DG Observer triggering SIGSEGV Address not mapped to object errors in alert log
Hi,
I've got a Data Guard configuration using two 11.2.0.3 single instance databases. The configuration has been configured for automatic failover and I have an observer running on a separate box.
This fast-start failover configuration has been in place for about a month and in the last week, numerous SEGSEGV (address not mapped to object) errors are reported in the alert log. This is happening quite frequently (every 4/5 minutes or so).
The corresponding trace files show the process triggering the error coming from the observer.
Has anyone experienced this problem? I'm at my wits end trying to figure out how to fix the configuration to eliminate this error.
I must also note that even though this error is occurring a lot, it doesn't seem to be affecting any of the database functionality.
Help?
Thanks in advance.
Beth
Hi.. The following is the alert log message, the traced file generated, and the current values of the data guard configuration. In addition, as part of my research, I attempted to apply patch 12615660 which did not take care of the issue. I also set the inbound_connection_timeout parameter to 0 and that didn't help either. I'm still researching but any pointer in the right direction is very much appreciated.
Error in Alert Log
Thu Apr 09 10:28:59 2015
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc (incident=69298):
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Thu Apr 09 10:29:02 2015
Sweep [inc][69298]: completed
Trace file:
Trace file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning and Oracle Label Security options
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1
System name: Linux
Node name: <host name>
Release: 2.6.32-431.17.1.el6.x86_64
Version: #1 SMP Wed May 7 14:14:17 CDT 2014
Machine: x86_64
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 29902, image: oracle@<host name>
*** 2015-04-09 10:28:59.966
*** SESSION ID:(416.127) 2015-04-09 10:28:59.966
*** CLIENT ID:() 2015-04-09 10:28:59.966
*** SERVICE NAME:(<db_unq_name>) 2015-04-09 10:28:59.966
*** MODULE NAME:(dgmgrl@<observer host> (TNS V1-V3)) 2015-04-09 10:28:59.966
*** ACTION NAME:() 2015-04-09 10:28:59.966
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
DDE: Problem Key 'ORA 7445 [nstimexp()+71]' was flood controlled (0x6) (incident: 69298)
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
ssexhd: crashing the process...
Shadow_Core_Dump = PARTIAL
ksdbgcra: writing core file to directory '/u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/cdump'
Data Guard Configuration
DGMGRL> show configuration verbose;
Configuration - dg_config
Protection Mode: MaxPerformance
Databases:
dbprim - Primary database
dbstby - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '180'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: dbstby
Observer: observer_host
Lag Limit: 180 seconds
Shutdown Primary: TRUE
Auto-reinstate: TRUE
Configuration Status:
SUCCESS
DGMGRL> show database verbose dbprim
Database - dbprim
Role: PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbprim'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'MANUAL'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbstby'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS
DGMGRL> show database verbose dbstby
Database - dbstby
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbstby'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbprim'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS
Similar Messages
-
Exception [type: SIGSEGV, Address not mapped to object]
Hi,
I'm working on an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
I'm trying to execute the below:
SELECT /*+ CURSOR_SHARING_EXACT */
vc.id_vehicle, gr.geoRouteId, g.name, round(g.length) length_, gr.active,
g.id_user id_user_georoute_owner, gr.grBindUserId id_user_bind_owner,
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
FROM configurator.t_vehicle_configuration vc, dispatch.v_georoute g,
xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
passing vc.x_configuration AS "XML"
columns geoRouteId number path '@id',
active number path '@active',
grBindUserId number path '@id_user',
geoRouteUser xmltype path 'user'
) gr
WHERE vc.id_vehicle = 453
AND g.id_georoute = gr.geoRouteId;but after few seconds I got the error in the object.
The alert log says:
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB2/trace/EVODB2_ora_13769.trc (incident=301686):
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB2/incident/incdir_301686/EVODB2_ora_13769_i301686.trc
The trace doesn't say more:
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
+========= Dump for incident 301686 (ORA 7445 [evahtr()+495]) ========+
----- Beginning of Customized Incident Dump(s) -----
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
The strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.
