Disabling the text box

I have three text box.depending on the value entered in the first,i have to hide the third text box.can anyone help me

You can do it with Javascript.
This is to the head of page.
<script>
function func() {
   if (document.form1.textbox1.value=="something") {
      document.form1.textbox2.disabled=true;
</script>...and its in the body part.
<form action="..."  name="form1">
<input type="text" name="textbox1" onclick="func()"/>
<input type="text" name="textbox2"/>
<input type="text" name="textbox3"/>
...I hope this helps.

Similar Messages

  • This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

    This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

    See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

  • How do I stop Firefox from Zooming to Fill the entire Width of the screen with the Text Box?

    In Portrait mode the zoom facture / percentage performed may not be as significant or frustrating. However in landscape mode zooming the text box to fill the width of the screen is ridiculous. It makes the box huge & sometimes impossible to see / read what is needed in subsequent form text boxes.
    In Landscape mode this sets in motion a necessity to zoom out following the competion of typing in every single text box. (Just try to fill out a form & see if you don't feel like cursing. In Landscape mode especially, I zoom to see what I want to see. I don't want firefox to undo my zooming action!
    Is it possible to dissable this auto zooming in the settings? Or is it possible to suggest this change be added to future updates?

    See if disabling this improves the experience:
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # Look for find.helperautozoom I think it is called

  • Why is there always the text of an old message in the text box every time I go to write a new message?

    For the last three days, when I go to write a new text/iMessage, there is the text of a message I sent recently in the text box. I've tried everything to get rid of it, but nothing seems to work... each time I go to write a new message, there's the same old text again. does anyone know why this is happening - and what I can do to erase it and get back to a good old blank text box? Thanks for your help!

    If the login box keeps popping up either your acct is disabled or you are mistyping your pw.  
    Go here and try out your pw and reset if necessary:
    http://appleid.apple.com/
    Click on Manage ID and go from there.

  • In iWork Pages 5.1, how do I eliminate "text" in the Text Box?

    In iWork Pages 5.1, how do I eliminate the word "text" which appears in the Text Box, when I've used a color filler and no words?

    Select the text and delete.
    If you don't want text in the box, don't use a text box ie in Shapes there are various shapes. Select one without 'T'.

  • When converting word doc to pdf, my images with text only show the background color of the text box.

    I have a word doc that I am trying to conver to pdf.  I have jpegs with text boxes on top of them on one page.  It looks great on the screen but after I convert to pdf, the text boxes only have half the text, the first half of the text box is just white - the background color.  If I take the background color out of the text box, the text converts over fine but I need the background color.
    I have tried many things here on the print settings, standard, high quality print, unchecking the compression on the images.  Any help?

    Thank you for your posting. These forums are specific to the
    Acrobat.com website and it's set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • Can you no longer have a background color for the text box in the new version of hp photo creations

    just updated to the new version of HP Photo Creations, used to be able to have a colored background for the text box - is that no longer possible in this new (not better) version????!!!!! Uuuuuuuuuugh

    Hi Lainey.
    Thanks for asking. We're working on bringing back that feature. In the meantime, here's another way to add text backgrounds: Add a placeable graphic and then click the Arrange button to send it to the back, behind the text.
    That approach also gives you more interesting shapes. The new alignment guides make it a snap to align a graphic with a text box. In the example below (it may take a day for the image to show up here), I also used the new Premium Editing Features to change the color of the graphic.
    P.S. — Applying a thick border to an empty text box (also using the Premium Editing Features) is another way to create a background shape. That has the advantage of letting you pick any color for the box. You'll also find several new text styles at the bottom of the new text menu.
    Let us know if we can help further,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How do I Expand the Text Box in Mail Stationery?

    I have a question about using stationery in Mail. Is there anything I can do to make the text box in certain templates to hold more content? It seems that, in some templates (like Bamboo, for example), the text box expands automatically as more content is keyed in. Yet, in the Tack Board template, for example, the text box does not expand beyond what seems to be a fixed length for content. How can I get the text box in Tack Board to expand for additional content?

    Please check text input state defined , also if the form is inserted in any container then try to test out the form with different text input boxes in a new page.
    Additionally , check the mid-hieght of text inserted in frame.
    Thanks,
    Sanjit

  • I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there.  What am I doing wrong?

    Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking.  Filters are basically ignored by the tracker.  Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker.  Did you change the timing after doing the tracking?  If so this would also require you to re-track the shot.  Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
    Cheers!

  • How do I add text to a photo when making a calendar from iPhoto?  I see the text box for the dates but not for the actual photo...thanks.

