Disable servlet autodeploy in nostage mode

We're running Weblogic 8.1 SP5 on Solaris. The documentation for staging mode nostage includes the following:
 
"With nostage deployments of exploded archive directories, WebLogic Server automatically detects changes to a deployment's JSPs or Servlets and refreshes the deployment. (This behavior can be disabled if necessary.)"
 
Questions: 
1) How does one disable the behavior (Note: We tested and the behavior exists by default in both Production and Development modes)?
 
2) Is there any way to disable auto-refresh for Servlets but not JSP?

I believe you should be able to set servlet-reload-check-seconds to -1 and set the JSP reload parameter to something else.
See:
http://e-docs.bea.com/wls/docs81/webapp/weblogic_xml.html
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Similar Messages

Deploy applications thru autodeploy in production mode in Weblogic 10

In Weblogic 10, we can deploy applications though autodeploy in development mode. But now I need to deploy my applications in production mode. Iam very much convenient using autodeploy. Can I use this autodeploy in production mode..?..Any alternative..?
Will there be any problems If I deploy things thru autodeploy in production mode..?
Please help..
Thanks.

Kumar_Spore <> wrote:
In Weblogic 10, we can deploy applications though autodeploy in
development mode. But now I need to deploy my applications in production
mode. Iam very much convenient using autodeploy. Can I use this autodeploy
in production mode..?..Any alternative..? Will there be any problems If I
deploy things thru autodeploy in production mode..? Please help.. Thanks.Hi,
As far as I know, the autodeploy will not work as soon as your weblogic
instance is in production mode.
And this mostly for 'security' reasons.
Imagine that you have an application running in production, you don't want
to deploy something 'unplanned' or allow mistakes by administrators. And
with autodeploy you can easily copy something wrong.
B
Schelstraete Bart
[email protected]
http://www.schelstraete.org

Disable servlet reload

 I need to disable servlet reload(WLS 7 SP4) for performance reason. I set the
 servlet-reload-check-secs to -1 in the container-descriptor of the web.xml of
 my war file. However when I deploy my war file, from the admin console the "Reload
 Period" is set to 1. Is there a way to make the deployment set the default "Reload
 Period" to -1 during deployment? I hate to deploy, change "Reload Period" from
 console, shutdown server, them restart server. Thanks.


Daniel Lo wrote:
 > I need to disable servlet reload(WLS 7 SP4) for performance reason. I set the
 > servlet-reload-check-secs to -1 in the container-descriptor of the web.xml of
 > my war file. However when I deploy my war file, from the admin console the "Reload
 > Period" is set to 1. Is there a way to make the deployment set the default "Reload
 > Period" to -1 during deployment? I hate to deploy, change "Reload Period" from
 > console, shutdown server, them restart server. Thanks.
 You can use the following in your web.xml
 <context-param>
 <param-name>weblogic.servlet.reloadCheckSecs</param-name>
 <param-value>-1</param-value>
 </context-param>
 Nagesh

How to disable dock in full screen mode?

Hi, every time im full screen the dock are bugging me. Exemple, when i'm on Facebook on Google Chrome in full screen and I want to write something in the chat, the dock pop-up. Is there a way to disable dock when i'm in full screen mode? I'm on a MBP mid 2012 running Maverick.
Thanks you!

Alternatively you can use the same principle anywhere on the screen, you do not have to scroll to the bottom. Simply move the cursor to the screen edge where your dock is then move the cursor the same direction again. You do have to briefly pause between the two movements but you can do this anywhere the dock is located, it does not have to be at one position on the screen. That should speed things up a bit and prevents the dock from appearing by inadvertently scrolling to the side or the bottom.
If you can, get a Magic Trackpad, Lion navigation works very well with one of these, I think that the days of the mouse are numbered. The numbers of gestures available with the Magic Trackpad is extensive in Lion.

OVCD: Disabling toolbar in full screen mode

I use OVCD from my macbook pro in fullscreen mode.
Every time I hover close to the bottom to switch Solaris windows this toolbar pops out.
Is there a way to completely disable the toolbar?

