Discusion - - - Post Comment - issue

I have a Post Comment functionality where we are having different kits and assets. The users can post comment abt the kits and assets. For keeping the post comment file a new file is checked-in with the same name appended with "_D" and same account. Suppose a kit is having account "EMPL/MKTG", so the discussion file will also be checked in with the same account. Here the issue is that user apart from this account cannot post comment for the existing comment and they also cannot create new discussion file. So, is there any solution for it. So, that we can allow guest users also to Post Comment for the same.
Edited by: Saurabh Anand on Mar 1, 2011 3:00 AM

I think you have tow obvious options
1)Write a security filter customization (as shown in HowToComponents) to temporarily raise security for a guest user to comment on documents
2) customize THreadedDiscussions component or raise an enhancement request for this. I do not think you can do this through config - Like to be proved wrong though.

Similar Messages

  • I am having problems posting comments and writing blogs on Yahoo Pulse. Their tech support says that the problem is with my Firefox server. How do I resolve this issue?

    I get error messages when posting comments to my friends pages, cannot edit blogs without getting errors and cannot add new friends to my page.

    http://en.wikipedia.org/wiki/Internet_service_provider
    Firefox isn't your "server" or your ISP. Contact whoever you pay for internet access - Comcast, AT&T, Net-Zero, etc.

  • Can't post comments to pages

    When anybody (including myself) tries to leave a comment, an error message simply says "Sorry. We are unable to process your request at this time." Is this a Mobileme thing again?

    I don't understand why this worked, but it did. Through Apple support, I was instructed to disable the Ariel font in my applications folder. I had to erase all the comments (that were in Ariel) and retype them into the blog (I couldn't copy and paste for some reason). I made sure the ADD COMMENTS line was at the end of the blog, and made sure the box was checked in the inspector function. I then saved all the retyped comments (in a different font) and deleted the original Ariel font comments, published to mobileme, and the post comments function now works. Here are the instructions I followed:
    Symptoms
    The iWeb 1.1 update adds comment support for blogs and podcasts (MobileMe published sites only). Depending on which font and templates you use, the "Add Comment" link may not function correctly in your published blog entries.
    If you experience this issue, instead of an Add Comments link at the bottom of your blog entry, you may see a non-functional link that reads @post or @comment.
    Products Affected
    iLife, .Mac/iWeb website hosting, MobileMe
    Resolution
    Update to iWeb 1.1.1 or later and republish any pages which use Arial fonts. If you're not able to update immediately, you can use the following steps:
    Open Font Book, located in your Applications folder.
    Disable the Arial Family of fonts in your User collection. For more info see Turning off fonts.
    In iWeb, create a new blog or podcast to replace the old one.
    If you have content in the old blog that you wish to keep, cut and paste it into new entries in the new blog or podcast.
    Delete the old blog or podcast from the Site Organizer.
    Publish your site.
    If you do not create new blogs after disabling the fonts in your user collection, you may see "Missing Font" error messages when you open iWeb.
    Note: Mac OS X installs fonts in /Library/Fonts, including Arial fonts. Some software packages install fonts on your computer when you install or first launch an application. Those fonts will typically be installed in ~/Library/Fonts.

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • Suddenly unable to post comments on iWeb blog - image verification error

    People suddenly can't post comments to my blog page (web.me.com/stannerory). I've tried this myself, and posting continuously fails at the image verification process, one receives an error message that says the letters entered don't match the image, yet they do. Someone suggested that cutting the comment, closing, reopening, and pasting, and doing the process a second time would work, but I haven't found this to be successful either. Is there some kind of a workaround? Anyone else having this issue?

    OT -
    Thanks for your efforts.
    It seems to be intermittent now, which is an improvement. I still can't add or remove a comment without fail. It's some consolation that it might be a server issue, but if it were, wouldn't there be all kinds of unhappy Apple users complaining about the issue, AND wouldn't the mobileMe website have some kind of problem indicator light flashing? Of course it would.

  • Cant post comments on youttube videos

    I can no longer post comments on youtube videos, I tested with google chrome and had no problem, but using mozilla I can no longer do so...

