DirSync error after re-configure
Had an odd issue where our DirSync stopped working and we received an unhealthy sync e-mail. I couldn't determine what went wrong, so I ran through the configuration tool and specified the same creds for sync'ing and then synchronization resumed.
Since then, there is one object that was previously sync'd that now reports it can't sync because another object with the same SMTP address exists.
However, I have logged into EOP and deleted the object and tried re-syncing to no avail. I have also created a query in our local Active Directory to search for either of the SMTP addresses to confirm that it is not affiliated with another object.
Again, the odd part is that this very object was synchronized without issue prior to having to reconfigure the DirSync tool. Please see the following error:
Unable to update this
object because the following attributes associated with this object have values
that may already be associated with another object in your local directory
services: [Mail [email protected];].
Correct or remove the duplicate values in your local directory.
Did you login using the presentation services link available via the Oracle Business Intelligence menu from Start in Windows?
Subject Area change should only impact the reports using the respective Subject Areas.
This maybe a problem related to a particular report in dashboard if you have dashboards set up already
Or else Login to http://Serverdetails/analytics/saw.dll?Answers
login directly to Answers and open the impacted resports the reports using modify view/criteria
Click on Advanced Tab and Set the subject area correctly in Request XML? This may solve it.
Similar Messages
-
Configuration Frozen Error after migrating to Weblogic 11g console extensio
We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 moreAfter more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica -
Error while indexing after Trex Configuration
Hi ,
After TREX configuration , only my .txt files are getting indexed ..
all other extension files like .doc, .pdf are getting failed at the preprocessing stage
can somebody explain thishi
this problem is with host name missing
Try these
Logon to portal as administrator
Navigate to System Administration -> System Configuration -> Knowledge management -> Content Management -> Global Service -> Show Advanced option -> URL Generator Service
Then check the Host name.
It should be according to your portal
For example if your portal URL is http://GHIKD.sde.rfd:53200/irj/portal then you need to give host name like http://GHIKD:53200.
If still your problem is existing, please feel free to ask.
Regards
Krishna. -
Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard
am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu -
Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
"Creating Open Directory master"
), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
KimHad the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0 -
Error in importing Configuration objects of PI 7.0 to PI 7.1
Hi All,
My server is upgraded from PI 7.0 to PI 7.1.
I am getting Error while importing Configuration objects of PI 7.0 to PI 7.1 now.
Pls see the below error
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
Pls suggestHi,
It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
3. After that in ID, Environment ---> Clear SLD Data Cache
4. Now you can try to import configuration objects...
Regards,
Sarvesh -
Error: System not configured as Integration Engine
Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar AgarwalHi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
<b>bs</b>=<SENDERSERVICE> parameter in your URL.
<b>bs</b> is replaced by <b>service</b> in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani -
Error in enabler configuration:1003
Hi,
I have deployed a java application on Sun Application Server 7. I have registered it as an Partner Application in Portal(ver 10g-904).
The application logs in to OID.
When I click on login it throws error:
javax.servlet.ServletException: oracle.security.sso.enabler.SSOConfigException: Error in enabler configuration: 1003
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:471)
But after that if I refresh the page,it takes me to the correct page.
The same application deployed on websphere is working fine.
If any one can suggest what the problem can be, that will be great.
Thanks,
subhasishHi Teri!
Did you find any solution for this issue? I´m having the same problem in my environment.
Thanks in advance!
Evandro -
Oracle R12 Installation Error - Validate System Configuration
Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir -
Could someone throw some light on this kinda error after F110 Payment run .The error says IDoc type could not be determined for the IDoc
Should I check anything in House Bank Determination.? Please help me resolve this.
Thanks
GHi Murali,
I need to Create IDOC as soon as F110 transaction is run.
In FI12 i have done Partner Profile configuration, and in WE20 i have created the Partner Profile sith PEYEXT-->PEXR2002.
But i couldn't see any IDOC created?
Please give me your answer / process on this
It is very urgent
Thanks
Manju -
Application is throwing NSAPI and other errors after the migration
We started seeing NSAPI and other errors after the migration of new codes and recently make some changes
1) During the migration, all the 4 WLS cluster instances were bounced simultaneously. What is the best practice and recommendation from BEA Oracle? Do we need to bounce it one by one for any specific reason?
