Dimension that mention Sales Promotion Girls

Hi experts,
I have needs to generate report in OBIApps that show Top 10 New Contact Generating by Sales Promotion Girls (SPG).
May i know if in Marketing Analytics, is there any dimension that specify data of SPG?
I have already searched in W_EMPLOYEE_D, W_HOUSEHOLD_D and W_VENDOR_D but i find none of the data inserted in Siebel is recorded there.
Thanks,
Iwan

So after several weeks of back and forth via AndreaS_VZW, I am glad to say Verizon has come through and resolved my issue. It was by no means an overnight process, and there were some hiccups along the way (not AndreaS_VZW's fault by any means), but thanks in large part to AndreaS_VZW I am now back to being a happy camper.
Kudos to AndreaS_VZW for her patience and professionalism throughout my ordeal. I also appreciated the fact that she provided me with unsolicited status updates during the process. Hope anyone else facing similar issues will have as much luck as I did.

Similar Messages

  • Sales Order related to Sales Promotion

    Hi friends, I need your help about Sales Promotion and Sales Deal.
    I created a Sales Deal with reference to a Sales Promotion, but if I create a Sales Order, how can I tell the system that this Sales Oder should use the Sales Deal conditions.
    Thanks a lot,
    Gerardo.

    Hi Gerardo, as far as i know, you will have to configure these conditions identically in the target doc. still see if copyingcontrol helps u in this

  • Why in September when I purchased a through the Edge program with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended), is no longer valid?!  2 months after getting the Edge device, I go to make a c

    Where is the insurance and original Edge Agreement from September?  No one in Verizon knows. I purchased (rented) a Galaxy S4 through the Edge program, with the $5.00 insurance/protection plan (that the sales associate handling the purchase on the phone recommended),which is no longer valid!  2 months after getting the Edge device, I go to make a claim and Asurion will not honor it because I am not covered; however, all the order confirmation receipts emailed and physically sent with the device show the addition of insurance when I signed up for the Edge program.  According to Verizon (via live chat with 'Nicole'), this $5 protection plan no longer exists and the order numbers I have on my paperwork (multiple documents) are invalid in the Verizon system.  For over a week, I have spent more than 10 hours on the phone, live chat and in the store trying to get some sort of resolution and the customer service reps just put me on hold or promise to "call me back within 30 minutes after they speak to a supervisor" and (surprise!) they never return my call.  Or they send me to the store to show proof of my documents, but then those associates cannot help either.  Also, the 'Edge Agreement' in my profile has the wrong device (and serial #), wrong payment amounts and no mention of the 'consumer protection plan'  on it, which is listed on the order confirmation sent via email and with the actual Edge device on September 23.  Obviously, there was some sort of glitch or mistake on Verizon's part, but NO ONE WILL EVEN TRY TO ACCEPT THAT FACT!  WHY WON'T ANYONE GET BACK TO ME WITH SOME SORT OF EXPLANATION FOR ANY OF THIS?!  Is it typical for Verizon to do away with a service (i.e., $5.00/month protection) and not inform the customer of this?  And is it company policy to be as unhelpful as possible to a paying customer who needs assistance when there is cleary something wrong on your end?  And finally, am I really suppose to believe that Verizon customer service has no email addresses or fax machines so a customer can send you proof of what is on the receipt you sent and that I have to take more of my time to go to the actual store?!  Finally, does anyone at Verizon even read these messages or even give a F@#k about the customer as long as they keep making money?! 

    RLites22,
    I can understand your concern about the insurance you have on the line. I want to make sure that I put a fresh pair of eyes on your account to find out exactly what is going on. I did send you a Direct Message. Can you please respond back to me in the direct message so we can go over the account specifics. I really hope to hear back from you soon.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Linking Sales Promotions to Statistical Internal Orders

    We have two kinds of promotions here.
    a) Consumer Promotion - reduced price for a particular period
    b) Trade Promotion - Free goods - buy 10 get one free.
    We are creating these promotion through standard SAP route with a validity period, and these get populated in the sales order order correctly.
    The promotionional expenses are borne by the supplier (vendor). To debit his account with the appropriate expenses, we have created Statistical Internal orders (SIO) in CO, one per supplier account.
    (We have developed a report where we accumulate all the values dueing these two above promotions and manually pass a JV in finance in the SIO.This is a long circuitous process and we are exploring other alternativesto make the values flow directly to the SIO)
    If you double click on the sales order item, and proceed to Account Assignment tab, you will see an order no., where you can select the (SIO) no., which we are doing manually.
    I am unable to find any place in configuration of Sales Promotion/Sales Deal/ SIO (definition) through which I can default the SIO no. in the sales order, so that the values can flow automatically.
    Please help if possible.
    Thanks & Regards
    AN

