Disable the need of the function key when using the control key

I'm often using the F1-12 keys when using an IDE for developing. Those IDE's use the CTR+F1-12 shortcuts quite a bit and it's always needed to use FN+CTR+F1-12 which is ridiculous and redundant. Is there a way to keep using the functions assigned to F1-12 (Adjust volume, brightness...) without pressing the function key and be able of using CTR or ALT +F1-12 without the need of pressing the function key?

According to the system help text it is possible. And for me it works as described in the help text on my MacBook Pro.
But on my Mac Pro (late 2013) the relevant control (“Use all F1, F2, etc. keys as standard function keys”) is missing form System Preferences >> Keyboard >> Keyboard.
From the help text for the topic "Use keyboard function keys:"
If you frequently use the alternate function of a function key, you can switch the keyboard so that the function keys perform the alternate function without your pressing Fn. You then hold down Fn to use a function key’s original hardware control function. If your keyboard doesn’t have an Fn key, try holding down the Control key.
Choose Apple menu > System Preferences, then click Keyboard.
Open Keyboard preferences
Select the “Use all F1, F2, etc. keys as standard function keys” checkbox.

Similar Messages

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

Does the quadrangle's amount be limited when using the IndexedQuadArray?

Dear all,
I use IndexedQuadArray to describe a 3d's surface which is composed of thousands of quadrangle. When the quadrangle's amount is larger than 60000,the JVM is crashed with the following information:
+++++++++++++++++++++++
An unexpected error has been detected by Java Runtime Environment:
SIGSEGV(0xb) at pc=0x000000000dbefebb, ...
Java VM: Java HotSpot(TM) 64-Bit SErver VM(11.3-b02 mixed mode linux-amd64)
Problematic frame:
C [i965_dri.so + 0x31ebb]
The crash happened outside the Java Virtual Machine in native code.
See Problem ...
++++++++++++++++++++++++++++++++++
But when the amount is not larger then 60000, everything is ok.
My os is: 2.6.26.8-57.fc8, Redhat fedora 8, x86_64
J2SE : 1.6.0_13-b03
Java3D: 1.5.2
thanks

That's a computer problem. Your computer can't handle an amount larger than 60000. I had a similar problem.

Slow down the Creative Entertainment Center Fast Foreward when using the X-FI Remo

Hello,
When watching videos on my computer using the?Creative Entertainment?Center app and the remote with my X-FI SoundBlaster card the fast forward goes from zero to ludicrous speed instantly. I usually end up fast forwarding half way through the file without intending to. Is there a setting or registry or any other adjustment I can use to slow this down to a sane level? A 30 second skip for instance would be wonderful!
Thanks!

Creative doesnt seem to hav plans to release Entertainment center for Audigy 2 ZS. But theres a way to install and use Entertainment center with AUDIGY 2 ZS Platinum/Pro. I first installed the Audigy 4 Modded PAX drivers for Audigy2 ZS with all softwares(i downloaded Audigy 4 ISO) , Then i uninstalled the drivers and reinstalled Audigy 2 ZS drivers , and again installed Entertainment Center, Guess what now Audigy 4 doesnt prompt me that i dont have the required HARD WARE before installation starts, and i can install ny Audigy 4 software(nothing much new though , only Entertainment center and Smart Recorder). and i am now enjoying Entertainment CENTER with my Audigy 2 ZS Platinum Pro and with Audigy 2 drivers!!!!.
I think its not proper on part of CREATIVE not to release Ent. Center for Audigy 2, as the IO box and remote control of Audigy 2 and Audigy 4 are the same( RM-500 remote). so wats the point in keeping Ent. Center just for Audigy 4 and Up?
BELOW IS MY ANALYSIS OF ENTERTAINMENT CENTER, just giving the pros and cons so that Audigy 2 Platinum/Pro Users can decide whether its GOOD or NOT
On the PLUS SIDE
+ it has nice interface
+ Good handling of playlists
+DVD Playback
+Slideshow and presentation support
On the NEAGATIVE SIDE
- Every time u want to perform PAUSE, NEXT TRACK, PREVIOUS TRACK operations the Ent. Center pops up as a FULL screen app. interupting u r current TASK
- Also it is not integrated with MEDIA SOURCE Player,(i.e when u start playing song with ent. center it doesnt get layed with MEDIASOURCE so not DTS Neo:6 Playback!!!)
-Even the Press of CMSS button takes u to the full screen app. again causing INTERRUPTION!!!!!
- Doesn't Have a SEARCH option to search for tracks from thee Library
- No BASS/TREBLE/BALANCE Control thru. it
Message Edited by nvpower on 09-30-2005 06:39 PM

I have a LaserJet Pro P1606dn - the second page prints upside down when using the duplex print optio

Operating system Windows 7 32 bit. I have re-installed the printer an I have downloaded and applied the most recent drivers from the HP site. The built in set-up shows the settings correctly as duplex on and bind on the long edge but the second page continues to print upside down i.e. it seems to always print as binding on the top edge.
However when I print from my iPad via Airprint the duplex print works perfectly!

IF you are using a printer with 2-sided printing, in the expanded print dialog you will have a selection for long-edge binding OR short-edge binding. Whichever setting you have set, switch to the other one.
Walt

What should the Master Clock be set to when using the Rode NT-USB Microphone? (Audition)

Re: Adobe Audition
Just received a Rode NT-USB and curious as to what Master Clock is and what it should be set to in Audtion CC for the NT-USB mic under Preferences > Audio Hardware.
*I do not see an Audition Support Forum, reason for posting in PP CC.

It's listed in the "Communities" box to the right side of the PrPro "Overview" tab page ...
Audition CS5.5, CS6 & CC
Neil

Significant delay when using the "tap to click" trackpad function

(I accidently post this in the wrong forum -- for the old MBP -- so this is a repost)
Hello everyone! I bought a 2.4 Ghz unibody MBP like 3 weeks ago. I had an issue and they replaced the computer with a new one at the store. Today is the first day of using the new laptop. They switched out the ram upgrade and the hard drive.
The issue seems to be that when using the tap to click function on the trackpad, there is a relatively significant delay (at least for a click). With the regular mouse button the delay isn't there. Such as if I'm clicking on the finder or the file tab, there's a bit of a delay before they pop up, compared to instantaniously with the mouse button. When using the trackpad for regular types of tasks, there is a bit of a delay sometimes too. Such as I'll be moving the mouse across the screen and it will stop.
Please help me out. If I could solve it without going back to the Apple store that would be great. Thanks everyone in advance.

Update: I think the 1/2 second delay is too long of an estimate, but the delay is significant enough to make me notice something has to be wrong. My previous MBP had no delay.
When moving the mouse around, I'm not sure if it's a MBP issue, but occasionally the mouse seems to "get stuck" on the screen and I have to begin moving my finger again on the trackpad. This happened on the first MBP too.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

When using the Pencil, I need to be able to draw an organic dotted line, but there is a shortcut in place that connects the dots because I'm double clicking. How do I get rid of this shortcut?

When using the Pencil, I need to be able to draw an organic dotted line, but there is a shortcut in place that connects the dots because I'm double clicking. How do I get rid of this shortcut?

What is the purpose of the double click? If you click once to deposit each mark in sequence the dots should not join. However, if you click once to create the first mark, then hold down the Shift key, each subsequent mark with the Shift key held down will join the dots and create a line.

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

What version of iPhoto do you have?
iPhoto Upgrade under Mavericks see post by Old Toad

HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

Disable the need of the function key when using the control key

Similar Messages

Maybe you are looking for