Display/Edit custom document attributes in PC-UI

Hi CRM Fellows,
we've customized via transaction DMWB - Document Modelling Workbench some additional attributes for the documents derived from Class CRM_P_ORD and CRM_L_ORD. Via the GUI in Transaction CRMD_BUS2000126 - Activities we can upload documents and maintain this attributes. But our client uses PC-UI and we try to show this attributes there. Unfortunately the Structure CRMT_BSP_CM_1O used to display the documents does NOT contain our required fields.
Has anyone come around such a problem? Is there a solution without modification? We have tried EEWB but there is no Object Type for the document management.
Hope anybody can help.
Regards
Robert

Hi Robert,
i have the same problem. We need this attributes for documentaiton purposes:
Author, Source, Valid until
I've created this attributes via transaction DMWB in the PHIO Class CRM_P_ORDER_V. In the SAP-GUI Transaction CRMD_BUS2000126 i can maintain this attributes.
Now it comes to PC-UI. The screen structure of the document management does not contain this fields. So I've created my own structure which includes the standard structure CRMT_BSP_CM_1O and my own structure. I've copied the access class CL_CRM_BSP_AM_CM_1O to ZCL_CRM_BSP_AM_CM_1O and did the customizing.
Now I see our custom attributes in the personalization of the Content Management but the Fields are not visible in the Table.
I think the problem is caused by the class CL_CRM_BSP_CM_SC which calls the access class. As far as I've seen in debugging it restricts the display to the content management standard fields.
What can we do? Is the only solution to include SAP-GUI via SAP Transaction IView? I hope not.
Regards
Gregor

Similar Messages

SRM Manager to Display/Edit Purchasing Document

Hi All,
We have configured SAP SRM 7.0 with PPS so that an end-to-end process starting from creating Shopping-Cart until Invoice can be performed successfully.
We have user called: BUYER, and MANAGER. Each of them able to perform end-to-end scenarios.
But until now, we cannot make MANAGER to display/edit any purchasing document such as Shopping-Cart, PO, Contract that is created by BUYER.
We have tried to put all available PFCG roles & portal roles to MANAGER which make MANAGER a super-user. But still, MANAGER cannot see BUYER's document.
We refer to the following URL for PFCG roles & portal roles:
http://help.sap.com/saphelp_srm70/helpdata/en/d7/4b8a5e1b324584a4aa16281f071a0a/frameset.htm
Does anybody have solution for this?
Thanks before.

Hi! About SC's, the only roles that are able to access SC from other users are:
Approver: only when the SC is awating approval;
Admin: through the monitor.
I hope this clarifies.
Best regards,
Christian Zeuch

Unable to display customs document in SAP GTS

Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,

Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards,

Display custom hosts attributes in Internal Identity Store

Any one know how to Display custom attributes to the Internal Identity Store
I have created several attributes, but can't seem to find anyway to add them to the display window.
Cheers

They are displayed by default and there's no actual way to hide them.
Are you sure that you didn't create a customer HOST attribute and are looking in the internal user table or vice-versa ? Host and users have different custom attributes page. That's the only explanation I See

Create/Edit "Custom Attributes" in Dynamic Distribution Groups

Hi,
I wanna create a Dynamic Distribution Group based on the users "title" and "company".
I've noticed that there are 15 "Custom Attributes" that I can edit in someway, I guess via PowerShell?
So what is the easiest way to accomplice this?

Hi,
Agree with the above suggestion, you can also bulk change the custom attributes:
Get-Mailbox -ResultSize Unlimited -Database Execs | Set-Mailbox -CustomAttribute1 “title”
http://dougg.co.nz/2012/05/01/bulk-setting-exchange-2010-custom-attributes/
to Edit Custom Attributes：
get-mailbox -filter {customattribute1 -eq ""} | set-mailbox -customattribute1 = "<value>"
And here is a reference about Create/Edit "Custom Attributes" in Dynamic Distribution Groups：
http://windowsitpro.com/exchange-server-2010/exchange-2010-sp2-value-custom-attributes
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support

Unable to find "Display/edit Attribute Sel " Button in the IP

Hi guys ,
BPS If we click on the Any planning level (Display) We will get tabs : char/Selection/Keyfigure/Description/Char Rels.
In the selection we have Display /edit Attribute Sel button there ..So that we can edit the Attribute Vales From to To.
Im very new to IP , I'm unable to find this options..
awaiting for your inputs...
Regards
tunath

Hi Kirill,
Thanks for your input ...But If we took as navigation attributes in that Modeler, Where is the option for the value restriction From & to...
Could you elaborate a bit..
Regards,
tunath