2) we recently introduced the 4th weblogic cluster instance on Solaris 10 zone. All other WLS instances are running on Solaris 8.
Is it okay to have two different OS versions( Solaris 8 and Solaris 10) and different hardware to host WLS cluster instances? Does BEA Oracle support this kind of configuration?
3) We are consistently seeing below errors in the iplanet web server error logs even though site is working fine
[11/Sep/2009:08:53:50] failure ( 4453): for host XX.XX.XX.XX trying to POST /servlet/FSO, wl-proxy reports: exception occurred for backend host 'YY.YY.YY.YY/23120/0': 'CONNECTION_REFUSED [os error=0, line 1732 of URL.cpp]: Error connecting to host YY.YY.YY.YY.YY:23120'
Do we need to upgrade our WLS proxy plugin? . Current version of WLS proxy plug-in is libproxy_61.so. Our Weblogic version is WLS 92 MP2
I'll really appreciate if some can anwsers those questionsOK booted in to Virtualbox, seems too be working fine this way, maybe it is the ATi drivers
any Help would be appreciated -
There was an error after each try of posting new message. Sory for multi copies.
There was an error after each try of posting new message. Sory for multi copies of question about InterMedia configuration.
There was an error after each try of posting new message. Sory for multi copies of question about InterMedia configuration.
-
ID, IR error when try to login (JNDI error) during SSL configuration
I'm in the process to configure SSL on SAP J2EE Engine. I'm following the document of SAP library and "Enabling SSL and client certificates on SAP J2EE Engine" by Angel Dichev of RIG, SAP Labs.
I deployed the SAP Java Cryptographic Toolkit and update the unlimited strength jurisdiction policy files.
As per document, I changed the default setting from SSL provider service for the Dispatcher from manual start to always start.
After this step, I have problems to log in IR and ID ( SLD and RWB are working), getting the follow errors ( after click on ID or IR, got the login screen for user/pwd and after entering getting the error):
"Unable to map from JNDI delivered class com.sap.engine.services.jndi.persistent.UnsatisfiedReferenceImpl to class com.sap.aii.ib.sbeans.login.LoginServiceHome registered during login service"
Any solution of this problem?
Regards
AmarThanks Ravi
I created the certificate and then it work for one day. Today morning, i received the certificate request response from SAP trust centre and imported into our server.
I have inported into Key storage of visual admin as per guide. Is there any other place to check it?
Again logon to IB fail with the same error.
Any idea?
Regards
Amar -
BO6.5 ORB error after moving server to new location
Post Author: seetr
CA Forum: Older Products
Our server was forklifted to a new location within our network, so the IP address changed but everything else remains the same. Now we are unable to restart the BO server. We found a location in the Configuration Tools > ORB setting where the IP was hardcoded. We were able to change the IP after stopping all BO services running on the server, but we could not complete the setting change as we keep getting the following error - "Configuration script cannot be started (Error: CFT 06002)". Any ideas? Thanks!Hi,
What steps did you perform in the Configuration Tools to update the IP address? Can you provide details?
You may have to Update the ORB or completely recreate it.
Note that if you recreate the ORB, you need to backup your Storage folder.
But before proceeding with the above, please check the following note:
1182500 - Error: "Configuration script cannot be started(Error: CFT 06002)" when customer trying to update the ORB
Symptom
When trying to update the ORB the following error message appears: "Configuration script cannot be started(Error: CFT 06002)" You are then unable to ping the IP address for a server name.
Cause
The "C:/Winnt" or "Windows/System32" value is missing for the System variable PATH.
Resolution
Perform the following steps:
- Add C:/Winnt or Windows/System32 to the System variable PATH.
- Reboot the server.
- Update the ORB.
Hope this help.
Regards,
Jeff -
Firefox sync error server incorrectly configured
The very first time I loaded firefox on my laptop (which i bought only a couple months ago) the syncing worked just fine.
After i dont know how much time i started getting errors that the syncing was failing. I tried to reconfigure the syncing properties but started getting the error server incorrectly configured. I scoured the net looking for answers following all the troubleshooting that I could find.
One thing I notice is that when i choose I have an account it is supposed to load a key that i can use on my already synced devices but that never actually populates and it immediately kicks me to the user name password and sync key screen. This issue remained throughout the duration of all the troubleshooting below. Additionally I cant even create a new sync account on that pc as it fails everytime.
