Discount for first 100 customers only

Hi Gurus
   I want to give the first 100 customers 15% discount on a product and after 100th customer  10% discount as usual to be continued. Please tell me how to configure . Thanks in advance
yezdevan

Hi ezdevan,
Other option:
go to tcode V/06 to Customize the Condition type by checking  the "Condit.update" in Master data subscreen. This will make the condition type updates and you can control whether limit values are relevant for pricing.
In VK11 for the condition type,  Goto Additional data. Take a look at field named Max.number.of.orders.. and put there the total number of orders (100 in your case). This will make the condition record work for 100 times.
Regards,
Gumanti
> Hi Gurus
> I want to give the first 100 customers 15%
> discount on a product and after 100th customer  10%
> discount as usual to be continued. Please tell me
>  how to configure . Thanks in advance
> ezdevan

Similar Messages

  • How to set discount for first few customers???

    If a company plans to offer a new scheme in which first 100 customers will get 20 % discount and after that normal rates from 101st customer onwards. How to do the settings for the same.

    Hi,
    No automatic solution
    For this you can mange with PROCESSING status of condition record at initial stage it is released status once discount consumed by 100 customer then set status as block in condition record(before 101 customer can order)
    VK11/VK12
    Menu EXTRA >> key enter processing status
    Some time release status or processing status column not appear in condition record the reason is the table used in access sequence no flagged for WITH RELEASE STATUS when creating table,so create new table tickmark to with release status and assign same in access sequence of your discount condition
    Kapil

  • NOTE: This is applicable for HR Legislative customers only + 9239090

    Hi,
    I have applied patch 9239090 on R12.1.1 and it'written in patch document
    Latest legislation data update (Hrglobal installation) NOTE: This is applicable for HR Legislative customers only.
    Instruction for applying HRMS Legislative Data (hrglobal.drv)
    Please refer to My Oracle Support Knowledge Document 145837.1 for details on
    the patches supplying the latest legislative data definitions and for
    instructions on how to actually apply this data to your system.
    How Can I find whether this is applicable to us or not ?

    HRMS PATCH INSTALL FAQ [ID 130369.1]CHeck it ..but nothing is clear. I did a fresh install of R12.1.1 and then upgraded it to R12.1.3.

  • LOW INCOME discount for current fios customers ??

    hi as a current fios customer  , i cant find anything for low income discount we were doing great when we got fios a year and half ago but have fallen on hard times both being out of work we love our services  with verizon but we have our papers for filing for low income help  and cant seem to find anything about it do they even offer something like this ??? struggling desperately to save our fios as it is our only way to get online  to keep the kids occupied while us adults quietly freak out trying to figure out how to pay our fios bills and survive and  that  now very behind please help if you know anything thank you 

    Don't take this as a fact because I'm really not sure, but I believe cable companies have a very low level service that basically contains only local channels and again I could be wrong, but most local municipalities require such service for emergency purposes. I remember years ago TWC had such a service that complied with local wishes.
    Good luck because I know it can be hard being without information when times are hard.

  • Folio Builder sign in for Pro/Enterprise customers only?

    Have Adobe changed the way users can access the Folio Builder?
    I am having problems signing in to my personal Adobe ID and then using the Folio Builder tools... whereas I used to be able to do this.
    I have folios in there, like interactive adverts, test work, then I share those folios, with the various Enterprise accounts for publishing into folios.
    If someone can advise on best practice for Adobe DPS CS6, that would be helpful. I have updated to all the latest DPS tools for CS6.
    cheers
    David

    Okay. This helped.... plus the sign-in window has changed...
    http://forums.adobe.com/thread/1203788?start=40&tstart=0

  • Condition Record for Special Price to First 10 customers

    Hello All
    there is a requirement from real estate client that they want to charge a special price to the first 10 customers purchasing their residential flat.Sale part is being handled thru SD only. Flats are created as Material master. Now as n number of Flats are created. So, thru Standard functionality, special price is required for first 10 customers who purchases these flats.
    Thanks
    Deepak Mehmi