Problems displaying and editing long documents on small pages sizes

Problems displaying and editing long documents on small page sizes
I read this problem have called with the helpdesk they didn't know the solution but how can I find the solution:
In Pages 09, I can't scroll down andand click on text to edit it!! All the mouse will do is draw gray transparentboxes and not place the cursor in the text. Again, like the display problem, itdoesn't happen at the beginning of the doc, but starts showing up around 50 to60 pages in ... I can't select text at the bottom of pages ... at 50 pages, thecursor can be clicked into anyplace on a page. Further and further down, the unselectablearea on any particular page creeps up from the bottom line by line: at 175pages in the unselectable area is 12 lines high; at 360 pages in theunselectable area is 25 lines high. and finally at around 440 pages down, Icannot place the cursor anywhere on any page all the way to the end of thedocument.
I have Page versie 4.1

What you get was described here several times.
As we are end users like you, we can't change the app behavior.
Under 10.6.8 you have the buttons allowing you to scroll one line up or one line down.
Under Lion they are no longer available.
Yvan KOENIG (VALLAURIS, France) jeudi 18 août 2011 17:53:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How Do I Display Custom Document Properties On the Info - Properties Page

Hi,
I want to create a template using Microsoft Word 2010 that has fields similar to the Standard Document Property "Title" that can be used as a fillable form that repeats data throughout the document. I need a custom document property field
that you can fill out on the title page and will simultaneously change the same field that is in the header, footer, and file -> info -> properties page.
For example, I want to create a document property field called "Product ID #" that shows the title of the property on the file -> info -> properties page as "Product ID #" and the content to show up as the information
a user entered into the field on the first page.
Right now I have a standard document property that I am using as a field on the front page for the Title which has user defined content on the front page. This field has default content I set up to be "Product Specification Template".
I inserted this field by using quick parts. I want to be able to create a field that behaves like this called "Product ID #". I understand you can create custom form fields that repeat using legacy fields, but I need a way for them
to show changes instantly after you click away from the field, without having to "update field" where necessary.
Anyone have any idea how to create custom document properties like this? Or even how to rename standard properties such as "Status" or "Subject"?
Thanks

What you're asking can't all be done without a macro. You can easily enough get body content to show in the header & footer via the judicious use of Styles and STYLEREF fields (and the changes are dynamic), but getting that info into the custom
document property would require a macro. To that end, you might use a content control with a unique Style applied to it for the data input and a ContentControlOnExit macro to update the custom document property.
Cheers
Paul Edstein
[MS MVP - Word]

Rich Text Editor with Custom Text Attribute

Hello All,
We are using the latest version of Oracle Portal 10G. I have a need to create custom Attributes of the type text to let people enter a lot of text. But when User are in edit mode of an item where this custom attribute is used, the Rich Text Editor is not shown for entering the Text for the Custom Text Attribute. It shows a normal html text area. Has anyone ever used RTE with Custom Attribute?
I request you guys for help.
Thanks.

The Problem with the Custom Attribute is not solved, but I have now compromised with the Situation and now I am not using a Custom attribute.
Rather, Now I am creating a Custom Item Type using Base Text Type (earlier i wanted to create custom item type at my own without any base item type). In this case now I will not be able to change the Lable of the RTE (that is "Text", when the Custom Item is in Edit Mode), but I hope that my users can understand that much.
I have created a template for portal pages. In the Template I can edit the Region Properties. When I edit the Region property of the region where I want to display my Custom Items. I get two Tabs on the top, Main and Attributes/Style. ON the main tab I can tell what type of region it should be, width etc, in my case it is item type region. And on the Attributes/Style tab, I can select from the availabe Attributes as which all Attributes I want to display. Here if i select only "Associated Functions" Attribute then normally portal should not render anything by default on the Page. It should rather make a call to the procedure which is associated with the Custom Item and as when I was creating the custom item type, I had clicked on "Display Procedure Results With Item", so portal should now display the result of my Procedure. So far it works without problem.
But the problem is that the Portal displays the text at its own also. As i have written that Portal should not display anything at its own, this doesn't work in this version of Portal for a Custom Item Type that is made using Base Text Item Type. For all others it has worked till now (I have create 50s of Custom item types).
You can better understand by going to the following URL. Just have a look between the two dotted lines (Dotted line is also a seperate Custom Item Type). Between the two Dotted Lines is a custom item, in general it would be a Custom News Item having title, image and so on.
http://sunnode1.edvz.sbg.ac.at:7778/portal/page?_pageid=79,56047&_dad=portal&_schema=PORTAL
I have really programmed a lot with portal but now at this stage where I am near to end, I am getting problems which are coming from Product. I request you for help.