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Click the menu button [[Image:New Fx Menu]] and click History button, and then Clear Recent History... .
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Dump "COMMIT_IN_POSTING" while posting Goods Issue

    Hi All,
    We are trying to post Goods Issue using the FM BAPI_GOODSMVT_CREATE.
    Based on the return status of this FM we are commiting the transaction using BAPI_TRANSACTION_COMMIT.
    On Execution we are getting the dump "COMMIT_IN_POSTING".
    Please let us know if anyone has any idea about this error.
    Regards,
    Lavanya.

    Hi Florian,
    I have commented the BAPI_TRANSACTION_COMMIT, but it is giving same dump since commit work is happening in another FM which I am using in my program. So I have commented that FM, now it is giving a dump MESSAGE_TYPE_X. The dump error analysis is:
    Short text of error message:
    Nested call of PERFORM ON COMMIT: NESTED_PERFORM_ON_COMMIT caller: SAPLM
    BRE program: SAPLMBRE form: DELTA_PUT
    Long text of error message:
    Diagnosis
         During processing of a routine called using PERFORM ... ON COMMIT,
         the system attempted to call PERFORM ... ON COMMIT again. Nesting
         of this is not allowed.
    System Response
    Procedure
         The program indicated after "Caller:" must be changed. This is the
         program that calls the routine indicated after "Form:" during
         COMMIT processing. This routine is part of the program indicated
         after     "Program:".
    Regards,
    Lavanya.

  • Can not post comment to a comment at FB

    When I use iPad ( I bought about 2  months age)as my machine to open Face Book and I can do most of the normal functions as my iphone, but I can write comment to friends' comment but can not post. I can have my "status", "photo" only can not post comment, Why and how to make it work?

    Thanks for the info.
    Firstly, make sure you are not using the split keyboard. There is a bug in the app which disables the send button. Make sure it is the full keyboard you are using. (Pinch the split keyboard to rejoin it).
    If you still have no luck, then use the website, or an alternative app. They are generally better than Facebook's own offering.
    Let me know if this works, or if you have any other issues,
    Nathan

  • Youtube Post comment & Load more videos buttons will not work, just shows vista loading ring and does nothing

    I have been having this problem since last November.
    When attempting to post a comment on a video in youtube when I click on the post button the button turns grey and then I simply see the Vista loading ring. I can wait hours or even leave my computer over night however it never successfully posts the comment.
    I am logged in to my youtube account and was able to post comments prior to November.
    I am currently using Firefox 20.0.1, I have attempted disabling all of my add on's with no effect.
    I have an additional issue which I believe is related due to the similarities.
    When browsing youtube videos from any channel the "Load more videos" button does the same thing.
    for example the following page http://www.youtube.com/user/BdoubleO100/videos?view=0
    if I scroll to the bottom and hit load more nothing will happen, as such I cannot browse to older videos.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • Posting Comments to iWeb Blogs is Not Easy :-(

    We have created a Family Blog and now all are trying to post comments to a nephew/cousin in the Army in Afghanistan.
    Most all have called and emailed to say they are having HUGE issues trying to post a comment to their nephew/cousin in the Army in Afghanistan.
    They ALL have had trouble and have had to try numerous times.
    They particularly have issues trying to put in the "verification code". So far this silly code has prevented all of our messages from being seen by their cousin/nephew.
    Passwords and codes do nothing but screw up the owners and users and so far iWeb proves this true.
    This "Gong Show" should NOT be happening! Come on iWeb, please fix this and make this easier for our family to send comments to their relative in Afghanistan.

    Fred ~ An alternative to iWeb's blog is to hyperlink from your iWeb site to a free Posterous blog, perhaps via their Posterous Blog Widget — see here.
    Posterous has "dead simple group blogging by email" where each of your three possible blogs can now have multiple contributers — see here.
    Posterous group blogs are email lists too, in that you can get instant email notifications for new posts — see here.
    General info about Posterous blogs is in their FAQ. ...Group members can contribute text, photos, sound and video files, etc. to a Posterous blog simply by email. Plus there is the usual commenting capability plus comment alerts for the account holder.

  • Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N

    Hi Experts,
         I have requirement ,where I need to  change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
              I have already check BADI's below as follows:-.
    1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
    2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
    3) BTE-1050 - This BTE is not getting triggered while doing PGI.
            Please suggest any other possibilities to make the change.
    Thanks & Regards,
    Suganth.

    Hi Kartik,
                I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
    Thanks
    Suganth.

  • Profit Centre Document issue at the time of Post Goods Issue on SD.

    Dear Experts,
    While SD person is posting Post Goods Issue, System is generating Profit Centre Document along with other documents. We are facing an issue with Profit Centre document here and the issue is:
    Some Profit Centre Documents are populating Delivery Order Number on respective field while some are not. Ideally all profit centre line items should show Delivery Order Numbers.
    Please guide any solution to resolve this issue, its urgent.
    Thanks in Advance.
    Regards,
    Zain Bashir

    Hi Zain
    This is a tricky issue
    Are you saying that the PCA document has the Delivery Number (VL01N) updated in some cases and not updated in some cases?
    The Delivery Number is updated in PCA document when you create Delivery from VL01N and do PGI from VL02N
    But, if you do PGI from VL01N itself, then the delivery number is not updated in the PCA document
    SAP recommends to post PGI from VL02N
    Br. Ajay M

  • Post Good Issue Error

    When I Press the Post Goods Issue Button for a delivery in SD the error dump appears.
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          10/15/2008 06:38:52
    Short dump has not been completely stored (too big)
    Short text
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLMBWL" or "LMBWLU21"
    "MB_POST_GOODS_MOVEMENT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "biw7sap"
    Network address...... "68.88.249.38"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 801586"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "BIW7SAP"
    Database type..... "ORACLE"
    Database name..... "ECS"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Mar 20 2007 00:45:21"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 102
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 26130600
    Heap.... 0
    Page.... 57344
    MM Used. 19070624
    MM Free. 785208
    User and Transaction
    Client.............. 800
    User................ "CUSER14"
    Language key........ "E"
    Transaction......... "VL02N "
    Program............. "SAPLMBWL"
    Screen.............. "SAPMV50A 1000"
    Screen line......... 39
    Information on where terminated
    Termination occurred in the ABAP program "SAPLMBWL" - in
    "MB_POST_GOODS_MOVEMENT".
    The main program was "SAPMV50A ".
    In the source code you have the termination point in line 59
    of the (Include) program "LMBWLU21".
    Source Code Extract
    Line
    SourceCde
    29
       when a goods movement for an inbound or outbound delivery is posted
    30
       directly from VL31N/ VL01N, XBLNR is not yet known when we call
    31
       CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
    32
       BKPF as well. There is no other way to forward XBLNR to FI as not
    33
       every document is posted by MB_CREATE -> a new function module in
    34
       MBWL for transferring the information, called by FI, meant to load
    35
       the complete function group for all MBxx postings when this isn't
    36
       required (Performance). Would be the better way to transport the
    37
       information after switching off MBxx in later release.
    38
       corresponding IMPORT ... FROM MEMORY ... can be found in
    39
       AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
    40
    l_mem_id = 'MKPF-XBLNR'.                                   " 641365
    41
    EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
    42
    ENDIF.
    43
    IF xmkpf-xabln IS INITIAL.                               "note 434093
    44
    CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
    45
    ENDIF.                                                   "note 434093
    46
    47
    ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
    48
    49
    ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
    50
    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
    51
    EXCEPTIONS
    52
    error_message = 4.
    53
    As soon as we have started to put things into UPDATE TASK, we must
    54
    ensure that errors definitely terminate the transaction.
    55
    MESSAGE A is not sufficient because it can be catched from
    56
    external callers which COMMIT WORK afterwards, resulting in
    57
    incomplete updates. Read note 385830 for the full story.
