Pointing out a bug with Z10 not connecting wirelessly to BBLink

After troubleshooting the following problem - BBLink does not recognize the Z10 wirelessly even though it is recognized by every thing else on the router's netowrk - I have discovered:
(1) it works the first time you connect the phone wirelessly with BBLink
(2) It does not connect to BBLink through wireless from then on.
(3) The ONLY way (I tested everything I could think of or look up in the forums*) to establish the connection again is to do a battery pull.
(4) Then the next time you try to establish a wireless connection to BBLink it does not connect (back to point 2 ...)
*I tried:
Rebooting computer
Rebooting phone
Rebooting wi-fi router
Restarting BBLink
Re-install / repair existing installation of BBLink
Removing my Z10 from BBLink and setting it up from scratch
Activating / deactivating / reactivating all options in BBLink
Changing every "Setting" and option on the Z10 in regardes to wi-fi connections and applications using wi-fi to connect to my computer (they all work properly; i.e. I can use wireless to access folders on my computer, as setup using BBLink)
Uninstalling BBLink (and using a third-party program to scrub all files and registry entries)
Clean install of BBlink

Are you saying that 802.11g cards were the first to support WPA?
Some disambiguation is needed. Speed is not the issue here, but WPA compatibility. I'm in the same boat. However, for about 6 months, my TiBook w/Original Airport Card did indeed connect using WPA (at 802.11b on a "b/g" network)...but no longer...others on these boards have had the same experience.
My expanded comments are in this thread: <http://discussions.apple.com/message.jspa?messageID=12466697#12466697>
Message was edited by: Scott in Boston

Similar Messages

Out of no where, will not connect wirelessly.

I just purchased a Windows 8 pc. However, I take such good care of my techie things I still have an old Toshiba laptop about 8 years old, maybe a little less that runs just great, it's just the technolgy was getting a little behind. It's the old style "tablet" that has the swivel screen and was considered "heavy" accord to our standards today.
The Toshiba Satellite (circa 2005) laptop is an XP with all the updates and service packs. I keep it lean and clean with Advanced System Care, have for months with no problem. It was always used to connect wirelessly.
About the middle of February I switced from Verizon slow DSL to Comcast because we have no other choice for a faster speed. No FIOS. But, I've come back a full 180 to Verizon. However I did get a new modem, the latest advances. It's a D-Link ADSL2+ (DSL2750B) Supposed to run 3 to 6 times faster than the old Verizon modem I had. When I first connected to the DSL I turned this laptop on, connected wirelessly and it was there great going! I was even hitting almost the top speed I am provisioned for wireless. The modem is only 2 feet away but still. I turned if off, turned my attention back to the new Windows 8 machine for a day couple of days
Then I wanted to go back and check the Toshiba XP and revel in it's great performance on this new modem .... drat!! It detects all local stations, even of course mine, but when I try to connect it tries but fails and jumps to a neighbors DSL. I can however connect with the Ethernet cord.
I've been using this Toshiba Tablet for months with a USB wireless adapter just fine that a friend gave me. In fact either the internal wireless adapter and the USB worked with not a problem but tests seemed to show his gift of the adapter was a little faster, so I use it exclusively.
So neither wireless adapter, internal or USB will connect to my modem. I even tried pressing the WPS button on the modem, the one that's lets someone near log on without a password.
So there it is. Can anyone have a clue why this worked at the first and now won't? Also, all other pc's, including a netbook with XP and a new small android tablet are connecting no problem. It's the Toshiba laptop alone that for some reason ...
out of no where, will not connect wirelessly. Is there an easy fix than uninstalling drivers? But why would both adapters get a corrupted driver at the same time? I hope there is help here. Thanks so much for reading this and consdering my situation. Jack ":-D

Since the computer can connect with the neighbor's router, I don't think there is a problem with wireless connection on the computer. So it has to be some configuration or settings problem with the new modem. I would check the encryption of the new modem. If the computer can see the modem, but not connect, my thinking is that the encryption is blocking the connection. Temporarily disable the encryption on the new modem and see if that makes a difference. If it doesn't, you may want to check the advanced settings on the modem and compare the IP settings on the computers that work versus the one that doesn't.

HT1414 While on the safari app my page cuts out and says you are not connected to Internet but I am clearly connected

While on safari app it cuts out saying cannot display page not connected to Internet but I clearly am

i just had this problem i found my iphone completely flat this mornin and it said to charge i plugged it in my comp and it said to connect to itunes i did and it started loading the software on now works fine

My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

I updated my IPAD 2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

I updated my IPAD2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Brand New C309g will not connect wirelessly with ANY wireless security options enabled

Printer will connect via wired ethernet. I can use the http utility.
Printer will connect via unsecured wireless connection.
Printer defaults to autoconfig (169.xxx)when connected via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
Printer is in the same uncluttered room as the router.
ALL OTHER wireless network devices work fine and keep up with security changes.
I have legacy devices on the network that make me want to run with WEP.
I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
Router is D-Link DIR-655.
I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
-mooi
This question was solved.
View Solution.

