Disabled iPad, cannot restore via iTunes

Hello there.
My iPad is disabled after too many incorrect passcode attempts. I've tried to restore it via iTunes like as shown on an apple help page but it isn't working. Ipad says connect to iTunes, iTunes says it can't do anything because of the wrong passcode. Have logged into iCloud, gone onto the find my phone thing but device is offline.
Can't seem to work out what to do and feeling frazzled.
Thanks in advance.

Hello ChazzaTron
Have you tried putting your iPad into recovery mode and then restoring in iTunes? Check out the articles below to go through resolving the issue. You should still be able to remove Activation Lock from icloud.com in the Find My iPhone section.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Regards,
-Norm G. 

Similar Messages

  • HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

    Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

    Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

  • HT201210 I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    I attempted to install iOS 7.0.2 on my iPad (3rd gen).  The screen has frozen.  Have tried resetting and restoring (via iTunes).  Error mssg says that my iPad cannot be restored.  Now what do I do?

    Hi there hhcd92!
    I have an article here for you that can help guide you through troubleshooting this situation:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My iphone 6 is disabled because of incorrect passcode but my apple account isn't activated yet so I cannot reset via itunes

    My iphone 6 is disabled because of incorrect passcode and i cannot reset via itunes because i have not yet activated my apple account.

    +Do a DFU recovery:+
    +1. Open iTunes.+
    +2. Connect the iPhone+
    +3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
    +4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
    +5. Follow the prompts to restore the iPhone.+
    If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.

  • I disabled my iPhone 4 and while doing a restore via iTunes,  it is downloading and timing out so the download is not completing. any idea how to get past that?  I have tried many times and the same error keeps happening.

    I disabled my iPhone 4 and while doing a restore via iTunes,  it is downloading and timing out so the download is not completing. any idea how to get past that?  I have tried many times and the same error keeps happening.

    You need to force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/ht1808
    Sorry, you've already lost all data on your phone.

  • Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

    Phone is locked/disabled (cannot remember passcode) but cannot restore becasue itunes says i need to turn off find my phone on icloud but i can't get into my phone to do that, HELP

    Follow the directions here to force the phone into recovery mode & restore it:
    http://support.apple.com/kb/HT1808
    This will remove the passcode.

  • Ipod disabled and cannot restore

    my sons ipod has been disabled since he forgot his passcode.  he has only had it a few days and we have not got as far as syncing it with our itunes account.
    i have tried restoring after following some instructions online but to no avail.  please help!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

    I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

    Exactly what do you mean by a 'downloader'?
    Thanks
    Pete

  • My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

    my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

    If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
    To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
    1) press and hold the power button until you see the slide to power off option
    2) swipe to power off
    3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
    4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
    If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
    If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
    Hope this helps.
    Cheers.

  • Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    Have an iPod touch 4th gen.  It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing.  I have restored via iTunes and reset all the settings.  Any suggestions?

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • I RECEIVED AN ERROR MESSAGE THAT I COULD NOT MAKE OR RECEIVE CALLS AND I HAD TO RESTORE VIA ITUNES.  I HAVE DONE SO AND LOST LOADS OF APPS ETC (MY FAULT FOR NOTBACKING UP) BUT STILL UNABLE TO MAKE OR RECEIVE CALLS.

    Phone is only a few months old and was working fine last night - it ran out of battery but on being charged up this morning it was effectively locked.  I received an error message that I could not make or receive calls and I had to restore via itunes.  I have done so and lost loads of apps etc (my fault for not backing up) but still unable to make or receive calls.  Anyone had anything similar and can advise who I should contact or what I can do.
    Thanks,

    try contacting your carrier and see whats going on.

  • IPad cannot repair by ITune (error code 9)

    IPad cannot repair by ITune (error code 9)

    Error 9 may be due to problems with the security software on your computer interfering with iTunes.
    See here for help on fixing this: http://support.apple.com/kb/ts3694

  • I have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me

    i have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me.is there any software to reset it

    Hello adifromba
    Try putting your iPod Classic into Disk Mode to force a restore within iTunes to get it to show up. The steps to do that are within the first article below, I have also provided a second article for further troubleshooting if it continues to not show up.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/TS1410
    Regards,
    -Norm G.

  • HT4623 have just ugraded IPhone 5 to I07.  My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect.  Any suggestions.  I cannot restore on itunes cant turn off the find my iPhone..

    I have just ugraded IPhone 5 to I07.  My passcode is not being recognised, also whir I connect to the computer the message is that the cable is incorrect.  Any suggestions.  I cannot restore on itunes cant turn off the find my iPhone..

    From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.

Maybe you are looking for

  • Error 13 = Blue Screen of Death?

    Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther. I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load

  • How to capture the Filename Dynamically in BPM

    Hi All, My scenario is FileBPMFile and my target end should get the same file name as source file name. If suppose it is simple File to File we can use set attributes option to get the same filename. But if BPM comes into Middle will it be managed if

  • ICal calendars keep disappearing

    I maintain identical calendars on both of my computers, keeping them synched via .Mac. Recently all of the calendars disappeared. Events and To Does appeared for the current month, but I was unable to change between months. Soon the whole thing quit

  • /boot Partiton on One Flash Drive, Multiple Arch Installs

    I have read some people have done this, but I have yet to find clear guidance on the topic from perusing BBS (maybe I cannot find the right thread) or the Arch Wiki, but if I wanted to put boot on a flash drive, and have that flash drive handle diffe

  • VPD Question

    Hi all, I have a technical question about VPD. The documentation says, VPD is working the following way: When a user issues a statement, the statement is automaticly rewritten. This is done by appending a predicate delivered by a pl/sql function to t