    I think that this is not possible.
    Roberto

  • Sales promotion

    dear sap sd gurus
    help me with the sale s promotion as i can not configure the sales promotion vb21 and vb31.
    and please clarify me regading agreeement..and its pricing...
    thanks in advance
    -jaydev

    hi dev
    You can use the sales promotion component to manage a wide range of marketing activities. The standard R/3 System contains the following sales promotion types:
    Direct mailing campaign with follow-up activity
    This document helps you organize the sending of product information or promotional gifts and manages the creation of the relevant follow-up activity.
    Internet mailing campaign
    The Internet mailing campaign (sales activity type 0104 in the standard system) has the same characteristics as the direct mailing campaign with follow-up activity except that the output for the Internet mailing is sent via Internet.
    Direct mailing campaign without follow-up activity
    This document also helps you organize the sending of product information or promotional gifts. You can choose whether you want follow-up activities to be created.
    Collectively generated sales activities
    This sales promotion type functions as a worklist. For example, you can create a list of addresses of all customers who have not been contacted over a specified period and initiate a telemarketing campaign to that targets these customers. You can then follow up the telephone calls with a sales call.

  • Query time affected when using dimensions that are at a lower grain

    Hi all,
    I have a product dimension that has one hierarchy and 7 levels: All Product -> Category -> BU -> Class -> Department -> SubDept -> Item. The lowest level has about 8 million members. The Department level has about 1500 members
    Some of my Cubes are actually mapped to fact tables where the grain is at Department level. So I've ensured that in the Cube Mappings Editor, the Department Id of the fact table is mapped to the Department level of the Product Dimension, and I can actually see in the Cube's Aggmap, it is using LOAD_STATUS to limit the Product dimension to the Department level members for the aggregation.
    Querying the Cube using SQL brings back the correct result across different level combination, however the query constantly takes about 2 - 3 mins to complete.
    As a test, I've built another dimension that goes down to the Department level only, and issue the same query against the Cube. The difference is significant as the query takes roughly less than 1 second to complete, and returns exactly the same result.
    Any idea? I am using AWM 11.2.0.1.0A
    Thanks

    The stats you posted are puzzling. Usually the sum of loop and fetch time is close to the total time, but there is a big missing chunk of time in your case. It is clearly related to the calculated measures, since removing them solves the problem.
    The most common problem with calculated measures is that they can cause the cube to loop densely (i.e. all logical member combinations) instead of sparsely (i.e. only the member combinations that have data). But I don't think this is the problem in your case since the difference between rows_read and rows_returned is small
    ROWS_READ 212ROWS_RETURNED 185
    NULLTRACK_SUPPRESSED 27>
    If dense looping has happened then the rows_read is often orders of magnitude greater than rows_returned. You can see the looping strategy by running
    select value || ' : ' || details as loop from cube_operations_log where name = 'LOOP_OPTIMIZED'Here is an example of the output for a good (sparse) loop.
    LOOP
    ON : LOOP AGGMAP(PRICE_COST_CUBE_SOLVE_AGGMAP PRICE_COST_CUBE_PRT_TEMPLATE)Here is the output if I add a year to date calc to the cube.
    LOOP
    ON : LOOP UNION(AGGMAP(PRICE_COST_CUBE_SOLVE_AGGMAP PRICE_COST_CUBE_PRT_TEMPLATE
    ) AGGMAP(DENSE(TIME) PRICE_COST_CUBE_SOLVE_AGGMAP PRICE_COST_CUBE_PRT_TEMPLATE))Note that TIME is now looped densely, but the code is still trying to loop the other dimensions sparsely. Finally, here is the loop if I add a random olap dml calculation to the cube.
    LOOP
    DISABLED :There is now no optimized looping and the cube will be looped densely.
    So it may be worth checking the loop descriptor for your fast and slow cases, but my best guess at the moment is that the performance gap has something to do with your specific calculations. If I were you I would add them back one at a time to see if you can find a particular measure, or type of measure, that is causing the slowdown.