    58
    IF NOT sy-subrc IS INITIAL.
    >>>>>
    MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
    60
    sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    61
        MESSAGE A263.
    62
    ENDIF.
    63
    Optische Archivierung
    64
    Spaete Erfassung mit Barcode
    65
    Redesign of barcode handling -> note 780365
    66
    PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
    67
    xmkpf-mjahr
    68
    barcode.
    69
    70
    MOVE-CORRESPONDING xmkpf TO emkpf.
    71
    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    72
    EXCEPTIONS
    73
    error_message = 4.
    74
    MOVE-CORRESPONDING xmkpf TO emkpf.
    75
    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
    76
    EXCEPTIONS
    77
    error_message = 4.
    78
    IF NOT sy-subrc IS INITIAL.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    4
    SY-INDEX
    0
    SY-TABIX
    1
    SY-DBCNT
    1
    SY-FDPOS
    6
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    W0
    SY-UCOMM
    WABU_T
    SY-TITLE
    Delivery 80015203 Change: Overview
    SY-MSGTY
    X
    SY-MSGID
    /SAPSLL/PLUGINR3
    SY-MSGNO
    002
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20081015
    SY-UZEIT
    063852
    SY-XPROG
    SAPLBPFC
    SY-XFORM
    CONVERSION_EXIT
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    10 FUNCTION     SAPLMBWL                            LMBWLU21                               59
    MB_POST_GOODS_MOVEMENT
    9 FORM         SAPMV50A                            FV50XF0B_BELEG_SICHERN                769
    BELEG_SICHERN_POST
    8 FORM         SAPMV50A                            FV50XF0B_BELEG_SICHERN                 86
    BELEG_SICHERN_01
    7 FORM         SAPMV50A                            FV50XF0B_BELEG_SICHERN                 16
    BELEG_SICHERN
    6 FORM         SAPMV50A                            MV50AF0F_FCODE_SICH_OHNE_CHECK         10
    FCODE_SICH_OHNE_CHECK
    5 FORM         SAPMV50A                            MV50AF0F_FCODE_WABU                    11
    FCODE_WABU
    4 FORM         SAPLV00F                            LV00FF0F                               92
    FCODE_BEARBEITEN
    3 FUNCTION     SAPLV00F                            LV00FU02                               44
    SCREEN_SEQUENCE_CONTROL
    2 FORM         SAPMV50A                            MV50AF0F_FCODE_BEARBEITEN              62
    FCODE_BEARBEITEN
    1 MODULE (PAI) SAPMV50A                            MV50AI0F                               52
    FCODE_BEARBEITEN
    Chosen variables
    Name
    Val.
    No.      10 Ty.          FUNCTION
    Name  MB_POST_GOODS_MOVEMENT
    XBLNR_SD
    0080015203
    3333333333
    0080015203
    0000000000
    0000000000
    EMKPF
    000000000000000000          ##
    2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    XMSSA[]
    Table IT_589[0x196]
    FUNCTION-POOL=MBWLDATA=XMSSA[]
    Table reference: 307
    TABH+  0(20) = 00000000200D869300000000330100004D020000
    TABH+ 20(20) = 00000000C4000000FFFFFFFF04090300E01B0000
    TABH+ 40( 8) = 08000000C1108001
    store        = 0x00000000
    ext1         = 0x200D8693
    shmId        = 0     (0x00000000)
    id           = 307   (0x33010000)
    label        = 589   (0x4D020000)
    fill         = 0     (0x00000000)
    leng         = 196   (0xC4000000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000134
    occu         = 8     (0x08000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = Not allocated
    pghook       = Not allocated
    idxPtr       = Not allocated
    shmTabhSet   = Not allocated
    id           = Not allocated
    refCount     = Not allocated
    tstRefCount  = Not allocated
    lineAdmin    = Not allocated
    lineAlloc    = Not allocated
    shmVersId    = Not allocated
    shmRefCount  = Not allocated
    shmIsReadOnly = Not allocated
    >>>>> 1st level extension part <<<<<
    regHook      = 0x00000000
    collHook     = 0x00000000
    ext2         = 0xD80C8693
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x980C8693
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    RRESWK
    22222222222
    00000000000
    00000000000
    00000000000
    %_SPACE
    2
    0
    0
    0
    L_MEM_ID
    MKPF-XBLNR
    4454254445
    DB06D82CE2
    0000000000
    0000000000
    RSJOBINFO
    00000000000000                                  ##
    2222222222222222222222222222222233333333333333222222222222222222222222222222222200
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000
    RNAME
    R
    52222
    20000
    00000
    00000
    SCREEN
    BT_UALL
    4555444222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    24F51CC000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    IT_RSTRUCT
    Table[initial]
    XMKPF-XABLN
    2222222222
    0000000000
    0000000000
    0000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SYST-REPID
    SAPLMBWL
    5454445422222222222222222222222222222222