Do you have any suggestion?
Thanks in advance,
SamuelThe strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.That's probably because you're not using XMLExists correctly.
The function returns a boolean value so you don't need to test for 1 or 0 as we had to with existsNode function before :
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb04cre.htm#sthref360
It's also probably better to use a CASE expression instead of a subquery :
SELECT /*+ CURSOR_SHARING_EXACT */
vc.id_vehicle
, gr.geoRouteId
, g.name
, round(g.length) length_
, gr.active
, g.id_user id_user_georoute_owner
, gr.grBindUserId id_user_bind_owner
, case when XMLExists('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM")
then 1
else 0
end as alm_out
FROM configurator.t_vehicle_configuration vc
, dispatch.v_georoute g
, xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
passing vc.x_configuration AS "XML"
columns geoRouteId number path '@id',
active number path '@active',
grBindUserId number path '@id_user',
geoRouteUser xmltype path 'user'
) gr
WHERE vc.id_vehicle = 453
AND g.id_georoute = gr.geoRouteId
;Even better, you can test the condition directly in the COLUMNS clause with fn:exists XPath function.
For example, something like this :
SQL> with sample_data as (
2 select xmltype('<root>
3 <row><item>1</item><other id="a"/><other id="x"/></row>
4 <row><item>2</item><other id="b"/></row>
5 <row><item>3</item><other id="b"/></row>
6 </root>') doc
7 from dual
8 )
9 select x.*
10 from sample_data t
11 , xmltable(
12 '/root/row'
13 passing t.doc
14 columns item number path 'item',
15 flag number path 'exists(other[@id="x"])'
16 ) x
17 ;
ITEM FLAG
1 1
2 0
3 0 -
SIGSEGV, Address not mapped to object] [ADDR:0x38]
Hi
I am running Oracle Database 11g Release 11.2.0.1.0 - 64bit on Centos 5.9 64bit. The machine has 128GB RAM and 600GB SAS drives.
I daily get following in my alert.log and my database stops running queries.
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x2503528, pfrln0itinit()+60] [flags: 0x0, count: 2]
Fri Aug 09 04:57:21 2013
Sweep [inc][104359]: completed
Sweep [inc][104358]: completed
Fri Aug 09 08:35:49 2013
PMON failed to acquire latch, see PMON dump
Fri Aug 09 08:36:49 2013
PMON failed to acquire latch, see PMON dump
Fri Aug 09 08:38:19 2013
PMON failed to acquire latch, see PMON dump
Fri Aug 09 08:39:19 2013
Some parameters are:
SQL> show parameter sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 12G
sga_target big integer 12G
SQL> show parameter memory
NAME TYPE VALUE
hi_shared_memory_address integer 0
memory_max_target big integer 0
memory_target big integer 0
shared_memory_address integer 0
cat /proc/sys/kernel/shmmax
68719476736
cat /proc/sys/kernel/shmall
16777216
I don't have Oracle support contract therefore cannot contact them for help. Can someone please help?
HabibHabib wrote:
It is doing the same problem just after we put this into production about 3 weeks ago. The machine is hosted at a datacenter and they don't provide Oracle Linux or Red Hat.
From where I sit you have only two alternatives.
1) live it what you have now.
2) pay for a support license & upgrade to supported OS & patched Oracle version
Nobody here can provide any remedy for what ails this combination. -
It comes from alert.log:
Errors in file /opt/oracle/OraHome1/admin//bdump/owps_s001_29137.trc:
ORA-07445: exception encountered: core dump [ioc_kprbrct()+72] [SIGSEGV] [Address not mapped to object] [0x4] [] []
We use OSE to generate HTML pages.
Why is the database dumped sometimes ?It's an OS error. The core dump or trace file will contain information telling you want it was doing and what went wrong. Quite often they map to bugs.