    I can't find a way to add text to a photo once it's been put into the top pane of the calendar month...is there a way to do this since I'd like to add a descriptor to the photos?  I see the text box when you click on the calendar date, but don't find one for the photo pane.  Thanks for any assistance.

    Right - you can not add text to photos with iPhoto - you must use an external editor
    LN

  • Can you expand the text boxes in iCal?

    I downloaded a few sports team schedules to my iCal, but when I print out the monthly calendar only a small part of the text shows up. For example, the school and time show up, but not the opponent and venue. Is there a way to expand the text boxes so the full text shows up? There is plenty of white space on each day. Thanks!

    No - you can do pages in other programs and use them
    LN

  • How to set to bold a single word in the text box?

    How can I set to bold a single word in the text box? When I try, it puts the whole text bold.

    you should do this by HTML way
    like this :
    sym.$("your text box Name").html("Hello i'm <strong>Bold</strong> one")
    Zaxist

  • How to use a radio button in enabling/disabling a text box in report progra

    Hi,
        Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

    *& Report  ZMR_RADIO_BUTTONS
    REPORT  ZMR_RADIO_BUTTONS.
    PARAMETERS : R1  RADIOBUTTON GROUP G1,
                 R2  RADIOBUTTON GROUP G1.
    PARAMETERS : A1 TYPE I,
                 A2 TYPE I.
    AT SELECTION-SCREEN OUTPUT.
    *initialization.
    IF R1 = 'X'.
    LOOP AT SCREEN.
    IF SCREEN-NAME = 'A1'.
       SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 0.
    ENDIF.
    IF SCREEN-NAME = 'A2'.
       SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
    ENDIF.
    ENDLOOP.
    ENDIF.
    IF R2 = 'X'.
    LOOP AT SCREEN.
    IF SCREEN-NAME = 'A1'.
       SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 1.
    ENDIF.
    IF SCREEN-NAME = 'A2'.
       SCREEN-INPUT = 0.
        SCREEN-ACTIVE = 0.
    ENDIF.
    modify screen.
    ENDLOOP.
    ENDIF.
    START-OF-SELECTION.
    *IF R1 = 'X'.
    *LOOP AT SCREEN.
    IF SCREEN-NAME = 'A1'.
       SCREEN-INPUT = 0.
       SCREEN-ACTIVE = 1.
    ENDIF.
    *ENDLOOP.
    *ENDIF.
    *IF R2 = 'X'.
    *LOOP AT SCREEN.
    IF SCREEN-NAME = 'A2'.
       SCREEN-INPUT = 0.
       SCREEN-ACTIVE = 0.
    ENDIF.
    *ENDLOOP.
    *ENDIF.

  • Is there a way to annotate a PDF by adding a text box any where on the screen rather than having to click on the text box Icon each time? It was like this before I downloaded Yosemite.

    I use the Preview app to annotate my notes for class. It use to be where I could add text where ever I wanted on the screen just by double clicking. Now since I downloaded Yosemite I have to click on the text box icon at the top each time and it adds the text box in the middle and I have to move it to where I want it. This is very inconvenient for class. Any suggestions on how to get the old preview back or fix this problem?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Please someone has to know how to delate the text box and not the word or the page

    HI
    someone has to help i am trying to make a wedding invites on word but we dont want the text box how do you get rid off it with out dealeting the page.
    What is a good progame to use to created wedding invites?

    Then you should probably post your question on the Microsoft Mac forums since it's their software you have questions about...
    http://answers.microsoft.com/en-us/mac

Maybe you are looking for

  • Dreamweaver closing when split view selected

    I'm seeking assistance with the following issue: I been using Dreamweaver MX 2004 for 2 years and now whenever I click on split view to view a file the application closes automatically without any warning. This is a recent occurance. The only modific

  • Zen Vision:M and Album Art

    So I know it has album art and I should be happy about, and I am. But I wish I could zoom in! Has anyone found a way, or is there a hack! Please do tell?

  • Oracle to Excel

    What options are available for getting data from Oracle to Excel ? I can think of two, but I'm sure there must be alternatives using XML etc ? 1) MS Query is a tool within Excel, that pulls the data across using ODBC via a query that you construct fr

  • H-REAP experiences

    Hello everybody! For budget reasons, I am planning to deploy a Wireless solution over the WAN using H-REAP, my topology will be: * WLC 5508-50 in the main Site * 03 Remotes Sites : (5) AP 1141 each/site * WAN Remote:      MPLS-VPN Bw:1024,  RTT< 20ms

  • Configuration parameter which are stored in automationBuild.xml file

    Do you know the correct path for below configuration parameter which are stored in automationBuild.xml file which is kept in src folder of osm project? <property name="studio.weblogic.home" value=""/>      <property name="studio.java.sdk.home" value=