    310CD27C00000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ODM07M[]
    Table[initial]
    GT_GOCOMP
    000000000000                                             ####              00000000000000
    3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
    000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SY-SUBRC
    4
    0000
    4000
    L_ATPCB
    22222
    00000
    00000
    00000
    XMKPF-MBLNR
    4900035075
    3333333333
    4900035075
    0000000000
    0000000000
    XMKPF-MJAHR
    2008
    3333
    2008
    0000
    0000
    BARCODE
    2222222222222222222222222222222222222222
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_ARCHIVE
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    T003
    800WL49AMS                          XX  XXXXXH
    3335433445222222222222222222222222225522555554222222
    8007C491D3000000000000000000000000008800888888000000
    0000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000
    KNVV
    00000000                     000
    2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    T064B
    2222222222222222222222
    0000000000000000000000
    0000000000000000000000
    0000000000000000000000
    VGMSEG[]
    Table[initial]
    No.       9 Ty.          FORM
    Name  BELEG_SICHERN_POST
    MAT_AUF_HINWEIS_COPY
    2
    0
    0
    0
    XLIKP[]
    Table IT_392[1x2360]
    PROGRAM=SAPMV50ADATA=XLIKP[]
    Table reference: 197
    TABH+  0(20) = 082D1E94E0C8119300000000C500000088010000
    TABH+ 20(20) = 01000000380900003000000004FC0100D0070000
    TABH+ 40( 8) = 04000000C1108001
    store        = 0x082D1E94
    ext1         = 0xE0C81193
    shmId        = 0     (0x00000000)
    id           = 197   (0xC5000000)
    label        = 392   (0x88010000)
    fill         = 1     (0x01000000)
    leng         = 2360  (0x38090000)
    loop         = 48    (0x30000000)
    xtyp         = TYPE#000027
    occu         = 4     (0x04000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x18081E94
    pgHook       = 0x00000000
    idxPtr       = 0x00000000
    shmTabhSet   = 0x00000000
    id           = 1541  (0x05060000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 4     (0x04000000)
    lineAlloc    = 4     (0x04000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0xA87F1B94
    collHook     = 0x00000000
    ext2         = 0x28940F93
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x70A22B93
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    XLIKP
    8000080015203CUSER14     06580920081014      Z0011000LF   X20081016200810152008101420081017200
    3333333333333455453322222333333333333332222225333333344222533333333333333333333333333333333333
    800008001520335352140000006580920081014000000A0011000C6000820081016200810152008101420081017200
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    <%_L195>
    CVBAP
    8000000012132000020T-AS301           T-AS301                                       0201     Su
    3333333333333333333524533322222222222524533322222222222222222222222222222222222222233332222257
    80000000121320000204D13301000000000004D1330100000000000000000000000000000000000000002010000035
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    MAT_AUF_HINWEIS_GEPRUEFT
    2
    0
    0
    0
    <%_L195>-UPDKZ
    UPDKZ_DELETE
    D
    4
    4
    0
    0
    IVBPA52_PAGIND
    0.0.1.
    000
    00C
    VBUK_KEIN_KREDITCHECK
    2
    0
    0
    0
    XLIPS[]
    Table IT_83[1x3552]
    PROGRAM=SAPMV50ADATA=XLIPS[]
    Table reference: 50
    TABH+  0(20) = E8F54D93F0282893000000003200000053000000
    TABH+ 20(20) = 01000000E00D0000FFFFFFFF0400000080330000
    TABH+ 40( 8) = 04000000C1108401
    store        = 0xE8F54D93
    ext1         = 0xF0282893
    shmId        = 0     (0x00000000)
    id           = 50    (0x32000000)
    label        = 83    (0x53000000)
    fill         = 1     (0x01000000)
    leng         = 3552  (0xE00D0000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000260
    occu         = 4     (0x04000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xD0896993
    pgHook       = 0x00000000
    idxPtr       = 0x00000000
    shmTabhSet   = 0x00000000
    id           = 410   (0x9A010000)
    refCount     = 1     (0x01000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 4     (0x04000000)
    lineAlloc    = 4     (0x04000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 2     (0x02000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0xC8402493
    collHook     = 0x00000000
    ext2         = 0x50E41293
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0xC8532493
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    VBUK_KREDIT_NEUAUFBAU
    2
    0
    0
    0
    LT_INB_CIFEXT
    Table IT_2692[1x476]
    PROGRAM=SAPMV50AFORM=BELEG_SICHERN_POSTDATA=LT_INB_CIFEXT
    Table reference: 1104
    TABH+  0(20) = C095F993B8301E940000000050040000840A0000
    TABH+ 20(20) = 01000000DC010000FFFFFFFF0400000090AC0100
    TABH+ 40( 8) = 10000000C1308401
    store        = 0xC095F993
