s1.securezone.lab server S1 dnssecok Wat krijg je als antwoord te zien? Wat is de oorzaak?
(Distribueer) Kopieer de trust achor data van de secure.lab zone op S2 naar S1 en importeer die op de DNS van S1 als trusted anchor. (keysetsecurezone.lab)
   http://technet.microsoft.com/en-us/library/hh831411.aspx
opnieuw: ResolveDnsName s1.securezone.lab server S1 dnssecok Krijg je nu een (beveiligd antwoord)?
   ->Ik krijg nu een beveiligd antwoord van de DNS server gesigneerd door securezone.lab met geldigheidstermijn
p23 Distributed File System
Installeer op beide server de “file services role”.
   -> Add roles and features
   -> File services
       -> DFS
Maak een namespace aan (DOCUMENTATION) in je domein hOst.net. Stel de sharepermissions zo in dat de groep ‘auteurs’ schrijfrechten heeft. gewone gebruikers
mogen enkel leesrechten hebben.
   -> DFS manager
   -> Namespaces => Add namespace
maak een folder aan in de namespace DOCUMENTATION met als naam PDF
   -> Add folder
maak een tweede target aan voor de PDF folder
   -> Add target to folder
stel replicatie in tussen de twee folder targets. De inhoud wordt vanaf nu dus gesynct.
   -> Automatisch bij 2de target volg de wizard
Welke andere stappen zijn nodig om een volledig redundant DFS systeem op te zetten?
   -> De folder moeten via DFS geschared staan
   -> De replicatie moet ingesteld worden
maak een diagnostisch raport aan over hoe replicatie gebeurt, en corrigeer eventue vastgestelde problemen.
   -> Rechtermuisknop op de replication object
   -> Create diagnostic report
   -> kies de reports
stel quota’s in. In de map PDF maak je een subfolder CATALOGS aan, maar zorg dat die niet groter dan 10MB kan worden. Stel hiervoor een harde limiet in.
   -> install FSRM bij file services
   -> klik quotas => add quota => kies het bestand
   -> nieuwe quota => 10mb hard aanvinken
   -> save
   http://technet.microsoft.com/en-us/library/cc875787(v=ws.10).aspx
omdat we willen vermijden dat de volledige bandbreedte ingenomen wordt door DFS,beperken we de replication speed tot 2MBps.
   -> Klik op de replication -> rechterkolom kies vor edit replication group
   -> Stel de 2MBps in

Windows server 2012 File replication

Hi All,
I am SQL DBA. But in my current company I am having a new responsibility called IIS Admin.
In my organization, I am instructed to do following activity.
There is a Live Web server(named X) and a user acceptance test Server(named Y)
There is a folder called "Intranet" in both the servers.
If any changes done in "Intranet" of X(any new files created, updated or deleted.....) it needs to be automatically updated on "Intranet" of Y also. But not Vice versa, it should be one way.
At the same time, we need to do changes on Y also.
Both the servers are installed with windows server 2012(Standard edition).
What mechanism can we use to achieve the above.
Please help me in the regard.
Thanks & Regards,
K.P.Senthil Kumar

Hi,
For the file replication, you could use DFS Replication.
Introduction to DFS Replication
http://technet.microsoft.com/en-us/library/cc781091(v=ws.10).aspx
Regards.
Vivian Wang

Windows Server 2012 , File Share, need to create CNAME but not working

I'm doing a file server migration for an old Netapp and I'm moving all the data to a Windows Server 2012 Standard System. I need to be able to have 3+ cnames for the system so I don't impact existing clients. I have read the below
articles and none of them are working.
Currently I'm getting the following error
"The Mapped Network drive could not be created because the following error occurred"
"The target account name is incorrect"
So I have tried the following without any luck, and these fixes below are supposed to work on Window 2008R2, but they don't on Server 2012
1) use DisableStrictNameChecking registry value
2) use netdom to create another hostname that is bound to the server, netdom computername (mysystem) /Add (newsystemname)
3) I used setspn to create an alternative name for the system
4) tried disabling SMB3
Any help on this would be greatly appreciated, I'm sure this is possible just down know now.
Jason

Why don't you just go into DNS and create multiple records for the same IP address?
Or, if you like trying more complicated paths, install DFS and use its distributed naming capability. It can have many, many different names.
.:|:.:|:. tim

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

How to install Windows Server 2012 as a Virtual Machine on Window 7 64 bit machine

Hi All,
I need to install virtual Window Server 2012 on Window 7 machine(8gb ram,64 bit machine).
Please give me the list of required softwares to install. If possible the please give download link as well.
Thanks
mit

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

Error in Installing Exchange Server 2013 (w SP1) Mailbox Role on Windows Server 2012 R2

Hi Team,
Need urgent help in resolution of following error:
Environment Details: VMware ESXi 5.5 (vMotion)
Migration from Exchange Server 2007 (SP3 + RU13) to Exchange Server 2013
Exchange Server: Exchange Server 2013 with SP1 (Latest Installation Media)
OS: Windows Server 2012 R2 - Standard (Latest Installation Media)
Exchange 2013 Roles: Seprated (Mailbox and CAS on Different VMs)
Prerequisites: Installed
Error: Installation gives Error at Step 10 during installation of Mailbox Service
Error Details Below:
Error:
The following error was generated when "$error.Clear();
if ([Environment]::OSVersion.Version.Major -ge 6)
$WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe";
$reg= join-path (join-path $env:SystemRoot system32) reg.exe;
$servicecmd = join-path (join-path $env:SystemRoot system32) sc.exe;
if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"}))
if ((get-service wsbexchange).Status -eq "Running")
Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d
Exchange /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery /t REG_DWORD /d 1 /f";
Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for Windows Server Backup`"";
Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`"";
" was run: "Process execution failed with exit code 1.".

Resolved ! :)
Root Cause: The user account I was using had all the required privileges for Exchange Installation but was not having access to edit the registry of the server. Enable access to registry edit tools and you are good to go.
As an alternate you can also try installing using Domain Administrator account if in case there is an IT Policy constraint in the former method.
Thanks to all.

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Windows Server 2012 R2 print issues

We are using terminal server with Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0. We are using network printers.
There is problem with printing from Adobe Reader. We are using Adobe Reader 11.0.06. Sometimes users cannot print from Adobe Reader with error message "Printer not found" even though we can print on same printer from other software. This problem can be solved by relogging user, but in our enterprise environment, this is not acceptable solution.
Thanks for your help.

I had the same issue with another Canon UFRII that was not on the network. Canon has some monitor software that attempts to query the device and this threw back Invalid Parameter when the device did not exist. Is your device on the network?
Failed for get value IrregularPaper for printer . Error code 87(ERROR_INVALID_PARAMETER)
     InternalGetPrinterDataFromPort
3328
4984       0
0
LOCALSPL_TRACE
Failed for get value udpEnable for printer . Error code 87(ERROR_INVALID_PARAMETER)
Can you use one of the UFR drivers Canon included with the operating system?
Canon UFR II Color Class Driver
Canon UFR II B/W Class Driver
Alan Morris Windows Printing Team

DFS in Windows Server 2012 R2

Similar Messages

Maybe you are looking for