Diff tool - Bug with comments not escaped

Diff tool in version 3.1.07
I have a new table that includes comments on the columns. Some of those comments have single quotes in them like in the words "don't" or "user's". The diff script is not escaping those quotes in the CREATE TABLE DDL so the DDL fails.
Another issue is that semicolons are not placed at the end of CREATE OR REPLACE FORCE VIEW statements.
Edited by: EdInWisconsin on Feb 13, 2012 8:39 AM

Found another issue:
Forward slashes not placed at end of statements to create/replace packages or procedures. This caused several of my procs to run together and was pretty obvious once it happened but easy to miss when reviewing the script and obviously caused problems.

Similar Messages

Pointing out a bug with Z10 not connecting wirelessly to BBLink

After troubleshooting the following problem - BBLink does not recognize the Z10 wirelessly even though it is recognized by every thing else on the router's netowrk - I have discovered:
(1) it works the first time you connect the phone wirelessly with BBLink
(2) It does not connect to BBLink through wireless from then on.
(3) The ONLY way (I tested everything I could think of or look up in the forums*) to establish the connection again is to do a battery pull.
(4) Then the next time you try to establish a wireless connection to BBLink it does not connect (back to point 2 ...)
*I tried:
Rebooting computer
Rebooting phone
Rebooting wi-fi router
Restarting BBLink
Re-install / repair existing installation of BBLink
Removing my Z10 from BBLink and setting it up from scratch
Activating / deactivating / reactivating all options in BBLink
Changing every "Setting" and option on the Z10 in regardes to wi-fi connections and applications using wi-fi to connect to my computer (they all work properly; i.e. I can use wireless to access folders on my computer, as setup using BBLink)
Uninstalling BBLink (and using a third-party program to scrub all files and registry entries)
Clean install of BBlink

Are you saying that 802.11g cards were the first to support WPA?
Some disambiguation is needed. Speed is not the issue here, but WPA compatibility. I'm in the same boat. However, for about 6 months, my TiBook w/Original Airport Card did indeed connect using WPA (at 802.11b on a "b/g" network)...but no longer...others on these boards have had the same experience.
My expanded comments are in this thread: <http://discussions.apple.com/message.jspa?messageID=12466697#12466697>
Message was edited by: Scott in Boston

Photoshop Elements 11 bug with Yosemite not with Maverick

Dear all,
Since I upgraded my OS from Maverick to Yosemite on my Macbook Air, I have a new bug in Photoshop Elements 11 : when I move an element and release the left click, the element return to its initial position. It's very frustrating.
Steps to Reproduce:
1. Create a new element text
2. Move it with the left click to another place
3. Release the left click
Expected Results:
I expected that the element stays in the new position.
Actual Results:
The element return to its initial position. So the move doesn't work.
I can only move the element with the arrows of the keyboard but that's not the best way.
Thank you for your help on this,

Hi,
Are you using track pad for this operation?
If yes, please use mouse instead and see if your issue is resolved.
Thanks!!

Preview glitch when searching for words on page and when using text tools to write comments/notes on .pdf slides, why?

When using Preview to access my class notes as .pdf files, I have encountered extremely frustrating glitches when trying to search for specific words or phrases within the .pdf files and when trying to use 'text tools' to write notes on the .pdf slides. Preview did not behave in this manor with Mountain Lion OS. This seems to correlate with my recent upgrade to Mavericks OS.
When using the search function you should be able to type in any number of letters or words and press enter to continually cycle through the highlighted findings that match what you have typed in. Instead it now, typically, stops tracking what I type in after about 3-4 letters and the yellow highlight turns grey. Once it does this if you try to press enter to cycle through what it has found it no longer cycles. It never did this in Mountain Lion using the very same .pdf files I had previously used in the old OS, and it does this despite there being multiple matches for what I am searching.
When clicking 'show edit tool bar' button and then 'text tools' button to be able to free text notes on the .pdf file I have to exit out of the 'text tools' mode to be able to advance to the next page. This is extremely inconveneint and, again, Preview did not do this in Mountain Lion.
These are my two major complaints about Preview that I have discovered so far in my short time using it with the new Mavericks OS.
Any help would be very much appreciated.