    Hello Deepak,
    I think you are missing something. first of all let me tell you what is maxcond base value .
    Maximum condition value
    Specifies the maximum condition value for this condition record.
    Use
    You use this field to limit the use of a particular condition record to a specified total value.
    Example
    You offer a customer a special discount on a certain product but want to limit this discount to a specified total amount. You enter the maximum amount (for example, 1000 USD) in this field. As you process orders that use this condition record, the system updates the cumulative value. When the maximum value is reached, the system automatically deactivates the condition record in subsequent orders. In your case you decided to sell first 10 flats @ 100000 Rs, means total 10 lakhs
    Mention this value here.
    Once you mention this and start selling your flats, and system monitors this value, and soon as it reaches 10 lakhs, it will stop giving the discount to the customer. This is a control other than the no: of orders , it means you have here second control to control no: of orders, by no: wise and by value wise. I think you got what I mean.
    Now coming back to your question :
    as, for 11th order, the required price is different (e.g. Rs 2000 after 10th SO), where i'll maintain condition record with value Rs. 2000. ?
    You have to maintain standard price in PR00 and any discounts should go for respective discount types and in your case it should be K004 condition type by going to VK12.
    Again now please maintain max.condition value in K004 by ticking condition update at V/06 and coming back to vk12, selecting k004, and maintain your discounts, maxcondition value , no: of orders required etc. and save it.
    I have repeted this in my sandbox this for you and got it right, then why not you. try it again, you will get it. Do it right.
    All the best.
    Sridhar.
    Note
    To see the current cumulative value for a particular condition record, you select Details -> Cumulative values in the overview screen of the condition record.

  • Dicount for first 50 sales orders

    hi
    1.i need to give discounts for first 50 sales
    orders, where can be this settings can be made.
    Cheers, Chitty

    Hi,
    Please go the tcode:v/06 , select the K007 then check the update condition.
    then go the vk11 , then select the condition type k007 , then
    go the additional data  then give the number pof order , 3
    in standard we have option to give 3  orders only,
    Thanks
    Ramesh

  • Perfect speeds for first month, now at standstill ...

    As the thread title describes really... Help?
    After a month of snail speed ADSL after transferring my ISP to BT last time round, I suppose I should've known better but given it had been stable for so long after that, I thought an upgrade to Infinity was worth treating myself to! It worked perfectly for the first month, 37mbps up and 9mbps down 24 hours a day, wifi and ethernet.
    And now, it doesn't. Nothing has changed at my end, or in the houses around me (yep, I asked everyone!). Wifi speeds are hovering around 2mbps, 24 hours a day; I've tried isolating the 2.4gz and 5gz freqs together with using them together (I usually only use the latter anyway) - no change. Manually selecting channels and auto wireless - no change. Resetting the router - sometimes a brief return to normal speeds, then back it goes to snail pace.
    Pretty gutted, I work from home and this is losing me money on a daily basis (although I know better than to expect sympathy from customer services, who I have contacted anyway). Does anyone have any suggestions I can try? The problem is mainly over wifi - ethernet speed checks are better - but when I run a check using an app other than BT's, I can see the downstream fluctuating wildly, rather than a consistently slow speed (anywhere between 1mbps and 20, before gradually crawling back to 1mbps). Something suddenly seems to be interfering with it, but I have no idea what.
    I'd really appreciate any insight. Thanks.
    NB I'll post my HH5 stats when I get in tonight

    Run a speed test using an Ethernet connected device, to prove your problem is wireless related.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Delegated Admin web application only requests first 100 accounts?

    Hi,
    - Sun Java System Messenger Express 6.2
    - Delegated Administrator 6.3-0.09 built Sep 6, 2005
    Is this true that the Delegated Admin (DA) web application only requests first 100 accounts?
    Once logged in to DA web application, we only see "Retrieved Users (100)" if we want to see all users; but if we do a search on uid or username, all other users are retrieved.
    One of the admin gave us the following response:
    This is not a directory-related problem, but rather a matter of the design of the DA application you are using. The web-based java app only requests the first 100 accounts from the directory (presented by default as 10 pages of 10 accoints each.) , since you're supposed to be using the search facility to find accounts when you need to modify or delete them.
    This is a deliberate design choice by the Sun programmers who wrote the thing, probably because the directory is capable of holding several thousand accounts and pulling them all would take quite a bit of time (not to mention memory space), so in the interest of response-time speed they limited the data pull.
    I cannot modify this application's functionality. If you need a list of all user accounts in your domain, I can supply an LDIF on request, with any attributes (mail, uid, cn, etc.) that you like.
    Please let us know if there is any way we can view all users (approx. 1000) from DA web application.
    Thank you for your time,
    GJ

    Yes, the terminal commands I gave are changing permissions.
    Properly written OS X apps should run under any user account, and should store any account-specific information in the each user's home folder. Some poorly written apps might only be executable by the administrator. Running the first command I have will make the app executable to all users.
    Some even more poorly written apps will write user data into the application itself rather than to the user's home folder. This is a particularly bad problem with game software, which for example might write high score info into the app itself. If this is the case for your misbehaving apps, the second command I gave will make the app writable by everybody and should solve the problem.

