Dictionary structure or view?

Hi
In 4.6 i decalred view as M_VMVLA, M_VMVLB,M_VMVLC
but the same are not working in ECC6.0 .(For unicode).Is there any standard view for the same ? What shall i use for each above views in ECC 6.0.

Hi
Answer is purely assumption
Pls check OSS note
Note 1093055 - Empty index tables after you upgrade to ERP 6.0
Pls note - Take opinion from BASIS team if you need to implement this Note
Regards
MD

Similar Messages

Dictionary structure with reference to two transparent tables

Hi
I have a question about structures defined as dictionary objects.
Is it possible to define a dictionary structure consisting of the structure types of two transparent tables, i.e. to define a dictionary type that corresponds to something like this:
TYPES:
           BEGIN OF ty_s_tablejoin,
              tab1     TYPE z_table1,
              tab2     TYPE z_table2,
           END OF ty_s_tablejoin.
where z_table1 and z_table2 are both transparent tables?
I need it as a dictionary type in order to pass the structure/table into a function module as an input parameter.
There might be other ways of doing this, but it could be interesting to know if it is possible. Please excuse me if this is a weird question, I'm rather new with SAP.
kind regards
Klaus Stenbæ

Hi Klaus,
You can't create a structure in the data dictionary from two tables. However, you can define tables based on structures then create a structure combining both.
For example;
Create structures ZST1 and ZST2 (containing the fields of z_table1 and z_table2 respectively)
Then create tables z_table1 and z_table2, defining them based on ZST1 and ZST2
Finally create a structure (say ZST12) combining both ZST1 and ZST2
From a practical point of view, ZST1 and ZST2 should not contain the client field as when you combine them the field will duplicate. Add the client field to z_table1, z_table2 and ZST12 before including the structres.
Hope this helps,
Nick

Get the data from the structure OR View

Hi All,
how wud i take data from the structure OR View? when i m writing the select query then its saying that its not defind in data dictionary.
I hav the requirement to develop a report for PM module..
in that i hav all structure like AFVGD,CAUFVD,PMCOEA...
Plz tel me how to write a select quary for this...

Hi,
You cannot select data from a structure.
A structure / work area contains data only at the run-time.
You can select data from views and tables.
The data you need to select will be in Database tables. All you need to do
is to find those table and select from there.
Let me know if you need further help.
Regards,
Rajat

All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

Hi All,
On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
I hope you can help
Colin

Hi Colin,
As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
Check things below:
1. Go to site content and structure logs in site setting to check if there is correct information.
2. Create a new site collection to check if there are items in Site Content and Structure.
3. Switch another computer to check if it can work.
If the issue still exists, I recommend you to post it in the O365 forum.
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Simple Transformation from Adobe Form XML document to Dictionary structures

I have an XML document that I am receiving via email (the XML document is generated from an Adobe Interactive form). I would like to write a simple transformation that will map that XML document to a structure and internal table in my ABAP program. I am new to Simple Transformations and I am having trouble working out how to write a simple transformation for this type of XML document. I would prefer to write a custom transformation rather than using the identity transformation (ID). I would appreciate any help you can provide.
Please refer to the below for an example of the XML file.
This maps directly to 2 dictionary structures that exist within our system containing all of the same components. PIM_REQUEST_HDR has a corresponding SAP dictionary structure Y_REQUEST_HDR and PIM_REQUEST_ITEMS has a corresponding SAP dictionary structure Y_REQUEST_ITEMS.
Can anyone help with some instructions or examples of how to create the simple transformation?
Thanks for your help! We are using ECC 6.0
Sample XML to be transformed:
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<SFPSY>
<DATE>2007-07-03</DATE>
<TIME>07:25:21</TIME>
<USERNAME>TLCITY</USERNAME>
<SUBRC>0</SUBRC>
</SFPSY>
<PIM_REQUEST_HDR>
<MANDT />
<REQ_NUM />
<REQ_DESC>blah blah blah</REQ_DESC>
<PROC_AREA>CTC</PROC_AREA>
<REQUESTED>2007-07-03</REQUESTED>
<REQUIRED>2007-07-03</REQUIRED>
<REQUESTOR>TLCITY</REQUESTOR>
<MOD_TYPE>SAP Note manual changes</MOD_TYPE>
<SAPNOTE_NUM>59549656</SAPNOTE_NUM>
<SAPMSG_NUM>0000000000</SAPMSG_NUM>
<TECH_SCRIPT />
<REASON />
<DEV_ENV>ECC6</DEV_ENV>
<INSTALL_NO>2861655161</INSTALL_NO>
<BASIS_REL>700</BASIS_REL>
<REG_STATUS />
<REJ_REASON />
<APP_DATE />
<REJ_DATE />
<APPROVER />
<REGISTRATOR />
<REG_DATE />
</PIM_REQUEST_HDR>
<PIM_REQUEST_ITEMS>
<DATA>
<MANDT />
<REQ_NUM />
<PGMID>R3TR</PGMID>
<OBJECT>PROG</OBJECT>
<OBJ_NAME>RSDIJOIJSDOIF</OBJ_NAME>
<ACCESSKEY />
</DATA>
<DATA>
<MANDT />
<REQ_NUM />
<PGMID>R3TR</PGMID>
<OBJECT>PROG</OBJECT>
<OBJ_NAME>RRRSDIJOIJS03</OBJ_NAME>
<ACCESSKEY />
</DATA>
</PIM_REQUEST_ITEMS>
</data>