I have this issue too and was pleased to find this thread. Did either of you find the source of the problem or how to fix it?
I've tried using Wondershare PDF Editor as well and wondered that had messed some settings up. Have either of you used that?
If so, how would I revert to a clean version of Preview?
Hope we can get this sorted.

' ' bug with WebService not fixed in beta2

Hi,
There was a very popular bug in Flex3 with double escape, resulting in getting '<' instead of '<'
when using WebService, see bugs SDK-18321, SDK-15031, SDK-19811.
That was fixed in SDK 3.5
I just hit it with AIR2 beta2 app, same scenario.
When does Adobe plan to fix it with Flex4 ?
Any workarounds in Flex4 in the meantime ?
Thank you,
Oleg.
Message was edited by: olegkon

Yes, same thing here. Takes ages to lower to infinity.
Wish it would be as fast as this:
Create four nodes, open the Automation Event List (Ctrl Cmd E), change the second value to 0 (instead of 90) and hey presto, it gets very quiet indeed.
/J

Really interesting bug with Compiz, not sure how to label it

Hi forums, I really promise I searched around for this, so if this is a super common bug, I apologize in advance (I really wasn't sure how to even label what was happening). All I know is that when compiz is enabled, I'm getting super weird behavior in programs, mostly with terminal and system menus. The only way I know to show this is by a screenshot:
http://i66.photobucket.com/albums/h248/ … 0c7d62.png
As you can see from the pic, there are multiple menu objects highlighted (I promise I don't have 3 mouse pointers!). I couldn't capture this via screenshot, but the highlighted elements are actually alternating between this set and another. I could show more instances of this, but I think it would just be redundant. Another (possibly related) issue is the odd behavior in terminal. When I am using terminal to do something, be it accessing the AUR repository or editing a file somewhere, or anything really, the terminal scrolls up and down exactly 1 line, repeatedly (very fast). The only other place I experience significant issues is with compizconfig settings manager (ccsm). When trying to access a different menu, the ccsm window flashes very quickly back and forth to the previous menu screen. All of these things make it incredibly difficult to make selections. My browser (chrome) is fortunately exempt from this dilemma.
The only thing I know for sure is that this is caused by compiz. Disabling compiz (going back to xfwm or using another window manager) eliminates the issue. I hadn't had this issue until yesterday, but I really hadn't changed anything.
Things I've tried:
- Reinstalling compiz
- Enabling/Disabling Emerald
- Installing compiz-bzr
- Fooling with metacity
- Restarting
Any advice or words of wisdom on this would be very appreciated
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Thanks for the reply. I'm actually using a slightly older nvidia gpu (480 GTX) with nvida-340xx, which is what nvidia recommends. I've worked with changing video driver parameters, and nothing there has seemed to change this much. I was afraid this was being caused by a mistake of mine, but it seems more and more likely that this is a problem with compiz: to test, I made a virtual machine and installed arch there (same setup as mine, only completely fresh) and I'm having the same issues. I like compiz because of the amazing ability to theme and control the general appearance of my gui. Is there a good alternative that one of you all could recommend?
Last edited by MaroonR (2014-11-01 05:45:46)

Replying to ical invitations with comments (notes)

How can I reply to iCal invitations but with the addition of notes ?
I can do this on my iPhone / iPad but I cannot see any possibility on the OSX calendar.
I am using iOS 6 and OSX 10.8.2

+1
Plus, you can't accept an invitation with adding an attachment...

Why don't some apps sync with comment not authorize for computer and go authorize computer at store. The computer is an authorized computer. What to do?

