Dialogue panned out on certain DVD players

Great forum all... thanks for many pearls. The problem is on A certain cheap DVD player the dialogue is being panned out. In the FCP timeline if the pan of the stereo pair is 0 I have a similar result to what i am hearing on the player. If I take out the left or right channel on the player the sound returns respectively. The player doesn't seem to be reading the pan setting of -1. What up?
I have searched phasing out and understand the principle of inversing mono tracks cancelling each other out. Also done various tests with different settings and still no dialogue.
Good to be part of the forum.

Is your audio PCM or AC3? If the audio is going out of sync on onlyl a handful of set-top players, the build is probably OK, and your media is probably starting out in sync. I suspect that your bit rate may be be too high, and the audio is chiking the buffer on the player, making the audio go out of sync. What format of audio is on the disc, and what is combined average/maximum bit rate?
Hope this helps -
Max Average

Similar Messages

Audio/video sync issues at chapter points, on certain DVD players

I created a DVD using DVD Studio Pro 4, had it replicated at a manufacturing facility, and have now sent out copies to approximately 600 people. About a dozen or so of my customers have experienced issues where at the chapter points for the film (a 60-minute documentary) the audio and video go out of sync. Unfortunately I can't describe this issue any more accurately than that because I haven't seen the problem. The disc plays fine on the vast majority of players. The people that are experiencing the problem have DVD players like the Sony DVP-NC655P and the Samsung DVD-R120.
Does anyone have any clue at all as to what the issue could be?
Thanks very much.
G5 Dual 2.5 GHz Mac OS X (10.4.10)

Is your audio PCM or AC3? If the audio is going out of sync on onlyl a handful of set-top players, the build is probably OK, and your media is probably starting out in sync. I suspect that your bit rate may be be too high, and the audio is chiking the buffer on the player, making the audio go out of sync. What format of audio is on the disc, and what is combined average/maximum bit rate?
Hope this helps -
Max Average

Error Messages When Burning / Disk only plays in certain DVD players

When burning most all of my DVD's in DVD Studio Pro, after all of the encoding in the burn process and the program starts the initialization, I get a Media Error Calibration Error message. When I retry to burn, everything seems fine. But, my DVD's only play in some DVD players. Others say unreadable disc. Any ideas?

Many times, media can cause your problem, I use Maxell myself, (never had any compatibility issues. Here's a URL to a site that rates the quility of many different kinds of media and there reliability.
It also includes alot of very useful info below the ratings area.
URL: http://digitalfaq.com/media/dvdmedia.htm
G5 Quad Core 2.5GHz & G4/1.2GHz Dual 6GB RAM Mac OS X (10.4.5) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

TS2180 DVDs won't play in regular DVD players iDVD burns with no errors the DVDs always get out into a folder ???

Dear Apple friends The iDVD burns DVDs with-out any error messages but DVDs dont play in regular DVD players I notice that the DVD burns to a folder and there is no setting to prevent this How do you burn the DVD with-out it getting put into a folder ??? Thanks Mike

That often is a result of using inferior DVD disks and burning at too high a speed. What brand and type of disk did you use and what speed did you burn at?
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Burned DVD glitches in some DVD players

Any answers to this one. I burn my 45 minute program to DVD using idvd. It plays fine on computers, also in some DVD players(Sony) but glitches out and stops playing on many lower end DVD players. Why?

Well that is the first time I have heard all that (not saying it isn't true, just that I have never heard that). My reading suggests that DVD-R are more compatible. In any case, here are my tips for a more reliable burn:
Remember that the DVD is the final product. The last step in a long series of steps. Keep this in mind when taping and editing. Use SP mode, not LP mode on the camcorder. Use 16-bit/48KHz audio. I have read that some image stabilizers offered on camcorders can cause editing problems. The best image stabilizer is a tripod. Keep in mind that MPEG2 compression does not like fast motion, so keep your pans & zooms slow and steady... use that tripod.
Note any problems you had capturing or editing. Double-check the material in the timeline. Gaps in audio or video are bad- fill with slugs if nothing else.
Use good quality blank media. The flavor of choice right now are Verbatims but in the end, you need to find one that works best for you.
NEVER put a label on a DVD. Kiss of Death. Enocurage your competition to label their DVDs!!!! As mentioned, DVDs have alot of information on them, labeling them will throw them off balance in many DVD players. Not good.
Use something like an Epson R200 if you want to put a pretty face on the DVD.
Also mentioned was using a slower burn. Your computer will cache information better than a tabletop DVD player. If the tabletop doesn't have what it needs when it needs it... it will choke.
Try to keep all content under 90-minutes. The longer the content, the lower the bit-rate used to encode and the more chances for problems.
Finally, if you have examined all your options and you still aren't happy- move on to a new tool for Authoring your DVDs. iDVD is part of iLife for for $79. DVDSP is $499.
Good Luck,
Mike

DVD studio Pro compatibility issues in DVD players?

