Different Style on Last Paragraph?

I have a style that sets a paragraph rule below each paragraph to act as a divider. I need to apply this in many paces, however I would like the last paragraph in each section to have no rule. Is this possible?
I don't want to have to apply a different style to the last paragraph in each section because the text is regularly updated...

Which is still not an automated solution...it would need to be run after every edit.
Right it wouldn't be completely automatic, but you wouldn't have to run it after every edit—just after the final edit.
It isn't clear if the text is flowing between frames, the OP's #6 makes it sound like it's 1 frame. If it is flowing you can check if a paragraph's last line is the last line of a frame, so it still could be done with flowing text.
So this AppleScript gets every story in the document and checks the story's paragraphs. If the paragraph has a style sheet applied with rule below on and it's the last paragraph, the rule below gets turned off, otherwise the rule gets turned on.
tell application "Adobe InDesign CC 2014"
    tell active document
        --get the document stories
        set s to every story
        repeat with x in s
            --check each paragraph
            set ps to object reference of every paragraph of x
            repeat with i from 1 to count of ps
                set p to item i of ps
                --if it's the last paragraph and the p style has a rule below set it to off, else make sure it is on
                if i is equal to (count of ps) then
                    if rule below of applied paragraph style of p then set rule below of p to false
                else
                    if rule below of applied paragraph style of p then set rule below of p to true
                end if
            end repeat
        end repeat
    end tell
end tell

Similar Messages

  • In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

    In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph. 
    I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature.  I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph.  Is this possible?
    Thanks!

    Nice of you to be doing this for your Mother's Thesis.
    There are several issues here:
    1. A Paragraph Style is what it says, the style for the paragraph
    2. You can format text within a paragraph by applying a Character Style
    3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
    So in answer to your question, no.
    You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
    Peter
    Apple's marketing slogan:
    Pages 5.5.1 - Can't Do That!

  • Different Styles in PlainView - Syntax Highlighting?

