Digital signature on the update is missing? So cannot load updates for MacBook or synch Ipad - Help

Digital signature on  the update is missing or invalid.This message appeared when trying to up date ITunes in order to Synch with a new IPad.

Wondering how to download from update site? I have 10.6.8 and need to upgrade, do I jump to the most recent version, or to 10.7?
Also, if the automatic update doesn't work, what do I do to use something from the download site?

Similar Messages

  • "digital signature on the update is missing or invalid" 10.6.8 combo 1.1 from 10.6.3.

    Also got posted in '10.3 or earlier' community, where other posts are regarding this issue ... I get "digital signature on the update is missing or invalid" trying to install 10.6.8 combo on MacBook currently using 10.6.3.  Have used Disk Utility, Restart, Shut Down, with no luck.  Used Software Update from 2 different avenues, and also downloaded from apple site.  Also searched support.apple, no luck.  Thoughts?

    ok. i've done the moving of those plist files, restarted and tried again. it hasn't worked, but thank you for your suggestion. i got excited for a minute or two.
    it now says An unknown installation error occured. The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance.

  • I got the update for iOS 7 on iPad it said not enough room I made room then said failed now it won't offer update

    I can not update it was saying I could  but not enough room I made room tried to update said failed now says iOS 6.1.3 up to date and no iOS 7 being offered to update what do I do

    Do you have the latest version of iTunes installed? I Was able to get to the iOS update after installing the new iTunes, but I had to download it at http://www.apple.com/itunes/

  • Second digital signature invalidates the first one

    Hello to all,
    I'm having some troubles adding a second digital signature to an already digitally signed PDF. The library that I'm using in order to handle the PDFs is an open source one, so I'm programmatically editing the PDFs. The first PDF I produce, PDF1 (the PDF with one signature), has a valid digital signature. The second PDF I produce, PDF2 (the PDF with the two signatures), has the second signature marked as valid, but the first one as invalid with the following error:
    Error during signature verification. 
    Unexpected byte range values defining scope of signed data.
    Details: The signature byte range is invalid
    I've read and applied all the "best practices" on PDF digital signature, so I'm adding the second signature in incremental mode and I'm sure that the second PDF has no changes in the first part, this because if I make a binary comparison of PDF1 and PDF2, the first part of the PDF2 equals PDF1. So if you remove the incremental part from PDF2 (after the first %%EOF), you obtain PDF1 again with the valid digital signature. So the problem seems to be in something new in the incremental part of PDF2 that makes Acrobat Reader X thinks that the first digital signature is invalid.
    If you want to see the three PDFs, here are the links:
    The original PDF: https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0BzrgexS80Iq_ODQxZTY2MDk tNTQyYi00YTE0LTk0MTctYWMxNDFiOWY4MjA5&hl=en_US
    PDF1: https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0BzrgexS80Iq_ZDQ3MTk1ZmI tNWI4NS00YzdhLTkxNmUtODk1NjVmY2M2NTVh&hl=en_US
    PDF2: https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0BzrgexS80Iq_ZGM1YmZhMWE tY2JiYi00YzZkLWE5ZjItNzgwM2RlNzExYWE1&hl=en_US
    Any help will be very apreciated. Best regards.

    Hi,
    I'm not sure if this helps, but I found something unusual with your PDF2. Just at the beginning of the second incremental update (with the new signature), the first object is added without a carriage return. This make the last line of the previous update looks like this:
    %%EOF3 0 obj
    May this leads to incorrect parsing and then invalidates the signature? Not sure about that, but as far as I can read offsets, your byte ranges are correct.

  • To print Digital signature on the Purchase Order

    How to print Digital Signature, on the PO Print copy (PDF).
    It will be based on release strategy. Whoever is approving the PO, his signature should be printed automatically on the Purchase Order.
    How to achieve this ??
    Please let me know in detail
    thanks
    amit

    Hi Amit,
    I am not sure on how to get the the signature of the person who released the PO, because as per my understanding the Relase Strategy i.e the Relase code is attached to a Basis profile.
    What I would suggest is if you can get all the guys who can release a PO and define him as a Purchaser ie. a Purchasing group then it would be easier to print his signature in the PO.
    Here are the Highlevel steps
    1. Just have the Signature you want to print in a Tiff format.
    2. You can upload the signature as a standard Text using program RSTXLDMC to upload and give a text name.
    3. call the text name in your sap scripts.
    reward if useful.
    Thx,
    MJ

  • Freetype OR digital signature in the same field?

