Display of selected row no in table footer.

Hi,
Row no of first row is generally displayed in the footer of the table as
Row <first row rowno> of <total no of rows>.Eg Row 1 of 10.
Can this be changed to display row no of currently selected row insted of first row?
Thanks in advance,
Apurva.

Hi ,
You would not be able to extend the UI per se..
Instead you can make use of the property "firstVisibleRow" and "visiblerows" .
When a user clicks a button to bring down the entries by one
- increase the firstvisiblerow property by 1
when he wants to move to next page ,
- increase the firstvisiblerow property to firstvisiblerow+visiblerows
Use the table toolbar for scrolling..and placing your elements as it would always be properly aligned to your table..
Regards
Bharathwaj..

Similar Messages

How to display multiple selected rows in a table inside a popup?

Hi,
I have a table on which multiple selection is enabled. I am able to get hold of multiple selected rows i.e. i am able to iterate over the selected row keys and print their values. Now, my problem is how to display the contents of all the selected rows in a popup? I get the details of only one row when I launch the popup.
Thanks
Karan

Hi,
Not confident if this works or not but just try it...
1. create a ViewLink between the same view Object.
The source and destination wil be the same Vo and the source and destination attribute will be the pk of both Vos.
2. Update the changes in Appln Module.
Open the AM and in DataModel tab .
select the Same VO from which you created table in the DataModel Listbox and select the VL in the "Avaible View Objects" List Box. Add under it(selected vo in datamodel listbox).
3. Refresh DataControl accordion.
4. in your jsff page drag and drop the child vo as a table..
See if it works
Regards,
Santosh.

Display and edit currently selected row of ADF Table in ADF Form

I have an ADF Read-only Table and ADF Form, which were created from the same Data Control.
I need to be able to edit the selected row of the table in the form (just like in "Binding Data Controls to your JSF page" part of "Developing RIA Web Applications with Oracle ADF" Tutorial). However, I can't figure out how to do this :(
I found the following solution on the Web: #{bindings.DeptView1.currentRow.dataProvider.dname} - but it doesn't work, since "the class oracle.jbo.server.ViewRowImpl does not have the property dataProvider".
Sorry for the newbie question.
Thanks in advance for any help!

Hi,
AFAIK, dataProvider is not supported on ADF BC, hence the error.
If you have created ADF Read only table and form from the same data control you just need to refresh the form based on table selection to show up the selected record, to do which you just need to add partialTriggers property to the panelFormLayout and set its value to the id of table
Sireesha

Display all the rows in the table with Varray

I created two Varrays
CREATE TYPE phone_varray AS VARRAY(3) OF NUMBER(10);
CREATE TYPE email_varray AS VARRAY(3) OF varchar2(30);
CREATE TABLE ee
(id number(2),
phone phone_varray);
now i inserted some rows into ee table and displayed it as:
SELECT e1.id,e2.COLUMN_VALUE"PHONE NO" FROM ee e1,TABLE(e1.phone) e2;
ID PHONE NO
1 1111111111
1 2222222222
1 3333333333
1 1111111111
1 2222222222
1 4444444444
4 1111
4 2222
4 33334
5 1111
5 2222
5 33334
Then i altered the table with email_varray
desc ee;
Name Null? Type
ID NUMBER(2)
PHONE PHONE_VARRAY
EMAIL EMAIL_VARRAY
I updated some rows:
update ee e1 set email=email_varray('aasda') where id=4;
and when i try to display the table data by:
SELECT id,e2.*,e3.* from ee e1,TABLE(e1.phone) e2,TABLE(e1.email) e3;
it only displays the rows that contain all the details like
ID COLUMN_VALUE COLUMN_VALUE
4 1111 aasda
4 2222 aasda
4 33334 aasda
and not all the rows that are in the table which have id and phone and email as NULL
need help to display all the rows in the table.

will this work for you ?
SELECT e1.id,e2.COLUMN_VALUE as PHONE_NO, null as email FROM ee e1,TABLE(e1.phone) e2
union
SELECT e1.id,null,e3.column_value as email from ee e1, TABLE(e1.email) e3;