Figured this one out myself. Apparently if you move your cursor to the top of the screen in full screen mode the toolbar drops down. Then there's a little lock symbol you can click to make it stay down. Basically it works like the launch bar on the desktop.
Thanks self!

Possible to disable closed clamshell (display closed) mode?

I would like to disable the closed clamshell (display closed) mode on my MBP, where you can run the computer with its lid closed if it's attached to an external monitor. I don't ever do this (I use the MBP screen as a second monitor), and this option causes my computer to randomly wake up if I turn off/on my office lights, or accidentally press a button on my usb keyboard or mouse.
I know there is no option to turn this off in the System Preferences, but is there a terminal hack that can do this?
Thanks!

If I understand you correctly, you don't close your display (because you use it as a second monitor) and sometimes you put the machine to sleep with its display open. But turning your office lights on or off wakes the computer from sleep (which certainly indicates an electrical problem in the office wiring or lighting, and one that can't be good for your computer). And of course hitting any key on the keyboard wakes the computer too, exactly as it's supposed to do. If I understand all this correctly, what if anything does it have to do with clamshell mode, and what particular aspect(s) of clamshell mode do you think you need to disable, and why?
While you're thinking that over, I recommend connecting your computer's AC adapter to a high-quality surge protector or an uninterruptible power supply that features power filtering.

Disabling Log_Archive_Start in Archive Log Mode

Guys,
I have a Database running in Archive Log mode.
I have a situation where in I have to do bunch of bulk updates for which I dont want any logs generated.
sO I was thinking to set the intialization parameter log_archive_start to false before I run the DML updates
ALTER SYSTEM SET log_archive_start = false
after the DML is run I will turn it back on
ALTER SYSTEM SET log_archive_start = True
Do you think if this is the right to go about or would I have to switch from Archive Log Mode to No Archive Log Mode
run the DML update and then switch back to Archive Log Mode
Any comments/suggestions/inputs woo

Hello,
I would use some other way to get a full nologing behaviour.
First, ensure your tablespace is in force logging mode.
ALTER TABLESPACE data FORCE LOGGING NOLOGGING;
ALTER TABLESPACE index FORCE LOGGING NOLOGGING;
This will ensure that you're usually logging.
Set all tables/indexes to be nologging
BEGIN
FOR vRes IN (SELECT OWNER,TABLE_NAME FROM DBA_TABLES WHERE TABLESPACE_NAME='data')
LOOP
EXECUTE IMMEDIATE 'ALTER TABLE ' || vRes.OWNER || '.' || vRes.TABLE_NAME ' NOLOGGING';
END LOOP;
END;
Do even for indexes.
From now on, when you want to do your huge amount of updates/... targetting objects in tablespaces data and index, jou just have to:
ALTER TABLESPACE data NO FORCE LOGGING;
ALTER TABLESPACE indexes NO FORCE LOGGING;
- Your DML
ALTER TABLESPACE data FORCE LOGGING;
ALTER TABLESPACE indexes FORCE LOGGING.
4 commands to disable logging for every object in the tablespace.
Beware, when in NOLOGGING mode, you won't be able to "RECOVER" any of the tables. Thiis is not crash-friendly, but you'll have no redo info generated, which is what you require.
Regards,
Yoann.

Disable column when in edit mode.

Hallo,
I want the user to be able to input data in some columns of my ALV Grid, but not in all. How can I disable some columns for input, when the ALV Grid is in Input/Edit mode?
Thank you,
Manuel