    ext1         = 0xB8301E94
    shmId        = 0     (0x00000000)
    id           = 1104  (0x50040000)
    label        = 2692  (0x840A0000)
    fill         = 1     (0x01000000)
    leng         = 476   (0xDC010000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#002271
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xF077F993
    pgHook       = 0x00000000
    idxPtr       = 0x00000000
    shmTabhSet   = 0x00000000
    id           = 1542  (0x06060000)
    refCount     = 1     (0x01000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 2     (0x02000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x00000000
    collHook     = 0x00000000
    ext2         = 0x70E43294
    >>>>> 2nd level extension part <<<<<
    tabhBack     = 0x70041E94
    delta_head   = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
    pb_func      = 0x00000000
    pb_handle    = 0x00000000
    V50AGL-DISPLAY_FROM_ARCHIVE
    2
    0
    0
    0
    XLIKP-VBELN
    0080015203
    3333333333
    0080015203
    0000000000
    0000000000
    EMKPF
    4900035075200800000000000000          ##
    3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
    4900035075200800000000000000000000000010000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    VBMUE
    2222222222222222222
    0000000000000000000
    0000000000000000000
    0000000000000000000
    VBSK
    0000000000000000000000####   ####
    2222222222222222222222222233333333333333333333330000222000022222222222222222222222222222222222
    000000000000000000000000000000000000000000000000000C000000C00000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    PACKDATEN_VERBUCHEN
    2
    0
    0
    0
    No.       8 Ty.          FORM
    Name  BELEG_SICHERN_01
    IF_FINAL_CHECK
    2
    0
    0
    0
    LF_ONLY_FINAL
    2
    0
    0
    0
    LF_ONLY_PREPARE
    2
    0
    0
    0
    LF_FLAG_DOCNUM_NEW
    2
    0
    0
    0
    CF_SUBRC
    0
    0000
    0000
    T683V
    22222222222222222222222222222222222
    00000000000000000000000000000000000
    00000000000000000000000000000000000
    00000000000000000000000000000000000
    SY-XPROG
    SAPLBPFC
    5454454422222222222222222222222222222222
    310C206300000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    IF_RENUMBER
    X
    5
    8
    0
    0
    SPACE
    2
    0
    0
    0
    XVBPA_FIRSTIND
    0.0.1.
    000
    00C
    SY-REPID
    SAPMV50A
    5454533422222222222222222222222222222222
    310D650100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    IF_POST
    X
    5
    8
    0
    0
    SYST-REPID
    SAPMV50A
    5454533422222222222222222222222222222222
    310D650100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    XVBPA_AKTIND
    0.0.1.
    000
    00C
    No.       7 Ty.          FORM
    Name  BELEG_SICHERN
    %_DUMMY$$
    2222
    0000
    0000
    0000
    IVBPA2KEY
    000000
    22333333
    00000000
    00000000
    00000000
    IV_FINAL_CHECK_DURCHFUEHREN
    2
    0
    0
    0
    CHARX
    X
    5
    8
    0
    0
    LF_SUBRC
    0
    0000
    0000
    No.       6 Ty.          FORM
    Name  FCODE_SICH_OHNE_CHECK
    IVBPA1KEY
    000000
    33333322
    00000000
    00000000
    00000000
    T180-AKTYP
    V
    5
    6
    0
    0
    AKTYP-CREATE
    H
    4
    8
    0
    0
    CVBFA
    000000          000000 ####   ####        00000000000000                        0
    2222222222222333333222222222233333320000222000022222222333333333333332222222222222222222222223
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000C000000C00000000000000000000000000000000000000000000000
    XSDCTRLFLAG
    22
    00
    00
    00
    SYST
    |    ######################################T#######################################µ#########XP####
    000000000000000000000000000000800000005000000000000000000000000000000000000010B0001000AF550000
    0000100000000000000010601000104000000040006050407000000000000000000000000000C0500010300F800300
    00000000000000000000000000000000000000000000000000000000000000000000000000000000000000AF000000
    00000000000000000000000000000000000000000000000000000000000000000000000000000000000000BF00000C
    GC_FCODE_PODCANC
    ABBR
    4445222222222222222222222222222222222222222222222222222222222222222222
    1222000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    XSDCTRLFLAG-PROTSAVE
    2
    0
    0
    0
    YES
    X
    5
    8
    0
    0
    GC_FCODE_PODQUIT
    PODQ
    5445222222222222222222222222222222222222222222222222222222222222222222
    0F41000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    PROTOCOLCALLER-SDL
    SDL
    5442
    34C0
    0000
    0000
    GC_FCODE_PODSTOR
    PODS
    5445222222222222222222222222222222222222222222222222222222222222222222
    0F43000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000
    LIKP-VBELN
    0080015203
    3333333333
    0080015203
    0000000000
    0000000000
    LIPS-POSNR
    000010
    333333
    000010
    000000
    000000