    Hi,
    I've managed to extend PlainView and looking at old JEdit code I have the syntax highlighting working for the most part. However, at certain times while typing the cursor starts to get way ahead of the text it's typing. And as I backspace on the line the cursor eventually gets closer to the character the closer it gets to the start of the line.
    I'm overridding the "drawUnselectedText()" method in PlainView to do the coloring.
    Here's the code, you can see the call to SyntaxUtilities.paintSyntaxLine() which is JEdit's class to do the drawing.
             * Renders the given range in the model as normal unselected text. This
             * is implemented to paint colors based upon the token-to-color
             * translations. To reduce the number of calls to the Graphics object,
             * text is batched up until a color change is detected or the entire
             * requested range has been reached.
             * @param g
             *            the graphics context
             * @param x
             *            the starting X coordinate
             * @param y
             *            the starting Y coordinate
             * @param p0
             *            the beginning position in the model
             * @param p1
             *            the ending position in the model
             * @returns the location of the end of the range
             * @exception BadLocationException
             *                if the range is invalid
            protected int drawUnselectedText(Graphics g, int x, int y, int p0, int p1) throws BadLocationException {
                System.out.println("p0: " + p0 + " p1: " + p1 + " x: " + x + " y: " + y);
                // Get the start of the element
                int lineIndex = doc.getDefaultRootElement().getElementIndex(p0);
                // Get the element for the line
                Element elem = doc.getDefaultRootElement().getElement(lineIndex);
                System.out.println("lineIndex: " + lineIndex + " elemStartIDX: " + elem.getStartOffset() + " elemEndIDX: " + elem.getEndOffset());
                // Get the line text
                doc.getText(p0, p1 - p0, currentLineText);
                // If highlighting, mark the tokens
                if (marker != null) {
                    Token t = marker.markTokens(currentLineText, lineIndex);
                    x = SyntaxUtilities.paintSyntaxLine(currentLineText, t, styles, this, g, x, y, p0, p1);
                    System.out.println("Painted line at: " + x);
                } else {
                    // No highlighting requested, draw normal text
                    Font defaultFont = g.getFont();
                    Color defaultColor = styles[0].getColor(); // Default color of text
                    g.setFont(defaultFont);
                    g.setColor(defaultColor);
                    x = Utilities.drawTabbedText(currentLineText, x, y, g, this, p0);
                // Set the last line processed
                lastLine  = lineIndex;
                return x;
    Here is the code from the paintSyntaxLine() method:
         * Paints the specified line onto the graphics context. Note that this
         * method munges the offset and count values of the segment.
         * @param line
         *            The line segment
         * @param tokens
         *            The token list for the line
         * @param styles
         *            The syntax style list
         * @param expander
         *            The tab expander used to determine tab stops. May be null
         * @param gfx
         *            The graphics context
         * @param x
         *            The x co-ordinate
         * @param y
         *            The y co-ordinate
         * @return The x co-ordinate, plus the width of the painted string
        public static int paintSyntaxLine(Segment line, Token tokens, SyntaxStyle[] styles, TabExpander expander, Graphics gfx, int x, int y, int p0, int p1) {
            Font defaultFont = gfx.getFont();
            Color defaultColor = Color.black;
            FontMetrics fm = gfx.getFontMetrics(defaultFont);
            int offset = 0;
            while (tokens != null && tokens.id != Token.END) {
                int length = tokens.length;
                if (tokens.id == Token.NULL) {
                    if (!defaultColor.equals(gfx.getColor()))
                        gfx.setColor(defaultColor);
                    if (!defaultFont.equals(gfx.getFont()))
                        gfx.setFont(defaultFont);
                } else {
                    styles[tokens.id].setGraphicsFlags(gfx, defaultFont);
    //                fm = gfx.getFontMetrics();//[tokens.id].getStyledFont(defaultFont);
    //                FontMetrics dfm = Toolkit.getDefaultToolkit().getFontMetrics(defaultFont);
    //                System.out.println("Font Info: CharWidth[" + fm.charWidth(line.array[p1])+"], Max Advance[" + fm.getMaxAdvance()+"]");
    //                System.out.println("Default Font Info: CharWidth[" + dfm.charWidth(line.array[p1])+"], DMax Advance[" + dfm.getMaxAdvance()+"]");
    ////                x = fm.charsWidth(line.array, p0, length);
                line.count = length;
                x = Utilities.drawTabbedText(line, x, y, gfx, expander, p0);
                line.offset += length;
                offset += length;
                tokens = tokens.next;
            return x;
    I'm not sure what the problem is..i thought it might be an issue with the View and drawing multiple font styles. Since plain view only deals with a single font color and size. I tried using LabelView but that seems to need a StyledDocument and I had problems when I tried to use DefaultStyledDocument for my syntaxdocument. I was getting strange offset issues when using the Segment class.
    Here's what I posted: http://forum.java.sun.com/thread.jspa?threadID=780801
    I am using PlainDocument because that seemed to be what everyone was using for a syntax editor..since the structure of the document in a Plain Document is less complex.
    I orginally started out using the setCharacterAttributes() method on the DefaultStyledDocument and letting the views draw the text. That all seemed to work except for the "segment offset" issue. And I wasn't sure where the best spot to get the document to redraw subsequent lines in the case of changing a multiline comment, etc.
    So, everything I read about others attempts for syntax highlighters seems to use either StyledEditorKit with a fixed language set with custom parsing and using the setCharacterAttributes method. Or they use the plaindocument approach with a custom view..(which no one seems to share the source) or the project just simply uses the JEditTextArea directly (which we can't do in our product).
    We don't need multiple fonts per-line.. The document will always use one font face (Arial, Helvetica, etc) but may use different styles per word (bold, italic, etc).
    I thought I'd need to use FontMetrics to get the size of the font and such. But there didn't seem to be a difference in measurements based on the style of the font. (i.,e A bold font has the same charWidth('m') size as a regular style.
    At least that's what my test program showed..
    The other thing I noticed is that when the document is successfully colored and I use the mouse to select a region of text, the style of the text reverts back to normal. I'm sure that's because I only override the drawUnselectedText() method.
    Any ideas? Is there anyone who has successfully done this?
    Thanks,
    - Tim

    I just tried using a proportional font in my editor, and now I'm seeing your runaway-caret problem. Specifically, the caret remains in sync with the text as long as no bold characters are encountered, but it gets noticeably farther out of whack with each bold character it passes. I suspect that, when you measured the charWidth, your FontMetrics object wasn't really based on a bold font, because bold versions of proportional fonts are larger. And of course, the model/view conversion methods assume that the same style of the same font is used throughout the document. I've never had to deal with that problem, since I've always used monospaced fonts by preference, and bold versions of monospaced fonts really are the same size as the non-bold versions. I suggest you do the same, because getting this to work with proportional fonts look like a major hassle.