I have solved this one with the help of another collegue.
To simplify, we changed the XML to be as follows:
[code]
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<PIM_REQUEST>
<REQ_HDR>
<MANDT />
<REQ_NUM />
<REQ_DESC>Key required for pricing routines</REQ_DESC>
<PROC_AREA>SD</PROC_AREA>
<REQUESTED>2007-07-30</REQUESTED>
<REQUIRED>2007-08-02</REQUIRED>
<REQUESTOR>TLCITY</REQUESTOR>
<MOD_TYPE>SAP Note: Manual Changes</MOD_TYPE>
<SAPNOTE_NUM>0000000000</SAPNOTE_NUM>
<SAPMSG_NUM>0000000000</SAPMSG_NUM>
<TECH_SCRIPT>TS-2498 Pricing Routines</TECH_SCRIPT>
<REASON>New pricing routines required</REASON>
<DEV_ENV>ECC6</DEV_ENV>
<INSTALL_NO>029</INSTALL_NO>
<BASIS_REL>700</BASIS_REL>
<REG_STATUS />
<REJ_REASON />
<APP_DATE />
<REJ_DATE />
<APPROVER />
<REGISTRATOR />
<REG_DATE />
</REQ_HDR>
<KEY_DETAILS>
<DATA>
<MANDT />
<REQ_NUM />
<PGMID>R3TR</PGMID>
<OBJECT>PROG</OBJECT>
<OBJ_NAME>RVGHT902</OBJ_NAME>
<ACCESSKEY />
</DATA>
<DATA>
<MANDT />
<REQ_NUM />
<PGMID>R3TR</PGMID>
<OBJECT>PROG</OBJECT>
<OBJ_NAME>RVGHT901</OBJ_NAME>
<ACCESSKEY />
</DATA>
</KEY_DETAILS>
</PIM_REQUEST>
</data>
[/code]
This maps directly to 1 dictionary structure that exists within our system containing all of the same components. PIM_REQUEST has a corresponding SAP dictionary structure Y_REQUEST_HDR which is a deep structure and has within it a structure REQ_HDR and a table KEY_DETAILS.
The corresponding simple transformation we have then used is as follws:
[code]
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="root"/>
<tt:template>
 <data>
 <PIM_REQUEST>
 <tt:copy ref="root"/>
 </PIM_REQUEST>
 </data>
</tt:template>
</tt:transform>
[/code]
Alternatively the following 2 options also work:
Option 2:
[code]
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="root"/>
<tt:template>
 <data>
 <PIM_REQUEST>
 <REQ_HDR>
 <tt:copy ref="root.REQ_HDR"/>
 </REQ_HDR>
 <KEY_DETAILS>
 <tt:loop name="KEY_DETAILS" ref="root.KEY_DETAILS">
 <DATA>
 <tt:copy ref="$KEY_DETAILS"/>
 </DATA>
 </tt:loop>
 </KEY_DETAILS>
 </PIM_REQUEST>
 </data>
</tt:template>
</tt:transform>
[/code]
Option 3:
[code]
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="root"/>
<tt:template>
 <data>
 <PIM_REQUEST>
 <REQ_HDR>
 <MANDT tt:value-ref="root.REQ_HDR.MANDT"/>
 <REQ_NUM tt:value-ref="root.REQ_HDR.REQ_NUM"/>
 <REQ_DESC tt:value-ref="root.REQ_HDR.REQ_DESC"/>
 <PROC_AREA tt:value-ref="root.REQ_HDR.PROC_AREA"/>
 <REQUESTED tt:value-ref="root.REQ_HDR.REQUESTED"/>
 <REQUIRED tt:value-ref="root.REQ_HDR.REQUIRED"/>
 <REQUESTOR tt:value-ref="root.REQ_HDR.REQUESTOR"/>
 <MOD_TYPE tt:value-ref="root.REQ_HDR.MOD_TYPE"/>
 <SAPNOTE_NUM tt:value-ref="root.REQ_HDR.SAPNOTE_NUM"/>
 <SAPMSG_NUM tt:value-ref="root.REQ_HDR.SAPMSG_NUM"/>
 <TECH_SCRIPT tt:value-ref="root.REQ_HDR.TECH_SCRIPT"/>
 <REASON tt:value-ref="root.REQ_HDR.REASON"/>
 <DEV_ENV tt:value-ref="root.REQ_HDR.DEV_ENV"/>
 <INSTALL_NO tt:value-ref="root.REQ_HDR.INSTALL_NO"/>
 <BASIS_REL tt:value-ref="root.REQ_HDR.BASIS_REL"/>
 <REG_STATUS tt:value-ref="root.REQ_HDR.REG_STATUS"/>
 <REJ_REASON tt:value-ref="root.REQ_HDR.REJ_REASON"/>
 <APP_DATE tt:value-ref="root.REQ_HDR.APP_DATE"/>
 <REJ_DATE tt:value-ref="root.REQ_HDR.REJ_DATE"/>
 <APPROVER tt:value-ref="root.REQ_HDR.APPROVER"/>
 <REGISTRATOR tt:value-ref="root.REQ_HDR.REGISTRATOR"/>
 <REG_DATE tt:value-ref="root.REQ_HDR.REG_DATE"/>
 </REQ_HDR>
 <KEY_DETAILS>
 <tt:loop ref="root.KEY_DETAILS" name="KEY_DETAILS">
 <DATA>
 <MANDT tt:value-ref="$KEY_DETAILS.MANDT"/>
 <REQ_NUM tt:value-ref="$KEY_DETAILS.REQ_NUM"/>
 <PGMID tt:value-ref="$KEY_DETAILS.PGMID"/>
 <OBJECT tt:value-ref="$KEY_DETAILS.OBJECT"/>
 <OBJ_NAME tt:value-ref="$KEY_DETAILS.OBJ_NAME"/>
 <ACCESSKEY tt:value-ref="$KEY_DETAILS.ACCESSKEY"/>
 </DATA>
 </tt:loop>
 </KEY_DETAILS>
 </PIM_REQUEST>
 </data>
</tt:template>
</tt:transform>
[/code]

