Disable logging of "show running-config" on MDS 9124
After our MDS 9124 was upgraded from 3.1 to 4.2, it now logs in the config whenever a "show running-config" is done. This has somewhat become an issue because we use Cat Tools to backup our configs so when it logs in, it does a "show running-config" which then triggers the config to be updated which Cat Tools sees as a change and backs up the config everyday because of this. Very annoying.
Anyway to disable this? Here is what the lines look like in the config:
!Command: show running-config
!Time: Mon Jan 4 07:04:03 2010
I was not able to find a way to disable and I couldn't find anything in CatTools (our version is a couple years old) to exclude checking certain lines. So for now the configs get backed up everyday. I'll probably update CatTools and contact Solarwinds to see if there is a way to customize the backup script.
Similar Messages
-
Create user just use for show running-config
Dear Cisco support team,
I want to create a user account on ASA 5520, which just has one function: show running-config.
How to modify privilege, and set this privilege just excute this command: show running-config.
Can you help me ?
Thank you.
Dang Nguyen,
Viettel Cambodia Company.If the chassis is loaded with line cards, why then CPU utilization for five seconds: 11%/1%; one minute: 9%; five minutes: 9%?
The configuration of each line cards are stored in each line cards. There maybe a 40 Gbps backplane line but some commands have "low priority" communicating between the different line cards and up to the supervisor card.
You'll see similar sort of behaviour too when you stack seven to nine 3750/G/E/X switches together. -
has anyone seen this on their dot1x configurations where the vlan info is missing on the show running-config? see port fast 2/0/3 below. the 3750 POE switch is running 12.2.55-SE7.
interface FastEthernet2/0/1
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/2
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/3
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/4
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/5
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/6
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enableThe vlan info isn't missing, you have the option of either specifying which VLAN you want it dropped in to, or you can just say authorize the vlan that is configured with the 'switchport access vlan' command.
-
How to backup a "show tech" and a "running config" from MDS switches
hi, guys
I am a newbie of MDS switches.
but I got a request this week asking me to actively backup a "show tech" and a "running config" from the MDS switches........
so my questions are:
1) if I want to back up MDS configurations, which commnds should I run? or just "show tech" is enough?
2) is the MDS itself have the backup function? for example can ftp the configuration to someplace?
please help point me the right direction or is there any official referece docs I can refer to ?
thanks in advance!!!tftp worked for me but not ftp. My ftp requires a password and I don't know how to send it via scheduler job.
Worked:
scheduler job name BkupConfig
copy running-config startup-config
copy startup-config tftp://10.1.1.1/MDS_Bkup/DowMDS$(TIMESTAMP).txt
scheduler schedule name Weekly_5am
job name BkupConfig
time weekly 01:05:00
FAILED FTP:
Job Name : test Job Status: Success (0)
Schedule Name : test User Name : user
Completion time: Thu Sep 5 11:08:41 2013
--------------------------------- Job Output ---------------------------------
`copy running-config startup-config`
[### ] 6%
[###### ] 12%
[######## ] 19%
[########### ] 25%
[############## ] 32%
[################ ] 39%
[################### ] 45%
[###################### ] 51%
[######################## ] 59%
[########################### ] 65%
[############################# ] 71%
[################################ ] 79%
[################################### ] 85%
[##################################### ] 91%
[########################################] 98%
[########################################] 100%
Copy complete, now saving to disk (please wait)...
`copy startup-config
ftp://[email protected]/MDS_Bkup/DowMDS2013-09-05-10.53.05.txt
`
Password: Login failed. -
Netconf equivalent for "show running-config" in IOS XR
Hello,
I have an ASR9K router, on which I want to get full running configurration in XML format.
To start netconf prompt, I go with
netconf echo format
And then I send the following request:
<?xml version="1.0" encoding="UTF-8"?><rpc message-id="106" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"> <get-config> <source> <running/> </source> <filter> <Configuration/> </filter> </get-config></rpc> ]]>]]>
In the output, it is seen that it is trimmed after start of ISIS configuration. In addition, there is an error message:
<error-message xml:lang="en"> 'XMLMDA' detected the 'warning' condition 'An XML request provided too little or too much values for a class' </error-message> <error-info> <Configuration ErrorCode="0x4368a200" ErrorMsg="'XMLMDA' detected the 'warning' condition 'An XML request provided too little or too much values for a class'">
Is there a way to get the whole content of the configuration (preferable, in one message), like it is done in IOS with "no netconf max-message"?