  • Problem with footer in table style not applying paragraph style... or just me?

    I'm having a niggling problem making a table style with cell/paragraph styles for the header, body, and footer respectively. I want to make it as simple as possible for other users but one thing keeps tripping me up. I'll try and describe with screenshots. I'm using InDesign CS5 on Windows 7.
    I have a table style set up with cell styles for the header, body, and footer, and paragraph styles for each as well. Say I'm converting a list of generic text to this table:
    i convert it to my table style. The body style is a numbered list:
    I convert the header to an, err, Header. The cell applies the header paragraph style as I should expect:
    I convert the footer likewise, but it maintains the Body text paragraph style as an override!
    So naturally I clear the override and it works fine. But of course, I'd rather it acted like the header row. I can't work out where the override on the footer comes from and why it operates differently in this respect to the header row. There is nothing different about how the styles are constructed. Have I made a mistake somewhere, or is this correct behaviour I'm misinterpreting, or something...?
    edit: Here is the file, if that will help:
    https://www.dropbox.com/s/4kzgui1itaskuvz/strip%20list%20test.indd

    Hi,
    I was able to reproduce the issue you are facing.
    I will be logging a bug for this and it would be investigated.
    Thanks a lot for reporting the problem!!
    Javed

  • Is there any Page function equivalent to Word's brush icon that can paste paragraph style to independent paragraphs multiple times in a Page document?

    In Page Manual, I did find an instruction that allows us to do something similar, but it is so tedious having to go back and forth between dropdown commands.
    I want something simple like Microsoft Word's paint brush icon that simply let me copy the paragraph style (size of font, character style, spacing etc) and then just paste the style to other paragraphs independently - separated by subtitles with different font size and styles that I want to keep.
    I am using iMac with the latest Mountain Lion and Page 09 now.

    Once you have a style set up it is only a single action to apply it to any text.
    Personally, I never got "the hang" of using that paint brush in Word. Give me copy & paste style any day, which is what I used in AppleWorks. With styles in Pages it's even easier.

  • How can I add more than one same spry menu (eg. collapsible menu)  with in different styles (font size, color, background, etc) on current page?

    How can I add more than one same spry menu (eg. collapsible menu)  with in different styles (font size, color, background, etc) on current page?

