Different ways to configure HA-SKU

Can anyone show me how to configure a 1+1 Ha-sku , a N+1 Ha-sku and a N+1+1(TERTIARY Ha-sku) Where two different controllers can use 1 ha-sku as backup. Thanks
Sent from Cisco Technical Support Android App

Something left out in the guide and an issue I ran into at each install doing N+1 is that AFTER you configure the HA controller. REBOOT ..
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
"Im like bacon, I make your wireless better"

Similar Messages

2 different ways to setup IPSec ?

Hello,
I am currently trying to setup IPSec tunnel between a pfSense router and a Windows Server 2008R2 (The windows server is located behind a router with NAT enable).
First of all, I found two different ways to configure IPsec on Windows :
1) Through Windows Firewall with advanced Security
2) Through IPSec snap-in into MMC.
Which one should I use ?
Well, anyhow I got some troubles to negotiate phase1. By analyzing packets, it turns out that Windows server always return a NO_PROPOSAL_CHOSEN error code.
My settings for phase1 (on both sides):
Authentication method: PSK
Negotiation mode: main
Encryption: 3DES
Hash: SHA1
DH Key group : 2 (1024)
Lifetime: 28800
(NAT-T Enabled on pfSense)
Finally, I noticed that it is possible to define peer identifiers on pfSense. Is it possible to do the same on the windows server or does it automatically use the IP addresses as peer identifiers ?
Any help would be greatly appreciated.
Best regards,

Hi bibibubu1,
The 2008r2 can’t establish an IPsec tunnel behind NAT-T have a known issue, please confirm the following KB meet your environment then install the hotfix. Another possible
is you have select the matching Encryption schemes.
You cannot establish an IPsec tunnel to a computer that is running Windows 7 or Windows Server 2008 R2 through a NAT device
http://support.microsoft.com/kb/2523881
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account. There are 4 users on our iMac. Me, my wife, and our 2 children. We have built an extensive library of music/media together using the same iTunes store account. I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases. What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
Thank you in advance!

OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
Applications - just went through them. About the only one I needed was my media server app. Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine. Installation never seemed quite right on my old machine so solved that problem too.
Movies - New iMovies just copied across the clips and projects into their respective folders. Seems to have worked but haven't checked it all that thoroughly. Some duplicate footage here but I can trim this out at some point when I get a chance to go through here.
Documents - Just copied these across.
Photos - used an app called iPhoto Library Manager. You can download for free but have to pay to use the part that consolidates your libraries. Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore. Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc.
Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter.

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS

Is there a way to configure NTFS file system on an NSS 324 SmartStorage unit. So far I can setup ext 3 or ext 4 but no option for NTFS. This unit should be joining a Windows Server 2008 R2 network and needs to be shared with all users. This unit will replace a File server running Win 2003 SP2.
Message was edited by: Hermann Koster
Thank you very much for your reply. The idea is to decommission the Windows file server which is running Windows Server 2003 SP2 operating system but is not running as a DC but just a member server. All this server is doing is providing file server services so my idea is to replace it with the NSS 324 box. My only concern is that when my NSS joins the domain all my users would be able to see and access network shares transparently, the same way they saw the former W2003 file server. After I transferred the data from File server I will use the same for NSS that was used for file server as well as same IP address and folders path as before.
Any suggestions or advice?
Once again thank you very much for your reply.
Cheers,

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

What are the Different Ways of receiving Acknowlegements ?

Hi Experts,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
Where I can find the related information or standard document about the same.
Please guide.
Regards,
Nitin

Hi ,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
System acknowledgments used by the runtime environment to confirm that an asynchronous message has reached the receiver.
Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver
These are of positive or Negative.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
This is based on your souce system to accept the ack, what is the protocol used to communicate with the source system.
http://help.sap.com/saphelp_nw04/helpdata/EN/55/65c844539349e9b1450581ab44a5e6/frameset.htm
Regards
Harsha Paruchuri

Best way to configure a network comprising WLSE and many APs ?