Normally these things require Oracle support to diagnose although sometimes we can figure it out for ourselves.
Cheers, APC -
ORA-07445 : address not mapped to object
Using a ODBC connection to database server to retrieve database
schema information. Basically running queries against sys.all
type tables.
Rec'd ORA-07445: exception encountered : core dump [Kxspoac( ) +
6969] [SIGSERGV] [Address not mapped to object] [1]
Is this a user object lock out issue or just a ODBC and client
configuration or a serious system issue?
any input would be appreciated.I know the documentation is not as good as it could be but you can still see that your code doesn't look like the example given. Specifically, java is case sensitive, so it should be "write" not "WRITE" and the unix wildcard is * not -.
Cheers, APC -
Problem 2950 arp address not mapped to a destination port
I have a problem loosing connectivity to some switch connected directly to my 2950.
I have the mac address in the arp table but when not working the mac-address is not linked to any port in the show mac-address table.
Please helpI think this could be simply a question of aging. The ARP tables are aged out after 4 hours. By contrast, the entries in the MAC forwarding tables are aged out after 5 minutes. All it means is that the host has not sent any frames to or through this particular switch in the last 5 minutes.
There can be other explanations, but they are rare. For example, if your host is actually a service address in a WLBS cluster configured in unicast mode, then the host will source its frames from a different address from the address it gives in response to an ARP request.
Another is if you have port security configured with a timeout shorter than your ARP table. You may have reached the maximum permitted MAC addresses. That would also account for your intermittent connectivity.
But, as I said, these are very particular cases.
Kevin Dorrell
Luxembourg -
Checkpoint not complete error in alert log
version : 10.2.0.5 , 11.2.0.2
This is what I found about "Checkpoint not complete" from google
"+This message indicates that Oracle wants to reuse a redo log file, but the current checkpoint position is still in that log. In this case, Oracle must+
+wait until the checkpoint position passes that log. Because the incremental checkpoint target never lags the current log tail by more than 90%+
+of the smallest log file size, this situation may be encountered if DBWR writes too slowly, or if a log switch happens before the log is completely full,+
+or if log file sizes are too small.+ "
Question1.
What do they mean by Oracle reusing a redo log file ? When one ORL is full , oracle will switch to the next one ; it won't reuse it. Right ?
Question2.
"the current checkpoint position is still in that log" . What is checkpoint position ?
Question3. How often does a checkpoint occur ? (frequency as per time)Question1.
What do they mean by Oracle reusing a redo log file ? When one ORL is full , oracle will switch to the next one ; it won't reuse it. Right ?You have some groups of redo log, each redo log has members with same information. Redo log run in a circular way, when a group is full, changes to the next group of redo log and when the last group is written continue overwritten the first group.
http://docs.oracle.com/cd/B28359_01/server.111/b28310/onlineredo001.htm
Question2.
"the current checkpoint position is still in that log" . What is checkpoint position ?copy and paste from:
http://docs.oracle.com/cd/E14072_01/server.112/e10713/startup.htm#BABGDACG
"A data structure that indicates the checkpoint position, which is the SCN in the redo stream where instance recovery must begin"
Question3. How often does a checkpoint occur ? (frequency as per time)Checkpoints occur in diferents situations, not per time, please check:
http://docs.oracle.com/cd/E11882_01/server.112/e16508/startup.htm#CNCPT89045 -
Quantity not posted to object error in while activity confirmation
Hello All,
i am getting below error while activity confirmation , please help me on this below.
Note : Activity and cost center and KP26 no changes are made compare to preview year and current year , for the fiscal year 2014 i didn't get any error , only for the fiscal year 2015 i getting below error.Dear Hari,
If the activity type of the confirmation has set the flags as
mentioned (indicator MANIST in table COKL is set) the system will simply
NOT post any quantity on the sender cost center/activity type during
the confirmation.
So all quantities which are currently missing (as these were not
updated by the confirmation) must be posted with transaction KB51N.