I sync my iPad to computer and get the following message: "some of the purchased items on the iPad, including 'Angry Birds', could not be transfeered to your itues library because you are not authorized for them on this computer. to authorize this computer for items purcchase from the iTunes store, choose Store>Authorize This computer.
I don't understand because the computer is one of my authorized computers. What am I missing?

I have had this problem and after some time noticed that the apps that i couldnt put on my new computer were downloaded with a different ITUNES ID.
e.g.
I downloaded about 50 under [email protected] which was my account.
There were about 10 under [email protected] which is my daughters account (she used a $20.00 itunes card)
And a couple were from my sisters account [email protected]
i logged into those accounts and authorised the computer for each ID and it worked fine... You just have to remember what ID's downloaded each item. (app, song, etc) Log into each ID, authorise, then Sync....
Hope this helps..
Troy

Problem/bug with AIR 3.0

Hi guys,
I'm here again. I got this error when I tried to publish my project with AIR 3.0.. Actually, I've created an application usign AIR 2.6 (default comes with CS 5.5). It was used to get published and I used to update it on regular basis. Few days back I had to copy AIRSDK3 folder to Adobe's program files' folder, where I renamed AIR2.6 to anything else and AIRSDK3 to AIR2.6... Today, when I tried to publish my same project, I got this following error. Hope that would help adobe (as it is beta version).
(By the way, when I renamed the folders to their original names, it worked and published).

Steve,
We have seen the same thing and reported it to Forte. We have not yet
heard back with a bug report number...
For now, we have removed all comments from our sql code.
Derk
>
We have just switched from version 2.0.H.1 to version 3.0.F.2 in development,
and have discovered a bug with comments in SQL code.
Anywhere in a cursor definition, or within SQL code in a method, if we use the
multi-line comment format "/* ... */" even on a single line, then the code
compiles fine, but crashes at runtime with a "Invalid SQL Command" error. It
looks as though Forte is including the comment as part of the SQL!
Has anyone else seen this problem? We have not found it in the known bugs list
for 3.0.F.2 or the fixed bugs list for 3.0.G
This worked fine for us prior to version 2, and if we don't get it fixed in
Forte, it means a lot of rework to change the existing comments to single-line
"// ..." format.
Regards,
Steve Isaac
Senior Consultant, Information Services Group
Hydro Electric Corporation of Tasmania
4 Elizabeth St, Hobart, Australia, 7000
Phone : +61 03 6230 5161
e-mail: [email protected]
Check out: http://mama.indstate.edu/users/sodana/lucado.html
*** Derk Norton ***
*** U S WEST Communications Voice : (303) 965-8772 ***
*** 1801 California Street FAX : (303) 896-3565 ***
*** Denver, Colorado 80202 Email : [email protected] ***
**********************************************************************

How do I accept comments/notes?

I have a document with comments/notes and need to know how I accept the comments/notes and remove the marks in the text.

Restore from backup. See the restore topic of:
iOS: How to back up

Bugs with iOS 4.0.1?

I'm having trouble saving the changes I made to my note. It seems to me that iOS 4.0.1 may have bugs with the "Notes" software.

I posted on this topic in another thread and I think I have an answer for you. Here's the thread with my solution:
http://discussions.apple.com/thread.jspa?threadID=2530080&tstart=0
My brother's iPhone had this issue. We solved his problem. Hopefully this info will help you with your problem.

BUG in Oracle SQL Developer 3.0.04 on the "generating DLL" with comments?

