Discoverer Layout Configuration

Greetings!
I'm starting to work with OracleBI Discoverer IAS and I must try out some of its features, in order to suit the company's needs and improve the work done so far.
One of the details that is required to change is the report's info displayed in Discoverer Viewer: the parameters are always shown on top of the table! Is there any way to have this option always colapsed when the page is loaded.. or even to avoid it from appearing at all???
I will be glad if you could help me!
Thanks in advance,
Ricardo Pinto

Hallo,
I have the same problem. I want that the paramters are collapsed by default when then the report page is shown.
Has anyone some ideas or hints? (Worksheet.uix, etc...)
I have reports with a lot of parameters that are important but the default should be that the parameters area should be collapes.
Thx for any hint, Willi

Similar Messages

How to add a field in line layout configuration for Tcode F-28

Hi friends,
I have a requirement where i need to add a field in line layout 'K1'.
The field is EXNUM - ( Official Excise Document Number ) from the table J_1IEXCHDR into the existing Line layout 'K1'.
I am not able to add this field under line layout configuration,since this field does not exist in field list.
I have been searching for the suitable enhancement,but not able to locate one.
It would be really helpful if someone share some info regarding this issue.

No configuration is available at transaction code o7z4s
No enhancement is available
Even validations (OB28) and substitutions (OBBH) will not work since this will use BSEG/BKPF tables /ABAP System Fields
You need to go for Z program by copying the existing program of F-28 and add your required field with the help of Abaper.
Srinivas

MD47 - Layout configuration

Hello,
My client needs for a certain Product Group, that trx. MD47 (Evaluation of Product Group Planning) only shows the Cumulative ATP values.
I think this can be arranged via a specific layout configuration but I can not find in the IMG where to do this config!
Can anyone help me on this one.
Thanks
Aart

Hi Aart
Transaction SPRO
Production
> Production Planning
> Master Production Scheduling
    > Evaluation
       > Define Evaluation Profiles
       > Define Layout
First you define an evaluation profile, then assign the evaluation profile to your layout. Within the evaluation profile (Transaction OPPM), you can decide to choose 'LA Available qty', 'AT ATP quantity' or 'AC Cumulated ATP'. Maybe one of them can fulfill your requirements.
Best regards,
Tao

Layout configuration prevalence

Hi y'all !
I've created a keyboard layout using KLC. I need the shorcuts of such layout to prevail over the shortcuts of other applications
such as Microsoft Word and over the ones associated to browsers - typing in the notepad poses no problem at all, as every stroke combination works.
Can this be set in some direct way, or rather changing manually one by one ?
I am using W7, and the laptop is Acer.
Thanks in advance.

Sorry, this is forum which discuss questions and feedback for Microsoft Office product. We have no existing file Keyboard layout configuration file for Windows 7 to deliver you to setup that. If we want to do this, we may define it one by one only.
Tony Chen
TechNet Community Support

Layout configuration

Hi there,
does anyone experience with this layout configuration? If so, please advise. Thank you.
<b>Lead colume:</b>
cost center1
KF1
KF2
Cost center1
KF1
KF2
<b>Data colume:</b> posting period (001-012/fiscal variant K4 OR 004-012 and 001-003/fiscal variant V3);it depends on the company codes. There will be columes - subtotal for Q1,Q2,Q3,Q4 after every 3 months.
J.

Hi there,
does anyone experience with this layout configuration? If so, please advise. Thank you.
Lead colume:
cost center1
KF1
KF2
Cost center2
KF1
KF2
Data colume: posting period (001-012/fiscal variant K4 OR 004-012 and 001-003/fiscal variant V3);it depends on the company codes. There will be columes - subtotal for Q1,Q2,Q3,Q4 after every 3 months.
J.