    Hi Nancy,
    This screenshot was only for imagination. A part of the code (not all) is below.  In the code there are some background images but they are not seem in live mode.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title></title>
    <link href="css/my_site.css" rel="stylesheet" type="text/css" />
    <link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css"/>
    <link href="SpryAssets/SpryCollapsiblePanel.css" rel="stylesheet" type="text/css" />
    <script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
    <script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
    <style>
    #CollapsiblePanel1 .CollapsiblePanelOpen .CollapsiblePanelTab {
        background-color: #003366;
        font-size: 18px;
        line-height: 52px;
        color: #FFF;
    #CollapsiblePanel1 .CollapsiblePanelTabHover .CollapsiblePanelTab {
        background-color: #003366;
        color: #FFF;
        text-shadow: 1px 1px #000;
        font-weight: bold;
        line-height: 52px;
    #CollapsiblePanel1 .CollapsiblePanelClosed .CollapsiblePanelTab  {
        background-color: #C3CFDF;
        border-radius: 5px 5px 0px 0px;
        color: #999
        text-shadow: 1px 1px #000;
        font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
        font-size: 18px;
        font-weight: bold;
        line-height: 52px;
    #CollapsiblePanel2 .CollapsiblePanelOpen .CollapsiblePanelTab {
        background-image: url(images/international.jpg);
        background-repeat: no-repeat;
        font-size: 18px;
        line-height: 52px;
        color: #FFF;
    #CollapsiblePanel2 .CollapsiblePanelTabHover .CollapsiblePanelTab {
        background-color: #003366;
        color: #FFF;
        text-shadow: 1px 1px #000;
        font-weight: bold;
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel2 .CollapsiblePanelClosed .CollapsiblePanelTab  {
        background-color: #C3CFDF;
        border-radius: 5px 5px 0px 0px;
        color: #999
        text-shadow: 1px 1px #000;
        font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
        font-size: 18px;
        font-weight: bold;
        background-image: url(images/TR_Gray2-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel2 .CollapsiblePanelContent {
        background-color: blue;
    #CollapsiblePanel3 .CollapsiblePanelOpen .CollapsiblePanelTab {
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        font-size: 18px;
        line-height: 52px;
        color: #FFF;
    #CollapsiblePanel3 .CollapsiblePanelTabHover .CollapsiblePanelTab {
        background-color: #003366;
        color: #FFF;
        text-shadow: 1px 1px #000;
        font-weight: bold;
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel3 .CollapsiblePanelClosed .CollapsiblePanelTab  {
        background-color: #C3CFDF;
        border-radius: 5px 5px 0px 0px;
        color: #999
        text-shadow: 1px 1px #000;
        font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
        font-size: 18px;
        font-weight: bold;
        background-image: url(images/TR_Gray2-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel4 .CollapsiblePanelOpen .CollapsiblePanelTab {
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        font-size: 18px;
        line-height: 52px;
        color: #FFF;
    #CollapsiblePanel4 .CollapsiblePanelTabHover .CollapsiblePanelTab {
        background-color: #003366;
        color: #FFF;
        text-shadow: 1px 1px #000;
        font-weight: bold;
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel4 .CollapsiblePanelClosed .CollapsiblePanelTab  {
        background-color: #C3CFDF;
        border-radius: 5px 5px 0px 0px;
        color: #999
        text-shadow: 1px 1px #000;
        font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
        font-size: 18px;
        font-weight: bold;
        background-image: url(images/TR_Gray2-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel5 .CollapsiblePanelOpen .CollapsiblePanelTab {
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        font-size: 18px;
        line-height: 52px;
        color: #FFF;
    #CollapsiblePanel5 .CollapsiblePanelTabHover .CollapsiblePanelTab {
        background-color: #003366;
        color: #FFF;
        text-shadow: 1px 1px #000;
        font-weight: bold;
        background-image: url(images/TR_Col-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    #CollapsiblePanel5 .CollapsiblePanelClosed .CollapsiblePanelTab  {
        background-color: #C3CFDF;
        border-radius: 5px 5px 0px 0px;
        color: #999
        text-shadow: 1px 1px #000;
        font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
        font-size: 18px;
        font-weight: bold;
        background-image: url(images/TR_Gray2-WEB.png);
        background-repeat: no-repeat;
        line-height: 52px;
    </style>

  • In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

    In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
    1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
    2. Type value in New Position box.
    3. Click Continue. The Edit Tab Stop box closes.
    4. Open Paragraph Designer. No tabs are recorded.
    Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
    Thanks.

    Hi, Arnis,
    Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
    -Trish

  • How to apply different styles to multiple spry accordian panels?