If you implement the coding corrections of #760437 you have the
possibility to change the message BK263 from "I" to "A" in transaction -
which is however not recommended.
So the advised procedure is:
-post all mising quantities with transaction KB51N first
-then run the report ZRKMANIST_RESET to remove the flag MANIST (which is
the reason why the confirmations did not post quantities on the
sender cost centers)
After this procedure, the quantities will again be updated when you
post confirmations.
Best regards,
Jason -
Not clearable : 1 distinct types of ORA- errors have been found in the alert log.
( Correct me if I'm wrong.)
What could be the reason for the fact that the event "1 distinct types of ORA- errors have been found in the alert log." is not clearable?
Even if the problem is solved, the ORA- error will still be in the alert.log.
Therefore the event would eventually only disappear after 7 days.
Doesn't sound very logical to me.- The event page showing a warning event for "Generic Alert Log Error Status" metric,
- "Generic Alert Log Error Status" event is a statefull metric,
- On each evaluation of the metric defined as 'Statefull', the Cloud Control Agent recalculates the severity,
- This means, EM Agent scans the alert log for ORA errors, "Generic Alert Log Error Status" will return the number of ORA error found,
- Whenever the returned number is grater than the assigned thresholds of "Generic Alert Log Error Status", an alert is raised on EM console,
- On the next scan of alert log file, this alert will be cleared ONLY if the collected value is less than the assigned threshold,
- By checking your system, the warning threshold of "Generic Alert Log Error Status" is 0, so whenever a single ORA error is found in alert log, a warning event will be raised and you will not be able to clear it manually as this is a stateful metric.
There are three cases where this alert can be cleared:
1. The agent found 0 ORA errors in Alert log, then the alert will be cleared automatically
2. Manual clear: By disabling/enabling the metric
3. Manual clear and further not receiving similar alerts frequently: By assigning higher thresholds values
So, I suggest to disable the metric, then, enable it after some time as follows as follows:
- Go to the problematic database home page >> open the 'Oracle Database' drop-down menu >> 'Monitoring' >> 'Metric and Collection Settings',
- Choose 'All metrics' from the 'View' drop-down list >> search for the 'Generic Alert Log Error Status' metric,
- Click the pencil icon under 'Edit' column opposite to the above metric >> remove the Warning Threshold (make it empty) >> 'Continue' >> 'OK'.
- Wait for the next collection schedule in order for the warning events to be cleared, then, enable the metric again with the same steps (setting Warning Threshold=0).
References:
Note 604385.1 Receiving "Clear" Notifications Unexpectedly for 'Generic Alert Log Error Status' Metric
Note 733784.1 What are Statefull and Stateless Metrics in Enterprise Manager - Explanation and Example
HTH
Mani -
Not getting email for alert log error
Hi ,
Any one please answer , I am not getting e-mail alert for error in alert log file .
Please some one guide me with the steps to configure the same.
I need to configure this option in production very urgent.
Thanks in advance.
Anand ManuelHello Eric,
Thanks for using Apple Support Communities.
To troubleshoot this issue where multiple people have not received the Apple ID reset password email, please see the information in the article below.
If you didn't receive your Apple ID verification or reset email - Apple Support
If after following these steps and the email still hasn't arrived, please contact Apple account security by using the link below.
Contact Apple for help with Apple ID account security - Apple Support
Cheers,
Alex H. -
At what point oracle write "Checkpoint not complete" in alert log ?
DB version: 10.2.0.4/RHEL 5.8
During a batch run, we encountered lots of 'Checkpoint not complete' errors in alert log.
Later we discovered that ORLs were sized only 50mb and this DB had only 3 redo log group. Since this is the potential cause, we are going create at least 10 Redo log groups and increase Redo log size to 500MB.
But , I want to know what exactly causes oracle to write "Checkpoint not complete" in alert log ?
For the purpose of this discussion, I am assuming we have only 1 ORL per redo log group. Is my below assumption correct ?
