Inserting old swf into new fla with different frame rate

Hi, I'm trying to insert an old banner ad into a new Flash site. The problem is, the banner I made at 20 frames per second, and the Flash site is set to 41, so it literally plays the banner twice as fast. Any ideas as to what I can do about this? Thank you.

A few of them I may have the original source files on disk. Do you know what's the easiest way to transpose them to the higher frame rate?
For the ones I don't have, I should open the swf file in the new site and add a frame between each already existing frame?
Yes I imported the swf, I'm kind of just finding my way around Flash and I don't know how to load them dynamically. If I did load them dynamically, would they play at their original frame rate?

Similar Messages

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

Understanding compositions with different frame rate

Hey everyone,
I am working with AVCHD footage with a frame rate of 25.
If it drop my footage into a new compostion after affects sets everything
up automatically.
I'd now like to what happens to my avchd clip if I change the frame rate
of my compostion from 25 to 24. What excatly happens to the frame
missing? Does AE just gets rid of it?
Does it make a difference if I just change my comp settings from 25 to 24
or if I drop my 25 comp into a new one with 24.
Thinking of it the other way around, if I change my frame rate from 25 to 50,
does that mean that AE doubles the frames of my files?
In general, does the changes have any impact on the speed of my footage?
I'm looking forward to your reply. Much appreciated.
Best,
Alex
PS: this count for Premier Pro aswell?

When you create a layer in a composition, and that layer is based on a video footage item, the composition checks at each composition frame to see (sample) the data from the footage item. If there isn't a single frame of data from the footage item that exactly lines up with the frame in the composition, then the composition samples from the footage frames on either side and does one of several things: It can either just pick one of the two frames, or it can just mix them together, or it can do something much smarter and try to reconstruct the image that would have existed between the two frames.What it does depends on what frame blending setting you're using.
When you're using a footage item that has a higher frame rate than your composition, and both frame rates are relatively high, you don't need to worry about this at all, as the default settings tend to work just fine.
To sum up, changing the frame rate of the composition just changes how often the composition samples the image data from the footage item. It does nothing to the footage item itslef and doesn't affect how fast the video from that footage item plays in a layer.
To interpret a footage item as being at another frame rate, or to conform a footage item to a frame rate, you have to use the Interpret Footage dialog box.
For more information, see "Frame rate".

Mail inserts old messages into new ones

So I have been getting emails from people, everything from the sender to the subject line is right but then instead of getting that message, an old message from that inbox is put in its place and its very confusing. Then my phone decides that all the 2000 messages in that inbox on the server are new messages and tries to download them all at once to my phone.
Anyone have any ideas of how to stop this? I have a feeling its something to do with my email provider.

You can only restore Messages when restoring from a complete backup that contains those messages.
If you have a backup in iTunes on the computer or in iCloud, you can follow the restore section of this article: http://support.apple.com/kb/ht1766
About iTunes Backups: http://support.apple.com/kb/ht4946
About iCloud Backups: http://support.apple.com/kb/PH12519

Different frame rate in movie mode? iPhone 4

I noticed that my iPhone shoots video clips with different frame rate from time to time. I suppose it slows frame rate on dark shots. For now all of my daylight shots are 30 fps, while night or dark ones are 25 and 24. This makes it hard to edit clips in iMovie for example, because difference in frame rate causes strobe motion effect on output.
!http://pics.livejournal.com/brain_away/pic/000040rc!
!http://pics.livejournal.com/brain_away/pic/00003s3c!
Anybody have the same?
For reliable results I would suggest to shoot two clips: one in sunny daylight conditions, another with ordinary room lightning, maybe a little darker than normal.
Please let me know of the results. Thanks

Doesn't seem to be just a Quicktime bug:
!http://pics.livejournal.com/brain_away/pic/00005gw1!
+Created on: 12.09.2010 22:42:50 Московское летнее время
Report for file: IMG_0206.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................10s 193ms
Total File Size...................................12.9 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................24.697 fps
Total Frames......................................251
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.465
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................10s 163ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................12.8 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 04:13:59
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................10s 193ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................79.4 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 04:13:59+
+Created on: 12.09.2010 22:43:06 Московское летнее время
Report for file: IMG_0194.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................AAC LC-PS
File Format.......................................MPEG-4
Play Time.........................................16s 579ms
Total File Size...................................21.0 MiB
Total Stream BitRate..............................10.6 Mbps
Encoded with......................................4.1
Encoding Library..................................Apple QuickTime
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 280 pixels
Frame Height......................................720 pixels
Frame Rate........................................29.970 fps
Total Frames......................................496
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.383
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................16s 550ms
Video Stream BitRate..............................10.6 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................20.9 MiB (99%)
Video Stream Title................................Core Media Video
Date of Original Encoding.........................UTC 2010-09-12 02:45:06
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio Stream #1
Codec.............................................AAC
Codec (FourCC)....................................40
Audio Stream Length...............................16s 579ms
Audio Stream BitRate..............................64.0 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Audio Channel's Positions.........................Front: L R
Sampling Rate.....................................44.1 KHz
Audio Stream Size.................................129 KiB (1%)
Audio Stream Title................................Core Media Audio
Date of Original Encoding.........................UTC 2010-09-12 02:45:06+

Why does my Apple Mail insert old messages into the body of new emails?