Oracle9iAS v2 Discoverer Services Configuration Page

Hi, i am trying to change communication protocol in discoverer plus since i could not connect to it outside of firewall(inside firewall it works fine). In the documentation it says that i need to go to em site's Oracle9iAS Discoverer Services Configuration Page and change the default communication protocol.
But when i go that page i do not see the link to Discover plus. I could only see(General Discover,Discoverer Viewer, and discoverer portlet provider links.
How can i have a discoverer portlet link appear on the configuration page? Any help is appreciated.
Below is a log file(i changed a url for security purpose):
Oracle JInitiator: Version 1.3.1.8
Using JRE version 1.3.1.8 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\TairProxy Configuration: no proxyJAR cache enabled
Location: C:\Documents and Settings\Tair\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0----------------------------------------------------
Downloading http://ga.adv.com:7779/discoverer/plus_files/disco5i.jar to JAR cachejava.util.zip.ZipException: ZIP file must have at least one entry at java.util.zip.ZipOutputStream.finish(Unknown Source) at java.util.zip.ZipOutputStream.close(Unknown Source) at oracle[i]Long postings are being truncated to ~1 kB at this time.

Hi
Looks like you have two threads on this subject. Please see my reply on this thread: Oracle discoverer ver 9.0.2.39.02
Michael

Error in discoverer 11g configuration

Hi,
We are in the process of configuring 11g (11.1.1.2) discoverer with 11.5.10.2 applications. We are done with the installation of Weblogic server and successfully installed discoverer software and applied the cumulative patch on top of it.
We are getting this strange error while running eulapi command as part of the post steps
[orabist@bin]$ $ORACLE_HOME/bin/eulapi -CONNECT eul4_us/xxxx@DEV -GRANT_PRIVILEGE -USER SYSADMIN -PRIVILEGE administration -PRIVILEGE all_admin_privs -LOG grant_eul_admin_privs.log
-connect <**********>
-grant_privilege
-user SYSADMIN
-privilege administration
-privilege all_admin_privs
-log grant_eul_admin_privs.log
Exception in thread "main" java.lang.UnsatisfiedLinkError: no dcjni51 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1028)
at oracle.disco.eul.builder.proxy.JNIDiscovererBuilderProxy.<init>(Unknown Source)
at oracle.disco.eul.commandline.EulCommandLineConnectRequest.connectDB(Unknown Source)
at oracle.disco.eul.commandline.EulCommandLineConnectRequest.execute(Unknown Source)
at oracle.disco.eul.commandline.RequestProcessor.processRequests(Unknown Source)
at oracle.disco.eul.commandline.EulCommandLine.processRequests(Unknown Source)
at oracle.disco.eul.commandline.EulCommandLine.main(Unknown Source)
[orabist@bin]$
Do we have to set any environment related variables other than ORACLE_HOME before running this eulapi command? Any help on this would be greatly appreciated.
Thanks
Murali

Issue resolved...
Compared the eulapi commands between 10g and 11g observed that 11g eulapi command is not sourcing the environment file
After sourcing the env file for 11g, Issue is fixed we need to source discenv.sh file
[orabist@wls]$ . ./asinst_1/Discoverer/Discoverer_asinst_1/util/discenv.sh
[orabist@wls]$
[orabist@wls]$ $ORACLE_HOME/bin/eulapi -CONNECT eul4_us/eul4_us@DEV-GRANT_PRIVILEGE -USER SYSADMIN -PRIVILEGE administration -PRIVILEGE all_admin_privs -LOG grant_eul_admin_privs.log
-connect <**********>
-grant_privilege
-user SYSADMIN
-privilege administration
-privilege all_admin_privs
-log grant_eul_admin_privs.log
Command completed.
[orabist@wls]$

NACHA File layout configuration

An ACH NACHA file has the following components..
File Header Record(1)
This gain has many fileds like Record type code, priority code, immediate destination etc
Batch header Record(5)
Record type code, company Identification
Entry Detail Record(6)
Transactioncode, Check digit etc
Addenda Record(7)
Record Type Code...etc
Batch Control Record(8)
File Control Record(9)
Batch Count, block count etc...
Now This is the Layout which the company wants to implement
The commpany is already using an ACH file for an old bank.
But wants to implement a New Bank with a lil variation of old NACHA format
In SAP where can I set these fields or parameters.....
for some programs I can goto System->Status and double click on program and goto ABAP editor and change fields.
But for this ACH where can go and set the parameters according to requirements
There is actually one more requirement...
In the ACH file The New banks wants the
File Creation Date (It is entry in field no 5 of File Header Record(1) of ACH file)
this date should be less than Effective Entry DAte (It is an entry in Field no 9 in Batch Header Record(5))