Hi,
Step 1.
Add this feild in ur Internal table.
field_style TYPE lvc_t_styl, "FOR DISABLE
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-no_input          = 'X'.
gd_layout-cwidth_opt = 'X'.
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
gd_layout-info_fname = 'LINE_COL'.
ENDFORM. " BUILD_LAYOUT
*step-2 * Call this Subroutine before Fieldcatalog........
FORM set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
clear : ls_stylerow.
clear : wa_final-field_style.
refresh WA_FINAL-FIELD_STYLE[].
Populate style variable (FIELD_STYLE) with style properties
The following code sets it to be disabled(display only)
if child deal Ticket Number Approved or rejected.
LOOP AT it_final INTO wa_final.
    IF wa_final-apprd = 'X' or wa_final-rejct = 'X'.
        ls_stylerow-fieldname = 'APPRD' .
        ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
        APPEND ls_stylerow TO wa_final-field_style.
        MODIFY it_final FROM wa_final.   "my Internal table, Replace ur internal table.
        ls_stylerow-fieldname = 'REJCT' .    " ur field name
        ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
        APPEND ls_stylerow TO wa_final-field_style.
        MODIFY it_final FROM wa_final.
   endif.
like this u have to add for all colunms in ur report which u
want to disable.
Note the stylerow appending should be in Alphabetic order
ENDLOOP.
ENDFORM. " set_specific_field_attributes
Thanx
bgan.

Slow scrolling with all add-ons and extensions disabled, but OK is safe mode

I have a page for work, with a lot of links, that scrolls very slowly, with a choppy action. It is the same with all add-ons and extensions disabled. But when restarted in safe mode, the scrolling is OK.
What else does the safe mode block? Or what could be the problem.

In Firefox 4 and later Safe mode disables extensions and disables hardware acceleration.
*http://kb.mozillazine.org/Safe_mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Firefox slow wireless but fast wired. No issues running IE wireless. Tried system restore, fact. reset, turned off accl, disabled addons, run in safe mode.....

So i have an HP e118dx running on windows 8.1 with very little software on it. Currently running FF 37.0.1 and in wireless mode it always hangs up, runs slow, or times out. When plugged in it runs just fine. Can get on net using IE via wireless and no issues. So it seems to be something specific to FF on the wireless side. Thought it might have been my wireless card but running IE just fine seems to rule that out.
Have already tried system restore a few times, factory reset, turn off hardware accel., run in safe mode(FF), disabled add ons and nothing seems to help. If i have tabs open while wired, then go wireless and refresh the pages or browse on the already open pages i tend to get a couple minutes of trouble free experience before it slows to a halt again.
To recap....FF on wireless=slow and wired=fast. No difference when using IE wireless---always fast.

Not sure what you mean by # of connections being made. Not sure if that means tabs open, or folks using the actual wireless network. A while back when i was going through this with the isp i got a crash coarse on how to go into the modem and check a bunch of different stuff, as well as reset things. When looking in there only 1 or 2 computers showed on the network. The network is password protected......i guess protected only to the extent that a pswrd can. Not certain if someone nefariously connected somehow.....didn't show up when looking for users on the network though.
The first bullet point......Not sure how to do any of that so i'd say no.
Second bullet point......Yes, did lots of clearing temp files, caches, history, etc. along with systems restores and factory resets. although not exactly sure what you mean by dns cache. Might have done this but don't recall specifically seeing that.
Third bullet point.....It doesn't make any difference on this end whether its on no proxy, auto proxy, manual proxy. While i have no idea what all this stuff does/affects performance i played with it on all different settings and nothing changed here. Put it back to no proxy.
The thing is even when my wireless FF is acting up other devices in the home can be on the wireless with no issues. Think the other devices are using Chrome and some phone wifi hookup. Keep in mind if i switch to IE on the same device with FF windows open the IE will run just fine. At any given time there should only be 1-4 devices on the network so i'm guessing that shouldn't overload anything. Besides none of the other devices ever seem to come into this issue.
There always seems to be some issue that pops up after updates. Can't ever just leave working things alone.

Disable Email Alerts in Vibrate Mode?

Hi. Is this possible? I've searched various forums and haven't come up with anything...
I've disabled all my messages alerts:
> Volume - Silent
> LED - Off
> Vibration - Off ... And I also tried Vibration - Custom, In Holster Only
Everything works fine when I have normal ringing enabled - no email or other messages alerts. However if I go to vibrate mode, I get a double vibrate alert for every email, in or out of the holster...
Can this be turned off?
Thanks in advance.

