Disable mouse click change slide

Hello!
I am making screen casts and would like to be able to actually click on a keynote presentation without the transition happening. I would like to be able to just use the arrow key to change slides/builds. I use screen flow and it allows for some neat features when a mouse is clicked in post production.
Thanks,
-Josh

table.setEnabled(false) ?edit And there's no such thing as a "table cell component".
if you're referring to the renderer, that isn't a real component at all. The component is used only for rendering -- drawing -- the cell.
The editor, on the other hand, is a real component.
Edited by: Darryl.Burke

Similar Messages

How to disable mouse click ??

hi ,
i have a form in which i have a block abc in this there are 5 items say a,b,c,d,e
suppose my cursor is in item field 'a' there i have entered some value then i go to item field b and entered some value and then i go to field c without any enter or tab but with the help of mouse only. there i want to put a trigger on block level ( on-mouse-click) that whenever anyone tries to move from the current field to another field with the help of mouse then the cursor should be moved to previous item automatically that is item 'b'. in breif i want to disable mouse click from moving one field to another.
on-mouse-click i can store system.current_item i.e 'a' but not able to store previous field i.e 'b'.
please help....
thanks
Edited by: Hi FRNzzz!! on Feb 23, 2010 7:10 PM

Hello,
Try to set the mouse navigation limit form-level property to item when you want to disable the mouse.
Francois

Why does the ALT key disable mouse clicks on some machines?

I have a drawing program, the main Window of which extends JFrame and contains a Canvas, which extends JPanel. The Canvas has a MouseAdapter, KeyAdapter and JMenuBar. It also has a Tools palette, which extends JDialog and has Buttons, which extend JToggleButtons.
One button is called Zoom. After pressing this button, you can Zoom In and Zoom Out by clicking the mouse on a point of the illustration. It differs from pressing Ctrl Plus and Ctrl Minus, because the point where you click is kept in place, and only all the other points move.
Zooming In is done by clicking the mouse and Zooming Out is done by pressing the ALT key and clicking the mouse. The Zooming In works on all computers, but for some strange reason, the Zooming Out doesn't work on all computers. The computer where it doesn't work, after pressing the ALT key and clicking the mouse, it does not recognize the mouse click, and never reaches the mousePressed method in my debugger.
The computer where it doesn't work has the Windows XP Professional operating system. But some computers where it does work have the same operating system. The problem also does not depend on the keyboard or mouse, because I tried a different keyboard and mouse, and it still didn't work.
I wonder if the reason why it doesn't work on some computers has to do with that the ALT key is also used differently (which might depend on the operating system)? Pressing the ALT key and clicking the mouse Zooms In a picture by keeping the point in place and only moving all the other points
I do not want to use a different key, since one release of my program is a plugin for Photoshop, and Photoshop also uses the ALT key to achieve the same thing.
Thanks for checking on this! I will appreciate your help!

