Dim Browser Service Button is not properly configured

I have created a report in Web Analysis Studio with a Dimension Browser service button, but when I open the report in Workspace the service button does not work. I am getting the following error message. "Dim Browser Service Button is not properly configured" Please let me know if I can use the Dimension Browser service button in Workspace.
Edited by: user9321517 on Mar 11, 2010 9:28 AM

Version 11.1.1.3
In Desginer mode I added services to my view
I choose dimension browser from the options
selected the data source and changed the title.
When I open the report in Workspace I receive the error that its is not configyred properly
Please help

Similar Messages

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Scrolling of dinamani site in firefox using key board not properly configured?

scrolling of dinamani site in firefox using key board not properly configured?
by using down arrow i am unable to scroll
instead it goes to end of page
previously ie. about 4-5 months back this problem was not there

You may have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

I am unable to open the latest update (10.4) iTunes not properly configured

when I attempt to open it says iTunes was not properly configured and then close - I can't reinstall 10.2 since 10.4 in installed; it won't repair because mid-way thorugh it pops up "itunesresources is not an accessible file... make sure you have access to this file" and stops the repair.
any thoughts?
I HAVE used 10.4 since upgrading - I shut down my computer; when I rebooted a few days later, this is what happened...

Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT5594 I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

The SSL support feature is not properly configured. Https is not available.

Hi all
We get the following warning message even though we are not using SSL.
"The SSL support feature is not properly configured. Https is not available."
I tried with the following parameter set to false in the MobileEngine.config, still the same warning occurs for each synchronization done. But the sync works fine.
MobileEngine.Security.SSLSupport=false
Had any body come accross this one, if so please let me know.
Thanks
Raj

Hi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter <b><i>MobileEngine.Security.SSLSupport=false</i></b> but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar

Browser back button does not work (IE) - Error On Page message

Just take over website from our designer; I'm new, probably doing more fiddling on the live remote website than I should be...
http://www.cmcwny.org
Error On Page message, internal links work, but the browser Back button does not (at least in IE).
I have a backup of my local site from before this happened, but I do not know how to actually replace it.
Any help on either issue will be appreciated, thanks!
Larry Congdon
Buffalo, NY, USA

Hi
First, get rid of your designer, the page design/code is a mess.
There are a number of problems with the page, not least being the disabling of the back button in all browsers I tested it in, (visitors may visit once with this, but are unlikely to do so a 2nd time).
The menu system is a fixed size so that when the browser is resized it overflows the browser window.
The use of tables for layout is not recommended as it is inaccessible to users using assistive devices.
To put this more politely, if you paid for this, ask for your money back. If you did not pay, then start again and use one of the dreamweaver layouts for your page, for more info, see - http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html.
PZ

SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
Gaurav

Hi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li

The browser back button is not working correctly when using the search funtion in ProBoards forums. Is there a known issue with ProBoards & FF?

I have submitted a bug report to ProBoards, but they cannot duplicate the problem I am having, so I am submitting this here in hopes you can find a solution.
At ProBoards Support and another PB forum while doing searches I found this problem, which continues with repeated testing over the past week or so:
url: http://support.proboards.com/search
1. enter perameters for the search (posts only by staff for the last 2 days)
2. choose one of those post results & click on it (choose a post on page 14 and not on page 1 of the results)
3. using the browser back button, attempt to return to the previous page of search results
4. rather than being taken back to the search results with my parameters, the search parameters have been removed and the page show 1000 results of posts by everybody.
I have tested this over and over again, disabling plugins, and nothing seems to alter the malfunctioning of the back button when I am doing this search function at ProBoards.
I have tested it in Internet Explorer and find that in IE the browser back button works properly with ProBoards searches. I always get the result I expect, so it's a problem with how FF interfaces with ProBoards, I think.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Browser REFRESH button does not return to the same iView/Page

Hi,
In SDN site I have seen that in whichever menu i am in, if i use the browser refresh button i return to the same page. But this does not happen on my enterprise portal.
Can you please let me know, how to set / configure the enterprise portal EP7 such that, if am in any iview and use the browser refresh, then i am returned to the same iview / page and not to the first page of the menu. Currently in my portal, when i hit the browser REFRESH button, it takes me to the first page/iview.
Thanks,
Anirban