Greetings folks,
I thought I was done burning DVD's with DVD studio pro of a dance reception I taped last month. Only tested my product on MAC machines. When I got a call from the client they said they cannot get them to play on their windows 7 machines. Is there a certain type of codec/reader they should download?
Or does it sound like I need to bust out the burning discs again? If that is the case where is the best tutorial for formatting discs so they will play in basically every machine?
thanks,
Mike

First make sure you didn't inadvertently burn an HD DVD. HD DVDs will play in most later model Macs, but not in DVD players or Windows computers.
If that wasn't the issue, ask the client which DVD player software they were using. Windows Media Player is a terrible app for playing burned DVDs - they need to use an actual DVD player app like WinDVD or Cyberlink's PowerDVD.
-DH

Problems playing certain DVDs

Hi.
There seem to be a number of posts with similar issues, but not quite the same.
I've got a PIONEER DVD-RW DVR-107D which has recently begun to have issues playing certain DVDs. It seems selective in it's decision to mount them - playing some, not playing others.... Sometimes, I insert it a second time and it will work, but generally - if it won't show up the first time, it ain't happening.
When they don't work, it makes a horrible grumbling noise before spitting them out.
I can't seem to figure out why some work and others don't....... They're all bought DVDs - nothing burnt or iffy. DVDs that have even worked in the past.
Does anyone have any ideas?
Thanks and I am sorry if this is somewhat reminiscent of other posts.

Hi discarnatequern-
Greetings and welcome to the Apple boards
It sounds like the drive is,about to fail completely. Have you tried a lens-cleaning kit? Some folks have reported success in cleaning the drive.
Luck-
-DaddyPaycheck

Stuttering in stand alone dvd players

I can"t understand why when i burn dvd's they tend to stutter in stand alone dvd players but plays jus fine in my mac dvd player. Can anyone tell me why this happens. Is it the bit rate or the the dvd media. I can't figure it out.

Is the shuttering constant ? If not it could be a support problem.
If it is constant (strobe-like), however then I suspect it's an interlace field order thing.
In this case the ordering of the interlace fields is wrong. But either the DVD player on Mac accounts for a different order than the standard one, or it the process of converting the interlaced signal into progressive (that's how computer displays are) automatically removes the concept of field ordering.
baubau
Davide

HD DVD Burners and DVD Players

Someone recently told me that to have HD Quality video using an HD digital camera such as the HDR-FX1, i need an HD DVD burner, and an HD DVD player. Is this true? Or can I just use my LaCie DVD burner and my Sony DVD player and still get HD quality?

It is unknown at this time what will play in HD DVD players when they arrive. Sony, Apple, HP and other are supporting BluRay(tm) and H.264 as their selected format, Intel, Microsoft, Toshiba and others another encoding technology, some sort of Window Media stuff.
Yes, HD does take 4 times as many bits, and more than that for up to 24 channels of audio; but compression technology continues to improve. WRT H.264, I don't know what it's maximum bit rate is and I've not seen definitive articles on compression artifacts and other concerns on HD material. When HD DVD arrives, many of us will want to see substantial improvements over the best DVD has to offer; I'd really like 1080p rather than interlaced, for example. Bluray certainly has the technical specs to provide the data storage for that. But we'll have to wait and see who wins the technology battles.
Ed.
PS: there was a news article today which said the Chinese are even going to invent their OWN HD DVD standards for a third competing method of creating DVDs. Something about wanting to avoid licensing fees in the Chinese market.