ORL1
|----------------> ORL1 file got full, so, LGWR starts writing to ORL2 file. Checkpoint occurs at log switch
| DBWR writes modified blocks associated with the redo entries in ORL1 to datafiles
|
V
ORL2
|----------------> ORL2 file got full, LGWR wants to start writing to ORL3 file. Checkpoint is initiated at log switch.
| But checkpoint can't be finished due to unknowN reasons
|
V
ORL3
|---------------->Your assumption is only partly right.
I would illustrate it like
ORL1
|
|----------------> ORL1 file got full, so, LGWR starts writing to ORL2 file. Checkpoint occurs at log switch
| DBWR starts writing modified blocks associated with the redo entries in ORL1 to datafiles
|
V
ORL2
|----------------> ORL2 file got full, LGWR starts writing to ORL3 file.
| Checkpoint for ORL2 is initiated at log switch.
|
V
ORL3
|
|----------------> ORL3 file (the last member) also got full very quickly . LGWR wants to start the 'new cycle' by
writing (Reusing) to ORL1. But the checkpoint intiated by the log switch of ORL1 from the previous cycle is
not complete yet !! .
Basically you get this error when LGWR attempts to reuse an online redo log file (ORL1 in the above example) and finds that it cannot.
This is because the remaining ORL files (ORL2 and ORL3) got fully written before DB writer finished checkpointing the modified blocks associated with ORL1 yet.
Until the checkpoint of ORL1 is complete, the DB effectively hangs and user sessions have to wait until LGWR can safely reuse ORL1
Yes a larger redo log size of 10 groups can help. But make sure the I/O subsytem where ORLs are stored has no latency issues. -
Specified Host Directory does not map to your Site Address
I have defined my site using ftp in the Dreamweaver site definitions and I can connect to it and upload changes with no problem. I am now trying to setup InContext editing capability to the site. When I go thru the steps to add a site in the InContext Admin section, the first steps in the process work fine. I am able to fill out the ftp settings with my username and password and when I test the settings it comes back that it is able to connect to the site. The next step is where I run into problems. When I try to add the assets I get an error that says "The Specified Host Directory does not map to your Site Address". I can use the same username and password with an ftp Client program and I have complete access to the root folder and all the files in it. I have used exactly the same Host DIrectory in both my Dreamweaver Remote Setup and in InContext Admin. Why does it work with Dreamweaver uploads and it can not be used to register in InContext?
My site is www.sonautosales.com and my root folder is defined as /www.sonautosales.com/
I have included a screenshot of the error message.Hi Corey:
I just went thru the entire thread trying all the suggestions but
still no luck. The closest I come to getting this registered is using
the following settings.
ftp host: ftp.prioritysalesandservice.com
Passive ftp: unchecked
Username: prioritysales
Password: **** (I do not mind sending you the password if it will
help you solve my problem)
This tests good all the time.
Host Directory: /www.prioritysalesandservice.com/ (This is the folder
name that contains my website and in it is the index.html page)
Image Directory: Images/ (the folder name inside the host
directory that contains my images)
Default Page: Default.htm Default.asp index.html index.htm index.php
index.cfm
I think the host directory I am using because when I put that in and
then use the browse button to find the Image directory it shows all
the files and folders in my Host directory
The website address is: www.prioritysalesandservice.com
Please let me know anything else you need, again I have tried all the
things mentioned in the thread and by using these settings I get the
following error when I save:
The specified Host Directory does not map to your Site Address (URL)
THe "/www.prioritysalesandservice.com/" host directory could not be
accessed through this Site Address (URL):
"http://www.prioritysalesandservice.com/"
Thanks for you help, hope you can figure it out.
Steve -
Contacts address not showing on pad
When I add the following address (not mine) :
5 Disa Hill Close
Knysna
WC
South Africa
and click on it, the map app launches, but dpit finds the wrong address ...it gives 2 suggestions, but they are both incorrect.