Hi the Cisco NetPro community,
I would like to have a discussion with you on the best way to configure a network containing a WLSE and a large amount of Access Points.
The network I want to configure comprises some subnetnorks, each comprising about 10 access points (with some advanced settings for security). It might be a quite long and boring process to set the configuration for all those, so I am looking for the quickest and easiest solution to do so.
First of all, the configuration of IP addresses have to be done on each Access Point after unpacking it. The configuration of my network comprises 1 WDS active AP, 1 WDS backup AP and the rest of infrastructure APs, that for each developement site.
I thought about several solutions :
- 1st solution could be to apply a configuration file (i.e. load the config.txt file) to each AP manually, changing some values (IP, local radius...).
But problem is that passwords can't be changed with text editor because of the passwords written in "hash".
- 2nd solution could be to configure each AP (after IP is set) using its web interface.
No more problem for hash written passwords, but this method is quite boring when surfing on menu pages of the AP web interface...
- 3rd solution, which could appear as the best solution, is to create a template on the WLSE, and to apply it to all APs.
No more boring connection to each AP, but problem are : we need to create as many templates as APs (or change some parameters each time), and we still need to set parameters directly to APs before (SNMP, SSH, WDS configuration...), in order the WLSE to manage the APs.
So, what do you think could be the best solution in order to deploy such a network with many APs ?
How is it possible to avoid (so far as we can) the configuration of APs one by one ?
Thanks a lot in advance for your consideration and your ideas !
Alexis.

Well for one of my clients that had over 60 sites, we actually created a couple of templates. We created a basic template and a template for each site. You can have the ap's obtain the configuration from the WLSE, but you need to configure a DHCP option. My client did mac address reservations, but of course you need the mac address first. I guess you can also let the ap get an address and change it later. They tried doing different things, first let the ap obtain a default config and then pushing out the configuration for that site.
As for the hash, you can set the password in ascii... when you do a show run, then of cours it will be hash'd.
http://www.cisco.com/en/US/docs/wireless/wlse/2.12/user/guide/deploywz.html#wp1936755

Different ways to implement OM Module

Hi All,
I am new to this, Please let me know all the 5 different ways to implement OM and PA module in HCM

Basics of OM
OM is mainly used to perform numerous business and human resources processes. As the first step an organizational plan is created. The organizational plan is a functional structure representing the enterprise. In OM, the current organizational plan can be created and additional organizational plans are created as archives (this provides a clear picture of the organization at any point in time:past, present or future). Organizational Management is the basis for additional Human Resources components and functions as well as for SAP Business Workflow.
OM is installed before Personnel Development(PD), Recruitment, Compensation Management (CM/ECM), Workflow, Time Management, Security, ESS/MSS etc. OM structure provides the foundation for these modules and streamlines business processes. For example MSS setup can be such that the manager will be able to view only the details of those working under him/her - the details of persons working under the manager are picked up from OM. Similarly data from OM is used when WF has to route the work of approving the leave of an employee to his/her manager.
OM is based on the objects and their relationships. Jobs, tasks, positions, etc are the objects. These objects are created in OM. The relationship between various objects is also stored in OM.
Transaction codes
PPOM - Change org Unit
PO03 - Maintain Jobs
P013 - Maintain Position
PO10 - Maintain Organizational Unit
PP01 - Maintain Plan Data (menu-guided)
PP02 - Maintain Plan Data (Open)
PP03 - Maintain Plan Data (Event-guided)
PP05 - Number Ranges
PP06 - Number Ranges Maintenance HR Data
PP07 - Tasks/Descriptions
PP69 - Choose Text for Organizational Unit
PP90 - Setup Organization
PP01 - Change Cost Center Assignment
PP02 - Display Cost Center Assignment
PP03 - Change Reporting Structure
PP04 - Display Reporting Structure
PP05 - Change Object indicators (O/S)
PP06 - Change Object indicators OS
PPOA - Display Menu Interface (with dyn.)
PPOC - Create Organizational Unit
PPOM - Maintain Organizational Plan
PPOS - Display Organizational Plan
PQ01 - Events for Work Center
PQ02 - Events for Training Program
PQ03 - Events for Job
PQ04 - Events for Business Event Type
PQ06 - Local Events
PQ07 - Resource Events
PQ08 - Events for External Person
PQ09 - Events for Business Event Group
PQ10 - Events for Organizational Unit
PQ11 - Events for Qualification
PQ12 - Resource Type Events
PQ13 - Events for Position
PQ14 - Events for Task
PQ15 - Events for Company
PSO5 - PD : Administration Tool
PSOA - Work Center Reporting
PSOC - Job Reporting
PSOG - Org Mgmt General Reporting
PSO1 - Tools Integration PA-PD
PSOO - Organizational Unit Reporting
PSOS - Position Reporting
PSOT - Task Reporting
Configuration steps apart from steps which were given by Teja
IMGPersonnel management Organizational management  Basic settings  Maintain number ranges  set up number assignment for all plan versions
Maintain object type:
IMGPersonnel management  Organizational management  Basic settings  Data model enhancement  maintain object type
Maintain infotypes
IMGPersonnel management Organizational management  Basic settings  Data model enhancementu2014infotype maintenance  maintain infotypes
Relationaship maintenance:
IMGPersonnel management Organisational management  Basic settings  Data model enhancement  Relationship maintenance  maintain relationships
Maintain evaluation paths:
IMGPersonnel management Organisational management  Basic settings Maintain evaluation paths
Maintain personnel actions:
IMGPersonnel management Organisational management  Basic settings Maintain personnel actions
Activate inheritance of account assignment features
IMGPersonnel management Organisational management  Basic settings Activate inheritance of account assignment features
Setup integration with Personnel Administration
IMGPersonnel management Organisational management  Basic settings Integration  Setup integration with PA
Transfer data from Pa
IMGPersonnel management Organisational management  Basic settings integration  transfer data from PA
Perepare integration with Pa
MGPersonnel management Organisational management  Basic settings integration Prepare integration with PA
Transfer data to PA
IMGPersonnel management Organisational management  Basic settings integration Transfer data to PA
Check integration consistency
IMGPersonnel management Organisational management  Basic settings integration Check integration consistency