Aspect Ratio Conversion Hardware in DVD Players

We shoot/edit/author product that goes straight to DVD or digital download. It is very unlikely that what I produce will end up broadcast. We are leaning toward shooting new features in 16:9. My question is: does anyone know approximately when DVD players started coming with Aspect Ratio Conversion Hardware as a standard feature? (I have a really old (pre-millenium) JVC at home that doesn't have that.) Our main concern is that we don't want to make the switch to 16:9 only if it is a recent occurrence because we don't want to have upset customers trying to view it 4:3. Any thoughts? Thanks!!
Melanie

Melanie Dupre wrote:
does anyone know approximately when DVD players started coming with Aspect Ratio Conversion Hardware as a standard feature? (I have a really old (pre-millenium) JVC at home that doesn't have that.)
You've either gotten bad advice or simply aren't clued into DVD technology.
DVDs, as a format, launched with anamorphic widescreen. The first discs ever sold by Warners Bros (champion of the format) in March of 1997 contained anamorphic content on one side and pan-scan transfers on another.
Finalized in 1995, the DVD spec clearly states that all players, in order to bear the DVD logo, must be able to letterbox anamorphic content for playback on a 4:3 TV. I still have a DVD player from 1999, and it is indeed able to letterbox.
I've never come across a player sold in the US that wasn't able to letterbox anamorphic material. Are you sure you're not setting the TV Shape (or maybe it's labeled Aspect Ratio) on your player incorrectly?

Burned DVD plays on some DVD players and not others

Hello all,
First, please forgive my ignorance because I do not work with video much and have no idea what I'm doing. Someone created a video that I need to burn so the DVD can play on any DVD player. The folder is titled "VIDEO_TS" and then the files within it have the following extensions: .BUP, .IFO, .VOB. with VIDEO and VTS as the prefixes. the largest file has a .VOB extension. The master disk is a DVD-R and I burned the video on a Verbatim DVD-R which played fine on my MAc, a PC and two DVD players. However, I tried it on two other DVD players and it could not be played. So now I'm trying to figure out how I can created a DVD that will be compatible with any DVD player or create an alternate version that can be played on the machines that currently can't play the DVD.
Does all of that make sense? I've been all over the internet and seen different suggestions for similar problems but I don't want to spend money or waste time trying different tactics that won't solve my problem.
Thanks in advance!

Hi
This is a question very familiar in iDVD forum. I use to answer like this.
• Brand of DVD used matters - I only use Verbatim (more organic dye in these) - but there are other GOOD Brands
• DVD-R - plays on more DVD-players than DVD+R as it plays on even older DVD-players (DVD+/-RW - don't even think of it)
• BURN SPEED - is a major contributor to this problem - I never go faster than x4 - I use as standard x2
There are two kinds a blanc DVD can be burned as
• DATA-DVD - Files from DeskTop just stored on a blank DVD - few DVD-players can play this (only very very new ones and they are rare - if I'm rightly informed)
• Video-DVD - a DVD-authoring program is a MUST. iDVD, DVD-Studio Pro, Burn, Roxio Toast etc etc
I'm told that Compressor can do this - I never got it to deliver a Playable-DVD - BUT THIS IS DUE TO MY NEGLECT !
So when iDVD or Toast creates this very special structured DVD - You find the two (must be there) folders VIDEO_TS and AUDIO_TS (empty) - and if the DVD-player don't find this = it will not play.
Yours - very happy with iDVD and Toast (and DVD-Studio Pro - but this is hard to get right) - Bengt W

What format is playable on dvd players in France

I want to send a home movie to grandma in france but I am confused about what format, NTSC or PAL is used for dvd players in France. Any body know??
Thanks

I want to send a home movie to grandma in france but
I am confused about what format, NTSC or PAL is used
for dvd players in France. Any body know??
Thanks
Getting good quality out of converting NTSC to PAL with the tools we have available is pretty much impossible.
Since most PAL players also support NTSC,I suggest you try sending her an NTSC DVD to see if she can play it.

IDVD created DVD plays on some DVD players and not others, HELP!

Hi everyone,
I just finished a huge wedding photo montage and burned it using iDVD to a standard DVD-R. I popped it into a Sony home DVD player and all went well, and looked great. Next I tried the DVD in a Mintek portable DVD player (so it's easier to take to the wedding and connect to the LCD projector) and the DVD is not recognized. I tested another computer burned DVD (from a wedding video that was burned on a PC) in the mintek and it does work. I also tested the mintek using a standard store bought DVD movie and it worked fine.
Any thoughts on why this might be happening? I've browsed through the prefs for iDVD in search of some "compatibility" options but there aren't any.
The wedding is Saturday so I'm really hoping to get this sorted out quickly.
BTW I'm using the MATSHITA DVD-R UJ-815 (the one that came standard in the original 1GHz, 17" Powerbook)
Thanks everyone!
Dave-G