Hi guys,
I'm using RFFOUS_T program with F110 to produce ACH file.
I was able to transmit file to the bank via batch process but bank said that they have received errors on the file.
Where do you correct these changes on ACH file or in configuration ? Here are some of the errors that they have mentioned.
ON THE "5" RECORD IN FIELD 03 (POSITIONS 05-20) RECORD NUMBER 000002
   ACTUAL CONTENT->
ERROR: COMPANY NAME MISSING
ON THE "5" RECORD IN FIELD 05 (POSITIONS 41-50) RECORD NUMBER 000002
   ACTUAL CONTENT->
ERROR: FIELD CANNOT CONTAIN ALL SPACES
ON THE "5" RECORD IN FIELD 07 (POSITIONS 54-63) RECORD NUMBER 000002
   ACTUAL CONTENT->
ERROR: ENTRY DESCRIPTION MISSING
ON THE "5" RECORD IN FIELD 09 (POSITIONS 70-75) RECORD NUMBER 000002
   ACTUAL CONTENT->
ERROR: INVALID DATE VALUE
ON THE "6" RECORD IN FIELD 08 (POSITIONS 55-76) RECORD NUMBER 000003
   ACTUAL CONTENT->
ERROR: CUSTOMER NAME MISSING
ON THE "6" RECORD IN FIELD 11 (POSITIONS 80-87) RECORD NUMBER 000003
   ACTUAL CONTENT->00000000
   EXPECTED VALUE->05310156
WARNING: ORIGINATING BANK ID NOT SAME AS "1" RECORD
ON THE "6" RECORD IN FIELD 11 (POSITIONS 88-94) RECORD NUMBER 000003
   ACTUAL CONTENT->0000000
ERROR: SEQUENCE NUMBER NOT GREATER THAN PREVIOUS NUMBER
ON THE "8" RECORD IN FIELD 07 (POSITIONS 45-54) RECORD NUMBER 000004
   ACTUAL CONTENT->1931175150
WARNING: COMPANY ID NOT SAME AS "5" RECORD ID NUMBER
Thanks in anticipation,
Manoj

Invoice Layout configuration for a specific customer within a sales org.

Hi,
I have a situation where the invoice layout need to be configured for one particular customer within a sales org in a different style from rest of the customers.
Could someone let me know how to do it please.
Thanks.
Best regards,
Srikrishhna

By u201Cinvoice layoutu201D, I assume you mean layout of the print output. If so, then
u2022     Set up a new output type as a copy of your standard output type. Assign an access sequence containing customer.
u2022     Add the new type to your active output determination procedure and assign an appropriate requirements routine (if any).
u2022     Assign a layout set (smartform, sapscript, adobe, etc.) that meets your customeru2019s requirements.
u2022     Maintain the condition record.
And away you go.
Regards,
zKen

Xfce - layout configuration - dont save

The few hours ago I was using the xfce4 with the layout set in BR. After leave me for an hour, leaving your computer on with no applications running, xfce4 changed my layout for the American model!
I was in the keyboard settings in the xfce4 menu and I was scared to see that there was still indicated as layout Brazilian .-.
Deleting the configuration and added a new keyboard with the same configuration! restarted the computer. Before calling the xfce4 noticed that the terminals ABNT layout was being loaded correctly.
Xfce4 started and the problem continued! I decided to download the gnome. installed it and set up your layout to the ABNT. Incredible! he carried no major problems the correct layout!
However, I would go back to using the keyboard with xfce4 portgues_brazil)
what might be happening?

mickey13 wrote:
Is there a way to save/load a desktop layout (where each application stores it's location and window size), and loads it automatically after system restart or logging off? Thanks.
no. there is no such thing. individual applications window positions are stored in preference files of those applications and their behavior is programmed into applications themselves. some apps have special features to remember their desktop positions between launches but if they don't there is nothing you can do to force them.