You, I assume, have gone into the Sound Profile Options and set custom profiles for each of your email addresses. That should be available on your Tour.
Although I have a Storm 9530 you should have much the same alert options. I willl admit it took some small degree of tinkering with the options combinations before I got it to work as I wanted. I set custom profiles but when I want NO notification either vibrate or or tone, I turn the tone to Silent and LED and Vibration to Off and it works.
Set Ring TonesAlerts>Messages>(email listings) options to set by email address you have established the Ringtone/Volume, LED, Vibration and Notification options and you still get vibrations although you have set to either off totally or a lower count?
I have customized all four of my email addresses as to ringtone, LED and vibration profiles and can override the ringtone by opting for sounds off except for calls which takes precedence over the ringtone setting. All other customization works flawlessly.
Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
If there is a Theme on my Blackberry, Hedone it!
If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
If your issue has been solved, please mark the post that solved it for you!

IPod touch disabled, cannot get into recovery mode or unlock to enter passcode.

I've got an 8GB iPod touch that is disabled, cannot be unlocked, and it will not go into recovery mode. When I plug it into iTunes, it says "iTunes could not connect to the iPod touch because it is locked with a passcode. You must enter your passcode on the iPod touch before it can be used with iTunes." At the top is a red banner that says "iPod is disabled connect to iTunes" and it won't let me unlock it to enter a passcode and I've tried the recovery mode where you plug it in when powered off holding the home button, but I guess the iPod isn't updated enough for it to work (doesn't look like the new Apple OS) because when I do that, it just powers on like normal. What do I need to do because I'm definitely at a stopping point. Please help me get this iPod into working condition.

Try Recovery Mode again. Timing is critical so it may not have been done correctly the first time. Detailed instructions at: http://support.apple.com/kb/HT1808.

Disable dim effect in Isolation Mode???

Groups are an excellent way to design encapsulated objects, but when editing color in Isolation Mode all other groups/layers are desaturated which makes it impossible to edit color in respect to the entire illustration.
I'd expect a way to disable the dimming effect somewhere in a menu option or preference setting. Anyone know?

There's a valid case for this I think. Having isolation mode without dimming would be useful for editing the colours of objects which are only partly obscured by foreground objects but which for various reasons may have their entire selectable region covered. For example you might have background stripes on a view and want to custom colour them with all of the foreground present (my current dilemma).
Of course you can use the layers panel but isolation would be more convenient. Locking is an option too of course but I have certain objects I lock all the time and manually locking everything would obscure my normal working state when I go to remove the temporary locks. Isolation mode solves this more elegantly.
I also find when editing shapes, I often wish to be able to see them in their proper colour context too.
Maybe what's needed is a addition to the layers panel: A "solo" mode.

Ipod touch (4th gen) is disabled and stuck on "recovery mode" and i keep reciving "error 3259" connetion time out when i restore. what should i do?

hello, i left my ipod touch connected overnight to my playstation3 to charge and the next morning i woke up to find the ipod disabled. i put it on recovery mode and tried to restore it, but everytime itunes downloads the file, a windows pop-up appears saying "network connection timed out error 3259" and now my ipod is stuck on recovery mode. what should i do ?

You posted in the iPad forum instead of the iPod forum. I'll request that Apple move your post.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
 Cheers, Tom

Disable password for privileged Exec mode via Telnet

I've looked around for an answer for this specific issue but haven't been able to find one yet. Hoping this is easy and someone can point me in the right direction.
When logging into a 2950 switch via Telnet, I'm prompted for a password when attempting to "enable" privileged mode. I want to disable the password requirement for now (home lab, not production). When I initiate the "no enable password" or "no enable secret" command (via a console connection), and try to initiate the enable command, I receive the message "% No password set". If I now attempt to enable privileged mode from the console, I'm not asked for a password. How can I disable the password prompt for VTY mode?
Thanks!

Thanks for the suggestion; I've tried it but am still asked for a password.
From global config, I entered:
line vty 0 15
privilege level 15
exit
Am I missing any steps there?
Thanks!

Disable servlet autodeploy in nostage mode

Similar Messages

Maybe you are looking for