-Alex.Hi Peter,
'show run vrf xxxx' will just give the configuration under 'vrf xxxx', one creative way to get what you are looking for is to use 'show run formal | i vrf xxxx'.
There are some other ways, but this is the easiest.
HTH,
Sam -
Privilege command: the show run does not show the running-config
Hi,
Whenever I login using "user1" I can successfully authenticate however when I ussue the show run for user1. The only thing that I can see are the following:
R4#show run
Building configuration...
Current configuration : 13 bytes
end
R4#
I have put the command on the router as follows:
~~~~~~~~~~~~~~~~~~~~~
aaa new-model
aaa authentication login ACS group tacacs+ local
aaa authentication login NO-AUTH none
aaa authorization exec ACS group tacacs+ local
aaa authorization exec NO-AUTH none
aaa authorization commands 1 ACS-1 group tacacs+ local
aaa authorization commands 1 NO-AUTH none
aaa authorization commands 10 ACS-10 group tacacs+ local
aaa authorization commands 10 NO-AUTH none
aaa authorization commands 15 ACS-15 group tacacs+ local
aaa authorization commands 15 NO-AUTH none
username user2 privilege 15 password xxx
username user1 privilege 10 password xxx
tacacs-server host 10.50.31.6
tacacs-server directed-request
tacacs-server key xxx
privilege exec level 15 show
privilege exec level 10 show running-config
line con 0
exec-timeout 1000 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line aux 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line vty 0 4
authorization commands 1 ACS-1
authorization commands 10 ACS-10
authorization commands 15 ACS-15
authorization exec ACS
login authentication ACS
end
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Regards,
LorenzLorenz
I believe that the answer is that in implementing privilege levels Cisco designed the show run command so that if you do not have capability to change something that it will not show up in the show run. I believe the logic is that from a security standpoint if you are not authorized to change it you should not be able to see it in the config. So in your case if user1 is not able to change anything then they will not be able to see anything in show run.
HTH
Rick -
Router Crashes after entering "show run" or similar commands
Hello,
Im having a problem with my Company router C3845-ADVSECURITYK9-M, software Version 15.1(4)M. After i issue "show run" it tends to crash in middle of output, router restarts itself to be precise....same thing happened when i tried "show stack" afterwards, it happened several times when trying to show running config, so im guessing it has some problem when trying to display large outputs...i have never heard of such thing though so im asking for advice,
These are some informations i gathered:
show version:....
System returned to ROM by error - a Software forced crash, PC 0x60AD4710 at 14:10:56 CET-SUM Wed Aug 13 2014
xxxx#sh env
SYS PS1 is present.
Fan status: Normal
Input Voltage status: Normal
DC Output Voltage status: Normal
Type: AC
Thermal status: Normal
SYS PS2 is absent.
AUX(-48V) PS1 is absent.
AUX(-48V) PS2 is absent.