  • When purchasing on Apple TV, gives error "Only for United States customers"

    I am a United States customer and I have my Apple TV in the US and it works fine along with the new update that I got last night.
    It is connected via ethernet 100mbs lan and 'sees' my iTunes 7.6 on my computer (Windows XP) just fine.
    Sync works... plays YouTube just fine... all is great EXCEPT!!!!
    I cannot make ANY purchases from my Apple TV... is says something like:
    "...only for United States customers"
    and then it bombs out.
    Anyone else have this issue?

    Thank for you the quick reply...
    Yes, I have setup to default to the USA...
    And I have also setup Apple TV to connect to the US Itunes store.
    I have not changed anything, but it seemed to correct itself just a minute ago.
    Weird.
    I changed nothing, then it starting working by itself.
    Bug?

  • I have an iPhone 4 and plugged it into itunes on my computer for teh first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!

    I have an iPhone 4 and plugged it into itunes on my computer for the first time. Only to discover my sister has obviously plugged hers into my itunes account and now I have lost all my photos and numbers. Please help me!!

    It can't do that by itself. You had to click through several prompts telling it to restore it from a backup of an old phone for that to happen.
    If the phone was not backed up to iCloud before this happened, or to another computer, then the data is gone. There is no way to recover it.

  • CC for students is 14.99 a month or prepaid 180 for a year but only for the first year. Does anyone know how much more it is on the second year

    CC for students is 14.99 a month or prepaid 180 for a year but only for the first year. Does anyone know how much more it is on the second year

    Hello,
    please pass through these libks:
    https://creative.adobe.com/plans?plan=edu >>> Promotional pricing for first year. See terms >>> http://www.adobe.com/offer-terms/edu_puf_promo.edu.html >>> After the first year we will renew your contract automatically for another year at the then-current standard annual price (currently at $359.88), unless you cancel.
    Hans-Günter

  • HT4053 I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo

    I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
    How can I start my iPhone (I already did restart - it didn't help)

    Did you activate the phone already?

  • Any discount for longtime customers/Senior(s)!?

    I chat on line yesterday, trying to find a way to lower my skyrocketing Xfinity bill! Liza was very nice but could not provide a break in the monthly billing. Xfinity is charging 10 bucks for HD Tech Fee, they must be kidding! it shoud be free for Senior!. Anyone got a nice 10 to 20 percent off their mounting TV bill? Every 2 to 3 months, they add a dollar here, a dollar there... I am now at almost 200 dollars a month for a digital starter with digital preferrred (I might cut this one, 18 bucks a month) and I have internet with them. Cannot get any channels without cable, it just sucks. I wonder how much is the salary of the top guy at Xfinity, definitely not a Social Security monthly benefits!Best 

    Again wrote: According to this post there is no senior discount.Unfortunately, "Comcastcares" posts are sometimes, ummmm, "incomplete". A few areas have negotiated small senior discounts. See, for example, the city of Seattle "Office of Cable Communications" page at http://www.seattle.gov/cable/faq.htm which says:Q: Are there discounts for senior citizens or disabled people? A. Yes. Comcast provides a discount of approximately $5 off of the monthly rate for any tier of cable television service for low income seniors, low income disabled, and people living in non-Section 8 subsidized housing.Retraitee, it would probably be best for to check with your local franchise authority. Contact information should appear on your Comcast bill.

  • Discount for new product.

    it is a scenario where iam not able to get the logic pls help me,
    A new material is launched, so company wants to give a special offer for the first 5 customers and after which only a particular number range (ex: 3500- 3800), system should give 5% discount flat on gross value. It should always pick the best price for Company.

    Hi there,
    This is what I feel. Since it is just for 1st 5 customers, you can think of a manual discount which the order loading person will manually enter in VA01.
    Then if you want to give a discount of 5% for the next 3500 - 3800 customers, then devise a new Z table. The Z table table should keep a track of num of orders that are raised on order type ZOR, which has your new material X for eg.
    Define a new discount type ZDIS with condition table sales org / material. Maintain 5% in the condition record for the discount. Maintain the discount ZDIS in the pricing procedure. In the requirement routine, put a logic that the system calls the Z table. If the num of orders in the Z table is <= 3500 / 3800, only then the discount should apply.
    Here there is also a situation where 1 customer places more than 1 order. So duplications should be avoided when system saves the values in the Z table.
    Discuss this with your ABAPer on how to devise the logic.
    Hope this helps.
    Regards,
    Sivanand

Maybe you are looking for