    Hi all,
    I have a website that I'm building that has multiple spry accordian features on it.
    I am trying to apply different styles to each accordian. A problem arises when I try to place an accordian within another accordian.
    I have styled two different background images for two of the accordians for the styles (AccordionPanelTab, AccordionPanelTabHover and AccordionPanelOpen AccordionPanelTabHover) which work fine.
    When I try and place an accordian within another accordian the background image for this accordian for the styles (AccordionPanelTab and AccordionPanelOpen AccordionPanelTabHover) has the different style applyed that I stated in the accordion.css file, however the style (AccordionPanelTabHover) has the same style as the accordian it is within even though in the accordion.css file I stated a different background image.
    I hope all this makes sence below is my source and CSS Code.
    I appriciate any help that can be given to help resolve this issue I am running in too.
    Source Code
    <div id="content">
    <p><span class="first_header_word_packages">Welcome</span> <span class="header_word_packages">to our packages page</span></p>
    <p class="content_txt">Here you can build the website package that matches your business needs as well as being able to work out the cost of your site without having to worry about scary hidden costs at a later date.</p>
    <p class="content_txt"> We have two packages available for our customers;</p>
    <div id="Accordion1" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab"></div>
        <div class="AccordionPanelContent">
       <p>Text Goes Here</p>
        <div id="Accordion2" class="Accordion" tabindex="0">
          <div class="AccordionPanel">
        <div class="AccordionPanelTab"></div>
        <div class="AccordionPanelContent">
        <p>Text Goes Here</p>
        </div><!-- end #Accordion2 Content -->
      </div><!-- end #AccordionPanel -->
    </div><!-- end #Accordion2 -->
        </div><!-- end #Accordion1 Content -->
      </div><!-- end #AccordionPanel -->
    </div><!-- end #Accordion1 -->
    <div id="Accordion3" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab"></div>
        <div class="AccordionPanelContent">
             <p>Text Goes Here</p>
          <div id="Accordion4" class="Accordion" tabindex="0">
            <div class="AccordionPanel">
        <div class="AccordionPanelTab"></div>
        <div class="AccordionPanelContent">
         <p>Text Goes Here</p>
        </div><!-- end #Accordion4 Content -->
      </div><!-- end #AccordionPanel -->
    </div><!-- end #Accordion4 -->
        </div><!-- end #Accordion3 Content -->
      </div><!-- end #AccordionPanel -->
    </div><!-- end #Accordion3 -->
    </div><!-- end #content -->
    CSS
    @charset "UTF-8";
    /* SpryAccordion.css - version 0.5 - Spry Pre-Release 1.6.1 */
    /* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
    /* This is the selector for the main Accordion container. For our default style,
    * we draw borders on the left, right, and bottom. The top border of the Accordion
    * will be rendered by the first AccordionPanelTab which never moves.
    * If you want to constrain the width of the Accordion widget, set a width on
    * the Accordion container. By default, our accordion expands horizontally to fill
    * up available space.
    * The name of the class ("Accordion") used in this selector is not necessary
    * to make the widget function. You can use any class name you want to style the
    * Accordion container.
    .Accordion {
              border-left: solid 1px gray;
              border-right: solid 1px black;
              border-bottom: solid 1px gray;
              overflow: hidden;
    /* This is the selector for the AccordionPanel container which houses the
    * panel tab and a panel content area. It doesn't render visually, but we
    * make sure that it has zero margin and padding.
    * The name of the class ("AccordionPanel") used in this selector is not necessary
    * to make the widget function. You can use any class name you want to style an
    * accordion panel container.
    .AccordionPanel {
              margin: 0px;
              padding: 0px;
    /* This is the selector for the AccordionPanelTab. This container houses
    * the title for the panel. This is also the container that the user clicks
    * on to open a specific panel.
    * The name of the class ("AccordionPanelTab") used in this selector is not necessary
    * to make the widget function. You can use any class name you want to style an
    * accordion panel tab container.
    * NOTE:
    * This rule uses -moz-user-select and -khtml-user-select properties to prevent the
    * user from selecting the text in the AccordionPanelTab. These are proprietary browser
    * properties that only work in Mozilla based browsers (like FireFox) and KHTML based
    * browsers (like Safari), so they will not pass W3C validation. If you want your documents to
    * validate, and don't care if the user can select the text within an AccordionPanelTab,
    * you can safely remove those properties without affecting the functionality of the widget.
    .AccordionPanelTab {
              background-color: #CCCCCC;
              border-top: solid 1px black;
              border-bottom: solid 1px gray;
              margin: 0px;
              padding: 2px;
              cursor: pointer;
              -moz-user-select: none;
              -khtml-user-select: none;
    /* This is the selector for a Panel's Content area. It's important to note that
    * you should never put any padding on the panel's content area if you plan to
    * use the Accordions panel animations. Placing a non-zero padding on the content
    * area can cause the accordion to abruptly grow in height while the panels animate.
    * Anyone who styles an Accordion *MUST* specify a height on the Accordion Panel
    * Content container.
    * The name of the class ("AccordionPanelContent") used in this selector is not necessary
    * to make the widget function. You can use any class name you want to style an
    * accordion panel content container.
    .AccordionPanelContent {
              overflow: auto;
              margin: 0px;
              padding: 0px;
    /* This is an example of how to change the appearance of the panel tab that is
    * currently open. The class "AccordionPanelOpen" is programatically added and removed
    * from panels as the user clicks on the tabs within the Accordion.
    .AccordionPanelOpen .AccordionPanelTab {
              background-color: #EEEEEE;
    /* This is an example of how to change the appearance of the panel tab as the
    * mouse hovers over it. The class "AccordionPanelTabHover" is programatically added
    * and removed from panel tab containers as the mouse enters and exits the tab container.
    .AccordionPanelTabHover {
              color: #555555;
    .AccordionPanelOpen .AccordionPanelTabHover {
              color: #555555;
    /* This is an example of how to change the appearance of all the panel tabs when the
    * Accordion has focus. The "AccordionFocused" class is programatically added and removed
    * whenever the Accordion gains or loses keyboard focus.
    .AccordionFocused .AccordionPanelTab {
              background-color: #3399FF;
    /* This is an example of how to change the appearance of the panel tab that is
    * currently open when the Accordion has focus.
    .AccordionFocused .AccordionPanelOpen .AccordionPanelTab {
              background-color: #33CCFF;
    /* Rules for Printing */
    @media print {
      .Accordion {
      overflow: visible !important;
      .AccordionPanelContent {
      display: block !important;
      overflow: visible !important;
      height: auto !important;
    #Accordion1  .AccordionPanelTab {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg1.png);}
    #Accordion1 .AccordionPanelTabHover,
    #Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
    background:url(../images/package_spry_tab_bg1_RO.png);}
    #Accordion2  .AccordionPanelTab {
    height:44px;
    width:469px;
    background:url(../images/packages_spry1.png);}
    #Accordion2 .AccordionPanelTabHover,
    #Accordion2 .AccordionPanelOpen .AccordionPanelTabHover {
    background:url(../images/packages_spry1_ro.png);}
    #Accordion3  .AccordionPanelTab {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg2.png);}
    #Accordion3 .AccordionPanelTabHover,
    #Accordion3 .AccordionPanelOpen .AccordionPanelTabHover {
    background:url(../images/package_spry_tab_bg2_RO.png);}
    #Accordion4  .AccordionPanelTab {
    height:44px;
    width:469px;
    background:url(../images/packages_spry2.png);}
    #Accordion4 .AccordionPanelTabHover,
    #Accordion4 .AccordionPanelOpen .AccordionPanelTabHover {
    background:url(../images/packages_spry2_ro.png);}

