Direct Connection ABAP Proxy and Java Proxy possible ????
Hi Folks ,
As i read as direct connection possible between 2 SAP systems only ..
and also i read as WS Direct Connection u2013 (Java) ..
What it means ?? is it ABAP Proxy to Java Proxy using Direct connection ?? Like Java Client Proxy and ABAP Server proxy
I am not clear on this.. Could you please explain or help me on this . ??
Siva..
Hi ,
+You can do both for java proxies as well Abap proxies.+
As per the following points
1. Point-to-point connection is a new capability available with SAP NW PI 7.1. It allows applications or systems to send messages using WS-RM without going through a middleware, e.g. PI, but still using a centralized tool to design and
configure the interfaces and connection properties.
2. SAP XI 3.0/PI 7.00 or higher releases can be licensed based on the total volume of messages in
gigabytes (GB) that is processed per month. The size of the payload is determined in the integration
server. The information is then aggregated according to sender and receiver system.
Question :
1. If Message exchange between 2 SAP applications using direct connection .. Then dont we need to consider about licencing cost for volume of messages per month ?
2. So if i use ABAP Client Proxy to Java Server proxy scenario.. can i use direct connection ? Eg., SAP ECC to java application ?
In both the cases PI Runtime is not required .. Am i right ?
Please clarify..
Siva..
Similar Messages
-
Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL
Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
AndrewThanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha -
Hi,
can anybody give me a clear idea regarding ABAP stack and Java Stack.
1. What is the concept of these both with respect to BI 7.0.
and explain with an example as i dont have any idea about these.
2. When these are used?
Thanks in advance,
Vijaya.Hi,
Pls check these threads discussing the diff:
https://www.sdn.sap.com/irj/sdn/thread?threadID=153727
https://www.sdn.sap.com/irj/sdn/thread?threadID=89916
Eddy
PS. Which type of SDN Ubergeek/BPX suit are <a href="https://weblogs.sdn.sap.com/pub/wlg/6555">you</a>?
Deadline: June 15th -
Unable to connect to CMC and Java Infoview
Hi
I am unable to connect to CMC and Java Infoview. When I am attempting to connect, then the following message is displayed.
"Oops! Internet Explorer could not connect to <web server>:<port number>"
Please give me some suggestions.
Thanks!Hi Stratos
I uninstalled the designer and repaired Crystal Reports Server. But it did not help.
The CMS is running now. But I cannot find all the other services and I am getting the same error when I try to open CMC or InfoView.
I found some of these errors in my system's event viewer:
NT Service message: NT Service Initialization Problem.
The root server reported an error Initialization Failure.
The source for both these errors is BusinessObjects_CMS.
Please suggest something
Thanks -
How to connect ABAP proxy to two different XIs
Hi, everyone.
I want to know there is a way to connect ECC to two different XIs using ABAP proxy.
As I know, it is much easier to make scenario with RFC or IDoc sender
but in our case we have to use ABAP proxy and must send to two XIs
So, according to the plant type in the record, data should be splitted to each XIs.
And I wonder I should use logical port for each XI.
Does anyone have a experience to implement this kind of scenario?
Then Pls show me the guide how to implement.
Very Urgent.
Thanks.Hi,
You cannot connect one ABAP proxy to two different XI systems at the same time.
The configuration held in transaction SLDAPICUST holds the XI system that is connected (as well as the SM59 details held will only point to one XI system at any one time)
Why would you want to send a message dependant on content to different XI systems ? Surely you would use conditional receiver determination in XI to route the message correctly.
Cheers
Colin. -
Errror in RFC connection between SCM ABAP stack and JAVA Stack
Hi All
we have installed SCM Abap stack and SCM java stack on same system within single database.when i create rfc connection AI_RUNTIME_JCOSERVER from SCM Java stack to SCM Abap Stack its working fine,but when i am configuring same from SCM Abap to SCM Java using SM59 its giving error.
Error Details Error when opening an RFC connection
Error Details ERROR: failed to open file G:\usr\sap\SCD\DVEBMGS00\data\sideinfo.DAT
Error Details LOCATION: SAP-Gateway on host OPS20SCD1.Octal.pet / sapgw00
Error Details CALL: fopen
Error Details COMPONENT: SAP-GW-LIB (ReadSideInfo)
Error Details COUNTER: 1854
Error Details ERROR NUMBER: 2
Error Details ERROR TEXT: ENOENT: No such file or directory OR: The system cannot find the fi*
Error Details MODULE: gwxxside.c
Error Details LINE: 274
Error Details RETURN CODE: 451
Error Details SUBRC: 0
Error Details RELEASE: 701
Is it compulsory to create RFC connection between abap and java installed on the same system.
plese suggest.
Regardsto configure acceptance of the ABAP (integrated ITS / WebGUI) saplogonticket on the java stack, just log into the java stack (http://FQDN:50xxx/nwa) and select configuration THe last item in the list is Trusted System... click.
on the ensuing page, click on the add trusted system button --> by querying trusted sytem.