If I click cancel, and immediately click 'search' on the search bar, the address is found every time.
I trust this is enough information for you to replicate my problem and to assist in the solving it.
Many thank,
Sproggetthanks, you solved myproblem. i looked in utilities and there it was. what a strange place to put it
-
Why can't Siri locate contact addresses for map directions?
Having an issue with iphone 4s using Siri for locating addresses saved within contacts for map directions.
The problem is only evident on about half of the contacts so far.. the message i get is 'I couldn't find an address for .." even though the contact I asked for clearly has their address saved. I've doubled checked I've used the right address fields and seem fine.
I'm unable to distinguine the problem between the contacts where Siri works as it should and locate the address, and the ones it can't - including my home address.
Very frustating when I want directions in the car for driving and using hands free.
Any ideas guys?!It seems to be a bug in the software. Other people have said it may have so something to do with siri not understanding UK postcodes properly. I don't really know but I seem to have found a solution, although cumbersome.
-Load up your contact from phonebook app
-Tap the address (apple maps should go straight to it)
-Double tap home and switch back to phonebook app
-Delete the address
-Diuble tap back into maps (the pin point should still be there)
-Press the little blue arrow on the pin
-Add to contacts > Existing contact
-Select contact
(Now this is the important bit)
-Tap edit then tap the right hand column off the address section in order to set it as home, work, etc.
-Done
Phew!!
It's long winded I know, but now I can just tell siri to get directions to so and so's home safely while driving without fiddling around tapping buttons.
Sort it out Apple. It should 'Just Work' outside of the US too you know. -
Home address not shown correctly
Hello all,
I just got my first iPhone today, the iPhone 4s, very happy I am.
I also have an iPad 2 both have a similar issue.
In my contact card I have my home address as
84 Beaconhurst Drive
Beacon Bay
East London
5241
South Africa
When I search for this address in maps, the maps more or less finds my address, albeit about 2 km out. However when I click the address on my address card it just slaps a pin in the middle of East London, and does the same for my work address, and any other address I have tried.
When I add a point to a map and try add that to my contact, all that comes up is Eastern Cape, East London.
This leaves me with two problems
1 When I Ask siri what is the weather for tomorrow, I am told, there is no weather for eastern cape, south Africa, despite the fact that the weather app is picking up my location.
2. When I tell Siri, remind me to xxx when I arrive at home, I am told Siri does not know where my home is.
Please help me ASAP, cause that feature is something I have been looking forward to, since I saw the ads.
Thanxthe problem isn't your iPhone - apple uses google maps to determine your location and secondly Siri location based services doesn't play 100% nicely in SA yet - it does work - mine does in Cape Town - weather, location based reminders etc.
try adding your location/s manually to your iPhone by using Maps and then using your address book to add those locations and then try the location based reminders again - might work.
Maybe you are looking for
-
New iPad2, can no longer connect to Wi-Fi
Just got and iPad2, could connect up to Wi-Fi and the Internet (set up bookmarks, etc.), but can no longer get on the Internet. Reset network settings, forgot network, entered data again, turned off Wi-Fi, turned it back on. Still shows iPad 2 is c
-
IPad in recovery mode and can not update.
My iPad mini reset itself and it is now in recovery mode, I am trying to restore and update, but it keeps freezing at 5 minutes. Any suggestions?
-
Number of records in a infocube
Hai, How do we know the number of records in an infocube? I need to know if the infocube I am using is having more than 50 million records. Thanks.
-
Toshiba fingerprint utility cannot unprotect file
Im haveing toshiba qosmio x500 win 7 64-bit. my toshiba fingerprint utility was running fine and i had some files protected by fingerprint password. i have the old settings backup file and (.tofp file) and the fingerprint key file (key file) I recent
-
How to view thumbnail image in Grid before uploading
I am creating a file upload application. I am using a Grid with a filereferencelist object to list all of the uploaded files. I would like to place a thumbnail image of the file in the grid before it is uploaded. I basically used this example from Co