    Okay guys,
    I figured it out, if anyone was having the same problem as me and looking on this thread for the answer, here it is.
    Firstly if you're wanting to seperatly style two or more Spry Accordions that are not within each other e.g.
    <div id="Accordion1" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab">Label 1</div>
        <div class="AccordionPanelContent">
       <p>Content Goes Here </p>
    </div><!-- end #Accordion1 Content -->
      </div><!-- end #Accordion1 .AccordionPanel -->
    </div><!-- end #Accordion1 -->
    <div id="Accordion2" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab">Label 1</div>
        <div class="AccordionPanelContent">
       <p>Content Goes Here </p>
    </div><!-- end #Accordion2 Content -->
      </div><!-- end #Accordion2 .AccordionPanel -->
    </div><!-- end #Accordion2 -->
    You don't have to do this, as long as you have seperate ID's for the divs (which dreamweaver automatically does anyway) you'll be fine.
    However if for some reason you want to put one accordion inside another like I did e.g.
    <div id="Accordion1" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab">Label 1</div>
        <div class="AccordionPanelContent">
       <p>Content Goes Here </p>
    <div id="Accordion2" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
        <div class="AccordionPanelTab">Label 1</div>
        <div class="AccordionPanelContent">
       <p>Content Goes Here </p>
    </div><!-- end #Accordion2 Content -->
      </div><!-- end #Accordion2 .AccordionPanel -->
    </div><!-- end #Accordion2 -->
    </div><!-- end #Accordion1 Content -->
      </div><!-- end #Accordion1 .AccordionPanel -->
    </div><!-- end #Accordion1 -->
    Too style Accordian 1 & 2 so their tabs both have different backgrounds and Hover background when the content panel is open and closed you have to style it in the CSS they following way;
    CSS
    #Accordion1  .AccordionPanelTab {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg.png);}
    #Accordion1 .AccordionPanelTabHover,
    #Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg_RO.png);}
    #Accordion2  .AccordionPanelTab {
    height:44px;
    width:469px;
    background:url(../images/packages_spry.png);}
    #Accordion2 .AccordionPanelClosed .AccordionPanelTabHover,
    #Accordion2 .AccordionPanelOpen .AccordionPanelTabHover {
    height:44px;
    width:469px;
    background:url(../images/packages_spry_ro.png);}
    Normally when styling two seperate spry accordions you can just use the following code
    #Accordion1  .AccordionPanelTab {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg.png);}
    #Accordion1 .AccordionPanelTabHover,
    #Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
    height:75px;
    width:285px;
    background:url(../images/package_spry_tab_bg_RO.png);}
    The only difference with styling a Spry accordion within another to ensure they have different hover backgrounds when the content panel is open and closed is ".AccordionPanelClosed".
    Hope this helped anyone who was having the same issue I was.