Fan 1 OK
Fan 2 OK
Fan 3 OK
Fan Speed Setting: Normal
Alert settings:
Intake temperature warning: Enabled, Threshold: 55
Core temperature warning: Enabled, Threshold: 70 (CPU: 90)
Board Temperature: Normal
Internal-ambient temperature = 38, Normal
CPU temperature = 50, Normal
Intake temperature = 32, Normal
Backplane temperature = 29, Normal
Voltage 1(3300) is Normal, Current voltage = 3284 mV
Voltage 2(5150) is Normal, Current voltage = 5153 mV
Voltage 3(2500) is Normal, Current voltage = 2525 mV
Voltage 4(1200) is Normal, Current voltage = 1203 mV
xxxx#sh logg
Syslog logging: enabled (0 messages dropped, 120 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 62 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 178 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 181 message lines logged
Logging to 10.254.0.49 (udp port 514, audit disabled,
link up),
181 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Logging to 10.254.8.44 (udp port 514, audit disabled,
link up),
181 message lines logged,
0 message lines rate-limited,
0 message lines dropped-by-MD,
xml disabled, sequence number disabled
filtering disabled
Log Buffer (1000000 bytes):
*Aug 13 12:33:24.867: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Aug 13 12:33:24.871: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 12:33:25.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface Onboard VPN, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 13:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 12:33:29 UTC Wed Aug 13 2014 to 13:33:29 MET Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 13:33:29 MET Wed Aug 13 2014 to 14:33:29 CET-SUM Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to down
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:1, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:2, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:3, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:4, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:5, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:6, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:7, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:8, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:9, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:10, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:11, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:12, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:13, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:16, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:17, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:18, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:19, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:20, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:21, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:22, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:23, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:24, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:25, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:26, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:27, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:28, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:29, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:30, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:15, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:0, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:1, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:2, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:3, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:4, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:5, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:6, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:7, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:8, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:9, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:10, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:11, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:12, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:13, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:14, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:16, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:17, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:18, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:19, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:20, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:21, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:22, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:23, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:24, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:25, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:26, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:27, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:28, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:29, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:30, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:15, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:0, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:1, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:2, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:3, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:4, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:5, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:6, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:7, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:8, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:9, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:10, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:11, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:12, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:13, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:14, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:16, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:17, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:18, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:19, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:20, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:21, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:22, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:23, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:24, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:25, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:26, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:27, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:28, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:29, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:30, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:15, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:1, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:2, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:3, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:4, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:5, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:6, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:7, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:8, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:9, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:10, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:11, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:12, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:13, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:14, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:16, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:17, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:18, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:19, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:20, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:21, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:22, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:23, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:24, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:25, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:26, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:27, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:28, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:29, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:30, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:15, changed state to down
*Aug 13 14:33:30.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Aug 13 14:33:31.535: %LINK-3-UPDOWN: Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:31.795: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 14:33:31.999: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 14:33:32.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:32.799: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Aug 13 14:33:32.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Aug 13 14:33:34.811: %QOS_CLI_DEPRECATE-4-MAX_RESERVED_BW: max-reserved-bandwidth on interface has been deprecated. For further information, please consult Product Bulletin 580832, Legacy QoS CLI Commands Deprecation
*Aug 13 14:33:34.815: Interface Serial0/1/0:1 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINK-5-CHANGED: Interface Serial0/1/0:1, changed state to administratively down
*Aug 13 14:33:37.419: %LINK-5-CHANGED: Interface Dialer1, changed state to administratively down
*Aug 13 14:33:38.055: %SYS-5-CONFIG_I: Configured from memory by console
*Aug 13 14:33:38.491: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 3800 Software (C3845-ADVSECURITYK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 17:29 by prod_rel_team
*Aug 13 14:33:38.495: %SNMP-5-COLDSTART: SNMP agent on host xxxx is undergoing a cold start
*Aug 13 14:33:38.519: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Aug 13 14:33:38.699: %SYS-6-BOOTTIME: Time taken to reboot after reload = 158 seconds
*Aug 13 14:33:38.859: %CONTROLLER-5-UPDOWN: Controller E1 0/0/0, changed state to up
*Aug 13 14:33:38.867: %CONTROLLER-5-UPDOWN: Controller E1 0/0/1, changed state to up
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON
*Aug 13 14:33:38.896: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.0.49 port 514 started - CLI initiated
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.8.44 port 514 started - CLI initiated
*Aug 13 14:33:40.860: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed state to up
*Aug 13 14:33:40.868: %LINK-3-UPDOWN: Interface Serial0/0/1:15, changed state to up
*Aug 13 14:33:40.884: %LINK-3-UPDOWN: Interface Serial1/0:15, changed state to up
*Aug 13 14:33:41.684: %CSM-5-PRI: add PRI at 0/0/1:15 (index 0)
*Aug 13 14:33:41.688: %CSM-5-PRI: add PRI at 0/0/0:15 (index 1)
*Aug 13 14:33:51.648: %CSM-5-PRI: add PRI at 1/0:15 (index 2)
*Aug 13 14:34:14.956: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 0 state Standby -> Active
*Aug 13 14:34:15.164: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 2 state Standby -> Active
*Aug 13 14:34:15.484: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 3 state Standby -> Active
*Aug 13 14:34:21.600: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.85.212 on GigabitEthernet0/1.86 from LOADING to FULL, Loading Done
*Aug 13 14:34:27.728: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 4 state Standby -> Active
*Aug 13 14:20:02.780: %SYS-5-PRIV_AUTH_FAIL: Authentication to privilege level 15 failed by xxxx on vty0 (xxxx)
*Aug 13 14:21:50.405: %SYS-5-CONFIG_I: Configured from console by av-vilenko on vty0 (xxxx)i made some changes, but nothing that would or could cause this. And besides according to my collegues its not a recent problem (before i joined the company), it goes back at least a year or more...but ofc. since router is working fine untill you try to show the config noone bothered to resolve the issue they just kept their hands off it -.-
-
Sh running-config takes forever ACE A3(2.6)
Hi all,
When I do show running-config on the primary ACE unit, it either takes several minutes, or forever.
