Difference in core application of "SPARC 32-bit" vs "generic" WebLogic10.3?

Hi guys,
I really need your urgent advice on the topic above. My question is that is there a difference in the WEBLOGIC 10.3 CORE itself between these two version mentioned? My opinion think the only determining factor is the VM used that would determine if it would be a 32-bit WAS and 64-bit WAS.
From my understanding both are same with some minor differences as follows :-
1) The SPARC 32-bit version is bundled with JDK1.6.0_05 but the "generic" version requires you to specify the JAVA_HOME
2) The SPARC 32-bit version is a .bin installer which is a UI installation for SPARC environments but the "generic" version is a .jar file which is a general archive-based installation (not UI based) which can work on all platforms
3) The SPARC 32-bit version has the BEA_HOME path already set based on the installation but the "generic" version require the user to set it manually
Currently, I am using the SPARC 32-bit version but pointing to a 64-bit JDK and executing it with the -d64 parameter. So far there were no problems except that the I ran to PermGen - OOM issues since the MAX_PERM_SIZE was set to 128M. After increasing this to 256M, there are issues so far.
With this could I confirm that it's safe to use a "SPARC 32-bit" version which is configured to use a 64-bit JDK, -d64 parameter, and increased MAX_PERM_SIZE asa opposed to the "generic" version?
Thank you very much my friends.
Edited by: user11188434 on Jul 2, 2009 8:13 PM
Edited by: user11188434 on Jul 2, 2009 8:21 PM

How do the keys compare? If the hashcodes come from the object, does the calculated hash differ between environments?
Why code the app so that it cares about the order of the hashtable? If you care about order, then a hashtable is the wrong thing to be using.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Similar Messages

Compatible HP laser jet printer for EBS 12.0.6 on Solaris 10 SPARC 64 bit

Hi,
We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.
Thanks,
Sharad

We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.You already have the same type of printer configured and it is working properly, so I would say it is supported.
What is the difference between the two printers configuration?
Can you print from the OS to the new printer?
What do you mean by "not available now"?
Thanks,
Hussein

CF9 w/ Solaris 10 (Sparc, 64-bit): Problems with mod_jrun22.so

Hi
We're running a Solaris (Sparc) box and installed Apache 2.2.16 and ColdFusion9 on our system. When starting ColdFusion the first time, the shell script "apache_connector.sh" installs the mod_jrun22.so (must be the successor of mod_coldfusion.so) and adds the required section in the httpd.conf file just fine. (well, after fixing the script... ^^)
The problem arises when starting Apache next time:
httpd: Syntax error on line 414 of /usr/local/httpd-2.2.16/conf/httpd.conf:
Cannot load /opt/coldfusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server:
ld.so.1: httpd: fatal: libgcc_s.so.1: open failed: No such file or directory
Apparently, this module was compiled with gcc, which we didn't install on our Sun system.
Does anyone know whether there's a module available which doesn't depend on gcc libraries under Solaris?
So far we've compiled everything with Suns compiler Sun Studio 12.0. The reason behind this is that we're using CFX-tags and our shared library uses C/C++ and embedded SQL for Oracle 11g (yes, we're old school ^^). And since Oracle 11g officially only supports Sun Studio 12.0 when using embedded SQL, we're trying to compile everything with this compiler.
Sure we could install gcc (or at least a runtime-component containing libgcc_s.so.1), but I'm wondering now whether we'll run into problems later when using our C++ library which was compiled with Sun Studio 12.0.
Could anyone shed some light on this?
Thanks!
Daniel

We have our EBS 12.0.6 on Sun Solaris SPARC 64 bit. There are few hp printer (hp laserjet p2015dn) configured with our application and they are working fine.
Now we have to add one more printer but ( hp laserjet p2015dn) is not available now.
So please suggest the hp laserjet printer available for Solaris 10 Sparc 64 bit.You already have the same type of printer configured and it is working properly, so I would say it is supported.
What is the difference between the two printers configuration?
Can you print from the OS to the new printer?
What do you mean by "not available now"?
Thanks,
Hussein

Migrate from 11.5.9 to 11.5.10.2 on Sun Solaris Sparc(64-bit) Platform.