Ok, I did apply KeyBindings. Since the AnanyaCurves class extends JFrame, I couldn't apply KeyBindings there, but I could apply KeyBindings to my CurveCanvas class, which extends JPanel, which extends JComponent. However I still have my first two problems:
1) After pressing the ALT key, clicking the mouse doesn't get recognized. You never reach the mousePressed method, where it's supposed to exit the program.
2) After opening a menu, such as the Nothing menu by pressing ALT and N, pressing a key which is not an accelerator key of a menu doesn't get recognized, such as pressing the E key. You never reach the actionPerformed method of the exitF action, where it's supposed to exit the program.
Here is my SSCCE with the KeyBindings:
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
import java.lang.reflect.*;
import java.util.*;
import javax.swing.*;
import javax.swing.plaf.*;
public class AnanyaCurves extends JFrame
CurveCanvas canvas;
JMenuBar menuBar;
Command quitCmd;
JMenu fileMenu, nothingMenu;
JMenuItem quitItem, nothingItem;
boolean alt;
public AnanyaCurves(Dimension windowSize)
    Font boldFont = new Font("Verdana", Font.BOLD, 12);
    Font plainFont = new Font("Verdana", Font.PLAIN, 12);
    Object top;
    Basics.ananyaCurves = this;
    alt = false;
    try
      UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
      SwingUtilities.updateComponentTreeUI(this);
    catch(Exception e)
    UIManager.put("MenuItem.acceleratorFont", new FontUIResource(UIManager.getFont("MenuItem.acceleratorFont").decode("Verdana-PLAIN-12")));
    Basics.ananyaCurves = this;
    enableEvents(AWTEvent.WINDOW_EVENT_MASK);
    setTitle("Ananya Curves");
    Dimension docSize = new Dimension(274, 121);
    canvas = new CurveCanvas(docSize);
    menuBar = new JMenuBar();
    setJMenuBar(menuBar);
    fileMenu = new JMenu("File");
    fileMenu.setMnemonic('F');
    fileMenu.setFont(boldFont);
    quitCmd = new Command("quit", "ctrl Q");
    quitCmd.putValue(Action.NAME, "Quit");
    quitItem = new JMenuItem(quitCmd);
    quitItem.setFont(plainFont);
    fileMenu.add(quitItem);
    menuBar.add(fileMenu);
    //fileMenu.setVisible(false);
    /*JMenuBar hiddenMenuBar = new JMenuBar();
    hiddenMenuBar.add(fileMenu);
    getContentPane().add(hiddenMenuBar, BorderLayout.CENTER);
    getContentPane().add(new JPanel(), BorderLayout.CENTER);*/
    nothingMenu = new JMenu("Nothing");
    nothingMenu.setMnemonic('N');
    nothingMenu.setFont(boldFont);
    nothingItem = new JMenuItem("NoAction");
    nothingItem.setFont(plainFont);
    nothingMenu.add(nothingItem);
    menuBar.add(nothingMenu);
    addMouseListener(new MouseAdaption());
    addKeyListener(new KeyAdaption());
public static void main(String[] args)
    Dimension windowSize = new Dimension(300, 200);
    AnanyaCurves ananyaCurves = new AnanyaCurves(windowSize);
    ananyaCurves.pack();
    ananyaCurves.setBounds(0, 0, windowSize.width, windowSize.height);
    ananyaCurves.setVisible(true);
    ananyaCurves.requestFocus();
public void exit()
    this.dispose();
    System.exit(0);
class MouseAdaption extends MouseAdapter
    public void mousePressed(MouseEvent e)
      if (AnanyaCurves.this.alt == true)
        AnanyaCurves.this.exit();
class KeyAdaption extends KeyAdapter
    public void keyPressed(KeyEvent event)
      /*int keyCode = event.getKeyCode();
      if (keyCode == KeyEvent.VK_ALT)
        AnanyaCurves.this.alt = true;
      else if (keyCode == KeyEvent.VK_E)
        AnanyaCurves.this.exit();
    public void keyReleased(KeyEvent event)
      AnanyaCurves.this.alt = false;
class Basics extends java.lang.Object
public static AnanyaCurves ananyaCurves;
public Basics()
class Command extends AbstractAction
String name; // the command name (not the menu item string)
String accelerator;
public Command(String name, String accelerator)
    super();
    this.name = name;
    if (accelerator != null && !accelerator.equals(""))
      this.accelerator = accelerator;
      KeyStroke k = KeyStroke.getKeyStroke(accelerator);
      putValue(Action.ACCELERATOR_KEY, k);
public void quit()
    Basics.ananyaCurves.dispose();
    System.exit(0);
public void actionPerformed(ActionEvent actionEvent)
    try
      Method f = getClass().getMethod(this.name, (Class[])null);
      f.invoke(this, (Object[])null);
    catch (NoSuchMethodException e)
    catch (InvocationTargetException e)
    catch (IllegalAccessException e)
class CurveCanvas extends JPanel
public CurveCanvas(Dimension docSize)
    super();
    Action altF = new AbstractAction()
      public void actionPerformed(ActionEvent e)
        Basics.ananyaCurves.alt = true;
    Action exitF = new AbstractAction()
      public void actionPerformed(ActionEvent e)
        Basics.ananyaCurves.exit();
    this.getInputMap(WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke("ALT"), "alt");
    this.getActionMap().put("alt", altF);
    this.getInputMap(WHEN_IN_FOCUSED_WINDOW).put(KeyStroke.getKeyStroke("E"), "exit");
    this.getActionMap().put("exit", exitF);
In the getInputMap method I was trying to use the condition WHEN_IN_FOCUSED_WINDOW, hoping that the bound key would be recognized, but it didn't work. And, by the way, I still used the KeyAdapter so that the alt attribute of AnanyaCurves can be set to false when the ALT key is released.
I will appreciate your help very much! Thanks for your time!