Linking Custom Document Properties to SharePoint

We currently have a Microsoft Office Add-in that, among other things, reads and writes Custom Document Properties. Our add-in includes a user-dialogue through which these values are captured and subsequently displayed within the document.
We now have a requirement to integrate this functionality with SharePoint 2010. In particular, we want our Office custom document properties to be co-ordinated with equivalent SharePoint server properties (i.e. site columns in Document Libraries) so that,
when a given SharePoint property value is changed the equivalent custom document property is also changed.
Users must be able to set the properties in either SharePoint or in an Office App (Word for example) and the changes be reflected in both places.
Our solution must work with the desktop versions of Office 2010/13 and the non-Office365 versions of SharePoint 2010/13.
During our initial prototyping we have looked at a number of possible approaches (including Document Property Promotion and Demotion) but are still not sure which appropriate to use.
With regard to Document Property Promotion and Demotion for example, we found that, if we create a document outside SharePoint, then invoke our add-in to set document properties, then upload the document to SharePoint; the SharePoint properties and the
Office Custom Document Properties are initially in step, any subsequent changes cause problems.
If we now change the SharePoint properties by editing them in SharePoint and then open the document in Word, the Custom Document Properties are unchanged. Similarly, any change we make in Word is not reflected in the
SharePoint properties when the document is saved back to the SharePoint library.
Our properties are all of type string in Word and type Choice in SharePoint.
For various reasons, our solution must not depend in any way on Office templates.
We would like to know what would be the recommended approach to implementing this functionality.
Below provides a basic diagram of our requirement:

Hi,
According to your description, you might want to sync the custom document properties between document and SharePoint Library.
A solution can be like this: We can add an Event Receiver to this library, it will be triggered when there is a file is checked in or the item of list is updated, then we can
read/write the specific document properties and sync between document and SharePoint Library.
The whole scenario would be like this: When a document is uploaded and checked in, the method put in the Event Receiver will be triggered and update the related columns of library.
When we updated these columns in library, we can capture the ItemUpdated event and update the corresponding properties of this document.
Here is a step by step sample on creating a simple Item added event receiver:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
For about how to update the custom properties of an Office Document, it is recommended you post another question to the Microsoft Office for Developers forum, you will get more
help and confirmed answers from there.
http://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Custom Document Style Upgrade Error

After we upgraded from 3.6.1 multi-user version to 11.1 multi-user version, when I log in (as the administrator) it immediately displays a window saying:
"The system is upgrading the custom document styles..."
However it ends with "Partial Custom Document Style Upgrade" saying not all of the documents were processed. When I view the activity log, it says:
"Could not find original style in brand."
What does this mean, and how do we fix this? We are unable to publish now.
Thanks.
Update - this was resolved by working with Oracle Support.
Edited by: user9288563 on May 9, 2012 11:06 AM

Update - this was resolved by working with Oracle Support.

Editable report - Element Attributes

Apex 4.1
The Element Attributes field under Column Attributes is not consistent in whether it expands #COL# substitutions.
1. Based on empirical observations, they are expanded for Select lists but not for the new Simple Checkbox type. I don't think any other editable display type works but I haven't tried all of them.
So if we need a simple checkbox in a report, it leads to awkward constructs like this in a custom report template
       <input type="checkbox" name="f49" class="edit"
              x:attr="foobar"
              x:pk="#PK#"
              value="Y"
              #CHECKED# />and a query like
decode(col,'Y','checked="checked"') checked
...It would be so much easier/declarative if the Element Attributes were to consistently expand #COL# substitutions so we could just put any CSS class and/or custom HTML attributes and use values from the current row.
2. Speaking of Simple Checkbox, it sometimes causes APEX to crash with the following Apache error
/wwv_flow.accept HTTP-404 \nwwv_flow.accept: SIGNATURE (parameter names) MISMATCH\nVARIABLES IN FORM NOT IN PROCEDURE: F03_NOSUBMIT\nNON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM: I am not able to consistently reproduce this but it is definitely a problem.
Also, it is not very obvious whether the List of Values attribute applies to the Simple Checkbox display type or not. It would appear that it uses a static LOV defined by STATIC2:;Y can someone from Oracle confirm this?
Thanks

Bump. Comments? Am I missing something? Thanks

Editing custom phone field list

I need to use a field for Nextel direct connect numbers. I have edited the template for new cards to have this field, but am trying to figure out how to select the field for existing cards without having to choose custom field for each card. The drop down list for the phone field contains many entries - I'm assuming there is some way to edit this list so my direct connect field appears with the other listings?

That is not JavaScript, but rather the show/hide field definition dictionaries. Using JavaScript will be the easiest method. I wouldn't edit the document this way as it is easy to damage it.
You can make it MUCH easier on yourself if you use a hierachical naming convention for your fields by giving each field in a particular group the same prefix, delimited by a "." character. For example:
GROUP1.name
GROUP1.address
GROUP2.name
GROUP2.address
This lets you how/hide an entire group with a single JavaScript statement. For example:
// Show all of the GROUP1 fields
getField("GROUP1").display = display.visible;
// Hide all of the GROUP2 fields
getField("GROUP2").display = display.hidden;
Post again if you need more help.

Unable to edit the document in sharepoint2010

Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekhar

Hi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Customer number needed in "GL a/c line item display" for customer gl?

Hi SAP Experts,
while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
How can i solve this problem?
Plz guide me.
I need a quick response.
Regards,
Biswa

Hi,
Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
I hope these helps.
Regards
Ravinagh Boni

Display/Edit custom document attributes in PC-UI

Similar Messages

Maybe you are looking for