Generating configuration.... (and stays there)
Show startup returns immediately. show running-config on the secondary unit (hot standby) returns immediately
Any ideas?
thanks,
georgelogging enable
logging timestamp
logging trap 5
logging console 6
logging history 6
logging buffered 6
logging persistent 6
logging monitor 6
logging facility 7
logging queue 1638
that was the configuration of the logging.
Anyway, I upgraded to A4.2.0 and I don't see the problem now. -
Issues with tftp and running config backups.
I just recently setup Solar Winds tftp and am using the following commands below to backup my running config to tftp. They do upload to the tftp but every day as a new config is written it's in a numbered seq. (ie-3900-switch backup 1, 3900-switch backup 2, 3900-switch backup 3, etc). I've checked all the settings on the tftp, and they all look correct. Is there something I'm missing??? I would like the daily backup to overwrite the previous one.
Thanks in advance!
archive
log config
logging enable
logging size 200
notify syslog contenttype plaintext
hidekeys
path tftp://DEVICE-IP//DEVICE-HOST-NAME
time-period 1440Hi,
as a workaround you coul use kron instead of the archive feature.
Here's an example
kron occurrence backup at 00:00 sun recurring
policy-list backup
kron policy-list backup
wr
show running-config | redirect tftp:///
Regards
Alain
Don't forget to rate helpful posts. -
AAA authorization show run in priv 7
Hi,Any one can help...
I have set up AAA on my network.
aaa authentication login default group tacacs+ group security local
aaa authorization exec default group tacacs+ group security local
aaa accounting exec default start-stop group tacacs+ group security
tacacs-server host x.x.x.x
tacacs-server directed-request
tacacs-server key 7 xyz
I want set prvilige on group basis.
I have created a group called test in ACS server and set comnand authorization on pergroup basis
& added show command with permit running-config as arguments.
My objective is give the user of test group priv level 7 but they can use show running-config.
Any help?
thanks in advanceHi,
Thanks for your reply.It's nearly the exact what I wanted.However show running-config only shows like these
7206a#sh run
Building configuration...
Current configuration : 53 bytes
boot-start-marker
boot-end-marker
end
However #Show config
shows the proper running-config
Thanks -
dear all,
In my sg300 switch I configured the gi port as trunk:
switchport mode trunk
switchport trunk allowed vlan add 1
no spanning-tree portfast
no spanning-tree bpduguard
however the 'trunk allowed vla add 1' line generate error, i think because vlan 1 is the default, when i check the port it shows trunk, and it is operate well.
But wehen i show running-config it shows only this:
interface gigabitethernet1
no spanning-tree portfast
Why is the switchport mode trunk and the trunk allowed commands missing in the running-config? However I have another trunk port with allowed vlan 1,3, that is included partly in the running-config, but there is no switchport mode trunk
interface gigabitethernet52
no spanning-tree portfast
spanning-tree port-priority 16
switchport trunk allowed vlan add 3
Is the trunk the base config, so it is left by default?
thank youDynamic Desirable is the default.
Effectively the switch will negotiate with whatever the port is plugged into.
If the other side is a Trunk, it will form a Trunk
If the other side is an Access Port, they will both be an access port.
Vlan 1 is the Native and default vlan, therefore is always allowed on the Trunk, hence why it does not show up in the running config.
The running config will only show commands which are not the default.