Disable mouse click to full screen

Every time I click on an image to drag it to a different location on the screen, it jumps to full screen view. Is there a way to disable this?
Thank You!

Check to see if your mouse button is dirty or your cable is intermittent. It's possible it's actually sending multiple clicks to the computer.
Consider temporarily swapping in another mouse to troubleshoot, and potentially eliminate this possibility.
-Noel

How to disable mouse click on checkbox for each treeviewitem?

treeview provode checkbox with state picture. When click on the pic, it will change the state pic.
I want to have this on display, but only for display, not allow user click on it to switch state pic. It means checkbox is read-only.
How to do it?

Hi,
You can do this :
-Create a function :
wf_set_checkbox_state (long al_tvihandle, long al_state) {
     treeviewitem ltvi
     tv_1.GetItem ( al_tvihandle, ltvi)
     ltvi.statepictureindex = al_state
     tv_1.SetItem ( al_tvihandle, ltvi )
-In the Clicked Event of the treeview add this code :
long ll_state
treeviewitem ltvi
tv_1.GetItem ( handle, ltvi)
ll_state = ltvi.statepictureindex
post wf_set_checkbox_state (handle, ll_state)
Regards.
Abdallah.

Can spark datagrid mouse click be disabled while in a custom item editor?

Hi,
Is it possible to prevent a user from clicking on another cell in a datagrid until the cell currently being edited has had its data saved?
I would like to validate the cell's text data as it is being entered by a user, character by character. If the validation fails, I would like to put up an error message and prevent the user from clicking outside of the cell. I am able to validate the data and put up an error message. But I have not found a way, if there is one, of disabling mouse clicks in other cells. I've tried setting the IE's parent.editable, .enabled and .mouseEnabled properties to false. But none of these are working for me.
Thanks,
-Adobegillisisle2

The session does stay if I hit the TAB or RETURN keys. I return false from my overridden save() function and the session stays keeping the user in the edit cell, allowing fixing the invalid data. But I don't get the same behavior when I click the mouse on another cell. In these cases, my save function is still called, and I still return false ( in the case where the validation fails ), but the edit session goes away.

Pass Mouse click events from JavaScript to Falsh Movie

Hi,
I have an interesting problem here.
i am trying to create a web page which has my
flash-presentation movie. i need to disable mouse click &
keyboard click navigation of the flash movie. The only way by which
i can navigate my slide in the flash movie should be using 2
buttons say Next & Prev that are i my web page.
when i click the Next button i should be able to go to the
next slid or the animation in the same slide like how i do in the
power Point.
Is there any way by which i can send these mouse click
events from my javascript to my flash movie or is there any other
means by which i can achieve this.
~Blackperil

Hi Mathias,
What i understood is that you want to triger a server side event (simulate onClick event of button)from a client side event (javascript confirm popup), based on the choice of user..
You can also try this one...
Check = confirm("Do you really want to proceed?");
if (Check == true)
document.getElementById('do_proceed').click();
else
document.getElementById('do_cancel').click();
Regards,
Anubhav

Focus should not be lost on mouse click

hai,
i have a problem with validating a jtextfield,
i wrote a code for that jtextfield,such that if any error occurs while entring the message is shown on focus is gained on to that textfield,even if user tries to move to the next component using tab he should correct the entry only then focus is shown to the next component on pressing tab,but this failed with mouse click,i mean other than tab if he uses mouse and click on the next component it goes to the next componenet without validating the textfield entry.
so please help me in disabling mouse click event.

how are you validating it then? Using a focus listener for focuseLost() shouldn't care about tab or mouse clicks.

Fullscreen disable page change on mouse-click

Hey there!
I created a form that automatically switches to full screen mode.
If users now click into the form (not directly on a checkbox etc.) the next page pops up. Is it possible to deactivate page change on mouse-click?
Thanks in advance!