[svn:osmf:] 10124: Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.

Revision: 10124
Author:   [email protected]
Date:     2009-09-10 10:40:10 -0700 (Thu, 10 Sep 2009)
Log Message:
Add a few variations of HelloWorld, showing the different ways of adding the DisplayObject to the Sprite.
Modified Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/.actionScriptProperties
Added Paths:
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld4.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld5.as
    osmf/trunk/apps/samples/framework/HelloWorld/HelloWorld6.as

The connections which you have done are right, Here are some settings which you can set on your computer and check if this solves your problem or not.
Win XP: Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure"   jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
If still you face the same problem, then i feel it might be the problem with the Switch itself.

Best way to configure search toplogoy for multiple servers farm??

Hi,
My farm environment is 2 WFE and 2 App servers. Right now i am trying to configure Search Topology. what will be the best way to configure the search topology for this farm, so that query and crawling will be working perfectly. one thing i noticed with my
previous search application Crawl DB had grown 140 GB, i dont know why it happened. please look at the following screen shot, this the current topology but i want to distribute component to different server.
Any help will be appreciated!!

The best topology depends on whether you want it to be fault tolerant or not. For a fault tolerant design with this number of servers I normally create two Index Partitions 0 and 1 with each on one of the App servers. I then create Replicas of each
partition on the front end servers. I then put the query role on both web fronts ends and the crawl role on both Ap servers. So I end up with the following:
FE1 = Index Replica 0 + Query
FE2 = Index Replica 1 + Query
Ap1 = Index 0 + Crawl
Ap2 = Index 1 + Crawl
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Best Way to Configure Multi-boot System With GRUB/GRUB2