Passing selected rows in a table to Popup Iview

Hi all,
I have a main iview in which i search and display some data in a table. Users can select multiple rows from the table and upon clicking on a button in the table toolbar, all the selected rows should be passed to a popup iview.
But, when i tried, only one value is passed to the popup.
I need to update a set of rows together from the popup iview.
Is it a limitation of pop iviews in VC, or did i miss out anything?
I have selected "multiple select" option for the source table.
Can anyone advice us on this???
Thanks alot in advance
Shobin

Hi Sreeni,
Thanks alot for your reply.
As I saw in some forum posts in SDN, multiple data rows can not be passed to a pop up.
My application has a list of submitted appointment orders which the authorized person can approve. I wanted a popup in order to provide a confirmation message when the user multi select and approve many AOs together.
I found a work around without using pop ups. Instead, I used layers to show the confirmation message. I passed the selected rows to another table using signal in and out.
It works now.
Thanks alot
Shobin

Get values from selected row in a Table?

Hello.
I'm on VC 7.1 (the trial version downloaded from SDN).
I'm trying to figure out a way to retrieve some values from the currently selected row in a Table element through the output connector.
I have a web-service which returns results to the Table, and I want the user to be able to select one of the rows and then trigger another web-service call with some of the values from that row -- is this possible?
Also, I can't find any documentation that lists what can and can't be done with each UI element, is there something like this some where? (the Modeler's guide doesn't help, and the Reference guide seems to focus on menu items and what the VC screen looks like)
Thanks,
Alon

Hi Alon
This is a very simple task.
You just need drag the service which you want to execute, after select row, in model.
Drag output connector from table to input connector of service. Then map the parameter.
Regards
Marcos

How to set focus on a input field in a selected row of a table?

In a previous discussion (http://scn.sap.com/thread/3564789) I asked how to access an input (sap.m.Input) field of a selected row in a table. In the answer that was supplied I was shown how to get the items of the table. Then using the selected index to get the selected item get the cells. Then I could set editable on the proper cell(s). This worked fine.
Now I need to set the focus on one of the fields. I tried something like this:
            var oNewLink = table.getSelectedItem();
            var oNewLinkName = oNewLink.getCells()[1];
            oNewLinkName.focus();
But this doesn't seem to work.
I have searched through other discussions and have seen this technique for putting focus on a field if you have its ID:
sap.ui.getCore().byId(id_of_the_input_field).$().focus();
In my case though I do not have an ID since the row and its cells are generated. How can I set focus on the cell of a certain row in a table?

Hello Venkatesh. Yes that code does work. First I tried it on a table cell that was already rendered and it did work. The next time I tried it on a table row that was being added and it did not work there. So I added an on after rendering function for the table and added that code there. That did not work until I added a delay (timeout) to do a context switch before calling the focus and that worked.
Once last thing though sometimes when I call focus on an input field (actually in a table row cell) if the field has text in it already the flashing cursor is at the beginning of the text and other times it is at the end of the text (which is the desired way). It depends on where I click in the row. Is there anyway to make sure the flashing cursor is at the end of the text when the focus is applied to a field that contains text?

When iam selecting row of the table i got the exception

Hi ,
When iam selecting row in the table at that time iam getting below exceptions
<21/02/2013 1:31:35 PM EST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /InventoryPropertiesViewTF/InventoryPropertiesView URI: /com/avocent/trellis/apps/mainUi/inventory/pages/fragments/InventoryPropertiesView.jsff actual-URI: /com/avocent/trellis/apps/mainUi/inventory/pages/fragments/InventoryPropertiesView.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'BracketSuffix' returned null
<21/02/2013 1:31:35 PM EST> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /PropertyDisplayTF/PropertyDisplay URI: /com/avocent/trellis/apps/coreapps/ui/fragments/PropertyDisplay.jsff actual-URI: /com/avocent/trellis/apps/coreapps/ui/fragments/PropertyDisplay.jsff.
javax.el.PropertyNotFoundException: Target Unreachable, 'BracketSuffix' returned null
at com.sun.el.parser.AstValue.getTarget(Unknown Source)
Please Let me know why its getting this type exception only some time interemitten issue,
Please provide me any solution for these,
jdeveloper 1.1.1.4

Check your page code for an EL that uses 'BracketSuffix'. This is the point of error as the 'BracketSuffix' can't be evaluated at the given point.
Timo

Display of row index in table footer

Hi,
Row no of first row is generally displayed in the footer of the table as
Row <first row rowno> of <total no of rows>.Eg Row 1 of 10.
Can this be changed to display row no of currently selected row insted of first row?
Thanks in advance,
Apurva.

