Output Preview Problem

There is a new issue that came with the 11.0.99 upgrade. In the Output Preview window, when the Total Area Coverage is check and the values in the art are over the percent value requested the position of the highlighted values does not match the position of the image. Also, the position and image area highlighted change with any change of the zoom view . This problem occurs only in the Macintosh platform but not in the Windows platform.

Na výběr máš vlastně ze dvou používaných. Buď starší, univerzální a odskoušený PDF/X1a nebo nejnovější PDF/X4.
Co použít záleží na tom, co příjemce PDF podporuje. S PDF/X1a si poradí každý, PDF/X4 pouze u moderních Ripů.
Rozdíl mezi nima ve stručnosti je především ten, že u PDFX/1a nemá průhlednost a všechny soubory musí být CMYK, tudíž, pokud budeš z Indesignu ukládat do PDF/X1a a budeš mít někde v grafice průhlednost,
průhledné objekty se sloučí. Pokud budeš mít použita RGB data, převedou se ti do CMYKu.
U PDF/X4 je podpora průhlednosti a RGB data zůstávají.
Aleš
PS:
Musíš se holt smířit s tím, že CMYK hodnoty v souborech, které nejsou ve standardu PDF/X, se v Acrobatu XI zobrazují špatně. Viz založení tohoto vlákna. Sám vidíš, že o této chybě vědí,
a někdy v budoucnu to bude opraveno, viz 10 odpověď od Irosentha.

Similar Messages

Output Preview Problems

Hi All,
I have recently been having problems with the Output Preview in Acrobat 11 and it's driving me crazy.
The output preview is not reliably showing the correct CMYK Colour values - see below
I have created a sign in Illustrator CC 2014 and printed to PDF using the 'Press Quality' settings. I have ensured that all Adobe software is using the same profile (North American General Purpose 2) by setting it Bridge.
I import the PDF into Photoshop and get a yellow value of 100%
I then open Acrobat and check the same area and get a yellow value of 97%
In Acrobat I open Preferences > Colour Management and change the colour profile from North American General Purpose 2 to something else and then back to North American General Purpose 2. I check the yellow again and get 100%
Has anyone else had this issue? If so, how did you fix it? Many thanks in advance.
Kind regards,
Christian.

I think you are measuring the image preview from Photoshop when you open your rastered Photoshop file in Acrobat. You should probably save your original Illustrator file as a PDF (not print to PDF). When you open the PDF in Photoshop, you are converting your vector file to an Image, which I think also creates a low-res preview of the actual image (which has various uses). If you check your Photoshop preferences, you might be able to turn the preview creation off, but I really wouldn't worry about it. As a test, save your original Illustrator file as a .tiff and see how that works. Unless you are adding something in Photoshop that can't be added in Illustrator or InDesign, it's usually better to keep everything vector, as much as possible.

Problem with creating PDF in Photoshop, or Acrobat Output Preview

I saved a PDF in Photoshop and Acrobat's output preview the text was black in 4 colors and Rip did not have this problem. Why?

You have gone a while without a reply here, so I'll bump your post at least, but it is not clear from your question exactly what your problem is.
'Black in four colors' I don't understand this statement. Black is black and does not have colours.
'Rip' I don't know what you mean by Rip.
One tghing that comes to mind is that if you have exported a large layered document to PDF and that document had vectored objects like Type layers, whenn you view the PDF file you might initially see those vectored objects in black while the system is catching up and rendering the type layers etc. In that case, just waiting will see it corrected, but a 3550 x 8800 pixel banner file I delivered to a printer recently, took ages to render on the printer's slow system.
If you expand on your problem, I amn sure someone will try and help.

Smartforms - problems with output preview when vedor has different languag

Hi all,
The output preview does not work when vendor has different communication language then english?
Exact description of the problem described by the functional people:
"For the Latin America countries that use the SMARTFORM today, we have noticed that if the vendor has communication language English, the PO is displayed fine in the Output preview in iShop. However, if the vendor has communication language e.g. ES maintained in the vendor the output preview fails. We would like to have it so that even if the the vendor has a different communication language than EN maintained on the vendor the PO should be able to be displayed in the output preview of the SRM system."
So has enyone encountered this problem before? All help is appriciated!
Thanks in advance!
/Armin

Well the problem was that the language pack with Sapnish language was not installed.
Thanks for the answer 2p 2u!