Why does my Apple Mail insert old messages into the body of new emails? The correct sender's name will appear in the "From" column, but an old message from a different sender in the body. This happens randomly. I have an iMac OSX 10.6.8. I recently had the hard drive cleaned, but Apple Mail seemed to be running fine when I set it up again. Could this be a virus? What should I do about it? Thanks for any insights!

Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response!

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

Inserting A SWF into a Captive Project

Hi All,
I'm trying to insert a swf into my captivate project. It goes
onto the slide with no problem but when I preview the project the
swf is not animated. I'm using AS3 to code the animation so there
is only one frame. I set the frame rate in Captivate to match the
frame rate of the swf with no success. Any help is appreciated,
thanks.

Hi there
I suppose that's possible. I'm not a Flash Coder yet but
would imagine the sky is the limit once you get things into Flash,
as at that point it's a Flash project, no? I don't believe an
avenue exists to take a Flash project and pop it into Captivate.
(By that, I mean to export from Flash as a .CP file - I am well
aware that one may create a .SWF from Flash and pop it into
Captivate as an Animation)
Cheers... Rick

How do i transfer my music library and playlist from old computer to new computer with windows 7

How do I transfer my music library and playlist from old computer to new computer with windows 7?

Type "move itunes library" into the google search bar.

How can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

how can I transfer contacts from one iPad to a new iPad with different iCloud addresses?

One way would be to e-mail them from yourself to yourself. That would totally avoid the different ID issue.

Error inserting a row into a table with identity column using cfgrid on change

I got an error on trying to insert a row into a table with identity column using cfgrid on change see below
also i would like to use cfstoreproc instead of cfquery but which argument i need to pass and how to use it usually i use stored procedure
update table (xxx,xxx,xxx)
values (uu,uuu,uu)
     My component

    <cffunction name="cfn_MediaType_Update" access="remote">
        <cfargument name="gridaction" type="string" required="yes">
        <cfargument name="gridrow" type="struct" required="yes">
        <cfargument name="gridchanged" type="struct" required="yes">
        
        <cfset var colname="">
        <cfset var value="">
        
        <cfswitch expression="#ARGUMENTS.gridaction#">
            
            <cfcase value="U">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
                <cfquery datasource="#application.dsn#">
                UPDATE SP.MediaType
                SET #colname# = '#value#'
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            
            <cfcase value="D">
                
                <cfquery datasource="#application.dsn#">
                update SP.MediaType
                set Deleted=1
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            <cfcase value="I">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
               <cfquery datasource="#application.dsn#">
                insert into SP.MediaType (#colname#)
                Values ('#value#')
                </cfquery>
            </cfcase>
        </cfswitch>
    </cffunction>
my table
mediatype:
mediatypeid primary key,identity
mediatypename
my code is
<cfform method="post" name="GridExampleForm">
        <cfgrid format="html" name="grid_Tables2" pagesize="3" selectmode="edit" width="800px"
        delete="yes"
        insert="yes"
            bind="cfc:sp3.testing.MediaType.cfn_MediaType_All
                                                            ({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{cfgridsortdirection})"
              onchange="cfc:sp3.testing.MediaType.cfn_MediaType_Update({cfgridaction},
                                            {cfgridrow},
                                            {cfgridchanged})">
            <cfgridcolumn name="MediaTypeID" header="ID" display="no"/>
            <cfgridcolumn name="MediaTypeName" header="Media Type" />
        </cfgrid>
</cfform>
on insert I get the following error message ajax logging error message
http: Error invoking xxxxxxx/MediaType.cfc : Element '' is undefined in a CFML structure referenced as part of an expression.
{"gridaction":"I","gridrow":{"MEDIATYPEID":"","MEDIATYPENAME":"uuuuuu","CFGRIDROWINDEX":4} ,"gridchanged":{}}
Thanks

Is this with the Travel database or another database?
If it's another database then make sure your columns
allow nulls. To check this in the Server Navigator, expand
your DataSource down to the column.
Select the column and view the Is Nullable property
in the Property Sheet
If still no luck, check out a tutorial, like Performing Inserts, ...
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/index.jsp
John

My ipod (nano, 6th generation) won't sync to a new computer with different stuff on it. It *appears* to sync but when it's done it still has the stuff from the other computer on it. What to do?

My ipod (nano, 6th generation) won't sync to a new computer with different stuff on it. Itunes on the new computer doesn't give the usual warning that you are about to lose all your existing stuff and the ipod *appears* to sync but when it's done it still has the stuff from the other computer on it. What to do?

Hey eamonn27
Thank you for using the Apple Support Community. Due to the nature of your issue, you may find more information by using another one of Apple's support resources.
Express Lane
https://expresslane.apple.com/GetproductgroupList.action
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Help with sequence settings in final cut for project with 2 different frame rates.

I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

Inserting old swf into new fla with different frame rate

Similar Messages

Maybe you are looking for