Hi ,
You would not be able to extend the UI per se..
Instead you can make use of the property "firstVisibleRow" and "visiblerows" .
When a user clicks a button to bring down the entries by one
- increase the firstvisiblerow property by 1
when he wants to move to next page ,
- increase the firstvisiblerow property to firstvisiblerow+visiblerows
Use the table toolbar for scrolling..and placing your elements as it would always be properly aligned to your table..
Regards
Bharathwaj..

How to maintain selected row in adf table displayed after refresh

Hi,
I am using jdev 11g
I my jsf page I have a table with multiple rows.
When i scroll and click on one of the rows its selected but if the page is refreshed the row is always selected but not displayed.
I need to be able to maintain the selected row after the refresh of the page, so my table will look like its already scrolled to the selected row..
I tried to use the attribute displayRow="selected" but it won't do the trick.
Any hints
Emile

Hi Branislav,
Kindly answer the following if you may.
Is there a way to refresh the table after the selectListner is fired.
Automatically when i select the table i need to refresh it.
Why after refresh the selected row changes skin.
Regards

Get selected row from af:table in backing bean

Hi Experts,
I have an af:table and i have seelctBoolean check box in that. If the user select 'x' nos of check boxes i want to display the row data of those selected rows. Can somebody help me in getting the selected row data in backing bean?
I am using adf faces and backing bean.
JSF Code:
<af:table value="#{demo.partyList}" var="row"
rowBandingInterval="0" binding="#{demo.t1}" id="t21"
rowSelection="multiple">
<af:column>
<af:selectBooleanCheckbox text="#{row.person_first_name}"
label="Label 1" id="sbc1"
/>
</af:column>
<af:column>
<af:inputText value="#{row.emirate}"/>
</af:column>
</af:table>
<af:commandButton action="#{demo.print}" text="Print"/>
BB Code:
public void print(){
// what code to write here
}

This is the code
JSF ::
<af:table value="#{createOpportunity.dataList}" var="row"
rowBandingInterval="0" binding="#{demo.t1}" id="t21">
<af:column headerText="Model">
<af:selectBooleanCheckbox text="#{row.modelRange}"
label="Label 1" id="sbc1" value="#{row.selected}"/>
</af:column>
<af:column headerText="Description">
<af:outputText value="#{row.description}"/>
</af:column>
<af:column>
<af:inputText value="#{row.quantity}"/>
</af:column>
</af:table>
<af:commandButton action="#{createOpportunity.print}" text="Print"/>
Backing bean Code::
public void print () {
selectedDataList = new ArrayList<ModelDescription>();
for (ModelDescription dataItem : dataList) {
if (dataItem.isSelected()) {
System.out.println(dataItem.getQuantity());
selectedDataList.add(dataItem);
// dataItem.setSelected(false); // Reset.
Clicking on the print button shows "We have 0 rows selected"
Thnks for ur replies guys ..
Edited by: Wannabe Java Guru on Mar 9, 2011 1:43 AM

How to delete or remove the selected row in a table

Dear Experts,
I'm facing a typical requirement in VC, similiar to variable selection screen in BI Queries :
I will have two tabes and if the user selects data from one table it will be moved to target table.I'm able to populate the target table with the value but I'm not able to delete the selected row from the source table.
Any help in this regard would be highlt appreciated.
Thankx in advance.
Regds,
Srinivasan.