I suspect whatever port interface gigabitethernet52 is plugged into on the other end, the config will be a Trunk because the default is to negotiate. -
Full "show run" output on Cisco Prime Infrastructure
Hi,
does anyone know if there's a way to see the entire "show run" config in one file?
on the gui it is presenting the configuration is divided into sections like - interfaces, ACL's, SNMP and so on...
i'm looking for one full file that i will be able to copy and paste on another device without deleting every headline.
hopefully you understand my request.
thanks,
AdirAdd - it's under the configuration archive tab:
-
Cisco WLC 5500 ver.8 running config
Does anybody have a complete "show-run" running config from a 5500 series controller, "sanitized" of course, they would care to post to share?
I need to create some config examples and do not have a piece of hardware to work with.
Thanks=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.01.13 14:15:58 =~=~=~=~=~=~=~=~=~=~=~=
config paging disable
Press Enter to continue...
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.130.2
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... Viten_2504
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.162.20
Last Reset....................................... Software reset
System Up Time................................... 1 days 2 hrs 23 mins 10 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +27 C
External Temperature............................. +30 C
Fan Status....................................... 4100 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ 50:06:04:CB:76:C0
Maximum number of APs supported.................. 25
AP Bundle Information
Primary AP Image Size
ap1g2 9588
ap3g1 11308
ap3g2 11216
ap801 7172
ap802 8588
c1130 5072
c1140 9428
c1250 6964
c1520 8072
c602i 3744
Secondary AP Image Size
ap1g2 9576
ap3g1 11296
ap3g2 11208
ap801 7164
ap802 8576
c1130 5072
c1140 9428
c1250 6964
c1520 8064
c602i 3736
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Network Information
RF-Network Name............................. wnbu
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Disable
Secure Web Mode RC4 Cipher Preference....... Disable
Secure Web Mode SSL Protocol................ Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Multicast Address : 0.0.0.0
IGMP snooping............................... Enabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth CMCC Support ...................... Disabled
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable
mDNS snooping............................... Disabled
mDNS Query Interval......................... 15 minutes
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 1000 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Disa Enable Auto Auto Down Enable N/A
4 Normal Disa Enable Auto Auto Down Enable N/A
AP Summary
Number of APs.................................... 3
Global AP User Name.............................. admin
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Viten_1142_2 2 AIR-LAP1142N-A-K9 00:22:bd:19:d5:80 default location LAG US 1
Viten_1142_1 2 AIR-LAP1142N-A-K9 00:22:90:90:df:6c default location LAG US 1
Viten_2602_2 2 AIR-CAP2602I-A-K9 c0:67:af:58:e0:db default location LAG US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
Viten_1142_2 disabled -
Viten_1142_1 disabled -
Viten_2602_2 disabled -
AP Location
Total Number of AP Groups........................ 0
Site Name........................................ default-group
Site Description................................. <none>
NAS-identifier................................... Viten_2504
AP Operating Class............................... Not-configured
RF Profile
2.4 GHz band..................................... <none>
5 GHz band....................................... <none>
WLAN ID Interface Network Admission Control Radio Policy
1 management Disabled None
4 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Viten_1142_2 2 AIR-LAP1142N-A-K9 00:22:bd:19:d5:80 default location LAG US 1
Viten_1142_1 2 AIR-LAP1142N-A-K9 00:22:90:90:df:6c default location LAG US 1
Viten_2602_2 2 AIR-CAP2602I-A-K9 c0:67:af:58:e0:db default location LAG US 1
RF Profile
Number of RF Profiles............................ 7
Out Of Box State................................. Disabled
RF Profile Name Band Description 11n-client-only
High-Client-Density-(802.11a) 5 GHz <none> disable No
High-Client-Density-(802.11bg) 2.4 GHz <none> disable No
Low-Client-Density-(802.11a) 5 GHz <none> disable No
Low-Client-Density-(802.11bg) 2.4 GHz <none> disable No
Typical-Client-Density(802.11bg) 2.4 GHz <none> disable No
Typical-Client-Density-(802.11a) 5 GHz <none> disable No
test 5 GHz <none> disable No
RF Profile name................................ High-Client-Density-(802.11a)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 5 GHz
Transmit Power Threshold v1...................... -65 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... 7 dBm
Max Transmit Power............................... 30 dBm
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. -78 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -80 dBm
Coverage Voice................................... -80 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ High-Client-Density-(802.11bg)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 2.4 GHz
Transmit Power Threshold v1...................... -70 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... 7 dBm
Max Transmit Power............................... 30 dBm
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Disabled
802.11b/g 2M Rate............................ Disabled
802.11b/g 5.5M Rate.......................... Disabled
802.11b/g 11M Rate........................... Disabled
802.11g 6M Rate.............................. Disabled
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Mandatory
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. -82 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -80 dBm
Coverage Voice................................... -80 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ Low-Client-Density-(802.11a)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 5 GHz
Transmit Power Threshold v1...................... -60 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... -10 dBm
Max Transmit Power............................... 30 dBm
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. -80 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -90 dBm