I'm newbie on oracle, but I think that I found out a bug in Oracle SQL Developer version 3.0.04 on the "generating DLL" tool using "comments".
I will describe the steps that I gave:
I created a view, but after I test it I had to change my “where” condition, so I comment the old code and then I wrote the new “where” condition below. After I done that I tried to look at the sql code of my view using “generating DLL” tool, but oracle sql developer only shown me half of the code, a lot of code were missing. Then I began with some test trying to understand what happen and I notice that if I put an invalid sql code in my comment the generating DLL start working with no problems, for example(pseudo-code):
(COMMENT WITH VALID SQL CODE the "Generating SQL" don't work:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where time_stamp = (select max(time_stamp) from .....)
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
Generating DLL returns this(when the error occurs):
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
(COMMENT WITH VALID SQL CODE the "Generating SQL" work with no problems:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
I believe that "Generating DLL" tool have some problem with the comments, I also used /*...*/ to comment but the problem is still active.
I notice as well that if I started to add some more comments along the code, the conditions migth change, so I think the problem is related with "comments" code.
Would you mind telling me if this is a real bug or if I'm doing anything wrong.
Thank you in advance,
Rodrigo Campos
Edited by: 894886 on 3/Nov/2011 5:29

Hi Rodrigo,
Thank you for reporting this. The only bug I see currently logged on a comment affecting the generated View DDL involves ending the last line of the definition with a comment, which treats the ending semi-colon (even if on a different line) as part of the comment. That is actually related to a low-priority bug against an Oracle database API.
Unfortunately, your pseudo-code is a bit complex. Trying a few quick, simpler tests against the standard HR schema did not reproduce the issue. I tried INNER JOIN, and nested SELECTs. It would help greatly if you could provide a test case compilable against one of the standard schema, like HR or SCOTT.
Regards,
Gary
SQL Developer Team

Commenting tools available with SDK in v. 9?

I have an application which opens a PDF file in Acrobat, using the SDK, and allows the user to add comments/annotations and then save the document. I have been unable to use Acrobat 7 or 8 in my application because the commenting toolbar is unavailable unless a comment repository has been configured - this is unsuitable to my application, I need the changes to be saved directly to the PDF on the users's computer.
I wonder if anyone can confirm or deny that this behavior will be the same in Acrobat 9. My users are having problems because they are stuck using Acrobat 5 or 6, both of which have stability and compatibility issues.
Thanks to any who can give information.

Leonard,
I have seen several articles indicating that Adobe has announced an Acrobat 9 release in the next few months. Here are two of the most definite:
http://www.appleinsider.com/articles/08/04/01/piper_on_iphone_shortage_as_update_sign_acro bat_9_for_mac_soon.html
http://www.planetpdf.com/enterprise/article.asp?ContentID=This_week_in_PDF_-_PDF_Office_Su ite_and_details_on_Acrobat_9_released
I was assuming there would likely be some folks reading this forum who have seen the product in beta. Sorry if I didn't make that assumption clear.
With regard to your other questions, I am using the methods documented in the Acrobat Interapplication Communication Reference, specifically the OpenInWindowEx method of the AcroExch.AVDoc class. And no we are not using Adobe Reader, we are using the full Acrobat product.
I'm not sure how to answer your request for more information about my application details. As I said, the application displays a PDF file in a window, using the API calls mentioned above, the user adds comments to the PDF and the application causes the changes to be saved by invoking the appropriate API call. I can't think of any other information that would be relevant, regarding how our application works.
The OpenInWindowEx method, when used with Acrobat 7 or 8, will cause an Acrobat window to appear, but without commenting tools, unless a "comment repository" has been configured in the Acrobat preferences. I don't have the relevant version of Acrobat installed, so I can't be more specific than that at the moment. The use of a comment repository is totally unsuitable to the nature of my application, as I stated before, so I am stuck using older versions of Acrobat.
Thanks for your reply and for your attempt to help. Let me know if my answer has not cleared things up.
Lewis

Bug with selection tool in Photoshop CS

Hi there,
I find a bug with photoshop.
I work on video editing, so I usually create some image with not square pixel. In DV for exemple, we use 1,066 pixel ratio.
So I create a layer in full screen for DV editing (720*576 pixels for PAL in Europe) with 1,066 pixel ratio.
If I want to delete a area with 720*576 ratio, I use the selection tool and I select (keep the ratio 720*576) ... but the area wich I delete Is not really the correct ratio 720*576 !! Because, If I create a layer with the object tool (create a rectangle) with the correct ratio 720*576, It isn't the same shape as my old area.
So I think there is a bug ... isn't it ?
PS : sorry for my english, but I'm french.