I have done the following in a effort to resolve this issue.
I created a new sync account using one of my other pcs
I added a pc that was never on the sync account to it to verify it does it fact sync
i uninstalled firefox 4 separate times deleting all the folders and even as far as the registry keys
i tried using a lan connection vs wifi
i updated windows
My computer;
I have a lenovo ideapad with windows 7 and 8 gigs of ram with a amd processor
My LOG:
1308530082634 Service.Main INFO Loading Weave 1.7b1pre
1308530082645 Engine.Bookmarks DEBUG Engine initialized
1308530082646 Engine.Forms DEBUG Engine initialized
1308530082646 Engine.History DEBUG Engine initialized
1308530082647 Engine.Passwords DEBUG Engine initialized
1308530082647 Engine.Prefs DEBUG Engine initialized
1308530082647 Engine.Tabs DEBUG Engine initialized
1308530082648 Engine.Tabs DEBUG Resetting tabs last sync time
1308530082648 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
1308530082651 SyncKeyBundle INFO SyncKeyBundle being created for
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
1308530086187 Service.JPAKEClient DEBUG Aborting...
1308530123488 Service.Main INFO Logging in user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530123489 Service.Main DEBUG Finding cluster for user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530125046 Net.Resource DEBUG GET cached: 0
1308530125047 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530126636 Net.Resource DEBUG GET cached: 0
1308530126636 Service.Main DEBUG cluster value = https://phx-sync061.services.mozilla.com/
1308530126637 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync061.services.mozilla.com/1.0/mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3/
1308530128303 Net.Resource DEBUG GET cached: 0
1308530128303 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530129607 Net.Resource DEBUG GET cached: 0
1308530129642 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1308530132819 Service.Main INFO Service reset.
1308530132820 Engine.Clients DEBUG Resetting clients last sync time
1308530132820 Engine.Bookmarks DEBUG Resetting bookmarks last sync time
1308530132821 Engine.Forms DEBUG Resetting forms last sync time
1308530132822 Engine.History DEBUG Resetting history last sync time
1308530132823 Engine.Passwords DEBUG Resetting passwords last sync time
1308530132825 Engine.Prefs DEBUG Resetting prefs last sync time
1308530132825 Engine.Tabs DEBUG Resetting tabs last sync time
1308530132826 CollectionKeys INFO Clearing CollectionKeys...
the couple of lines that stand out to me are
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
appears it is trying to check some cache or something and cant find it so it just gives up....
please help I have spent countless hours trying to fix this.One addition note: in my own situation, I checked my about:config and saw my sync server's URL (https://scl2-sync42.services.mozilla.com/ ). I entered it into my address bar and got the following message:
"server issue: database is not healthy"
(quotes were included) I've seen no mention of such a phrase in a Google search, so I assume that no one else has reported any such thing.
Going into my about:config, I deleted the URL and it synced just fine!
Maybe you are looking for
-
Photoshop elements does not seem to work with Windows 8. What photoshop will work?
I just bought a computer with windows 8 and tried to install photoshop but it messes up some of my other programs. What photoshop will will work with Windows 8.
-
I am trying to do bdc for ac02, using session method, data is updating in bdcdata table, its not getting into the database, PERFORM : fill_bdc_data USING 'SAPLBAS0' '0300' 'X' ' ' ' ', fill_bdc_data USING '' '' '' 'BDC_OKCODE' '=NEW', fi
-
I am calling a function from a SELECT statement. I want to call this function 3 times in the same select statement, to get 3 different levels in a hierarchy for a particular licence number. This function has a hierarchy query using a START WITH.. CON
-
A question about output result
i want to print the query result of a database table into the screen. but i found it difficult to align the results. listed below is an example Mary F 28 Alexandra M 30 i usd the listed command to print above results: System.out.println("\t" + name +
-
Can't open Recommended action link in Travel&Expenses ESS 600 SP7
Hello, We're using SAP EP7 Stack 7, ESS 600 SP7 and when we try to access any Recommended action link in Travel&Expenses/My Trips and Expenses/All my Trips we get the following error: Portal Runtime Error An exception occurred while processing a requ