Hi
Follow the following steps -
1. Create two buttons.One for 'delete row' and another one for 'insert row'.
2. Assign the proper system action as per the name.
2. Change the name of both buttons as common name.
3. To trigger the actions simultaneously add a star before the action.( For Example : *select)
4. Change the visibility of any one of the button as 'false'. (so it will not get displayed)
5. Now, if u click the visible button both actions will be triggered simultaneously.
Regards
Sandeep

How to capture a selected row in a table control in screen

Hello,
    I have a table in a screen and hv data in it also from a table.Now i want if a user selects a row n clicks a display button , i should display the same fields in empty text fields created outside the table on the same screen.
Rite now i m lookin for single selection but any help on multiple selection is also welcomed.
I have given a line-selection element name as 'LSELECT1' to the table in screen painter n have declared a variable also with the same name of type C(1) in my abap prog.But dont know wat to write in PAI now to caputure the selected row.
THANKS

Hi,
Use ALV to display your table records from FM 'REUSE_ALV_GRID_DISPLAY'.
In your internal table add a field with char1. This will show you the selected records by 'X' or ' '. Use this field in your layout like g_layout-box_fieldname = 'CHK'.
Here i used CHK TYPE CHAR1 added to internal table to display. Now ur ALV will be showing u a column to select records. U can select multiple records also. Evry selected record will reflect into internal table by modifying value of CHK as 'X'. Add button to ALV by creating PF-STATUS and add code its behavior when executed.
DATA: BEGIN OF ls_ekko,
      ebeln TYPE ekko-ebeln, " this is my internal table showed in alv
      bukrs TYPE ekko-bukrs,
      bstyp TYPE ekko-bstyp,
      bsart TYPE ekko-bsart,
      lifnr TYPE ekko-lifnr,
      ekorg TYPE ekko-ekorg,
      ekgrp TYPE ekko-ekgrp,
      waers TYPE ekko-waers,
      chk(1)   TYPE c, " check field
      END OF ls_ekko.
DATA it_ekko LIKE TABLE OF ls_ekko.
DATA : gt_fcat    TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       g_layout   TYPE slis_layout_alv,
       gt_fcat1    TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       g_layout1   TYPE slis_layout_alv.
g_layout-colwidth_optimize = 'X'.
g_layout-box_fieldname = 'CHK'. " adding check field to alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
   i_callback_program                = sy-repid
   i_callback_pf_status_set          = 'PF_STATUS_ALV'
   i_callback_user_command           = 'USER_COMMAND_ALV'
IT_EXCLUDING                      =
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
      is_layout          = g_layout
      it_fieldcat        = gt_fcat[]
      i_default          = 'X'
      i_save             = 'A'
    TABLES
      t_outtab           = it_ekko
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
*&      Form PF_STATUS_ALV
    Subroutine for PF status
     -->RT_EXTAB   text
FORM pf_status_alv USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'SELOBJ' EXCLUDING rt_extab.
ENDFORM.                    "PF_STATUS_ALV
Hope this help

How To Edit Selected Row In ALV Table

Hello Experts,
In My Webdynpro Application, I am displaying records from database table into an ALV Table.
I want to edit only selected record from ALV table.
Please Suggest How to achieve this.
Thanks,
Pratibha

The link given above is for the UI element 'Table' and does not pertain to ALV.
To Make an ALV Editable on lead selection for that particular lead selected row.
1. The ALV should be made lead selectable, when initializing
2. The ON_LEAD_SELECT function should be invoked.
3. Withing this function the index has to be retrieved to know which row was selected.
4. Based on the index retrived all the columns have to pass FALSE to read_only in the column properties.
Regards,
Pramod

A selected row in af:table does not get sorted.

Hi,
When a table supports single selection and the table contains quantity of rows gt it can fit into its viewport, then, on sorting, selected row gets out of the sorting process. But when you move to the end of the table, select a row there and then sort the table, then all rows sorted correctly. The selected row, after sorting, always set as a first row in the current viewport, doesn't matter whether it is in the order or out of it.
Noteworthy, when number of rows is lt the viewport allows:
1. sorting works as it should to;
2. on sorting/PPR'ing, as it gets some time, one can see how the viewport updates in two steps and in the first step the first row is the selected one.
JDev's version is 11.1.1.3.0.
VO, iterator and tree bindings, af:table all the props related to data retrieving, fetching and row displaying have default values.
What can cause that?
Thx,
Y.

Hi,
so what you are saying is that the selected table row is not sorted but added on top. I tried to reproduce this with 11.1.1.3 but can't see the issue. I tried with editable and read-only tables
Frank

Display of selected row no in table footer.

Similar Messages

Maybe you are looking for