Organizational structure graphical view

Hi Friends,
we have problem with the organizational structure graphical view in OM. the system can not read the texts fonts, we don't use english characters. what should we do?
Thanks

Hi there!
Hope you both don't mind but I am piggy backing on your OM discussion. You both sound like have good experience in working with Turkey. I am trying to find a standard infotype to store a Turkish Identification no, SSN, and Local ID card numbers. I am leaning towards IT0185 but first want to check around to see if there are Turkish infotypes specifically for these types of documentation. Your feedback is greatly appreciated.
Thank you in advance.
Dina

"The Dictionary structure or table "*C865" is either not active or does"

Hello experts,
I have a transaction - VKOA. I get the following error on executing this t-code. The program used by this t code is SAPL089C.
The error is
Runtime errors         SYNTAX_ERROR
Occurred on     11/23/2009 at   05:12:58
Syntax error in program "SAPL089C ".
What happened?
The following syntax error occurred in the program SAPL089C :
"The Dictionary structure or table "*C865" is either not active or does not exist."
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
The following syntax error was found in the program SAPL089C :
The Dictionary structure or table *C865 is either not active or does not exist.
Please suggest a suitable solution to this problem...
Many Thanks in adv.
Kunal
Edited by: kunal kotak on Nov 23, 2009 6:53 PM

Hi ,
I will try the solution propesed by Max.
In the meantime, I would like to confirm if there is something related to SAP Note # SAP Note 72121. Refer the following details from the note.
Symptom
When you maintain account determination (FI or SD), you get the error
message:
The DDIC structure or table "*C400" is not active or does not exist.
OR
The system writes a dump with DBIF_NTAB_TABLE_NOT_FOUND, C400 was not
found.
C401 can also appear instead of C400.
Additional key words
Tables C400, C401.
Program: SAPL089C, L089CT00
Transaction: VKOA
Solution as per the note
1. Execute the program RV12A002. On the selection screen, enter Usage C,
Tables 400 to 401.
WARNING: Make sure that you only delete C400 and C401!
Execute the program.
2. Execute program RV12A001. On the selection screen, enter Usage C and
mark 'Reports & Screens'.
Can there be sometihing similar to this for C865 table as well. Just a thought.