  • Trying to create a query that shows Sales Order/Invoice Totals as well as Paid/Outstanding/Available Down Payments

    Currently working on SAP B1 v8.82
    I'm looking to generate a query that will give an overall report for a given customer that shows Sales Order No, Invoice No, Sales Order Total, Invoice Total, Amount Paid on Invoice, Amount Remaining on Invoice, Down Payments Available, Open on Sales Order.
    I'm not sure what the best way to select the columns in bold above.  Invoice Total should be self-explanatory.  Amount Paid should be any down payments or applied payments on the invoice.  The balance due on the invoice (which seems to be T0.DocTotal if I'm not mistaken) should = 'Invoice Total' - 'Amount Paid on Invoice'. In the Down Payments Available column I want the total amount of money on the account or on down payments that aren't tied to a Sales Order.  If a client overpaid in the past for instance and there's a credit on their account, then it should contribute to this sum.  Open on Sales Order should be pretty easy.  I guess it's just the sum of everything that is still open on the Sales Order.  I'm just not sure what the best way to sum all the un-delivered freight, tax, and line items is.  Here's what my query looks like so far.
    SELECT DISTINCT T4.[DocNum] [Sales Order No],
    T0.DocNum [Invoice No],
    T4.DocTotal [Sales Order Total]
    T0.DocTotal [Amount Outstanding],
    FROM OINV T0
    INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN DLN1 T2 ON T1.BaseEntry = T2.DocEntry AND T1.BaseLine = T2.LineNum
    INNER JOIN RDR1 T3 ON T2.BaseEntry = T3.DocEntry AND T2.BaseLine = T3.LineNum
    INNER JOIN ORDR T4 ON T3.DocEntry = T4.DocEntry
    INNER JOIN OSLP T5 ON T4.SlpCode = T5.SlpCode
    WHERE T0.CardName Like '%%[%0]%%'
    GROUP BY T4.DocNum, T0.DocNum, T0.DocTotal, T4.DocTotal
    I tried doing a little searching around for queries similar to what I need, but I could find exactly what I was looking for and I'm very unfamiliar with OJDT, JDT1, and ITR1 tables which I think might be important to finding unapplied payments...

    Thanks.  There's a few problems though.
    1)  It seems that OINV DocTotal != Balance Due.  I'm seeing a number of invoices where there was a balance due, but we applied additional money (either we took another incoming payment and applied it or applied money from the account balance, etc.) and yet it still shows a total.
    2)  It's pulling incoming payments from different customers.  I think this is because the table was joined based on "RCT2 T4 on T4.[DocEntry]  =  T3.[DocNum] and T4.[InvoiceId] = T2.[LineNum]"  In one example I have 2 incoming payments 446 and 614.  Both have the DocEntry 542, but one relates to A/R Invoice 542 (for a different client) while the other relates to Down Payment Invoice 542.  *I was able to fix this by adding WHERE T5.CardCode = [%0]*
    3)  I'm going to work with this a little bit and see if I can alter it to make it work for me.  Basically this query falls a little short on the following:
    -  Doesn't include incoming payments that aren't linked to a down payment invoice.
    -  Does not give the Invoice Total (I'd like to know how much of the SO was invoiced.  DocTotal seems to give me Amount Invoiced - Down Payments.  I'm not sure the best way to get this number.  Maybe I could do the sum of each line * tax + freight)
    -  Does not give the outstanding amount on an invoice.  The ARtotal [DocTotal] column gives me how much was owed when the invoice was created, but it doesn't tell me what is currently owed.
    -  Lastly it may complicate the query too much and could be left off, but it would be nice to see if they have any money from credits or incoming payments that has not been applied.  Perhaps this would be easily accomplished by simply pulling in their account balance.

  • How to find that a sales order for which there is  delivery but no goods

    Hi
    How to find that a sales order for which there is  delivery but no goods issue has been done i.e we have an open delivery for a sales order.
    How in VBUK table can we find  out with the sales order no .
    Thanks in advance

    make use of table VBFA.
    Regards
    Peram

  • Creditreport that displays Sales Orders with Material Availability Date as

    Hi
    I need input if the following requirement can be met in FSCM credit mgmnt.
    Currently In FDK43 there is a total sales figure that represents the Sales that are consuming the Credit Limit assigned to the customer, unfortunately there is no drill down on this number to see which sales orders are responsible for the consumption of credit
    Do we have any sales report that displays Sales Orders with Material Availability Date as an output in conjunction with Credit limit .