Coverage Voice................................... -90 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ Low-Client-Density-(802.11bg)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 2.4 GHz
Transmit Power Threshold v1...................... -65 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... -10 dBm
Max Transmit Power............................... 30 dBm
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. -85 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -90 dBm
Coverage Voice................................... -90 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ Typical-Client-Density(802.11bg)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 2.4 GHz
Transmit Power Threshold v1...................... -70 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... -10 dBm
Max Transmit Power............................... 30 dBm
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Disabled
802.11b/g 2M Rate............................ Disabled
802.11b/g 5.5M Rate.......................... Disabled
802.11b/g 11M Rate........................... Disabled
802.11g 6M Rate.............................. Disabled
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Mandatory
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. 0 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -80 dBm
Coverage Voice................................... -80 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ Typical-Client-Density-(802.11a)
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 5 GHz
Transmit Power Threshold v1...................... -70 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... -10 dBm
Max Transmit Power............................... 30 dBm
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. 0 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -80 dBm
Coverage Voice................................... -80 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
RF Profile name................................ test
Description...................................... <none>
11n-client-only.................................. disabled
Radio policy..................................... 5 GHz
Transmit Power Threshold v1...................... -70 dBm
Transmit Power Threshold v2...................... -67 dBm
Min Transmit Power............................... -10 dBm
Max Transmit Power............................... 30 dBm
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
Max Clients...................................... 200
WLAN ID maxClients
Client Trap Threshold............................ 50
Multicast Data Rate.............................. 0
Rx Sop Threshold................................. 0 dBm
Cca Threshold.................................... 0 dBm
Slot Admin State:................................ Enabled
Band Select Probe Response....................... Disabled
Band Select Cycle Count.......................... 2 cycles
Band Select Cycle Threshold...................... 200 milliseconds
Band Select Expire Suppression................... 20 seconds
Band Select Expire Dual Band..................... 60 seconds
Band Select Client Rssi.......................... -80 dBm
Load Balancing Denial............................ 3 count
Load Balancing Window............................ 5 clients
Coverage Data.................................... -80 dBm
Coverage Voice................................... -80 dBm
Coverage Exception............................... 3 clients
Coverage Level................................... 25 %
802.11n MCS Rates
MCS-00 Rate.................................. enabled
MCS-01 Rate.................................. enabled
MCS-02 Rate.................................. enabled
MCS-03 Rate.................................. enabled
MCS-04 Rate.................................. enabled
MCS-05 Rate.................................. enabled
MCS-06 Rate.................................. enabled
MCS-07 Rate.................................. enabled
MCS-08 Rate.................................. enabled
MCS-09 Rate.................................. enabled
MCS-10 Rate.................................. enabled
MCS-11 Rate.................................. enabled
MCS-12 Rate.................................. enabled
MCS-13 Rate.................................. enabled
MCS-14 Rate.................................. enabled
MCS-15 Rate.................................. enabled
MCS-16 Rate.................................. enabled
MCS-17 Rate.................................. enabled
MCS-18 Rate.................................. enabled
MCS-19 Rate.................................. enabled
MCS-20 Rate.................................. enabled
MCS-21 Rate.................................. enabled
MCS-22 Rate.................................. enabled
MCS-23 Rate.................................. enabled
AP Config
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... Viten_1142_2
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 13
MAC Address...................................... 00:22:bd:19:d5:80
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.162.110
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.162.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ Viten_2504
Primary Cisco Switch IP Address.................. 192.168.162.20
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... FlexConnect
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... system
S/W Version .................................... 7.4.130.2
Boot Version ................................... 12.4.18.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1142N-A-K9
AP Image......................................... C1140-K9W8-M
IOS Version...................................... 15.2(20150109:075323)$
Reset Button..................................... Enabled
AP Serial Number................................. FTX1332SBYY
AP Certificate Type.............................. Manufacture Installed
FlexConnect Vlan mode :.......................... Disabled
FlexConnect Group................................ Not a member of any group
Group VLAN ACL Mappings
FlexConnect Local-Split ACLs :
WLAN ID PROFILE NAME ACL TYPE
Flexconnect Central-Dhcp Values :
WLAN ID PROFILE NAME Central-Dhcp DNS Override Nat-Pat Type
4 test123 False False False Wlan
FlexConnect Backup Auth Radius Servers :
Primary Radius Server........................... Disabled
Secondary Radius Server......................... Disabled
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... admin