  • How to change the paragraph style of every paragraph that only contains an anchored object?

    Hi,
    I have a document in word that needs to be converted into indesign. The document containts instructions, each step followed by an image.
    I've managed to import the document into Indesign, and applied a paragraph style with numbering to everything (text an image).
    Now, how to change the the paragraph style of every paragraph that only contains a image? I need to get rid of the numbering.
    Thanks in advance.

    Create two Paragraph Styles and name them Image and Non-Image. Apply the paragraph styles manually to the text containing image and not containing images.

  • Different styles to the portlet regions

    Oracle Portal 9.0.2.2.22
    How to apply different styles to the portlet regions within a page?
    Regards
    Rajesh Kumar

    Hi Rajesh -
    Unfortunately you can only change the style of item regions, not portlet regions. If you only need to change the portlet background color there is a little trick you can do with version 9.0.2.6 (I do not have a 9.0.2.2 build to try with)
    Place the portlet that should have a different background color on a different page. Set the Style property for this page. The style should set the Common background color as the color you wish to be the portlet background color. In the style, set the portlet background color to NULL (allowing the common background color to show through). In the page properties, on the optional tab, expose this page as a page portlet, and ensure the page does not use the style of the page on which the portlet is placed.
    Now expose the page portlet on the page you originally wanted the portlet to show.
    Hope this helps. I would be interested to know if this also works in 9.0.2.2 as in 9.0.2.6.
    Thanks,
    Candace

  • How to apply different styles to Portlets on the same Portal page?

    How do you apply different styles to Portlets on the same Portal page?
    I'm new to this kind of thing, but understand that something called "cascading style sheets" can help here?
    What are these, how do you use them, and can you make different Portlets (all types - PL/SQL, Java, Applications, etc) on the same Portal page have different styles assigned?
    Thanks!

    Jeff,
    Apply Oracle Portal styles at the region level. Your portlets within each region will inherit the style defined for the region.
    You may want to check out Report #40050 at portalcenter.oracle.com, "Design an Attractive and Compelling Portal Interface" for a good overview of the various design features of Oracle Portal.
    Here is the link:
    http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/OWSF_2003_PAPERS/40050_STOVER.PDF
    Regards,
    Jay

  • How to apply different styles to multiple spry collapsible panels?

    Hello every.
    I would really appreciate some help with this problem I am coming up against.
    I am creating a website which has multiple Spry collapsible panels in it. I applied the styles I wanted for the first Spry collapsible panel I did in the styles panel with no problems what so ever.
    However when I go to apply the styles I want for my second and every other Spry collapsible panel, when I applied the style I wanted it changed the first panel I did. I’ve tried giving all my collapsible panels different Div ID’s but no luck. I just can’t seem to apply different styles to each of my collapsible panels.
    Can someone please advise me how to do this?
    Thank you in advance for your help.
    Kind regards
    Elliot