    Hello, 
    I'm creating a form for someone who wants to be able to use a digital signature OR free type within the same field.
    I've tried creating a new combo box with the free type as the first option, but can't seem to figure out a way to have a digital signature as the second option. 
    Does anyone know if it's possible to get both options in one field? 
    Thanks in advance.

    Thanks, George.  You've helped me several times in the past and I know you're a power user, so if you say it's not possible, I know I'm barking up the wrong tree!    Appreciate the reply.

  • Digital signature increases the file size

    My digital signature increases the file size from 262kb to 15meg.  How can I reduce the file size?

    Actually, it sounds normal. Try turning off the preference "Include Signature’s Revocation Status When Signing" but be sure you understand the consequences... that space is being used for something that might be important.

  • HT202157 When I try to update my Apple TV software, I get an error message "update was unsuccessful try again later". I've tried downloading the update for two weeks. Are there any recommendations?

    When I try to update my Apple TV software, I get an error message "update was unsuccessful try again later". I've tried downloading the update for two weeks. Are there any recommendations?

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Specify the update for line ID COP Error message

    Hi Experts,
    I get the following error message
    Specify the update for line ID COP
    Message no. KJ335
    Diagnosis
    You have assigned cost elements to line ID COP, but you have not yet specified the results analysis cost elements under which the results analysis data is to be written for this line ID.
    Procedure
    Go into Customizing and specify the results analysis cost elements under which the results analysis data is to be written for line ID COP.
    However in T code OKGB i have linked COP to cost elements for Expense accounts and ZMA for Balance sheet accounts.Also i OKGA i have give different secondary cost elements for WIP and Reserves. and for ZMA same secondary cost elements for WIP as well as reserves
    In OKGB i have given the balance sheet account and the expence GL
    Is there anything that i have missed
    Thanks in Advance

    Hi,
      Please read note 525804.
    1> If KJ161 is issued for a cost element which is intentionally not assigned to a line-ID, please follow the instructions of note 302823 to solve this issue.
    The note 302823 gives details on how to add the cost element line id and also the use of enhancement 7 to control the message.
    If you're in this case, pls follow the steps in note 302823 for each "Option", there are not only changes in OKGB, but also some changes needed in OKGA (e.g. assign category 'N')
    2> If this cost element should be assigned, please double check the entries made in TA OKG5. Please do especially check if all hints of note 18472 are considered. Very often,filling the fields 'Masked cost center' and 'Masked activity type' with '+' solves this issue as well.
    In the Extended log (KKA1 > Extras > Logs > Parameter List), check if you can see that cost element  is not assigned, but in
    configuration transaction OKGB, masked cost element  is assigned.
    regards
    Waman

  • When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a problem with this version?

    Question
    When on Facebook (for example), Firefox is not allowing me to open pictures; when using apps, the bottom of the screen is missing so cannot utilize the apps. All working on Safari; just downloaded new Firefox 4, so seems to be a proble

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    See also "Help About".
    *Tap the Alt key or press F10 to show the Menu bar.
    In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
    *There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
    *If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
    *You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
    It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
    See also:
    *https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
    *https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
    *https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox

  • TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is

    was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is useful

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • I can't get update iWork because I updated keynote first so it says I have a newer version of keynote and quits the update for the rest

    I got a new mac with lion on it and I transfered all my stuff from the old mac to the new one.  When I went to use iwork the programs did not work anylonger (I do own the disc and tried reinstalling but no good).  I found the update for Keynote on the apple site and that solved the problem for keynote.  Then I saw the update for the whole iwork program and tried to do that as well but it won't let me run it because it says I have a newer version of Keynote already installed.  How do I get the update to work or how do I get the same type of update for numbers and pages individually?  Thanks!

    Try the following user tip with that one:
    Empty/corrupt iTunes library after upgrade/crash

  • I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this?

    I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can't call the helpline because it won't let me leave this screen on the phone that says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." What it says on iTunes after I fill out the activation info is "There was a problem activating your iPhone. Please contact Verizon Wireless at 1-800-922-0204 to have this iPhone added to your account. Click Continue to be able to explore its features and the App Store." Please help this is driving me nuts!

    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

    I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

    If you didn’t erase the drive and install using you AppleID, then the OS and the purchased apps are still registered to the other AppleID. You cannot change that by logging into iCloud. Apps are forever tied to the AppleID used to purchase/download them.
    You have to erase the drive and download/install the Apps using your AppleID.

  • Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

    Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon

    See these previous discussions help.
    App Store Updates (but only Updates)...: Apple Support Communities
    Apps suddenly don't update: Apple Support Communities

Maybe you are looking for