Hello again,
Sorry for posting so much, but I'm really enjoying Arch so far! I had been reading a lot about Cinnamon so I wanted to try it (without installing the dependencies on my Arch installation), so I decided to install Mint, that went fine, and then I was hoping to add the entry to GRUB. I couldn't figure out how to do this, so I decided to try and install GRUB2 because it can autodetect other OS'. Well it didn't work and then I found myself without a bootloader. I couldn't figure out how to reinstall grub to the MBR (I tried the solution in the wiki and a couple of other places). I decided to reinstall Mint, and now I am booting into Arch through Mint's GRUB2. Two questions:
1) How can I fix grub through Arch to have that as my bootloader again? Nothing seems to work that I've tried.
2) What is the best way to configure grub or grub2 from Arch to allow myself options to multiboot other OS's in the future? I want to learn as much about UNIX as possible so I was planning on installing some other Linux distros and some other non-Linux UNIX OS's. I know this is a really newbie question, but I'm at a loss, I thought it was easier than it turned out.
PS. I didn't really like Cinnamon that much. I've been using Xfce and Openbox since I started using Linux (about a month ago), and it just seems too complicated! I don't like how little options you are given for customization. But that's just my opinion, everyone is different, I can see how it would be an improvement over GNOME3.
Thank You!

I have Arch Linux and Debian Testing installed side by side on my laptop.
Arch uses Grub (legacy) and Debian uses Grub2. The way I have set it up is to have Arch's Grub on the MBR and then chainload Debian's Grub2 from there.
Debian's Grub2 is installed on its own partition rather than on the MBR
This is the line I use to chainload Grub2 from Grub (legacy)
# (4) Debian chainload
title Debian chainload
root (hdX,X)
chainloader +1
Additionally just for kicks, I also have an entry in Grub2 to get back to Grub.
menuentry "Arch Linux chainload" {
insmod part_msdos
insmod ext2
set root='(hd0)'
chainloader +1
boot
Note that the (hd0) above always points to the MBR.
I do not have to bother with one bootloader interfering with the other and the OS entries on each are handled separately on their own.
This setup has worked well for me for quite a while now. Before I started with Arch, I used a similar setup when I tried out various distros (Fedora,opensuse,etc.) alongside Ubuntu
Hope it helps !

Create bid invit. from template in two different ways has different consequ

Hi everybody
"Create bid invit. from template in two different ways has different consequuences"
When I create a bid invitation from a previous template, from the template search results (Icon_create SAPLBBP_BID_INV 1010) my bid is published but then stay in the model search and the status is wating for approval. But no workflow started in BBP_PD.
If I use the same template for creating a new bid from the detail using the create bid invitation button, the bid invitation is created correctly.
I have configured the two events for the BUS2200 object and both of them have an initial condition.
It seems that the two actions trigger different events or something like that
Does anybody why it is occurring this and how I could link the workflow without approval for this case.
Thanks

Hi
What SRM version are you using ?
<b>Please see these SAP OSS notes / links, which might help -></b>
<u>Note 976752 - Bidding Worklfows are not triggered correctly
Note 941417 - Creating a bid invitation from template in the background
Note 971752 - Incorrect approval preview in bid approval
Note 741372 - Separating template search from bid invitation search
Note 764028 - New bid invitation items not visible in bid
Note 996907 No approval preview for bid after note 976752
Note 765771 Workflow error when creating a purchase order from bid
Note 790930 No warning message in case of jump from bid</u>
Regards
- Atul

Ways to Configure Which UNIX Server a PC Client Application Communicates With

We have several different MS VC++ "fat client" applications that we want to run
on the same NT 4.0 PC.
Each application uses the Tuxedo 7.1 client to communicate with Tuxedo services
located on a UNIX server.
Each application needs to communicate with a different UNIX server (e.g., application
A1 needs Tuxedo
service T1 located on UNIX server S1, application A2 needs Tuxedo service T2 located
on UNIX server
S2). We'd like to load the Tuxedo 7.1 client software in such a way that each
individual application
controls which server it uses. One way to do that is through registry entries
specific to each application.
We are looking for some documentation or tips on other/better ways to configure
which server the PC
application communicates with. We are also looking for some documentation or
tips on how to best
configure an application that needs to subscribe to services from several different
servers (e.g.,
application A needs Tuxedo service T1 on server S1 and Tuxedo service T2 on server
S2). Thanks.