Hi,
There is an AcroForm script for turning automatic page advancement OFF:
app.fs.clickAdvances = false;
I suspect that this can be translated to XFA javascript "as is", but it will be a while before I can check.
Have a go and maybe someone may have the solution as well.
I will post back later if I get in working in LC Designer.
Good luck,
Niall

Diable "open dialog box" on right mouse click so I can use l mouse to advance to next slide and r mouse click to "go back." How in PP 2010 for mac????

I do presentations in PP10. I am new to macair, and used to Windows. HOW DO I DISABLE THE "OPEN DIALOG BOX ON RIGHT CLICK"? I would like to use L mouse to advance slide, and R mouse to go back. The default is to use R mouse to open dialog box. I can disable this by unchecking the box in "advanced" on the PC. How do I do it with the Mac????
Thanks
hacmd

Hi Rod,
As originally stated in my opening post, the SWF is to be inserted into an Articulate '13 slide (what I called an aggregator originally - I tried not to bring them up since I don't want the chatter about "There's your problem - using Articulate"! ).
Recall that posting this published file to our LMS did not allow right-mouse click functionality as the flash player menu just gets in the way.
If I insert the captivate 6 files into Articulate as a Web Object (referencing the entire folder with html, htm and assets, and then posted to our LMS, and it DOES allow RM click operations in both IE and FF (although no sound on the Captivate slide in FF). But this is not what we want to do as this introduces 2 navigation controls (the Captivate one and the Articulate Player).
Why must anything be posted to a web server for this functionality to work?
I am able to go into the Captivate 6's published folder, and launch the Captivate demonstration by simply double clicking on the index.html file and this works great in both FF and IE after changing the security settings for flash.
Again - I can not believe I am the only one out there trying to use the right-mouse click feature to do a software simulation by embedding the Captivate SWF into an Articulate '13 project.

I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but

I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but ON load will not work.
PLEASE HELP>
I do not know how to reload/reinstall "ADOBE" golive default actions. I'm using golive cs mac version and "ON LOAD" action. I can't select it when creating a golive action.....It converts it or something to a rollover..
How can I reistall basic adobe actions???
Is it a bug???
Is it a known issue???
Do I need something??
Am I missing something???
Thanks a bunch..
Kev

In article <[email protected]>,
[email protected] wrote:
> I do not know how to insert the auto slideshowaction as a head action item.
> The steps.
> Can you explain how to do it?
I just remembered I have a couple of screen snaps online to explain how
it's done:
1. place your base image and name it in the inspector
2. from the smart objects palette grab the head action item, the one
with a question mark in its upper, green half - the 2nd one from the
left. Drop that into the pages head section.
3. in the inspector set the action to run OnLoad and select the base
image that you named in the first step and set the other parameters.
This was done in the days of GL6, but not much had changed in GL CS.
Anyway you might also refer to GL's online help. It describes how to set
up all the actions that ship with GL.
Cheers Martin

How do I set my project to advance to next slide on mouse click vs just play?

Captivate 6 on mac running OS 10.7.5 file format in question .htm (firefox)
I'm brand new to Captivate 6 (never used it before) I have put together a mock presentation from scratch which has a few introductory slides then a quiz. When I publish it there is a "play" button which is NOT the behavior I want.
I watched a training video from Lynda.com and the insstructor imported a PPT file, there was a dialog box which asked the how to advance slide, there was a drop down menu and one of two options was advance "on mouse click". This is the behavior I'm looking for.
I've scoured the internet and forums etc to find a comparable option elsewhere in Captivate 6 when creating from scratch vs importing from PPT and cannot find one anywhere. I've also read that you can insert a click box object and that that would do what I'm looking for but that doesn't work either.
Does any such option exist and if so where/ how do I get to it/ use it. Please see attachments below. First screen shot is the first slide I get which isn't the first slide either, what's up with that? Next one is simply to show how the project just "plays" instead of advancing slide by slide. Third is my publish dialog box. Bottom line I don't want a "play" button I want the user to mouse click next, next, next etc. How do I do this?
Thank you for any help or suggestions!