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 10.6.0.25
AP Up Time....................................... 1 days, 02 h 13 m 41 s
AP LWAPP Up Time................................. 1 days, 02 h 12 m 25 s
Join Date and Time............................... Mon Jan 12 12:55:07 2015
Join Taken Time.................................. 0 days, 00 h 01 m 15 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_DISABLED
Operation State ............................. DOWN
Operation State Down Cause................... Radio is exiting inline CDP low power mode holddown.
Operation State Down Code.................... RADIO_RC_EXIT_LOW_PWR
Radio Role .................................. ACCESS
Radio Mode .................................. Remote
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:23:eb:dc:c6:90
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
6000 Kilo Bits........................... SUPPORTED
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... SUPPORTED
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... SUPPORTED
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 6
Tx Power Assigned By ...................... DTPC
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 11
Channel Assigned By ....................... DCA
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... AUTOMATIC
Legacy Tx Beamforming ..................... DISABLED
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... Viten_1142_2
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 13
MAC Address...................................... 00:22:bd:19:d5:80
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.162.110
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.162.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ Viten_2504
Primary Cisco Switch IP Address.................. 192.168.162.20
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... FlexConnect
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... system
S/W Version .................................... 7.4.130.2
Boot Version ................................... 12.4.18.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1142N-A-K9
AP Image......................................... C1140-K9W8-M
IOS Version...................................... 15.2(20150109:075323)$
Reset Button..................................... Enabled
AP Serial Number................................. FTX1332SBYY
AP Certificate Type.............................. Manufacture Installed
FlexConnect Vlan mode :.......................... Disabled
FlexConnect Group................................ Not a member of any group
Group VLAN ACL Mappings
FlexConnect Local-Split ACLs :
WLAN ID PROFILE NAME ACL TYPE
Flexconnect Central-Dhcp Values :
WLAN ID PROFILE NAME Central-Dhcp DNS Override Nat-Pat Type
4 test123 False False False Wlan
FlexConnect Backup Auth Radius Servers :
Primary Radius Server........................... Disabled
Secondary Radius Server......................... Disabled
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... admin
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 10.6.0.25
AP Up Time....................................... 1 days, 02 h 13 m 41 s
AP LWAPP Up Time................................. 1 days, 02 h 12 m 25 s
Join Date and Time............................... Mon Jan 12 12:55:07 2015
Join Taken Time.................................. 0 days, 00 h 01 m 15 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
Radio Mode .................................. Remote
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:23:eb:dc:c6:90
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... SUPPORTED
MCS 1.................................... SUPPORTED
MCS 2.................................... SUPPORTED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 21
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 6
Tx Power Level 1 .......................... 14 dBm
Tx Power Level 2 .......................... 11 dBm
Tx Power Level 3 .......................... 8 dBm
Tx Power Level 4 .......................... 5 dBm
Tx Power Level 5 .......................... 2 dBm
Tx Power Level 6 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Tx Power Assigned By ...................... DTPC
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 48
Channel Assigned By ....................... DCA
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140,
......................................... 149,153,157,161,165
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... AUTOMATIC
Legacy Tx Beamforming ..................... DISABLED
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Cisco AP Identifier.............................. 4
Cisco AP Name.................................... Viten_1142_1
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 13
MAC Address...................................... 00:22:90:90:df:6c
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.162.117
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.162.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ Viten_2504
Primary Cisco Switch IP Address.................. 192.168.162.20
Secondary Cisco Switch Name...................... Viten_5508_1
Secondary Cisco Switch IP Address................ 192.168.162.22
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_DISABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... FlexConnect
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... system
S/W Version .................................... 7.4.130.2
Boot Version ................................... 12.4.18.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1142N-A-K9
AP Image......................................... C1140-K9W8-M
IOS Version...................................... 15.2(20150109:075323)$
Reset Button..................................... Enabled
AP Serial Number................................. FTX1308S2H3
AP Certificate Type.............................. Manufacture Installed
FlexConnect Vlan mode :.......................... Disabled
FlexConnect Group................................ Not a member of any group
Group VLAN ACL Mappings
FlexConnect Loc -
Need to find out what has been modified to running-config
Hello,
When I enter the "reload" command, Cisco ASA 5510 asks me
a question: System config has been modified Save? [Y]es/[N]o:
All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out what
has been modified before the reboot
Is there any way to find out what has been modified to the running configuration.