Dear Romano,
Thanks for your reply. With the help of the document link that you have provided, i have been able to achieve my target partially. Currently i am able to refer to the iView and Role directly using the QuickLink and when i access that particular iView & Role using the QuickLink and then do a refresh, the same screen appears. This part is working fine. But i have one issue.
But generally a iView/Role is accessed not via the QuickLink on the browser but by clicking on the Role on Navigation Level 1. Even though this Role has a QuickLink, it is not visible in the address bar since the QuickLink URL was not used for reaching the Role. In such a situation, when we press the REFRESH button, the iView / Role is vanished and the browser returns to the first default page of the portal.
Can we somehow make it such that whenever the Role is accessed in the Navigation Levels, it can be accessed via QuickLinks and the QuickLink URL is displayed on the address bar ? If this can be achieved, then i guess the problem will be solved.
I hope i have been able to get across my point. Hoping to hear a positive reply from your side.
Thanks in advance.
Regards,
Anirban Kundu.

Web Services button does not work

My friend purchased this D110 printer and he presses Web services button nothing happens. It is currently connected to Dlink router and we can access the printer from the laptop, however, when selecting product updates it says it is updated.
Also it does not display the email Id and even after selecting reset in the menu.....help
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

David:
Can you please:
1. Confirm that the Wireless button on the front of the printer has a solid blue light?
2. Press and release the Wireless button and confirm that an IP address is displayed in the top-right of the display. It should start with 192.168...
3. After confirming 1 and 2 above, return to printer home screen, and press the Wireless button and select Web Services Settings from the menu.
4. Take the appropriate option below:
A. If the "Remove Web Services" option is displayed, select it. Then continue with step B below to re-enable web services
B. If the "Enable Web Services option is displayed, select it.
5. Complete the Web Services enablement process, which should result in a print out of the Web Services info sheet with a new email address for the printer.
6. Go to www.hpeprintcenter.com and create an account and add your printer to your account using the printer code on the Web Services info sheet you printed out. This will allow us to track the results of your emails if they don't print.
7. After adding the printer to your account, send an email to your printer, ensuring you enter the email address correctly
8. If the email prints on the printer, you're good.
9. If the email doesn't print, look at your Job History on www.hpeprintcenter.com and let us know if you see an error message in the job list, and what it says.
Thanks!
Press and release the Wirel
I am an HP employee.

Firefox updated now my browser service email does not open completely when I tried its suggestion could not change the default? Any ideas to help me?

I can not get my browser email to open up. It is through mediacom and they say they do not support firefox yet it always worked till today after I cleared all my history earlier today. I have tried to do the steps it says but no way to add my correct mail server name in. I am not really all that good on hte computer on some things and this is driving me nuts. Any help would be appreciated.

When you cleared your history, did you select Cookies and/or Active Logins and clear those? That could explain why you are not automatically logged in.
I have not used the Zimbra mail server. However, generally speaking, when you are using webmail, you usually do not need to enter a mail server name. Usually you just have to login.
Where does the site stop working for you. Can you log in and get to the next page, or does it require you to keep trying to log in? Can you view the Inbox? Can you open individual messages? Et cetera.

Error: Service types have not been configured

Has anybody any ideas - I get this when I am trying to create an appointment in Collaboration?
Thanks in advance

Hi Phil,
Have you configured Collaboration ?
http://help.sap.com/saphelp_nw04/helpdata/en/02/cb6b4060a1181ce10000000a1550b0/frameset.htm
In your repository, have you active collaboration services ?
Patricio.

Browser settings button will not work!

Hi, When I open my browser on my z10, I am unable to access the settings. If I swipe down, nothing happens, and if if touch the 3 dots, still nothing. Is there a way of re-installing the browser maybe? Any ideas would be appreciated. Kevin

You can try the following options.
1. Do a battery pull and wait 5 minutes then pop it back in.
2. Restore you system to a backup before the browser stopped wroking.
3. BB Link Factory restore and start from scratch.

Alternate access mappings have not been configured.

Alternate access mappings have not been configured. Users or services are accessing the site
http://spwf01:84 with the URL
http://10.168.3.26:84. This may cause incorrect links to be stored or returned to users. If this is expected, add the URL
http://10.168.3.26:84.
as an AAM response URL. For more information, see: http://go.microsoft.com/fwlink/?LinkId=114854"/>
why I am receiving these errors? even alternanet acess maping is configured
adil

error message is saying your AAM settings are not properly configured, May be you are trying to access site using the URL which is not registered in the AAM. usually when we trying to browse the site using IP address or Server name.
check this post more detail:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/aea5a5c7-761b-4c49-89df-d313d52f1ee7/alternate-access-mapping-errors?forum=sharepointgenerallegacy
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Dim Browser Service Button is not properly configured

Similar Messages

Maybe you are looking for