Is Structure Layout View a code smell?

I have an application that was built by using a double layered architecture. I needed to have a model where I store essential data about actions in this system.
This system must be able to display these actions on screen and needs to be in a Composite type fashion(an action can contain sub-actions, but also can contain other components like buttons, labels, etc.).
The structure model holds data and structure about actions(but not their positioning). The layout model is an observer of the logic model and holds the position and z-order of all components(actions + buttons + labels + etc.). And lastly there is the View that is an observer of the logic model and of the layout model to be able to display all the components(actions, buttons, etc.).
By doing this I've separated an action into three components(structure+layout+view). This separation was necessary because I wanted to have a layer where I make the decision of which component is under the cursor separated from the layer where I make structural decisions(like adding/deleting actions) and separated from the layer where I display all components. Now I have three layers that combined form one unique component.
The problem with this is that a component becomes formed from three distinct layers and it is a little harder to mantain.
Please tell me if there could be a better design for this problem.
Thanks in advance

The following applies mainly to PHP and web pages, but the principles are the same: http://www.phpwact.org/pattern/template_view.
You want a series of template-generating classes. One option in doing so would be an event model:
interface TemplateComponent {
   abstract public void render(final JComponent parent);
class TemplateManager {
   private TemplateComponent header;
   private TemplateComponent body;
   private TemplateComponent footer;
   public TemplateManager(TemplateComponent header, TemplateComponent body, TemplateComponent footer) {
       super();
       this.header = header;
       this.body = body;
       this.footer = footer;
   public void render() {
       JComponent panelHeader;
       JComponent panelBody;
       JComponent panelFooter;
        // Create a series of JComponent and add to your layout
       // This will be the template layout
      header.render(headerPanel);
      body.render(bodyPanel);
      footer.render(footerPanel);
}- Saish

Find Transparent table name for correspoding Dictionary Structure SRM 7.0

Hi,
I am not able to find Transparent table name for correspoding Dictionary Structure in Webdynpro Component for a field in SRM 7.0.
Please let me know.
Thanks,
Monica

Hi Monica
please tell the transaction name and the name of field seen in webdynpro
regards
andrea

Dictionary structures on minisap

Hi,
I'm working on Minisap installed on my PC.While writing a program that uses dictionary structures like sy-datum, sy-uname or tables like Mara,the system gives an error as unable to interpret sy-datum etc.
what is the error?
pls. help as i'm unable to proceed.
Thanks in Advance,
Sipra Jain

Hi Sipra,
Have you defined MARA table in Tables definition? If not define like this in ur program.
Tables: MARA.
For Sy-Subrc and Sy-datum, Please check in SE11 transaction for SYST table.
Reward points if it helps you.
Regards,
Sudhakar.

ModelNode and Java Dictionary structures

Hi all,
when working with Models it seems it is not possible to bind the context to a java-dictionary-structure, right?
But if I want to use dictionary-structures, for example because I want to set an "output-format" or a "max-length-constraint", then I have to copy the data somehow into valueNodes and valueAttributes, right?
Or am I completely on a wrong track?
Josef

Josef,
you're right. model-nodes (-attributes) can't be changed in any way. but you can create (new) model-nodes that are created to (model)dictionary-structures.
if you want to maintain the attributes like "max-length" you have to create your own dictionary objects, because the model-attributes are derived from the backend.
kr, achim

How to access Dictionary Structure in web dynpro(Where are you GS?) ?

i had made one person Structure in Local dictionary.
i had already this type of value node in my context.
now i want to make an object of that type by code
 IPersonElement person =wdThis.wdGetContext().createPersonElement();
Then it is giving me error type can not be resolved.
Please Help Me....
Regards
Sunny.

I am learning WebDynpro from tutorials i have
in that once they said me to create three views.
 1.Start View
 2.Table View.
 3.Detail View.
In start view 's context there are four elements
 Variable Name Type
1. First_Name String
2.Last_name String
3.Date_Begin Date
4.Date_End Date
then In Controller 's Context I had also created all above elements with same type.
then i mapped all views with controller 's context.
start view 's all elements i map with contoller 's context.
then i had created one structure in local data dictionary.
Name of Structure is Person.
and all above four attributes are also there.
Now i create one value node in Table View type of that is person.
now i had also created binding of table with first_name and last_name.
then in coding