Maybe I understand something wrongly, but thought you also wanted to know how you can make slides advance on clicking the Next button instead of having it playing on automatically? And instead of using the playbar you want to have a Previous and Next button?
The way imported PPT with advance on Mouse click works is because there is a click box added to each slide that pauses that slide at its end. The user has to click on the slide to advance.
A click box is an 'interactive' object: this means that you can have it pausing the slide, that the user can interact with it and trigger an action like 'Go to Next Slide'.
You added (from what I see on the last screenshot) another interactive object, but now I'm confused: the third screenshot has a Prev and Next arrow, I think those are shapes. You do not need to add a click box on top of them (what I see on the last screenshot), they can be converted themselves into buttons. I blogged a lot about those shape buttons. Anyway, both click box and shape button can pause the slide. This is the case by default for click boxes (at the end of their duration, their timeline), for shape buttons you have to tell them to pause in the Timing accordion. In your case I certainly would choose a shape button because they can be put on a master slide, or timed for the rest of the project whereas Click boxes need to be unique on each slide, you'l have a lot of copy/paste to do then. In the Action accordion, On Success you choose the action, I think in this case you want 'Go to Next Slide' for the Next 'thing'
As for the first screenshot, Rod explained that you cannot get rid of the play button for pdf output, but you can have a poster image instead of the blank screen. There is a folder icon in Preferences, Project, Start and End when you deselect AuotPlay.
Here is a link to an article where I explain shape buttons:
http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6
There is an on-demand webinar as well on the Adobe site which I presented, only about shape buttons.
Lilybiri

Mouse Clicks' Queue when Button is Disabled

Hi, I was wondering about the Disable property for UI
Components.
In the docs it says that when the component is disabled it
ignores all
interaction whatsoever - in particular - user interaction.
In my case, the button is disabled for a few seconds right
after it
was clicked by the user (I disable it till the httprequest is
returned
and then enable it).
What happens is that if the user clicks the button while it's
disabled
- nothing happens. But when the button turns enabled - it
acts as if
it just got the click event.
It seems like the mouse click event went into this queue and
the
button listened to it right after to turned enable?
Am I correct? If so - how can I prevent this problem?
If I'm wrong, what's the reason for this? And again, how can
I sort
this so the user can't send mouse clicks to the button when
it's
disabled??
Many thanks :)
Gilad

"giladozer" <[email protected]> wrote in
message
news:gnbng6$o6m$[email protected]..
> Hi, I was wondering about the Disable property for UI
Components.
> In the docs it says that when the component is disabled
it ignores all
> interaction whatsoever - in particular - user
interaction.
> In my case, the button is disabled for a few seconds
right after it
> was clicked by the user (I disable it till the
httprequest is returned
> and then enable it).
> What happens is that if the user clicks the button while
it's disabled
> - nothing happens. But when the button turns enabled -
it acts as if
> it just got the click event.
> It seems like the mouse click event went into this queue
and the
> button listened to it right after to turned enable?
> Am I correct? If so - how can I prevent this problem?
> If I'm wrong, what's the reason for this? And again, how
can I sort
> this so the user can't send mouse clicks to the button
when it's
> disabled??
No idea about whether you're correct or wrong, but you might
want to try
setting mouseEvents = false on the button and see if that
helps.

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

:system.cursor_block value does not change when mouse click

Form created with Forms version 6.0.8.8.0. Consists of a control block that has the toolbar buttons, a filter control block that contains item, and a data block. The filter control block and data block are on a tabbed canvas. There are 3 tabs with corresponding filter control block and data block on each.After the data block is queried, code sets the navigation to the control block with the go_item built-in. The user would use a mouse click on the filter control block on one of the tabs to activate an LOV, code is in a generic when-mouse-click trigger that will determine the item focus with the value in the system variable :system.cursor_block. Works for the first tab. Does not work for 2nd or 3rd tab. On-error trigger does not capture any error. Values for :system.cursor_block for tab 1 show that value before mouse click is 'control.detail' and after mouse click is 'filter.a'. For tabs 2 and 3 the value before mouse lick is 'control.detail' and after mouse click is 'control.detail' instead of 'fiter.b' or 'filter.c'. Verified that the 3 filter blocks are identical. Can anyone shed some light on this anomoly? I have been looking for this solution (many different iterations and changes to trap it) for too long.

:System.Cursor_Block reports the name of a block, NOT a BlockName.ItemName.
Use :System.Trigger_Item with your mouse click, or :System.Cursor_Item.

Disable mouse click change slide

Similar Messages

Maybe you are looking for