I have test this problem with a friend on a CS3 version.
There is the same problem !
But we don't have the CS4 ... anybody want to test this ?

(SOLVED!) Bugs with Microphone (X-Fi Soundcard) on Voice Tools (Teamspeak 3)

My PC:
Mainboard: ASUS M4A89GTD PRO
Voltage : BEQUIET! Straight Power 580W
CPU : AMD Phenom II X4 965 Black Edition 3,40GHZ
RAM : OCZ 2x2GB Dual Kit 333
GFX : MSI Radeon R5770 Hawk
Sound : Creative X-Fi Fatalty Titanium PCIe
Headset : Speedlink Medusa 5. Progamer Edition (with Cinch! no USB crap..)
OS : Microsoft Windows XP Professional x64 Edition Version 2003 SP2
Hi, i've got the X-Fi Fatalty Titanium Soundcard since last day and im really happy about that soundcard.
But......
Ive gotta real problem now.. when i starting a voice program like Teamspeak 3 or ICQ / X-Fire whatever..
my voice is crunshing, sounds like overdri'ved. i tried every settings on that drivers but it wont work.. and the best is.. when i start to listen myself on windows to check how my voice is on it.. it is clear and fine. Only on Voice Tools are this crap sound.. i really dont know anymore what i can do also to smash the card outta my window..
what i've tried :
All Driver / Stuff deinstalled.. cleaned with Driver Sweeper / Driver Cleaner Pro and TuneUp Registry Cleaner
and i've tried the old stuff on CD inclusi've the latest Driver for my OS (Windows XP Professional x64) "2.7.0007"
it dont work.. got the same bug
i've tried the Final Edition of Pax Drivers 200 Suit... and same thing....
at last i've tried the latest driver 2.7.0007 with the latest Console Center "2.6.09" but also.. the sound on Voice Tools always craped again..
and i got on Games like Call of Duty 4 always some sound bugs like a shot is repeat or some other sound is repeat or strange cut.
this all makes me really sad...
i would be looking forward if anyone here got a idea how to fix this problem..
l8er

FRe: Bugs with Microphone (X-Fi Soundcard) on Voice Tools (Teamspeak 3)?so... i keeped this settings as ussualy for the future for other guys they got maybe the same problems with voicetools and microphone settings on X-Fi cards..
i installed the actuallay driver settings and all programs for the X-Fi..
after that i restart my PC and going into the BIOS and activated my Onboardsoundcard.
when i start my windows again i installed the HD Realtek Drivers and Programs... after restart i choose on System--> Audio etc..
Soundinput ---> Realtek
Soundoutput ---> X-Fi
now it works for me great.. i got no Microphone bugs anymore on Voicetools and also i got a really really great sound from the X-Fi on Games and Music.
I hope i have some guys help with this art of solving that problem.. sry but i've tryied 0 different ways of Driver settings and i tryied Daniel_K Drivers / Pax Drivers and old Creative Drivers... nothing solved my problems..
oh and of course if u got some noise sounds like a pipe sound but really high and not really loud just like u can hear what the Computer is working inside your headset.. make the newest Creative Drivers on it.. there must be a new setting who Mute this sounds.. i got no signals anymore in my headset how the PC is work.. all is silence when i do nothing.. its really chilled
So.. bb and l8er for u all..
oh.. and thx for "no" support after all in the last 2 Days here..
P.S.
this will be the last Creative Card for me @ Creative Firm.. no kidding.. i've payed 26? for the badest support and the badest worked drivers i've ever seen in my life.. i hope there will be more rivals in future for u.. so u can stop to think about?u can?make the worst support at?all to the clients who buy your stuff..
Best Regards
Kyrane

Diff tool - Bug with comments not escaped

Similar Messages

Maybe you are looking for