Public Void onPlugfromStartView( )
//@@begin onPlugfromStartView(ServerEvent)
String firstname =
wdThis.wdGetExc_UIController().wdGetContext().
currentContextElement().getCmpCtx_firstname();
String lastname =
wdThis.wdGetExc_UIController().wdGetContext().
currentContextElement().getCmpCtx_lastname();
Date date_begin =
wdThis.wdGetExc_UIController().wdGetContext().
currentContextElement().getCmpCtx_dateBegin();
Date date_end =
wdThis.wdGetExc_UIController().wdGetContext().
currentContextElement().getCmpCtx_dateEnd();
IPersonElement person =
wdThis.wdGetContext().createPersonElement();
Above line is giving me Error that person can not be resolved
person.setFIRSTNAME(firstname);
person.setLASTNAME(lastname);
person.setDATE_BEGIN(date_begin);
person.setDATE_END(date_end);
wdThis.wdGetContext().nodePerson().addElement(person);
//@@end

Please Help Me Sir.

ABAP Dictionary structure for use in ABAP Mapping

Hello, I'm creating an ABAP mapping class which requires me to use standard ABAP dictionary (table) structures (ex.MARA, KNA1 etc) for the mapping as the data coming into the mapping is in that format. I'm creating the ABAP class in the PI server and do not have table structures (MARA, KNA1 etc) in the dictionary in the PI server. What is the efficient way to create these structures (as Z elements) in the PI server's dictionary?
I have the XSD of these table structures. Can I import those XSDs into the ABAP dictionary in PI servers? If yes, how can it be done? Please help!

Yes you can import it as an external definition data and create the data type based on this XSD. Go through the link below for more information on the steps to import and how to use it.
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/frameset.htm

Export Dictionary structure definitions to WSDL or XSD

Hi all,
I need to export some structure definitions from CRM 2007 to a XI instance. I have been told by the XI responsible that the ideal mechanism is that I provide him some WSDL or XSD files so he can import them.
The point is: how do I export my ABAP Dictionary definitions to a WSDL?.
I have tryed to do it already in an indirect way creating an ABAP Proxy, but I always get plenty of errors there and I am sure that has to be a faster and more elegant way to do it.
Thanks in advance, lot of points for the one who solve it ;-).
Best Regards,
Luis V. de P.

Hi Gonzalo,
I dont think even if you convert into xsd it will go. The best would be to use XMLAnonymizerBean in your sender communication channel. Please see stefans blog for this:
/people/stefan.grube/blog/2007/02/02/remove-namespace-prefix-or-change-xml-encoding-with-the-xmlanonymizerbean
Regards,
---Satish

Contoling structure of view.

Hi,
Can we define the column datatype sizes during creation of view.
Let us consider the following view creation script.
create or replace view cmonlftWCr
select custcd,custnm,excldlryn,exdlrfrm,to_char(billdate,'YYYY-MM') Month,
sum(billqty) MthQty,mqtycrt(sum(billqty)) MthQtyCrit
from billdtl1
group by custcd,custnm,excldlryn,exdlrfrm,to_char(billdate,'YYYY-MM')
order by excldlryn,custcd,to_char(billdate,'YYYY-MM')
This creates the required view. but with the following structure.
SQL> desc cmonlftWCr;
Name Null? Type
CUSTCD NOT NULL NUMBER(7)
CUSTNM NOT NULL VARCHAR2(50)
EXCLDLRYN NOT NULL CHAR(1)
EXDLRFRM DATE
MONTH VARCHAR2(7)
MTHQTY NUMBER
MTHQTYCRIT VARCHAR2(4000)
My problem is with column mthqty and mthqtycrit.
I want mthqty should have the datatype number(9,3) and mthqtycrit should have the datatype char(3). The function mqtycrt returns only character string of 3 character long.
Can anybody help me out in this regard...?
Soumen.

Hello
You just need to use the CAST operator:
SQL> create or replace view dt_test_view as
2 select
3     '1' as col1,
4     CAST ('1' as NUMBER(1)) as col2,
5     CAST ('1' as VARCHAR2(10)) as col3,
6     '01-JAN-05' as col4,
7     CAST ('01-JAN-05' AS DATE) as col5
8 from
9     dual;
View created.
SQL> select * from dt_test_view;
C       COL2 COL3       COL4      COL5
1          1 1          01-JAN-05 01-JAN-05
SQL> desc dt_test_view;
Name                                      Null?    Type
COL1                                               CHAR(1 CHAR)
COL2                                               NUMBER
COL3                                               VARCHAR2(10)
COL4                                               CHAR(9 CHAR)
COL5                                               DATEHTH
David

Dictionary structure or view?

Similar Messages

Maybe you are looking for