Your problem is the Mintek portable DVD player.
Some older DVD players will not play the newer burned media.
This is by design to force conusmers to always upgrade and update there equipment to stay a head of the technology curve.
I had the same problem with a 2 year old stand alone player wouldn't play anything I burned. It would play on other computers and on newer stand alone players but not on a 2 year old player. (VERY FRUSTRATING) I bought a new cheap stand alone and quess what , All was good it played.
There are different codes that are on these players that distingish the players capability.
Good Luck.
Don

Burned DVD skips frames (?) on DVD players

I recently used my EyeTV 200 to encode some video, which I then exported to iMovie, and then sent it to iDVD from iMovie. I then burned the video to a DVD using iDVD. The burned DVD plays fine on my computer, but does not play correctly on two stand-alone DVD players (one purchased several years ago and one purchased within the last year). During any significantly speedy motion in the image, the moving parts have a jerkiness to them, sort of like it is dropping frames, but there is also a sort of ghosting effect, where the person moving on-screen is seen in the current frame and last frame's position. It's very distracting, and I can't figure out how to fix it, because the file plays fine at every earlier stage in the process.
The encoding settings in EyeTV are as follows:
MPEG-2
NTSC 720x480 D1
Constant bit rate of 15.0 Mbps
GOP structure: IBP frames
Audio: 384 kbps at 48.0 kHz
The EyeTV file (8.4 GB) plays fine. Then I exported it to iMovie (which seems to be a straight conversion to DV), and it plays fine in iMovie. Then I clicked the "Create iDVD Project" button. I set up my menus, etc, in iDVD, and it plays fine there as well. iDVD is set to encode using Best Quality (the video is 1 hr. 15 min. long). I burned the project to a Maxell DVD-R 8x single-layer disc using a Pioneer DVD-RW DVR-111D*. As I mentioned before, the resulting DVD plays fine using Apple's DVD Player software, but exhibits this weird skipping on both an old and a new stand-alone DVD player.
I have looked everywhere for some sort of preference setting to boost the quality of the rendering in iDVD (thinking that might be the problem), but the fact that the final product plays fine on the computer seems to suggest that that isn't the problem, but I don't know what else it could be. I have plenty of free space on my hard drive, and a dual-processor 1.25 GHz G4 should be plenty of horsepower to encode this thing.
Any insight into this situation would be greatly appreciated. Thanks!
*: The Pioneer DVD burner is an after-market internal drive that I bought from MCE:
http://www.mcetech.com/dvdr16xdt-d.html
which is supposed to be 100% supported by Apple software (I think it's supposed to be the same model Apple uses for their superdrives). However, System Profiler lists it as unsupported:
PIONEER DVD-RW DVR-111D:
Firmware Revision: 1.06
Interconnect: ATAPI
Burn Support: Yes (Unsupported)
Profile Path: None
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
But iDVD and the Finder both recognize it without any complaint (I've also used it to burn several DVD-R discs in the Finder - with no problems).
DP 1.25 GHz G4 Mac OS X (10.4.6) iLife '05
added DVD burner information
Message was edited by: elgrego

EyeTV is what produced the original file. I knew that re-compression could produce problems as I moved from EyeTV to iMovie to iDVD to burned DVD, so to avoid that as much as possible, I put the settings as high as possible - that's why the EyeTV file is an 8.4 GB file for 75 minutes of video, which is a pretty large file for that amount of video.
But like I said, there is no problem with the quality of the EyeTV file, or the iMovie file, or the iDVD file. They all play beautifully. The burned DVD plays beautifully when it is played on the computer. The only problem is when I try to play the burned DVD on a stand-alone DVD player with a TV.

Burned dvd plays on computers, but not dvd players - help?

Hi,
I'm a noobie. I made a movie in final cut pro 5, then converted it to a quicktime movie, then saved it in idvd. The movie plays on all computers, but it's not recognized by dvd players connected to tv's. My questions are:
1. What's a quick way to burn onto a dvd that will be recognized by dvd players that aren't on computers?
2. What's the best way to save the best quality of my final cut movie to a dvd that I can play anywhere?
thanks!

Hi Noob:
Welcome to discussions!
There is no sure-fired way to record to a DVD that every DVD player will recognize. Just too many of them out there.
Try burning a the lowest speed possible (1x to 4x )using a reliable disk like Verbatim DVD-R.
This is worth reading: (I copied it from one of Len Goff's discussion threads...)
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
:)Sue

Dialogue panned out on certain DVD players

Similar Messages

Maybe you are looking for