Ooops, my mistake. Thanks for pointing it out.
Another idea is to make sure the firmware is updated on the router.
Also, from the control panel of the printer: Setup > Network > Wireless Network Test. It will self-test the printer radio.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Funny bugs with Time Machine connecting to MacBook when reboot

Found a bug for Time Machine.
Reboot with TM disk connect to the MacBook. Most of the time, there will be no show of TM Disk on the desktop and connect thumb drives will not detect too. And do a normal shutdown, I can still feel the warm air venting out from the MacBook.
Have to remove the battery for a few seconds, replace it back and power up. Then everything will back to normal. If reboot with thumb drive connect, such symptoms will not appear.

dilagan wrote:
i attempted to backup the imac with time machine to an external hard drive, it began backing up, stopped and I got the same error message: "time machine error unable to complete backup an error occurred while copying files." Little help!
Yes, that message is not some of Apple's best work.
Most likely, there's a damaged/corrupted file that Time Machine is choking on. See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If you're getting a different message from the Pro, see #C2.

Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"

Hi All,
I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.

Hi Linc,
Thanks for you prompt reply, below are the logs....
9/15/14 7:56:58.229 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:28.287 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:58.315 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:58:28.379 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:58.428 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:59:28.496 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:58.568 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
9/15/14 8:00:28.567 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:58.623 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:01:28.668 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
9/15/14 8:01:53.752 AM ocspd[84]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
9/15/14 8:01:58.666 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:02:28.669 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:58.697 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:03:28.699 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:58.726 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:04:28.782 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)

Issues with SmartPhones not connecting to Cisco LWAP infrastructure

Has anyone observed any issues in getting wifi-enabled smartphones to connect to the Cisco LWAP wireless infrastructure?
In this particular case, the system is operating essentially as a hot-spot (i.e.: No layer 2 security between the LWAP and the smartphone.)
One of the SmartPhone models having problems is the Samsung i730.
I found an FAQ at the Verizon site (attached):
Exerpt from:
http://support.vzw.com/devices/samsung_sch-i730/faq.html#item66 <http://support.vzw.com/devices/samsung_sch-i730/faq.html#item66>
"Why doesn't the i730 connect to my wireless access point (AP) /router?
The i730 supports wireless access points that transmit a 128bit preamble not 130bit preamble. Some wireless access points send a 130bit (i.e. Cisco, Linksys, etc). To address this issue you can upgrade the firmware in your wireless access point by simply going to the wireless access point manufacturer's website and downloading the latest firmware and upgrade instructions."
Full article:
http://support.vzw.com/devices/samsung_sch-i730/faq.html <http://support.vzw.com/devices/samsung_sch-i730/faq.html>
I am wondering what version of LWAP firmware would address the 128-bit issue.
Any thoughts?
Thanks,
John

Try out the latest firmware for the controllers 4.0.206.0. This might solve the issue.

Is there ANY way to track an IPod that is offline, out of battery, and/or not connected to the internet?

On the week of October 21 2014, I lost my IPod. I searched in all the places I remembered it to be last, but despite my best efforts, I still have not found it. I even used the "Find My IPhone" app, but it yielded no results so far. If you know anyone who has the means to locate an IPod that is offline, out of battery or not connected to the internet, please as soon as you can!

No, to show up in iCloud it must have Find My turned on in Settings > iCloud and be powered up and be connected to the internet.
There is no other way an iOS device can be located.

Bug typedef does not connect to expression node

Attached is a simple vi that tries to connect a typedef (in this case a double) to an expression node.
Since LV8 this is not allowed anymore.
We choose LabVIEW because it was possible to use it as a strict typed language. (one of the reasons).
We see that the developers go a long way to make the language so easy that it is too strict to allow typedefinitions to an expression node.
But it can also be a slip of the compiler of course.
attached are the example vi and the typedef.
please supply a patch because this makes it impossible for us to switch to LV8
greetings from the Netherlands
Albert Geven
greetings from the Netherlands
Attachments:
typedef does not connect to expression node.vi ‏7 KB
dbl typedef.ctl ‏5 KB

A workaround is easy but should not be necessary because the typedef is used to keep it a typedef.
Simply use an explicit type conversion in this case to [DBL], at least that was my guess....
but an explicit conversion already knows there is nothing to do so it does not help.
A typecast helps but sure that is not what I want, see picture below.
greetings from the Netherlands
Attachments:
typedef bug not solved by explicit conversion.JPG ‏5 KB

Airport card with G4 - not connecting

I have an Airport Extreme base station connected to my home Windows computer. It appears to be set up fine and broadcasting fine. I get a good signal on my laptop MacBookPRo. I just installed a Airport Card in my older G4 733MHZ PowerPC. I believe it is installed right. The system profiler recognizes it. The base station is upstairs at my house, the G4 downstairs. I am not getting a signal to the G4. The laptop is getting a signal sitting right next to it. Distance is only about 20yards between base station and computer although it is downstairs. Seems to be something wrong with Card or the cards ability to read a signal compared to the built in card in the MACBOOK PRO. I have moved the base station as close as I can. Not sure why one would get the signal and not the other. Any ideas.