hi,
Plz tell me the mandatory steps to perform the migration and also tell me from where to get the media pack and what is the total size of that media pack,
i m looking forward for ur support,
thanks

thanx for ur reply,
i already logged an SR and they provide the following details of media pack :
E B24290-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC 64-bit) Rapid Install RDBMS - Disk 1
E B24291-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC 64-bit) Rapid Install Databases - Disk 1
E B24292-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC 64-bit) Rapid Install Databases - Disk 2
E B24293-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC 64-bit) Rapid Install Databases - Disk 3
E B24298-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC) Rapid Install Tools - Disk 1
E B24299-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operating System
(SPARC) Rapid Install APPL_TOP - Disk 1
E B24300-01 Oracle Applications 11i Release 11.5.10.2 for Solaris Operati
ng System
(SPARC) Rapid Install APPL_TOP - Disk 2
is this all we need to download , iwant to know the total size of all this .
waiting for ur reply

E450 SPARC 64-bit

Hi All,
This maybe a stupid question but i still would like to know the answer.
We have a E450 with dual SPARC 302mhz CPUs, can this server run 64-bit software? We are trying to upgrade to Oracle 10g but it only supports 64-bit.
Thanks for any input.

Yes. 64-bit.
The UltraSPARC-II cpu modules are native 64-bit architecture.
Solaris 7 and newer would install a 64-bit kernel on that platform by default.
Solaris 8 and newer do not have 32-bit-only kernels,
but have a 32-bit compatibility innate to them, that they can run
well behaved 32-bit applications in their 64-bit environments.
Match your version of your database software to the
appropriate version of Solaris.
E450 in the Sun System Handbook:
http://sunsolve.sun.com/handbook_pub/Systems/E450/E450.html
Edit:
You can find many items of information on this topic
with a quick Google search, keyword ultrasparc-ii.
For example, there's this Sun press release from November 1998:
http://www.sun.com/smi/Press/sunflash/1998-11/sunflash.981102.2.xml

Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
Thank you.

Here's how I resolved my issue:
1. On the DM's Applications page, click the "Import files" button.
2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
3. Select the alx files shown.in the files window..
4. Click the "Open" button of the dialog box.
5. Wait for DM to finish processing the selected files.
Voila! Now I see all the apps.
Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

Error while creating new employee in CAF Core application

Hi
I am novice to the CAF, this is my first CAF Core application which I have created and deployed in J2EE engine successfully. Its ready for Testing, here I am trying to create a new employee but while saving it, giving error like:-
ERROR. Exception thrown in method createEmployee. The transaction is marked for rollback.: Exception thrown in method create. The transaction is marked for rollback.: com/sap/caf/rt/exception/CAFIllegalAccessException
Anyone can help out me.
Regards
Srikanth

Hi Cindy Herrman,
FYI , that check box already unchecked, while setup the employee entity only that Permission check box unchecked, still I am getting same problem.
-Srikanth

Oracle 10g installation in an SPARC 64 bit Solaris 10 server

Good morning,
I'm trying to install Oracle 10g Enterprise Edition in a server with Solaris 10 as operating system. When I run the oui, the prerequisites part is passed but the installation gives me an error telling that the installer can't write in the /tmp directory. Nevertheless, I have writing grants and space enough in that directory, in fact the installer writes the installAction.log in this directory. So I don't understand which can be the problem?
Any suggestions?
Thanks in advance.
Regards,
Mabel

It could be you don't have enough free space on the tmp dir.
Check this point from the
Oracle® Database Installation Guide. 10g Release 2 (10.2) for Solaris Operating System (SPARC 64-Bit). Part Number B15690-02
If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:
1. Use the df -k command to identify a suitable file system with sufficient free space.
2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:
$ su - root
# mkdir /mount_point/tmp
# chmod a+wr /mount_point/tmp
# exit
3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:
Bourne, Bash, or Korn shell:
$ TMP=/mount_point/tmp
$ TMPDIR=/mount_point/tmp
$ export TMP TMPDIR
C shell:
% setenv TMP /mount_point/tmp
% setenv TMPDIR /mount_point/tmp
~ Madrid.