    Hi
    As soon as we have started to put things into UPDATE TASK, we must
    54 ensure that errors definitely terminate the transaction.
    55 MESSAGE A is not sufficient because it can be catched from
    56 external callers which COMMIT WORK afterwards, resulting in
    57 incomplete updates. Read note 385830 for the full story.
    From the above message I think u need to read the not 385830 in tcode snote.
    Thx.

  • Since the most recent Firefox updates, I am having trouble with certain features on The New York Times website; I can no longer see certain weblog comments, or post comments, etc.

    This question is admittedly a little complicated. The New York Times website has a number of weblog pages which include brief stories followed by space for readers to leave comments. You probably need to be a Times On-Line subscriber to really see what I'm talking about, but some examples would be this City Room blog: http://cityroom.blogs.nytimes.com/2011/09/02/bloomberg-cancels-radio-talk-amid-furor-over-aides-resignation/ or this Arts Beat blog: http://artsbeat.blogs.nytimes.com/2011/09/01/theater-talkback-remembering-jerry-leiber-a-reluctant-pioneer-of-the-jukebox-musical/
    Since the most recent Firefox updates, when I view these pages, which traditionally have a number of reader comments at the bottom of the Times' story (or at least a space to leave a comment), I can no longer see the comments. There's simply empty. blank space. I know that the comments are there; if I open Internet Explorer and log on to the same page, the comments are suddenly visible. I don't understand where this problem has come from. I haven't noticed whether I'm missing seeing anything on other websites yet.
    I also cannot post comments on other parts of the Times website; while the pages dedicated to story-specific reader comment seem to load correctly and the space to type my comment does appear, I can't actually submit the comment. Repeated pressing of the "submit" icon has no effect. Once again, this works normally in IE.
    For the record, in the past week, I have changed my computer's anti-virus software from McAfee to Norton 360. I run Windows XP. If there's any another information I can provide, please advise, as I vastly prefer running Firefox to IE.

    If it happens again then try to reload the website or clear the cache and the cookies from that website.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • Billing doc while post goods issue

    Hi,
    Is there any Exit to creat a billing doc immediately when we post goods issue.
    Please, if there any other solution. don't hesitate.
    Thanks.

    You can use message condition record in outbound delivery ,as soon as you do PGI ,this message condition will trigger & it will create Billing document Back ground.Take ABAPer help he will guide you.

Maybe you are looking for