Thanks!If you want to know when changes are made, but don't want to setup TACACS (and you have a syslog server setup), you can have the router syslog all commands entered while in config mode:
devcorert01#conf t
devcorert01(config)#archive
devcorert01(config-archive)#log config
devcorert01(config-archive-log-cfg)#hidekeys
devcorert01(config-archive-log-cfg)#logging enable
devcorert01(config-archive-log-cfg)#notify syslog
Anytime someone enters any command while in config mode, the command will be sent to your syslog server.
Examples:
Jul 21 10:15:41 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:do sh run
Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:interface GigabitEthernet2/2
Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:shutdown
Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:no shutdown
Note the "do show run". Even thought that is not a config command per se, it was entered while in config mode. Also notice the user is "console". If it was from a telnet session, you would see
Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:interface GigabitEthernet2/2
Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:shutdown
Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:no shutdown
Mike -
VLAN RUNNING Config fetch Failed
Hi;
I have running Ciscowork LSM 3.2 with RME Ver 4.3 and Running SNMP V3 on all device. Out of 134 device 12-13 shows me Vlan running Config fetch failed. Please also find the dcmaservice.log in attachment.
I already verify the Crediential number or times, I can access the devices from SSH and Telnet, on Cisco works RME shows Running and Startup Config success while VLAN Running Config fetch failed. and on some device it show following
Protocol and Platforms passed = TELNET , RMEIOS
trying for Telnet
Failed to get CmdSvc from DeviceContext....
Thanks,
Best regards;
Shoaib AhmedHI Shoaib,
Try ssh\telnet into the device manually and issue the command copy flash:vlan.dat tftp: and
enter the IP address of the LMS server? Does it work? If that works fine, try to increase
the tftp timeout.
This can be done under RME> Admin> System Preferences> RME Device Attributes.
if it failed with an Error as below :
%Error opening tftp: ............
Then check if there any firewall in between these device and LMS blocking TFTP as TFTP is the only protocal
that fetch the vlan.dat from the device.
Thanks--
Afroj
Maybe you are looking for
-
Hi All, In a sales order, there is a single ltem with multiple schedule lines with date and quantity. Delivery person delivers as per the schedule line date and quantity but there are instances where there is short delivery. Hence needs short closing
-
Cumulative GL Line Item Balance Report
Hi, Can anybody suggest Cumulative GL Line Item Balance Report in SAP. thanks in advance Muhammed Riyas
-
How can I get firefox to remember my most used websites when I change tabs?
Have downloaded a new firefox and whilst the history is remembered I can't get my most used websites to comeup and when I move away from home page I get trovi which I have never used and don't want to use - just want things as they were
-
Web Dynpro Tree in the Component Controller
Hi!!! I made a tree in the view. But to separating the view and the model I would like to create the tree in the component controller. Therefor I copy the code from the view to the controller and adapt them, but it doesn`t work. I get the first node
-
How to Call User Defined Procedure in Report
I have a procedure which return some values.and i want to call this procedure in PLD.In PLD's properties field there is a tab named Content , when i select source type as procedure and give the procedure name the PLD is unable to call this procedure