Matt,
This sounds quite unusual, and I am not sure why you want to do things this way.
Generally, I would expect that the services would be distributed on the server side over
different boxes as you describe, but the location would be transparent to a client app.
which would tpinit once, and Tuxedo would route the requests appropriately. Maybe that's
not how you want to do things because the apps are all logically independent? I'm not
sure about that though, since you describe needing services on different servers in
individual clients... Can you do the integration at the back end?
To do what you describe, however, you need to control the value of the WSNADDR
environment variable before you call tpinit() - it is the network address in this
variable that tells the client libraries which server to connect to. Simply set the
value (from a command line parameter, the registry, an ini file or wherever) with the
tuxputenv() API before you call tpinit()
In Tuxedo 7.1 and higher, it is also possible to connect to multiple different servers
simultaneousy by calling tpinit multiple times and having multiple contexts in the
client.
I hope that helps.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Matt wrote:
We have several different MS VC++ "fat client" applications that we want to run
on the same NT 4.0 PC.
Each application uses the Tuxedo 7.1 client to communicate with Tuxedo services
located on a UNIX server.
Each application needs to communicate with a different UNIX server (e.g., application
A1 needs Tuxedo
service T1 located on UNIX server S1, application A2 needs Tuxedo service T2 located
on UNIX server
S2). We'd like to load the Tuxedo 7.1 client software in such a way that each
individual application
controls which server it uses. One way to do that is through registry entries
specific to each application.
We are looking for some documentation or tips on other/better ways to configure
which server the PC
application communicates with. We are also looking for some documentation or
tips on how to best
configure an application that needs to subscribe to services from several different
servers (e.g.,
application A needs Tuxedo service T1 on server S1 and Tuxedo service T2 on server
S2). Thanks.

More than 16 midi tracks....best way to configure?

What's the best way to configure more than 16 midi tracks?
1) External usb midi box
2) Virtual ports
3) Apple IAC ports
4) Disconnect SUM and connect ports to channel splitters (which are then fed to the instruments)
When configuring more than 16 audio instruments, is the best way to do that to use individual midi instruments as the front end for each, setting the midi port and channel on the midi instrument?
Or...is it better to go through the channel splitters (like in #4 above)?
I've run into some kind of midi cross-talk anomaly that I can't find (still after a LONG time searching), and I can't help but think it might be in my environment setup somehow.
Anybody like a good mystery? All help appreciated!!!
Cheers,
S.

Hi,
Firstly, please get rid of the term VST. Logic only uses Audio Units, and they work a little differently "behind the scenes".
Ok. Now that you said the magic "only internal" synths phrase:
In the current Environment, I've made a separate "midi instrument" for each "audio instrument" device. I'm using the "midi instrument" to set the port and channel of each separately.
You do not need to do this. Because you are using internal synths (If you clue us in on WHICH ones....that could help too...unless that is a State Secret)
Somehow, I've managed to get the problem down to one annoying item: I have a chimes part that has some sustained notes that are being CUT OFF in mid-note. There is nothing in the Event List for that track that would explain this, so I'm guessing that the track must be receiving some midi data from someplace else.
My best guess is that you are playing back a Midi note that is, say XXX length, and the SAMPLE is only XX length. That would explain immediately why it is being "cut off".
OR...there is simply too much midi data at that point that the track....no that can't be because the music is thin there. I don't know. I just can't find it.
THAT is a delicious piece of speculation. Please inform yourself about what is really going on. Your posted question is totally misleading.
You don't need 16 tracks of Midi because ONE sound is not playing back the way you want. Your problem has NOTHING to do with the question that you put forth:
More than 16 midi tracks....best way to configure?
Where is the cut-off chime sound sample in this question??? Nowhere... and nowhere is the answer...oops...
I can't help you further, as I already spent a long time helping you set up an imaginary Midi setup that does not even exist, nor even solves your issue.
Cheers
Brought to you by the wise noeqplease, sans caffeine

Is there a way to configure win 8 Laptop to airport express? I can see theN connection to the wireless network, but troubleshooter suggests there's t

Is there a way to configure win 8 Laptop to airport express? I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
shows limited. Any help you could provide would be most appreciated. Further, should I simply buy another router for the windows machine? If I did that, would it interfere with the airport?

The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS. This is mainly because the RAM designed to fit with the customized Linux OS's size.
You can connect to an external HDD via a USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
Hope that helps!!

Different ways to configure HA-SKU

Similar Messages

Maybe you are looking for