Essbase Client 32 bit on the Solaris SPARC 64 bit Cognos server - Need help

Hello All,
I have a SunSolaris SPARC 64 bit OS on which i have the 32 bit Cognos 8.4.1 installed.
I now wanted to install a 32 bit Essbase client on this server.
can anyone please let me know if there exists a 32 bit essbae client which can be installed on the SunSolaris SPARC 64 bit OS ?
Thanks you in advance.
MS

I will asume the latest version of the essbase client
"EPM System Installer installs both 32-bit and 64-bit Essbase Client on a machine with a 64-bit operating system."
Once it is installed you may need to update the environment variables to point to the 32bit client.
Cheers
John
http://john-goodwin.blogspot.com/

Difference between core switch types WS-C3750X-12S-S and N3K-C3524P-10G?

Hello All,
I am new to this domain and yet have to look after the setup of our datacenter for a new branch. Could any one of you provide difference between core switch types WS-C3750X-12S-S and N3K-C3524P-10G!
Thanks in advance!!

N3K-C3524P-10G
24 fixed 1/10-Gbps SFP+ ports; upgradeable to 48 with a valid license
Line-rate Layer 2 and Layer 3 throughput of up to 480 Gbps
Compact 1RU form factor
Dual redundant color-coded power supplies
Four redundant color-coded fans

Messages in the OS logs of Oracle Solaris on SPARC (64-bit)

One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
However, there is nothing mention in the Note # 833665.1 about the following one message.
Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
Can anyone please tell me
1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
2. Does this message get stops on applying of patch # 8477122 ?
Thank you,
Bhavin

There are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.

When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

Hi
Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
Regards
Mads

Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

EPM 11.1.1.3 Planning Application Available on 64 BIT Red Hat 5?

Hi
We want to install Hyperion EPM 11.1.1.3 Planning on RedHat 5-64 Bit and Window 2003 Server 32. I downloaded Planning/Essbase/Foundation Service/FR/WA from Oracle Edelivery for Linux 64 Bit platform. Weblogic 9.2 MP 3 were downloaded as well for Linux 64 Bit.
I have another Windows 2003 server 32 bit, we want to install EPM Architect, FDM, FR Printer Service.
On Linux 64 bit Server, we are going to install Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application
When I run installer to check the compoment, I found there are no 64 Bit Component except for Essbase and Administration Server has 32 bit or 64 Bit option.
1. Can anyone tell me if it is a true that only Essbase and EAS support 64 bit, Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application only support 32 bit component.
2. If I install Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application on Linux 64 Bit, Does that have any compatible problem?
We installed Hyperion 11.1.13 Planning 32 Bit one windows 2003 64 Bit Server, it has some problems with EPMA and Planning. I can't launch classic planning applcaiton from Workspace. From 8300 port, we can use classic way to access planning application. Someone said it is startup sequence problem, but I follow up Install ation and Configuraton, It doesn't have any help. From Event viewer, It said it is because 32 bit Oracle not compatible with 64 bit system. How can I fix this problem?
Regards
David Wang

Hi,
Yes according to documentation it supports.
But be very careful with the version of OS and softwares. Oracle will not support if the versions are not supported.
And keep in mind that if you are installing a 32 bit application on a 64 bit OS there are bound to be so many configurations which dont appear to be that clear in the documentation provided. We had to deal with some major issues related to java configurations.
I would recommend you to use an easier option of going with windows.
Hope this helps.
RG

10.2.0.3 on solaris 9(Sparc 64 bit), patch 5257399 needed or not?

We are going to install oracle 10.2.0.3 on a Solaris 9 (Sparc 64 bit) box. According to Note 406472.1, Mandatory Patch 5752399 is needed for 10.2.0.3 on Solaris 64-bit and Filesystems Managed By Veritas or Solstice Disk Suite software. Our system is not on SAN, only local disks, so I'm sure we don't use veritas file system. But I'm not sure if we still use Solstice Disk Suite software. Sun said that in Solaris 9, Solstice Disk Suite is renamed to Solaris volume manager and it is bundled in Solaris 9. Does this mean Solaris 9 is using Solstice Disk Suite by default and we have to apply patch 5752399?
How can I verify which file manager we are using? (Our sys adm is not quite sure).
If we apply the patch no matter we really need it or not, what impact to the system?
Please advise. Thanks!

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

In 10.8, the file info window's "Kind:" read "Application"/etc. for 64-bit items and "Application (32-bit)"/etc. for 32-bit items. The "(32-bit)" part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
3. Wait a minute or so for the report to finish.
4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit.

Difference in core application of "SPARC 32-bit" vs "generic" WebLogic10.3?

Similar Messages

Maybe you are looking for