Your Power Mac G4 733 MHz requires the original 802.11b AirPort card. This card's maximum wireless speed is theoretically 11 Mbps.
There are two reasons why the card may not be receiving a signal:
(1) The network is configured to operate at 5 GHz or 802.11n only. You would need to ensure that your AirPort Extreme base station (AEBS) is configured to operate in an 802.11b compatible mode for the Power Mac G4 733 MHz to be able to see and connect to the wireless network.
(2) The antenna wire inside the Power Mac G4 733 MHz is not connected to the AirPort card. You would need to find and attach this wire to the card.

Audio out of sync with presentation (not using full motion)

When I preview or publish a project using Captivate 5, the audio is out of sync with the presentation. I am not using any full motion recording, which I know has caused audio/video sync issues in previous versions of Captivate. The audio is slide specific, with a separate audio file for each slide. (In other words, I'm not trying to break a large audio file over many slides.) When each slide is viewed individually -- in the workstation, in the preview window, or in the published version -- the audio is synced just fine. The problem arises only when I try to watch the entire presentation (approx. 10 minutes in length). The audio gradually lags behind the visual. By about half way through the project, the visual presentation is noticably ahead of the audio. By the end, the audio is nearly 4 seconds behind the video. I cannot detect a noticeable change in pitch or speed of the audio, so if the audio is being altered in any way, the alteration is slight.
However, if I use the playback controls to advance to a single slide, the audio is fine for that slide and those immediately after, although it does gradually get off again as the project progresses. (So, for example, if I start the playback in the middle of the project, the audio will only be off by about 2 seconds by the end, rather than 4.)
I have tried various publishing options (although I don't think publishing is the problem, since this happens when I preview the project as well). I have used 2 different computers and also tried viewing the published version locally and streaming. None of these alterations seem to make a difference. By the end of the presentation, regardless of how the project is published or viewed, the audio is several seconds behind the video.
My specs:
Captivate 5
Microsoft XP OS
2 GB RAM
Publishing to .swf
Suggestions?

Hi Mukul,
Thank you very much for your careful responses. Here are the answers to the questions.
First of all, the "slow video" behavior does appear only after adding the slides mentioned in previous post.
1.    I created a “software simulation” project. It IS a capture+audio recording.
2.    Since I recorded the audio while doing screen capture, almost every slide has audio, which is not convenient to edit at all. Is there any other better way that I missed so that we can keep the audio and video at the same step while editing them? As I know so far, either insert silence or delete a little audio to one slide, the audio becomes short, but the slide duration time is still the same as before unless we change that manually which normally is not precise enough to match the audio.
3.    I tried to add the blank slides at where there is a pause of speaking and where they are close to the problem slides. Otherwise, the speaking would sound weird.
4.    Published SWF file size is 20.6 MB.
5.    I do have two externalized video files for title and end.
6.    Unfortunately, it is still slow even if it played on a different system.
And another problem comes up these days. After publication, the screen resolution is not good (like some grey ink left on screen) wherever click or type something. It did not happen before even if worked on the same computer.
I am very sorry that there are so many problems. I have been working on this for long time. The project totally drove me nuts. Hopefully you have more ideas about that.
I really appreciate your help.
Sincerely,
Linda

IPod Touch 4 with iOS5 not connecting to Yahoo Mail

After downloading iOS5 on my iPod Touch 4 I could not connect to my Yahoo Mail.
Read many suggestions and called Apple tech support. The tech tried to access Yahoo Mail and he had the same problem I did.
BUT... I fixed it on my own by process of elmination.
Go to...
Settings
Safari
Turn off Private Browsing ( this might be all you need to do)
then...
Scroll down to Advanced
Turn on Debug Console ( I'm not sure this step is necessary)
Change your Yahoo email password on your Mac or PC
Restart your iPod Touch
Try logging into yahoo mail from yahoo.com using your new password.
I think turning private browsing was the problem and I think it was added in iOS5.
I hope this saves all of you some aggravation. I spent 2 days trying to fix.

Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
iOS: Device not recognized in iTunes for Mac OS X
Try on another computer

I have HP LaserJet Pro M1536dnf Multifunction Printer and my problem with eprint "Not Connected"

i use eprint but after day show in site massage state Not Connected
to solve this problem turn off printer or hp web services and tern on and it work
but same problem after some hour show not connected
how can printer connected all time ?

Hey sfareg,
One thing you need to check is if your internet connection is intermittent. If it is not, you can follow these steps to give the printer a better connection.
1. Find your printer's IP address by printing a network configuration page.
2. Type you IP address into the address bar of your web browser.
3. Click on the network tab at the top of the page.
4. Look at the left hand side and click IPv4 under wireless.
5. Change the IP settings to Manual.
6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
7. Set the Preferred DNS to 8.8.8.8.
8. Set the Alternate DNS to 8.8.4.4.
9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
The printer should have a better connection now.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Pointing out a bug with Z10 not connecting wirelessly to BBLink

Similar Messages

Maybe you are looking for