Selecting Multiple Objects with Output Preview Causing Problems

I'm trying to edit a PDF and need to select multiple objects. Without Output Preview open, I can easily select all the items I need using the shift key. With Output Preview open, whenever I try to select the second object, Output Preview creates a sticky note, instead of selecting the second object.
I am also using the PitStop Pro plug-in.
Any idea how to correct this problem? Thanks!

Unfortunately it seems that the new sticky note feature with the output preview in Acrobat XI uses the same keyboard shortcut as multiple selection tool in Pitstop (shift).
Closing the output preview is the easiest way to get around this issue.
We could consider changing the key for multiple selection in PitStop, but 'shift' is pretty much a default, so what could we change it too?
If anyone has any thoughts could they email me, I am the product manager responsible for Pitstop at Enfocus and my email is '[email protected]'
All feedback gratefully received.

Problems with output preview in Acrobat

Hello, I placed a pdf form I created in Adobe LiveCyle Designer in Acrobat 8 professional. I could see everything on the form, when i go to output preview I am unable to see my type that was in the fields. Can anyone tell me what i'm doing wrong?

Hello Brandy,
I tested it and the typed in text appears to display properly.
Have you tried this PDF on another computer?
Are you using Acrobat to preview or just a PDF reader... (if the later, which version? you may wish to update).

How do I set the Simulation Profile to CMYK by default in the Output Preview Window

I've just upgraded to Adobe PDF X Pro from Acrobat 6 Pro. In Acrobat 6 I could just go to Advanced> Separation Preview and it would let me check off colours in CMYK, this was useful for me to check that Blacks were full black and not registration. I work in Newspaper media and always check if Ads are using the correct colours in the Ads they supply us.
Now here's my problem, every time I open up a new pdf Ad from clients and go the output preview it always shows me the colours in Adobe RGB by default. This is very annoying especially when I have to check a ton of Ads by clicking and scrolling down to say 'Photoshop 5 Default CMYK' just so I can check the Black. Is there any way to have it like it was in Acrobat 6? And just have it always show me the output preview in CMYK by default?
Edit: Typos.

Ok, after fiddling around I've figured it out. Edit> Preferences> Colour Management> Under Working Spaces Change CMYK: PhotoShop 5 Default CMYK. Now all pdfs show up as CMYK when I click on output preview.

Acrobat 9 Standard missing Output Preview in Advanced...

Hi,
I find it weird that I can't find the Output Preview option on acrobat. I go to Avanced>Print Production>Acrobat Distiller???
Don't have a clue what Acrobat Distiller is, so I try going into Tools. Nothing. Then I try bringing up the Help and even that doesn't want to come up.
Does Acrobat 9 even have an Output Preview? I need to use it for checking CMYK pantones and such. After Google searching I'm desperate

I'm having the same problem...
Acrobat v.9.4.5
I go to the 'Print Production' menu and the only thing on the menu is 'Acrobat Distiller'
Where is Output Preview and all the other options? Where have they gone?
This is driving me nuts - can anyone please help or suggest a reason why? The only other Adobe application installed in Acrobat Reader X. Machine is running XP Pro. Everything is fully updated.
Thanks.

Acrobat X and XI and Output preview

User had CS 6 installed with Acrobat X on her mac workstation. also installed Adobe Cloud with Acrobat XI. Once the install of Adobe Cloud was complete, the user was having issues with her Output Preview screen. The Simulation Profile field defaults to Adobe RGB (1998), though she continues to chance to GRACol 2006. I uninstalled Adobe Cloud and Acrobat XI, but the problem persisted. I uninstalled CS6 and Acrobat X. I reinstalled CS6 and Acrobat X but the issue with Output Preview still existed. My thought is a setting file on the workstation is causing the continual problems with the Outlput Preview information. Has anyone experienced this and found a workaround? There is info on the web that indicates it is a bug with Cloud but no workarounds.
Thanks

Moving this discussion to the Acrobat Installation & Update Issues forum.