Receipt voucher and payment voucher layout configuration

Dear experts,
i would like to configure receipts vouchers ,payments vouchers layout,also to design the printout when we receive or make payments
please advise and give me paths
thnx

Hi,
Get requirement or layout design from your business and discuss with your technical person ABAP & get it done.
form standared system you can able to get correspondances with referance to document numbers & SAP standared formate it will not support to your business.
Regards,
Viswa

Discoverer Viewer Configuration File

Hi,
There is a scenario where in, most of the users use Discoverer viewer reports from the same login ID, They do changes and save the Workbook. Now when a new user logins he see the changes saved by the previous user . Now we dont want to allow the users to save changes and want to change the config setting so that no user can do any changes.
As per my unerstanding, one way of doing so it by login to application server and Uncheck the preference check box and save the changes. Doing this the preference tab will not be visible to any user.
Want to know is there any other way by which preference tab can be Disabled but still can be seen on the right corner of the viewer page?
Or is there a way we can change the configuration setting in any of the config file of discoverer viewer so that users are not able to change the setting...
Discoverer version is 10g.
Thank You.
Regards,
Anuj Malhotra

Hi Michael,
The Scenario is like, most of the users use Viewer only to access reports.
The main aim right now is to some how not allow users to change the settings whcih they change using the preference tab or presentation options.
I checked it the config document of Discoverer viewer and found:
The Steps to remove Preference tab or presentation options in Oracle Application Server Discoverer Configuration Guide
10g (9.0.4) are as follows:
1. Open the ui_config.xml file in a text editor or XML editor
2. Locate the <appearance> tag in the file
change the value of the display_preferences_link tag to false
change the value of the display_presentation_options_link tag to false
3. Save the ui_config.file
But I didnt not find the steps to remove the preference tab or presentation option using Configuration.xml file in Oracle® Business Intelligence Discoverer Configuration Guide 10g Release 2 (10.1.2.1 ).
It was mentioned that to remove the presentation option in 10g version we need to login to Oracle Application server and uncheck the preference tab Option.
Want to know is that the only way of removing presentation options or preference tab from 10g Version or something can be done from configuration.xml file also.
Regards,
Anuj Malhotra.

VA02 Item Layout Configure failure

While in VA02 I wish to change the order of the columns. Having done that I hit the Configure button, create, and save a new variant. When returning to the screen, the layout is completely messed up. If I select the configure button and select either Basic_Setting or my new one, it fixes it. This is happening for most if not all users. We are on
Release: 640 Final Release
File Name: sapfront.dll
File Version: 6405.5.24.3047
Build: 892113
Patch Level: 24
Any help would be greatly appreciated!
Dan

The problem is, when the user closes the order screen and goes back in, the screen is neither in the standard layout or the user layout. Nothing is in the right place.

Add 2 same fields in O7Z4 (maintain line layout configuration)

Dear expert,
I would like to customize a new line layout for f-44 & f-58 when select on process open item.
I want to have 2 field of text field (table: RFOPS, field name: SGTXT), but when i select on insert after... only 1 text field can add in the new line layout.
Is it possible for me to add another text field (same field name as above) in same new layout?
Or this require ABAP to help?
Please advice.
Thanks
regards,
ng chong chuan

Hello,
The problem is that only certain amount of characters are supported. What you can do is double click on the field (or press F2) and reduce its dispay lenght. During the display, the user can scroll on the shortened fields.
I know its not the best, but at least is something.
Hope it helps, Jaime
Edited by: Jaime Plata on Dec 2, 2009 2:24 AM

Discoverer 10g configuration steps

Hi All,
My company is implementing discoverer 10g. One question that I have is that is it possible to have a setup which requires the users to change their password (password reset option) the first time they log ino disco 10g. Probably its going to be plus. I have seen other companies have that setup.
Would anyone point out the set up steps needed to implement it.probably we will need a password policy on the databas and some setting changes on the Apps server but I am not too sure.
Any help is deepely appreciated.
Thanks.

Hi,
You can expire the users' password in the database, but then the user will not be able to log into Discoverer at all. Discoverer has no built in mechanism to change the database password.
You could implement your own password expire mechanism that would allow the users to login but not do anything until they had changed their password using a custom workbook. Quite complicated to set up, you would need to use contexts, logon triggers, a bit of PL/SQL and maybe VPD.
Rod West

Discoverer Layout Configuration

Similar Messages

Maybe you are looking for