    I've figured the most of it out.
    By giving the Spry Collapsible Panel that you want to style differently a separate ID and class and then duplicating the original Spry Collapsible Panel style in the CSS style panel on the right and renaming them the same name as the panel you want to style differently it will allow you to style it differently to all the other panels apart from the Hover.
    I've tried everything! Below is the code I'm using for the two Collapsible Panels I want to style Differently.
    I only want to have different Tab backgrounds and Hover backgrounds
    1st Spry CollapsiblePanel
    Code:
    <div id="CollapsiblePanel1" class="CollapsiblePanel">
        <div class="CollapsiblePanelTab" tabindex="0">Tab</div>
        <div class="CollapsiblePanelContent">Content</div>
    CSS Style
    .CollapsiblePanelTab
    .CollapsiblePanelTabHover, .CollapsiblePanelOpen .CollapsiblePanelTabHover
    2nd Spry CollapsiblePanel
    Code:
    <div id="CollapsiblePanel2" class="CollapsiblePanel2">
      <div class="CollapsiblePanel2Tab" tabindex="0">Tab</div>
      <div class="CollapsiblePanel2Content">Content</div>
    </div>
    .CollapsiblePanel2Tab
    .CollapsiblePanel2TabHover, .CollapsiblePanelOpen .CollapsiblePanel2TabHover
    As I said the Tab works both I have two seperate background images for the Tabs but I can only seem to have one background for the hover.
    Has anyone any ideas on how to get around this?
    Kind regards
    Elliot

  • Different languages in different styles

    In the previous version of Pages, I could choose a language for my different styles. Now, it automatically chooses a language for me. I use both English and French, and I would need to be able to assign a language for every style. Help please?

    You could create different styles and name them French, English or which ever you like, and use them for the text you see is French, English or which ever. The Spell check will work for any language (that the computer have dictionaries for) if you have Automatic language set in the System preferences.

  • Style for following paragraph only works for RH default styles?

    I'm creating my own styles in the styles and formatting pod. When you choose 'Edit' and then fiddle with the settings in the dialogue box, there is an option for "Style (style for following paragraph).
    This is a great feature. The problem is, it only seems to work if you choose a style that existed by default in RH (e.g. Heading 1, Normal). When I choose a style I created, the next style created with a hard return is just a repeat of whatever style you were in on the previous line.
    It's hard for me to understand why it won't work with any of the other styles I created, since they all appear in this dialogue-box list as options. Could someone please enlighten me?

    I'm using the default style sheet. I've added my own topics in it.
    Any other thoughts?

  • Select different style for each border of a rectangle

    Hi,
    I just wanted to have a Rectangle (or some other component) which one must have different style for each of its borders.
    For example I want the top and the right border with a thickness of 2 and others with a thickness of 0 (so we can only see those two borders).
    How can I do it ?
    I tried with stroke (but stroke is for all borders, we can't specify which style for which border).
    Thanks,
    Jeff

    Well it is not clear what he is looking for just rect or a component with specific border. I havnt used flex 4 so i am not sure how to get it working for that
    , but i am sure it will work on the same lines.
    I have also given another option to create a it using lineTo() and moveTo().But this should only be used if this rect is not going to be used as a container.
    I think i should elaborate...
    Create a custom component using UIComponent. In updateDisplayList() after super.updateDisplayList() call a method say drawRect(). In this drawRect() use lineTo() and moveTo() to draw the rectangle. you would have to use the component's height and width to draw the rect.
    Let me know if you need more clearification...

Maybe you are looking for

  • Airtunes speakers don't work for tv shows or movies

    I am disappointed that I can't figure out how to play movies or tv shows through via air tunes ad speakers connected to my airport extreme. Am I missing something? Works with music, just not video. Duplicated problem with itunes on both mac and windo

  • Flip 4 Mac no video

    I have installed, including upgrades, appropriate for OSX 10.9.1 - I get audio and a black screen - no video - also the every five-second message "this is a demonstration of Flip 4 Mac." 

  • CFGRID with a SELECT box?

    I am dabbling in making a CFGRID now that we have Fusion 8. Ultimately I want to be able to output a grid of data that the user can edit inline. Is it possible to have one of the columns of data be a Select dropdown box? If so can the select dropdown

  • Installation of RFC SDK

    Hello,          As part of the effort to install BO integration for SAP, i have come across installation of RFC SDK as a prerequisite. I have downloaded the RFC SDK from the market palce (7.00 unicode for Windows 64 bit). But i have been reading up o

  • Coherence 3.5 - slow start for a single node

    EDIT - wrong forum Edited by: user10613309 on 30-Jul-2009 02:42