Enter the required data on the page:
system type: ABAP
host name: FQDN
System Nr: your instance number
client (of the productive client)
and a username and pw with superuser priveliges in the system (SAP_ALL/SAP_NEW, etc).
the click next
On the final screen, click finish.
You have now SSO setup between the ABAP and Java stacks. To configure SSO to accept java saplogontickets on ABAP see:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b0310d6-0801-0010-3185-b2371a280372
This should resolve your question. -
PI Pipeline Doubt : Pipeline Steps in ABAP stack and JAVA stack
Hello
Can anyone please assist me with which stages steps of the PI Pipeline are executed on the Java or the ABAP stack.
Receiver Determination
Interface Determination
Message Split
Message Mapping
Technical routing
Call Adapter
Also can anyone please provide links relating to the PI architecture diagram describing it from ABAP and Java Stack Perspective and not from the Components perspective i.e. Integration Repository and Directory.
Thanks.
KiranHi
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Message, Java & XSLT (under Imported Archives) mappings are executed at Java stack;
ABAP & XSLT (in ABAP stack) mappings are executed at ABAP stack.
PI Architecture look threads
Architecture
/message/5802842#5802842 [original link is broken] -
Any problem if we areon ABAP SP12 and JAVA SP09 for PI 7.0
Hi All,
I was wondering being on different ABAP and Java SP's could cause any problems or compatibility issues in PI 7.0.
We are on SP12 for ABAP stack, SP09 for JAVA stack.
We are getting the following error (Red LED: Test Returned an Error) in Self-Test Status for BPE (RTW --> Component Monitoring --> Display --> Business Process Engine):
Details for 'Schedule Background Job for Packaging'
Background job for packaging is not required
Details for 'Schedule Background Job for Reorganization'
Background job for packaging is not required
In details it says background is not required and it gives Red LED in test.
Please let us know if anyone has any idea about the above two issues.
Thank You,
Indrasena JangaHi,
>>BPE (RTW --> Component Monitoring --> Display --> Business Process Engine):
To my knowledge different patch levels on ABAP and java stack will not cause this issue.
More over there will not be much issue when we use different patch levels on ABAP and java stack
Regards
Agasthuri Doss -
Direct connect macbook air and time machine
Any idea how to direct connect my macbook air with my time machine?
I am wanting to do a large restore from my old mb to my new air. This would take 18+hours over my network.
Few tidbits: my time machine isn't the newest version so it doesn't have a thunderbolt port. One usb and several ethernets.Complete an Time Machine backup of ypur old machine to an external USB hard disk
If the Air is "brand new", you are in luck. Use Setup Asistant on the very first Boot. Upon that boot, the system will aks if you would like to transfer files, applications and settings from another computer. You would then attach your USB disk, the Time Machine Backup, and direct the sytem to import all the information from the TM backup.
Here is everything you need to know, and more. -
ABAP STACK and JAVA STACK certificates
Hi Fiends,
I have requirement in which I want to use HTTP adapter to send message and apply security certificate. I got from sdn that if I wan to use http adapter with certificate than I have to install certificates in ABAP stack.
My problem is I had one scenario in which I am using BC adapter to send message with security certificate and for that I had applied certificates in java stack and its working properly.
My question is,
Is it possible to use Java Stack and ABAP STACK together..?
I mean is it possible to implement both of the above scenario in same xi system?Hi Soni,
You cannot use the same certifcates wihch you installed in Java stack with abap stack. You need to install separealy on teh abap stack.
For HTTP communication you dont need to install certificates. You only need when you want to use HTTPS communication. So if you want to use HTTPS communication and want to use SOAP adapter then you can use ther certifcates which is already installed on java stack. But if you want to use HTTP adapter then you need to install in ABAP stack.
Please see this hlep on how to install on the java stack and the process behind it:
http://www.i-barile.it/SDN/EnablingSSL&ClientCertificatesOnTheSAPJ2EEEngine.pdf
Also check this help:
http://help.sap.com/saphelp_nw04/helpdata/de/14/ef2940cbf2195de10000000a1550b0/content.htm
on abap stack check seshus response:
HTTPS enabling
Regards,
---Satish -
Message Mapping ... ABAP ,XSLT and JAVA
HI Friends
I have a general question ... but it will confuse me a lot ....
my question is we have four types of message mappings
1) GUI ( and UDFs)
2) ABAP
3)XSLT
4) JAVA
when we have plenty of options in GUI (and User defined functions also) to define sender 2 receiver message mapping
then what is need of JAVA,ABAP and XSLT Message Mapping and when we use these message mappings( exactly in which situation) and difference b/w them
Thanks in Advance
MaheshGreen = recommended
Yellow = Acceptable
Red = not recommended
In my experience.
XSLT mapping: is confotable to convert to another format different to xml(when we do not have a complex logic)
Java Mapping: is to implement complex logics(but the maintainbilityis not good...you need a external tool)
ABAP mapping: I think is the best option when the you have the skills on that technology but take account that is not portable neither good for usability.