Output Preview does not show right values of Spots

I have a document created in InDesign. It contains only 1 spot color (no CMYK). Acrobat shows worng spot values in Output Preview (100% for 100% spot, but 4% for 10% spot. Pitstop shows the right value. Can you tell me what is the problem?

Hi Lisa,
First you know for which transaction you want to print the form. For example if it Purchase Order then Transaction is ME22n or ME23n .
The error you are getting might be because of one of the following reason.
1) The output you are using should be configured for particular order number .For example if You want to print the form for a PO number 40000020 For this you must have configured output type in the messages of that order number.
Go to ME22n give the order number and press enter . In the application tool you can find messages button just click on that and it wil take you to other screen where you can give putput type print medium and printer in Comunication method and in firther data give start immediately
2)Let us suppose it was configured then the output must have configured properly.
Thanks,
Nageswar

Output Preview & Pages Scrolling

Hi!
When i turn on/off any ink in Output Preview, this window become active and i can't scroll document with keys "Page Up", "Page Down".
How to solve this problem?

Correct, in Acrobat 7 the focus did not change. However there have been a lot of changes to the functionality of the dialog itself, especially in Acrobat 9, it's possible something there has required this focus change. However currently we need to change the focus ourselves in order to scroll through the files in the way you describe.
There's also a bug report form if you want to report this directly to Adobe http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Output Preview crash when open, while opening PDF

I've got a problem with Acrobat 10.1.12 on a Mid 2012 MacPro Quad-Core running OSX 10.9.5 (same on Late 2013 MacPro Six-Core)
When I open a PDF with Output Preview open and point an click on an object to measure it, Acrobat crashes. Same with more than 3 PDF open on the 2013 MacPro.
The only way to work around is to reopen Output Preview before clicking into the document, which isn't a proper solution with up to 150 PDF to check every day.
Things i've tried so far:
OSX and Acrobat (installed Plugin is PitStop Pro 11) clean install
clear the whole Suitcase to avoid font problems
I'm thankful for any suggestion.

Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291

Invoice printing output preview is not displaying anymore.

Hello
The user have invoices where you cannot click the issue output preview. Before the 9th of january everything was fine, he said all he did was transport 2 things.
1. made the field of payment term mandatory instead of it being optional.
2. Added new payment terms, about 5 or 6 new ones.
He says on the 10th of january he started seeing this problem. Also, the accounting document is not being created for those invoices after the 9th of january. Before 9th , there were no problems.
Any ideas or solutions.
Thanks in advance

Hi
Use Tcode VFX3 and try to release the documents and advise the error as to why the the accounting documents are not being generated
Anurag

Updating Output Preview window

Hello. I have a problem with output preview window. I found the thread with the same question: How to update Output Preview window? . But there are no answers. May be anybody can answer now.
Thank you.

I sent "PDPageNotifyContentsDidChange" notification. It helps to show new element with this colorant in document, but not in OP window.
It is very srange behavior. If you open OP window after adding colorant, OP window show it. If change Simulation Profile from CMYK to RGB (or RGB to CMYK or GS ets.) new colorant will appeared. Workaround: Maybe it posible to change this profile programmatically?
If you open OP window then change in preferences default working space and then open OP window again Simulation Profile won't be changed.

Apply Layer Overrides Option and Output Preview

Recently I found a problem when using apply layer overrides and output preview options.
If I open a layered document and apply layer overrides. Then go to output preview under print production menu, all the content in my hidden layer shows up. I know that the "apply layer overrides" command resets the settings for all layers including hidden ones. Just wondering if it's possible to not show layer content when doing output preview? or is it possible to disable the "apply layer overrides" option?
Thanks

See if clicking Reset All Warning Dialogs at the bottom of Photoshop>Preferences>General resolves the issue.

Output Preview Problem

Similar Messages

Maybe you are looking for