    Not in standard provided. Custom program is required.
    Regards
    Hein

  • Transactions that reconcile sales between FI and CO

    Hi,
    Is there any transaction that reconcile sales between FI and CO?
    Thanks,
    Stanislas

    try...
    FAGLCOFIFLUP - Post CO Documents to FI
    KEAT
    KEAW

  • Material to be used in Sales promotion

    Hi
    How do Materials which are used in Sales promotion mapped in SAP
    Do we need to maintian material master etc ?
    Business requirement is related to pharma industry where a lot of material is distributed as free gifts ,
    How do we treat this material in SAP
    pls guide
    Thanks
    Anil

    hi
    yes material which are given as free goods needs to be assigned to Customers or Sales Organization.. Refer to the Links Below.. might get some needful info..
    http://www.sap-img.com/sap-sd/issue-free-goods-to-selected-customers.htm
    http://www.sap-img.com/materials/sap-mm-configuration-tips.htm
    http://www.sap-img.com/sap-mm.htm
    Reward If Useful
    Thanx & Regards
    Naren...

  • How do i create a specific location in a document, that my sales personal will be able to paste in a price offer made in another app (they are using acrobat reader) ?

    how do i create a specific location in a document, that my sales personal will be able to paste in a price offer made in another app (they are using acrobat reader) ?

    Hi gadi b,
    It sounds like you may want to create a form field in your PDF file, which your sales personnel can paste text into. You can use either Acrobat or Adobe FormsCentral to create PDF forms. For instructions, see FormsCentral Help | Create a form or Acrobat Help | Forms.
    Best,
    Sara

  • CC 2014 changes the location size dimensions that I input

    I believe this started after upgrading to Photoshop CC 2014. When trying to position an object on my canvas I'll input the X dimension that I want to use. Photoshop has been adding 0.5 pixel to any dimension that I input. If I go back to correct it, it re-adds the 0.5 pixel. So frustrating. I cannot find any setting that would account for this.
    Also, when scaling images, especially those that maintain the original image ratio, I'll input the desired width (say, 1024 px) and Photoshop will change the dimension to something close, but not exactly what I input, like 1023.67px. Keep in mind, this is not the dimension that should auto adjust because I've set it to keep the same proportions.
    Is anyone else having this problem? Any idea how to fix it, or is it a bug that Adobe needs to fix?
    Thanks

    Hi Chris,
    I'm not talking about document size, but the position of images, etc, that are in the layers. See screen shot below of my Photoshop tool bar (?) area:
    For example, I may have wanted this image layer to have an x-position of 151, which I entered here, but after I exit the layer the x-position changes to 151.5px.
    Any ideas?
    Tracy

  • Sales promotion Add On for Wholesales Industry

    Hi Expert,
    We had the following requirement from prospect:
    1. Example Buy 5(Item A) free 1(Item A)
    System to auto insert FOC item without marketing people to memorise the sales promotion.
    If buy 8, system will insert FOC item as 1 but if buy 10, FOC item will be 2.
    2. Flexibility in setting sales promotion
    Sometimes, the promotion could be buy 5(Item A) free 1(Item B)
    3. It must allow user to analyse sales promotion performances without setting up multiple sales promotion to reduce number of master records.
    4. It must allow for multiple unit of measurement as the FOC item could be item of lower unit of measurement eg buy 5 carton of Item A free 1 packet of Item B.
    5. Allow for validity date setting for this promotion.
    Wonder there is any workaround in 2007A or any available add on to cope with above requirement.
    Regards
    Thomas

    Thomas,
    Within the capabilities of the SAP Business One system (out of the box).  The only possibility to accomplish this without the  user manually entering would be set up a Sales BOM with the combination of (51) or (81) as the case may be.
    Suda

  • Error creating a sales promotion vb31

    Hi,
    When i try to create a sales promotion in VB31..I get a  error ....number range doesnt exist for rebate...can some one tell me where to assign number range to promotion in IMG.
    I create a promotionin img> SD> basic functions >pricing>pricing agreements-->define promotions.
    I read sales deals can be assigned to promotions...but where can i assign deals to promotion? in IMG? please throw some light on this.
    Thank You
    Challa

    Hi Challa,
    I think the required setting has not been done.
    Go to SPRO--> Sales and Distribution --> Basic Functions --> Pricing --> Pricing Agreements
    One more thing, Go to Google and search with term "SAP SD Sales Deal & promotion" --> The first result of slide share will help you to resolve your issue.
    Hope it helps,
    Regards,
    MT
    Edited by: M T on Apr 1, 2010 9:58 AM

Maybe you are looking for