Regards
Ivan -
When do we go for ABAP mapping and Java mapping
Hi friends,
At present I am working on graphical mapping in XI ,can you guys give me with an example or scenario when do we use ABAP mapping , Java mapping or XSLT mapping.
Thanks in advance
Sud<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums</a>
I have standard XSLT mapping programs available for my scenarios, so use XSLT mapping. Similarly with Java mapping, For most scenarios, message mapping does the job too well. Abap mapping similarly is used to leverge existing ABAP base. If message mapping becomes confusing and hard to follow with too many functions, I go for Java mapping (just my way). I havent used ABAP mapping thus far.
Discussing ABAP mapping
ABAP mapping is developed in ABAP work bench. ABAP mapping needs to be transported to integration server and XI does not support this transport and have to do with ABAP transports.
Customers who can develop mapping program on SAP web AS and can transport them there can use ABAP mapping
*ABAP mapping programs cannot access the value table
*Since ABAP mappings are executed on ABAP stack SAP does not provide any ABAP mapping programs
*ABAP mapping programs must exists with one single version in IS, unlike JAva and XSLT mapping that can have multiple versions of mapping program
Regards,
Priya
priya k
null -
Where to see the abap stack and java stack.
Hi..
I have installed ECC6.0 ABAP+JAVA engine.
I would like to know the stack level of my system. for this how i have to check. If so please mention the path how to check, Is there any R/3 level command or O/s level command to check these stack status.
Previously TCODE SPAM is used to see the Support Pack level of ABAP or Basis or any other OCS packages.
I would like to know the difference of the stack level and the support pack.
Regards,
Bhaskar
Edited by: bhaskar1818 on Feb 22, 2010 11:17 PMYou can also check Java Stack info @ the file system level at:
/usr/sap/<instance>/j2ee/cluster/dispather or server<n> and check version.txt
Cluster-Version: 7.00 PatchLevel 56084.450
Build-On:Tuesday, March 10, 2009 10:37 GMT
Perforce-Server:
Project-Dir:JKernel/NW04S_14_REL
JKernel Change-List:56084
Build machine:SAPInternal
Build java version:1.3.1_18-b01 Sun Microsystems Inc.
SP-Number: 14
Shows that its 7.00/SP14.
Hope it helps.
REgards,
Snehal -
Can we built connection between flash and JAVA?
Hello i m a flash developer. I need a solution to improt java class in flash.
Is there any solution to connect java and flash. Plz reply ASAP.Hi,
I have created a java class in EJB now want to import
it in Flash and want to use the object of the class.
Can u give me any program to do this?Huh?
What do you mean?
Why do you want to import an EJB into your Flash app?
It's impossible to do such a thing you know.
Also EJBs are not meant to execute on any client end.
Those are server end beasts.
From the Flash application you should call remotely the EJB through a servlet.
Please read: [url http://www.onjava.com/pub/a/onjava/2003/02/26/flash_remoting.html?page=1]Flash Remoting for J2EE Developers.
Regards -
Hello
Folks
I have business requirement as below.
X is a FMCG (Fast moving consumer Good) company. Need to take the financial transaction from customers per day 1 Million.
When X company takes an electronic cash (Credit card). It need to communicate with X1 (Bank with legacy system).
My question:
Ideally what kind of mapping makes my Integration process an error free. Say less monitoring work. Less support.
Basically I am looking for a RUGGED mapping process.
Thanks in advance for your answer and co-operation
Regards
Ashok BabuHi Babu,
<b>Ideally what kind of mapping makes my Integration process an error free. Say less monitoring work. Less support.</b>
Thats depends upon ur requirement.Best is to use Graphical mapping as it is easy to use and not that much complex compare to other mappings.But some in some complex scenario..JAVA/XSLT maaping is useful....
Check here the mapping performance...
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points
Maybe you are looking for
-
Out of the box NT CWS erroring out in 5.0.2
Don't know if this is the correct disscussion board to post this(I have posted this on deployment area as well). However, please help if anyone has come across this error and has resolved it. <TD noWraplign=right><a href="http://portal.plumtree.com/p
-
SSI Button in CS6 12.1?
Greetings, After all the changes in 12.1 and the complete reset of the UI. I see the SSI button has been removed from the common toolbar. (I hate the monochromatic buttons - you can barely see them or differentiate on a large monitor. Just my 2 cents
-
I get a classNotFound in my ejb session class when calling web application class. The following is my structures: +harvester.ear ---ejb.harvester.jar --------Session.class --------Object.class --------Home.class --------Manifest.mf **** --------ejb-j
-
MSCRM 2011- Activity associated view on account
Hi All, I have changed the default setting of 'filter on' to ' All' in open activity associated view in account. But now I also want to change the default in 'Include' to 'This record only' using Javascript. Normally, default value of 'Inclue' is 'Re
-
The only way I can play the song is by opening it out of the playlist. How can that be? I thought playlists were composed of "shortcuts" to the Music Library. So, by definition, anything in a playlist had to be in the library. ???????